Axis Communications AXIS Q2901-E PT Mount 19 mm Outdoor Thermal IP Bullet Camera

Technical Specification

Features:
  • Make: Axis Communications
  • Model code: AXIS Q2901-E PT Mount 19 mm
  • Series: Q29 Series
  • Resolution: 336 x 256
  • Digital (DSP): Yes
Read more
Additional info:

Delivers thermal imaging in 336x256 resolution Mounted on a pan-tilt motor, the camera can cover larger areas Supports up to six temperature alarm zones that can be used to trigger an alarm Offers two kinds of alarms triggered by a deviation of the temperature: if the temperature goes beyond a set limit, or if it increases too rapidly The spot temperature functionality is used to view the temperature of a particular area Isothermal palettes highlight temperature-spans in the image, visualizing hot spots to identify overheated equipment or areas

Read more
Make Axis Communications
Manufacturer Axis Communications
Model code AXIS Q2901-E PT Mount 19 mm
Series Q29 Series
Resolution 336 x 256
Digital (DSP) Yes
Specialist Type Thermal
Auto Iris Yes
Direct Drive Yes
Electrical Specifications Voltage: 8 ~ 20 V DC / 20 ~ 24 V AC / PoE
Power Consumption: 10 ~ 11 W
Motion Activated Yes
Focal Length mm 19
Picture Elements HxV 336 x 256
Network Properties Image Frame Rate: 8.3 fps
Interface: RJ45 10BASE-T/100BASE-TX PoE
Network Protocols: IPv4/v6, HTTP, HTTPSb , SSL/TLSb , QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnPTM, SNMP v1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH
Auto Gain Control Yes
Compression Type H.264 (MPEG-4 Part 10/AVC) Main and Baseline Profile Motion JPEG
Physical Specifications Weight g: 1800
Environmental Specifications Protection: IP66
Operating Temperature oC: -40 ~ 60 C (-40 ~ 140 F)
Operating Humidity %: 10 ~ 100
Additional info
  • Delivers thermal imaging in 336x256 resolution
  • Mounted on a pan-tilt motor, the camera can cover larger areas
  • Supports up to six temperature alarm zones that can be used to trigger an alarm
  • Offers two kinds of alarms triggered by a deviation of the temperature: if the temperature goes beyond a set limit, or if it increases too rapidly
  • The spot temperature functionality is used to view the temperature of a particular area
  • Isothermal palettes highlight temperature-spans in the image, visualizing hot spots to identify overheated equipment or areas
Download PDF version

Related Whitepapers

How IP Surveillance Systems Can Reduce Business Energy Consumption

IP Opens Doors To A New World Of Physical Access Control

Thermal Imaging: Remote Temperature Monitoring