The city of Bologna has chosen Wisenet video surveillance cameras to help it create a smart traffic management system. Bologna is the seventh most populous city in Italy. It is at the center of a metropolitan area of approximately one million people with a diverse range of traveling requirements within a very large area.

The City has always invested in traffic control and monitoring systems with the aim to make travel easier and faster for its citizens. An example of this is a centralized traffic light management system which has been in operation since 2013 and has helped reduce travel times within the urban area.

Video surveillance solution

The purpose was to provide a tool to allow authorities to take strategic planning measures

The City wanted to invest in a video surveillance solution which would allow the monitoring of 12 vehicle access gates to the city in order to provide authorities with reliable real-time information about urban mobility. The purpose was to provide a tool to allow authorities to take strategic planning measures and optimally redistribute the traffic load on the road network.

After extensive research, which included the evaluation of a wide range of possible solutions, a decision was made to procure a total of 89 Wisenet cameras manufactured by Hanwha Techwin. The implemented solution consists of cameras dedicated to vehicle counting and classification, and ANPR cameras which have been installed on strategic gates. The cameras monitor both directions of travel to allow local authorities to study the most important and strategic vehicle access flows to the city.

Detecting illegally parked vehicles

This is made possible thanks to the latest generation of Wisenet cameras. By integrating high image quality and advanced video algorithms, Wisenet ‘intelligent’ cameras are able to enhance the value of video surveillance by supporting mobility and security in Smart Cities.

24 of the cameras installed are Wisenet XNO-6120R/TD bullet cameras equipped with Traffic Data

24 of the cameras installed are Wisenet XNO-6120R/TD bullet cameras equipped with Traffic Data, an edge based application developed in cooperation with Sprinx Technologies which facilitates the collection of statistical data about vehicle flow. By tracking the vehicles moving in a camera field of view, the application is able to provide information on vehicle counts, classification and average speed. 24 of the other cameras installed are Wisenet XNO-6120R/FNPs. These feature Roadway Licence Plate Recognition application which is able to help the local authority’s control room operators detect illegally parked vehicles and other traffic infringements.

Built-In IR illumination

Effective with all European number plate formats, the application has more than a 95% recognition accuracy whatever the environmental conditions, even when vehicles are moving at speeds of up to 150 km/h. The Wisenet XNO-6120R is a 2 megapixel bullet camera which is able to capture high definition images with the help of a 12x optical zoom, digital image stabilization with built-in Gyro sensor, a Defog feature and built-in IR illumination.

Part of the Wisenet X camera series, the XNO-6120R features the World’s best Wide Dynamic Range (WDR), which performs at up to 150dB to produce clear images from scenes that contain a challenging mix of bright and dark areas and normally result in overexposed or underexposed images.

Real time automatic incident detection

The Wisenet X series provides an opportunity to run on-board third-party video analytics plug-ins

The processing power of the Wisenet 5 chipset incorporated into the Wisenet X series provides an opportunity to run on-board third-party video analytics plug-ins for different applications, such as number plate recognition, vehicle counting/classification and real time automatic incident detection.

Completing the camera line-up are 41 Wisenet SNP-L6233RH 2 megapixel 23x IR PTZ dome cameras which have been carefully located at major road junctions throughout the city, in order to allow control room operators to zoom in to see close up detail of any incidents.

Traffic management solution

We are delighted with how easy it has been to successfully integrate the Wisenet cameras with our existing video management platform and our other supervision monitoring systems,” said Alberto Nuzzo, Head of Office 'Digital Infrastructure and Telecommunications', at Comune di Bologna, when commenting on the success of the traffic management solution.

The data captured by the Traffic Data and ANPR applications running onboard the cameras, is allowing us to far better manage the existing levels of traffic, whilst also helping us capture and store valuable data which we will be able to analyze to assist us to plan for the future. Our control room operators have been particularly impressed with the exceptional clarity of the images captured by the cameras and the data analytics capabilities of the system, which are enabling them to accurately visually verify what may be occurring and quickly take appropriate action.”

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

In case you missed it

Sanitization, Safety And Getting Back To Business
Sanitization, Safety And Getting Back To Business

You are not alone: operators everywhere are asking themselves what are they going to do? How are they going to get back to business, and fast? How are they going to cost-effectively operate with all the new safety requirements that have arisen as a result of COVID? How are they going to ensure it all gets done for the safety of customers and staff? How are they going to protect their brand from the negative exposure of being identified as a property with a reputation for COVID? The economic impact of COVID is expected to hit brick and mortar businesses the worst, as their businesses are dependent on people being physically present. According to a recent report by RBC, it is estimated that 70% of Americans expect to avoid public spaces, 57% of Canadians will be unwilling to attend conferences without a vaccine and 63% of people will prefer to drive vs fly.  This means, that for those of you in the business of travel, conferences, co-working spaces, retail stores, museums, art galleries, restaurants, sports arenas, hotels, cruises, airlines, resorts, theme parks, long-term care, education, etc. in the blink of an eye your approach to on-site safety just changed. To ensure your property is safe and secure, it is no longer just about access control, video surveillance and intruder alarms; it is also about sanitisation To get back to business and operating at full capacity after COVID, operations must find a way to eliminate the fear, uncertainty and doubt in the minds of their customers and employees. The affect of COVID-19 on safety and security To safely get back to business, the Centers of Disease Control and Prevention (CDC) emphasis that all operations need a pandemic response planJust like cybersecurity has had a direct impact on the IT strategy and budget, COVID will have a direct hit on the operations strategy and budget. To ensure your property is safe and secure, it is no longer just about access control, video surveillance and intruder alarms; it is also about sanitization, the lines between the security and maintenance just blurred. From customers, to employees, to government regulators, to management, the focus is now on operations and the sanitization policies, procedures and actions of the team. To put this change of priority into perspective, six months ago, sanitisation was not top of mind for people. Why, because it was not a life or death issue, we had other first world problems to garner our attention. From an operations perspective if we enabled a sanitization issue to become significant enough to impact the safety of customers and staff and therefore the brand, then that was an operational choice versus a mistake. Standards for sanitisation  Just like cybersecurity has had a direct impact on the IT strategy and budget, COVID will have a direct hit on the operations strategy and budgetThe issue is, today while the operating priority of sanitization has significantly increased, it is not measured and managed to the same standard as the other safety and security concerns across a business. Also, important to consider, while people may not hold an operation liable during this first wave, we can guarantee they are not going to be as understanding during the second wave or a future pandemic. To safely get back to business, the Centers of Disease Control and Prevention (CDC) and the Occupational Health and Safety regulators emphasis that all operations need a pandemic response plan and should follow these simple guidelines: Develop your plan Implement your plan Maintain and revise your plan While this sounds simple enough, keep in mind that requirements are constantly evolving and will continue to do so for the foreseeable future, or at least until all the research is in. To create an emergency response plan for a pandemic, properties must first determine what needs to be sanitized. The current requirements dictate that most surfaces and objects will just need a normal routine cleaning, it is only the frequently touched surfaces and objects like light switches and COVID has changed the game and made the digital transformation of operating procedures not a ‘nice-to-have’ but a must-havedoorknobs that will need to be cleaned and then disinfected to further reduce the risk of germs on surfaces and objects. The challenge is when you step back and consider what people touch in a day; the list quickly grows. After only 30 minutes, I easily came up with a list of over 60 items that one could call ‘high touch’! If you think about it, the list is extensive; telephones, doorknobs, drawer handles, counters, pens, keypads, computers, etc. and the list is only going to get longer as the research comes in.   The challenge is when you step back and consider what people touch in a day; the list quickly grows Operating efficiency  If we don’t change our ways, not only will we be doomed to continue making the same mistakes, but we will continue to be lost in paper and filing cabinetsTo scope the impact on operations as part of the plan, we must then find and identify all of those high touch things across the property. If we then combine that with the fact that CDC requires that all high touch locations must not only be cleaned more often, but that they also require that each location is first cleaned with soap and water, and then disinfected for one minute before finally being wiped down. This means a one-minute task just turned into a 4-minute task, that must now be completed multiple times a day. From a resourcing perspective this adds up quickly, and operating efficiency must be a priority. Not to mention it is going to get very complicated to measure and manage especially. Post COVID rules Getting back to business is going to be complicated; lots to do, lots of moving parts and no technology to help. The fundamental challenge to keep in mind is not that the sanitization requirements have evolved, the real issue is that for most businesses this area has been left unchanged for generations. Still today most rely on checklists, logbooks and inspections to manage the responsibilities of our front-line workers, which might have been fine before COVID. Post-COVID the rules have changed and so should the approach to managing physical operating compliance on the front lines. COVID like most physical operating requirements is tactical, detailed and specific; broad strokes, the honor system and inspections are not going to cut it. The digital transformation  COVID has changed the game and made the digital transformation of operating procedures not a ‘nice-to-have’ but a must-have. If we don’t change our ways, not only will we be doomed to continue making the same mistakes, but we will continue to be lost in paper, filing cabinets filled with checklists, never to be seen again. Only with the right data can we significantly improve the operational decisions necessary to accelerate our return to full operating capacity. At the end of the day, to fully recover, operations must eliminate the fear, uncertainty and doubt in the minds of customers and employees, only then can we really get back to business.

Which Security Technology Is Most Misunderstood, And Why?
Which Security Technology Is Most Misunderstood, And Why?

The general public gets much of its understanding of security industry technology from watching movies and TV. However, there is a gap between reality and the fantasy world. Understanding of security technologies may also be shaped by news coverage, including expression of extreme or even exaggerated concerns about privacy. The first step in addressing any challenge is greater awareness, so we asked this week’s Expert Panel Roundtable: Which security industry technology is most misunderstood by the general public and why?

Lessons Learned With Vanderbilt: How Have You Adapted To The COVID-19 Pandemic?
Lessons Learned With Vanderbilt: How Have You Adapted To The COVID-19 Pandemic?

With the postponement of tradeshows and events due to the effects of COVID-19, Vanderbilt and ComNet have taken their high quality, innovative solutions online, directly to their customer base. Through an Online Events and Training resource, you can stay connected with the brands’ top resources and products, as well as join upcoming product webinars hosted by their in-house experts. With a majority of the world currently working from home, businesses must respond to this changing landscape. As such, Vanderbilt and ComNet have turned to online resources to share new product demonstrations and other company news. One cornerstone of the ACRE brands approach was the launch of their Online Events and Training resource page. Ross Wilks, Head of Marketing Communications at Vanderbilt, credits this online resource as the anchor to their communicative success with customers at present. “Through weekly webinars delivered by our in-house experts, Vanderbilt and ComNet have embraced more virtual opportunities to continuously communicate to our customers regarding our latest and most relevant products,” he says. “To date, our webinars have covered a wide range of industry topics such as Why Physical Security and Cloud go together, and The most recent developments in card cloning and reader hacking. Attendance to these online events has proved popular and effective in keeping communication with our customer base open and engaging.” Each webinar ends with a Q&A section, as well as follow-up articles on the most asked questions, plus recordings of the webinars being made available to attendees. As such, the webinar approach has proven a receptive approach for Vanderbilt and ComNet. The Online Events and Training resource acts as a one-stop-shop for all virtual information. Overall, the page outlines the brands’ value-added resources for customers, including the ability to request a remote product demonstration, the availability of free online training, 24/7 access to the Vanderbilt webshop, plus the aforementioned weekly webinars. Vanderbilt and ComNet’s business mantra is built on a foundation of customer-focused core values such as empowerment, collaboration, and high performance and Wilks credits this mentality with their ability to keep information flowing to their base during the present pandemic. “The ACRE brands moved early to kick-start online webinars and ramp up awareness of their already existing online training and shopping options. Now more than ever, it is important to keep customers up to date on the latest offerings,” Wilks explains. “Our commitment has always been to make their customer’s security journey the best possible experience, and that is what this Online Events and Learning page primarily focuses on,” he concludes.