Axis Communications AXIS Q2901-E PT Mount 9 mm Outdoor Thermal IP Bullet Camera

Technical Specification

Features:
  • Make: Axis Communications
  • Model code: AXIS Q2901-E PT Mount 9 mm
  • Series: Q29 Series
  • Resolution: 336 x 256
  • Digital (DSP): Yes
Read more
Additional info:

Delivers thermal imaging in 336x256 resolution Mounted on a pan-tilt motor, the camera can cover larger areas Supports up to six temperature alarm zones that can be used to trigger an alarm Offers two kinds of alarms triggered by a deviation of the temperature: if the temperature goes beyond a set limit, or if it increases too rapidly The spot temperature functionality is used to view the temperature of a particular area Isothermal palettes highlight temperature-spans in the image, visualizing hot spots to identify overheated equipment or areas

Read more
Make Axis Communications
Manufacturer Axis Communications
Model code AXIS Q2901-E PT Mount 9 mm
Series Q29 Series
Resolution 336 x 256
Digital (DSP) Yes
Specialist Type Thermal
Auto Iris Yes
Direct Drive Yes
Electrical Specifications Voltage: 8 ~ 20 V DC / 20 ~ 24 V AC / PoE
Power Consumption: 10 W / 11 W
Motion Activated Yes
Focal Length mm 9
Picture Elements HxV 336 x 256
Network Properties Image Frame Rate: 8.3 fps
Interface: RJ45 10BASE-T/100BASE-TX PoE
Network Protocols: IPv4/v6, HTTP, HTTPSb , SSL/TLSb , QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnPTM, SNMP v1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH
Auto Gain Control Yes
Compression Type H.264 (MPEG-4 Part 10/AVC) Main and Baseline Profile Motion JPEG
Physical Specifications Weight g: 1800
Environmental Specifications Protection: IP66
Operating Temperature oC: -40 ~ 60 C (-40 ~ 140 F)
Operating Humidity %: 10 ~ 100
Additional info
  • Delivers thermal imaging in 336x256 resolution
  • Mounted on a pan-tilt motor, the camera can cover larger areas
  • Supports up to six temperature alarm zones that can be used to trigger an alarm
  • Offers two kinds of alarms triggered by a deviation of the temperature: if the temperature goes beyond a set limit, or if it increases too rapidly
  • The spot temperature functionality is used to view the temperature of a particular area
  • Isothermal palettes highlight temperature-spans in the image, visualizing hot spots to identify overheated equipment or areas
Download PDF version