SightLogix Outdoor Video Analytic Systems Solve The Toughest Perimeter Security Problems
SightLogix Outdoor Video Analytic Systems Solve The Toughest Perimeter Security Problems

The SightLogix® Automated Outdoor Video System solves the toughest outdoor security problems, accurately detecting, assessing and locating intrusions over outdoor areas and perimeters in all weather and geographic conditions. The SightLogix system is built on open standards to integrate with all leading VMS and PSIM applications without middleware, custom integration or additional equipment. The system supports end-to-end data security, open IT standards and configurable bandwidth.By integrating many times the typical processing power at the "network edge," the SightLogix system eliminates variations from wind, lighting, foliage, moving clouds, shadows and vibrations. The benefit is increased coverage area with a high probability of target detection and greatly reduced nuisance alarms. Increased coverage also means fewer cameras and infrastructure, making SightLogix the most cost-effective solution for outdoor security.SightLogix systems are geo-registered to the scene, providing the "what" and "where" of security breaches, while accurately determining target size across a large field of view to filter out small animals and blowing debris.Using geo-registration, the system can display the coordinates of detected targets onto a sitemap for situational awareness and to automatically position PTZ cameras to zoom and follow targets.The SightLogix solution includes long range Thermal and Visible SightSensor® security cameras, SightTracker™ automated PTZ/Dome camera controllers for target identification, and SightMonitor™ coordination and GPS target location topology map display software.SightLogix remote systems are available in fixed, rapid deployment or mobile deployment. The net-centric SightLogix system is designed to operate over low-bandwidth wireless networks and can run on solar/battery power. SightLogix systems are deployed around the world, protecting assets in the desert heat to the frozen arctic. view larger image

Add to Compare

Video Surveillance software - Expert commentary

Tackling The Challenge Of The Growing Cybersecurity Gap
Tackling The Challenge Of The Growing Cybersecurity Gap

The SolarWinds cyberattack of 2020 was cited by security experts as “one of the potentially largest penetrations of Western governments” since the Cold War. This attack put cybersecurity front and center on people’s minds again. Hacking communication protocol The attack targeted the US government and reportedly compromised the treasury and commerce departments and Homeland Security. What’s interesting about the SolarWinds attack is that it was caused by the exploitation of a hacker who injected a backdoor communications protocol.  This means that months ahead of the attack, hackers broke into SolarWinds systems and added malicious code into the company’s software development system. Later on, updates being pushed out included the malicious code, creating a backdoor communication for the hackers to use. Once a body is hacked, access can be gained to many. An explosion of network devices What has made the threat of cyberattacks much more prominent these days has been IT's growth in the last 20 years, notably cheaper and cheaper IoT devices. This has led to an explosion of network devices. IT spending has never really matched the pace of hardware and software growth Compounding this issue is that IT spending has never really matched the pace of hardware and software growth. Inevitably, leading to vulnerabilities, limited IT resources, and an increase in IoT devices get more attention from would-be hackers. Bridging the cybersecurity gap In the author’s view, this is the main reason why the cybersecurity gap is growing. This is because it inevitably boils down to counter-strike versus counter-strike. IT teams plug holes, and hackers find new ones, that is never going to stop. The companies must continue fighting cyber threats by developing new ways of protecting through in-house testing, security best practice sources, and both market and customer leads. End-user awareness One of the key battlegrounds here is the education of end-users. This is an area where the battle is being won at present, in the author’s opinion. End-users awareness of cybersecurity is increasing. It is crucial to educate end-users on what IoT devices are available, how they are configured, how to enable it effectively, and critically, how to use it correctly and safely. Physical security network A valuable product that tackles cybersecurity is, of course, Razberi Monitor™, which is new to ComNet’s portfolio. Monitor™ is a software platform that provides a top-down view of the physical security network and ecosystem. Monitor™ is a software platform that provides a top-down view of the physical security network and ecosystem It monitors and manages all the system components for cybersecurity and system health, providing secure visibility into the availability, performance, and cyber posture of servers, storage, cameras, and networked security devices. Proactive maintenance By intelligently utilizing system properties and sensor data, Razberi’s award-winning cybersecurity software prevents problems while providing a centralized location for asset and alert management. Monitor™ enables proactive maintenance by offering problem resolutions before they become more significant problems. Identifying issues before they fail and become an outage is key to system availability and, moreover, is a considerable cost saving.

Physical Security And The Cloud: Why One Can’t Work Without The Other
Physical Security And The Cloud: Why One Can’t Work Without The Other

Human beings have a long-standing relationship with privacy and security. For centuries, we’ve locked our doors, held close our most precious possessions, and been wary of the threats posed by thieves. As time has gone on, our relationship with security has become more complicated as we’ve now got much more to be protective of. As technological advancements in security have got smarter and stronger, so have those looking to compromise it. Cybersecurity Cybersecurity, however, is still incredibly new to humans when we look at the long relationship that we have with security in general. As much as we understand the basics, such as keeping our passwords secure and storing data in safe places, our understanding of cybersecurity as a whole is complicated and so is our understanding of the threats that it protects against. However, the relationship between physical security and cybersecurity is often interlinked. Business leaders may find themselves weighing up the different risks to the physical security of their business. As a result, they implement CCTV into the office space, and alarms are placed on doors to help repel intruders. Importance of cybersecurity But what happens when the data that is collected from such security devices is also at risk of being stolen, and you don’t have to break through the front door of an office to get it? The answer is that your physical security can lose its power to keep your business safe if your cybersecurity is weak. As a result, cybersecurity is incredibly important to empower your physical security. We’ve seen the risks posed by cybersecurity hacks in recent news. Video security company Verkada recently suffered a security breach as malicious attackers obtained access to the contents of many of its live camera feeds, and a recent report by the UK government says two in five UK firms experienced cyberattacks in 2020. Cloud computing – The solution Cloud stores information in data centres located anywhere in the world, and is maintained by a third party Cloud computing offers a solution. The cloud stores your information in data centres located anywhere in the world and is maintained by a third party, such as Claranet. As the data sits on hosted servers, it’s easily accessible while not being at risk of being stolen through your physical device. Here’s why cloud computing can help to ensure that your physical security and the data it holds aren’t compromised. Cloud anxiety It’s completely normal to speculate whether your data is safe when it’s stored within a cloud infrastructure. As we are effectively outsourcing our security by storing our important files on servers we have no control over - and, in some cases, limited understanding of - it’s natural to worry about how vulnerable this is to cyber-attacks. The reality is, the data that you save on the cloud is likely to be a lot safer than that which you store on your device. Cyber hackers can try and trick you into clicking on links that deploy malware or pose as a help desk trying to fix your machine. As a result, they can access your device and if this is where you’re storing important security data, then it is vulnerable. Cloud service providers Cloud service providers offer security that is a lot stronger than the software in the personal computer Cloud service providers offer security that is a lot stronger than the software that is likely in place on your personal computer. Hyperscalers such as Microsoft and Amazon Web Service (AWS) are able to hire countless more security experts than any individual company - save the corporate behemoth - could afford. These major platform owners have culpability for thousands of customers on their cloud and are constantly working to enhance the security of their platforms. The security provided by cloud service providers such as Claranet is an extension of these capabilities. Cloud resistance Cloud servers are located in remote locations that workers don’t have access to. They are also encrypted, which is the process of converting information or data into code to prevent unauthorized access. Additionally, cloud infrastructure providers like ourselves look to regularly update your security to protect against viruses and malware, leaving you free to get on with your work without any niggling worries about your data being at risk from hackers. Data centres Cloud providers provide sophisticated security measures and solutions in the form of firewalls and AI Additionally, cloud providers are also able to provide sophisticated security measures and solutions in the form of firewalls and artificial intelligence, as well as data redundancy, where the same piece of data is held within several separate data centres. This is effectively super-strong backup and recovery, meaning that if a server goes down, you can access your files from a backup server. Empowering physical security with cybersecurity By storing the data gathered by your physical security in the cloud, you're not just significantly reducing the risk of cyber-attacks, but also protecting it from physical threats such as damage in the event of a fire or flood. Rather than viewing your physical and cybersecurity as two different entities, treat them as part of one system: if one is compromised, the other is also at risk. They should work in tandem to keep your whole organization secure.

Making School Safety A Priority With Smart Technology
Making School Safety A Priority With Smart Technology

With pupils in the UK set to go back to school on 8 March, there are a number of safety measures schools need to implement to ensure the health and wellness of the staff, students, and school communities.  The first lockdown and closure of schools brought on by the coronavirus pandemic fired a “warning shot” for education facilities managers, forcing head-teachers to re-examine school safety standards. Now that a third lockdown is here and schools have been shut down for a second time, anyone behind the curve with the benefits of smart technology should get on board now before children return to the school environment. And with the ever-changing variants of the COVID-19 virus, schools can’t afford to be “late to class” when it comes to health and safety. Preventing the spread of disease Some schools in the US have been using smart technologies for a while to measure utility consumption and efficiency, streamline maintenance and enhance general school safety. These technologies are playing a significant role in keeping school buildings healthy and preventing the spread of disease. Let’s take a look at how smart technology can help schools to become safer, as well as more energy-efficient and cost-effective.   Thermal detection cameras  Smart cameras placed at entry points of a school can remove the manual task of temperature testing Smart cameras placed at entry points of a school can remove the manual task of temperature testing. These cameras provide medically-accurate, real-time temperatures of individuals in real-time. If a high temperature is detected, the software sends an instant alert to the relevant party. It can also be set to deny access to those with high temperatures or to people not wearing masks.  Safer water  As the coronavirus continues to sweep through the world’s population, healthcare providers should also be on heightened alert for Legionnaires’ disease, another potential cause of pneumonia with similar symptoms. Legionella is a potentially deadly bacteria that can infect a school’s water supply and cause an outbreak of Legionnaire’s disease. It’s a school's duty of care to prevent Legionella infection by monitoring the risk of the bacteria proliferating.  Particularly as schools reopen and previously stagnant plumbing and cooling systems return to use, additional Legionella cases could rear their ugly head to emergency departments in the coming months. Traces of Legionella were recently found at a Worcestershire school. The school was forced to remain shut while treatment and testing took place. Automated flushing and temperature testing Instant alerts will notify relevant staff if water temperatures fall within “Legionella-friendly” parameters The Health and Safety Executive advises, “If your building was closed or has reduced occupancy during the coronavirus (COVID-19) outbreak, water system stagnation can occur due to lack of use, increasing the risks of Legionnaires’ disease… If the water system is still used regularly, maintain the appropriate measures to prevent legionella growth.” Typically, managing the risk of Legionella includes running all outlets for two minutes, taking and recording the temperature of the water to ensure that it’s not conducive to Legionella growth. This is a time-consuming process, which is why schools are looking for automated water temperature monitoring systems. This smart system with automated flushing and temperature testing reports and records water temperature data in real-time. Instant alerts will notify relevant staff if water temperatures fall within “Legionella-friendly” parameters.  Cleaner air  Advisers say that improving air filtration and ventilation in schools can help mitigate the potential airborne transmission of COVID-19. Strategies include: Increasing outdoor air ventilation Filtering indoor air Using portable air cleaners with HEPA filters  Smart building technologies such as advanced HVAC controls can help facilities managers promote cleaner air with less hassle. For example, smart HVAC systems use sensors to remotely monitor and control variables such as:  Humidity Temperature Indoor air quality The level of carbon dioxide and other pollutants The technology is also energy-efficient and cost-effective.  While these solutions may be key to the reopening of schools in the era of COVID-19, they also bring long-term benefits. Although COVID-19 may have accelerated the adoption of smart technology, many of these solutions are focused on health, wellness, and security in general; which have been needed in school systems for a long time.

Latest SightLogix news

SightLogix Announces The Launch Of Dual Sensor Analytics For Superior Outdoor Intruder Detection
SightLogix Announces The Launch Of Dual Sensor Analytics For Superior Outdoor Intruder Detection

SightLogix introduces a breakthrough in outdoor security that analyzes detected targets from both thermal and visible sensors simultaneously for high detection accuracy and reduced false alarms. Dual Sensor Analytics (DSA) is a major step forward for making a smart video system into a reliable, 24-hour security solution. Two eyes are always better than one, especially when they can see different things. Thermal video has long been recognized as an excellent human detector because it sees in the dark and ignores weather, shadows and reflections. At the same time, there are situations during the day where visible video can also detect with high reliability, while offering important scene details to assist analytic decision making. Highly trusted security result By comparing the activity of each independent sensor concurrently, DSA detects, rejects and validates thermal and visible activity in real-time, delivering a highly trusted security result. “Outdoor detection is the pillar on which we built our company,” said John Romanowich, President and CEO of SightLogix. “DSA gives our customers what they value most – the best intrusion detection, day and night.” Effective immediately, all SightSensor HD dual video cameras ship with DSA technology. Existing SightSensor HDs can be updated to DSA using the latest firmware.

Products Targeting Critical Infrastructure Include Video and Intelligent Solutions
Products Targeting Critical Infrastructure Include Video and Intelligent Solutions

Intelligent solutions, such as those derived from artificial intelligence, help critical infrastructure organizations make sense of vast amounts of data. These integrated applications, such as advanced video analytics and facial recognition, can automatically pinpoint potential breaches and significant events, and send alerts to the appropriate personnel, departments, and agencies. These solutions can be powerful in unifying disparate command center technologies, fusing critical data input from emergency calls and responder activity to enhance situational awareness. Electrical substations are particularly vulnerable (and in need of extra security) due to their role in power distribution and the nature of their equipment. The challenge power utilities worldwide are facing is finding an affordable solution, which can help detect, deter and facilitate an informed response to a substation security event. Data capture form to appear here! U.S. regulations In the United States, this need is furthered by the physical security mandate CIP-014 issued by the North American Electric Reliability Corporation (NERC), calling for identification of security issues, vulnerability assessments and deployment of appropriate processes and systems to address. CIP-014 identification of security issues, vulnerability assessments and deployment of appropriate processes and systems to address CIP-104 specifically calls for implemented security plans that include measures to deter, detect, delay, assess, communicate, coordinate and respond to potential physical threats and vulnerabilities. Manufacturers of video and other systems are designing products to serve the critical infrastructure market. For example, Dahua Technology offers explosion-proof cameras with a combination of rugged reliability and superior optics that is a fit for surveillance of explosive and corrosive environments, including chemical plants, refineries, and other facilities in the oil and gas industry. This explosion-proof series of cameras are housed in enclosures that are certified to the ATEX and IECEx standards for equipment in explosive atmospheres. Each explosion-proof camera features Dahua’s Starlight technology for ultra low-light sensitivity and high-definition sensors that deliver clear images in real-time. They are IP68-rated to prevent water and dust ingress. Each explosion-proof camera features Dahua’s Starlight technology for ultra low-light sensitivity and high-definition sensors that deliver clear images in real-time Video footage in extreme temperatures Another manufacturer, Videotec, offers a range of cameras and housings that provide video footage regardless of aggressive external factors, such as ice cold, scorching heat, desert sand, the force of sea or wind, total darkness, pollution, corrosion and even explosive agents. SightSensor thermal systems enable a utility to detect and respond to substation security incidents across multiple sitesSightLogix smart thermal camera systems have been deployed to protect substations for electric utilities and other critical infrastructure facilities. SightSensor thermal systems enable a utility to detect and respond to substation security incidents across multiple sites, ranging from copper theft to vandalism while also meeting regulatory compliance. At each substation facility, Thermal SightSensors are positioned along the perimeter, and are paired with a high-resolution pan-tilt-zoom camera for alarm assessment. When a Thermal SightSensor detects an intruder, the target’s location information is sent over the network to a SightTracker PTZ controller, which automatically zooms and steers PTZ cameras to follow the intruder. The target’s location is also displayed on a topology site map to provide real-time situational awareness. Alarms are sent to the utility’s 24-hour security operations center, which will contact law enforcement in real time when unauthorized intrusions are detected. Integrated intrusion detection and lighting systems The Senstar LM100 hybrid perimeter intrusion detection and intelligent lighting system is simplifying security at one U.S. electrical utility company. For years, the utility company had integrated its perimeter intrusion detection and lighting systems. The company has now installed the Senstar LM100 which provides detection and lighting in one product and saves them over $80,000 per site. The savings are a result of the reduction of electrical requirements, conduit, grounding, and associated labor, as well as the removal of certain equipment from project scope that are required for the two-system integration. The Senstar LM100’s perimeter LED-based lighting acts as an initial deterrent. If an intruder persists and an attempt to cut, climb or otherwise break through the fence is detected, the closest luminaire begins to strobe, and an alert is sent via a security management system. The intruder knows immediately they have been detected and that their exact location is known by security and others in the vicinity.

SightLogix Appoints Charlie Platipodis As The New Vice President Of Sales And Marketing
SightLogix Appoints Charlie Platipodis As The New Vice President Of Sales And Marketing

SightLogix, the technology pioneer for smart thermal camera systems, announces that Charlie Platipodis, a security industry veteran with over 30 years of executive sales leadership, has joined the company as vice president of sales and marketing. Charlie offered several factors that explained his rationale for joining SightLogix. “I was immediately struck by the company’s passion for building products on a foundation of great detection and high performance. Securing outdoors has always been hard, but SightLogix is really at the vanguard with a system that detects intruders at an impressively high level of reliability." Customer-Focused Company "There was also a long list of five-star customers," he continued, "who have the luxury to choose any security product but keep choosing SightLogix, because they recognize performance as the ultimate criteria. Finally, I saw a customer-focused company that listens to their partners to solve real problems with systems that are adaptable, affordable, and easy to use. In my experience, that’s a rare combination and a winning strategy.” We are thrilled to welcome Charlie Platipodis to SightLogix" “We are thrilled to welcome Charlie Platipodis to SightLogix,” said John Romanowich, SightLogix president and CEO. “Charlie’s vast experience implementing the processes and strategies for sales expansion will strengthen our existing critical infrastructure markets and accelerate our exposure among firms seeking to provide superior outdoor detection in the fast-growing remote video market.” Outdoor Perimeter Systems Charlie is a well-known and highly respected sales executive with an extensive record of success. Most recently, he served as vice president of sales and vice president of national accounts for SecurityLink, where he helped grow the company to number two in North America. Additionally, Charlie served as vice president of sales and marketing for GDI, a provider of end-to-end outdoor perimeter systems. Before entering the security industry, Charlie held executive leadership positions with Xerox Learning Systems and Learning International, where he implemented sales, coaching, and management programs, while additionally developing new channels of distribution and strategic alliances. For the last several years, Charlie has been helping companies formulate the strategy for sales, marketing and reorganisations as an independent consultant.

Related white papers

Delivering a Smart, Secure and Healthy Workplace with Cloud

Cloud Video and Smart Cities

Security Investments Retailers Should Consider For Their 2021 Budget