Pelco IMPS110-1S Day/Night Indoor IP Mini Dome Camera

Technical Specification

Features:

Make: Pelco
Model code: IMPS110-1S
Chip Inch Size: 1/4
Color Type: Color / Monochrome
Resolution TVL: 800 x 600

Additional info:

Pelco IMPS110-1S is a day/night indoor IP mini dome camera with remote zoom lens for wide angle or long range surveillance needs. It supports up to two simultaneous video streams and a third service stream as well as features a simple motion detection algorithm that allows the camera to record or send an alarm when there is motion detected in a selected zone or within the entire scene. The camera integrates with major third-party video management systems through the Pelco API and other third-party software and systems through the open ONVIF Profile S standard.

Contact manufacturer Contact manufacturer Datasheet Datasheet

Make	Pelco
Manufacturer	Pelco, Inc
Category	Video Surveillance>IP Dome cameras
Model code	IMPS110-1S
Chip Inch Size	1/4
Color Type	Color / Monochrome
Resolution TVL	800 x 600
Dome Type	PTZ
Sensitivity lux	0.01
Pan Speed ^o/ sec	Manual : 355
Tilt Speed ^o/ sec	Manual : 75
Indoor/Outdoor	Indoor
Digital (DSP)	Yes
Mount Type	Surface
Electrical Specifications	Voltage: PoE, 18 ~ 32 V AC Power Consumption: < 6 W
Focal length	2.8 ~ 10 mm
Rotation Angles^o	360
Compression	H.264 high or main profiles; and MJPEG
White Balance	Yes
Electronic Shutter range	1/5 ~ 1/10,000 sec
Network Properties	Interface: RJ-45 connector for 100Base-TX Network Protocols: TCP/IP, UDP, ICMP, IPv4, SNMP v2c/v3, HTTP, HTTPS, SSL, SSH, SMTP, FTP, RTSP, UPnP, DNS, NTP, RTP, RTCP, LDAP Image Frame Rate: 30 ips Inclusive DVR/ Web Server: MicroSDHC or SDXC card
Physical Specifications	Weight g: 610
Environmental Specifications	Operating Temp ^oC: -10 ~ +50 C (14 ~ 122 F) Operating Humidity %: 15 ~ 85
System Requirements	Web Browser: Microsoft Internet Explorer 8.0 and later
Additional info	Pelco IMPS110-1S is a day/night indoor IP mini dome camera with remote zoom lens for wide angle or long range surveillance needs. It supports up to two simultaneous video streams and a third service stream as well as features a simple motion detection algorithm that allows the camera to record or send an alarm when there is motion detected in a selected zone or within the entire scene. The camera integrates with major third-party video management systems through the Pelco API and other third-party software and systems through the open ONVIF Profile S standard.
Download PDF version Download PDF version