Rosslare Security Products Access Control Readers(36)
The Rosslare AY-R12 RGB Illuminated Reader presents a new concept in the security market whereby readers display ambiance modes preconfigured by the organization. The reader is wired to the controller and can be controlled by any panel to display colours at specified events via control inputs that connect to the host relay outputs. This most advanced reader adds a dramatic effect to any style-conscious environment.Main features:Stylish and practical application to add colour to any environment enabling a high-quality high-tech atmosphere. A must for designers.8 pre-programmed colour schemes that are enabled using wired inputsOptical Back and Cover Tamper sends a signal to the control panel when removal from wall or housing openingBuilt-in 125KHz reader for RFID cards with a read range of up to 8cmComplies with RoHS, WEEE, CE standards for international distributionApplications: Ideal for commercial and residential environmentsThe reader is suited for architects and designers looking for a stylish access control solution within indoor and outdoor environmentsAdd to Compare
Rosslare recently launched two new versions of the hardy yet stylishly designed anti-vandal smart card reader. The AY-Q6250 and its keypad version - the AY-Q6350 introduce a patented, industry first - Mifare technology encased in a metal body, combining smart card technology with an anti-vandal metal shield. Both units read the Mifare® ID Format through 13.56 MHz a remarkable range up to 45mm (1.8"). Find out why they will fare with the felons.The affordably priced AY-Q6250 Anti-Vandal Mifare® Contactless Smartcard Reader version is the secure way for a simple and reliable smart card upgrade. It supplements all the advantages of Mifare® technology to any standard access control system and comes with seven programmable output formats.The elegantly designed, highly secure AY-Q6350 Anti-Vandal Mifare® Smartcard Reader version comes with stylish blue backlit keypad. It is the latest addition to our Mifare® Card Reader series with a noteworthy ability to read Mifare® card serial number (CSN) from all ISO-14443A-3 type cards.Ultra resilient - Being epoxy potted, these water-resistant and vandal resistant units are fully sealed within an all-metallic housing, for improved performance in all weather conditions.Ultra compatible - The readers support seven programmable proximity card transmission formats, 26 to 40-Bit Wiegand or Clock & Data protocols. They feature a 6-wire cable interface for power, data, LED control input, and tamper status.Ultra secure - The AY-Q6350 provides extra security through a password-protected menu, an optical sensor for cover and wall tamper detection and a more secure "PIN plus card" mode. The unit also features a local programming menu with various programmable modes.Ultra stylish - The AY-Q6350 unit is ideal for installations where style, security and functionality are topmost priorities. The Blue Backlit 3x4 keypad also features a doorbell key function.Add to Compare
The AY-E20 is one of a highly sophisticated line of proximity card readers developed by Rosslare, pioneers and market leaders in the access control field. Ideal for residential and commercial applications, this ultra-slim attractively designed reader compliments any décor.The unit is water resistant but delicate, and is suitable for indoor or outdoor mounting.The AY-E20 is packed with advanced features such as an ultra-bright bi-colour LED indicator, optical back tamper detection, and selectable card transmission formats. The AY-E20 provides a high level of compatibility and connectivity with host controllers.Main features:Ultra-slim flush-mount design on flat surfaceReading distance: 3.5 cm (1.37 in)Built-In 125 KHz ASK EM proximity card readerInternal buzzer provides audible interface feedbackBi-coloured ultra bright LED indicatorFully potted, waterproof construction for outdoor useMounting template for easier installationApplications:Ideal for commercial and residential environmentsThe reader is suited for architects and designers looking for a stylish access control solution within indoor and outdoor environments.Add to Compare
The new AY-K25 and AY-H25 Readers have been designed to receive Mifare® Contactless Smartcard identification information with any standard access control system.Being highly adaptable and easily configurable, they are ideal for global companies seeking a uniform reader compatible with all international mounting standards. Featuring seven programmable output formats and a maximum range of seven centimetres, they easily comply with most system demands.Sealed and fully potted in polycarbonate UV plastic the readers are highly suitable for all outdoor weather conditions. Their tough structure combined with Rosslare's protection technology makes them highly tamper-resistant.The Readers are capable of reading card tags in the ISO-14443A Mifare® format. Mifare® is a registered trademark of Phillips Corp.Add to Compare
Long Range, Smart Card, Networkable, IP65, Surface mount, 7 programmable output formats reader output, LED, Wiegand Interface, 5 ~ 16 V DC, 35 mA @ 12 V, 110 x 75 x 15, 105, -31 ~ +63, 0 ~ 95, Tamper resistant, Comes with mounting template for easier installation.Add to Compare
Long Range, Proximity, Networkable, IP65, Surface mount, 7 programmable output formats reader output, LED, Wiegand Interface, 5 ~ 16 V DC, 25 mA @ 12 V, 80 x 40 x 12.8, 67, -31 ~ +63, 0 ~ 95, Tamper resistant, Comes with mounting template for easier installation.Add to Compare
Browse Access Control Readers
- Long Range
- Keypad Integrated
- Other Rosslare Security Products products
- Rosslare Security Products Intruder alarm system control panels & accessories
- Rosslare Security Products Access control software
- Rosslare Security Products Access control controllers
- Rosslare Security Products Access control systems & kits
- Rosslare Security Products Access control cards/ tags/ fobs
Access control reader products updated recently
Motion detection is a key feature of security systems in residential and commercial environments. Until recently, systems have relied heavily on closed circuit television (CCTV) and passive infrared (PIR) sensors, which both require significant investment and infrastructure to install and monitor. Developments in wireless technology are increasing home security possibilities. Few years ago, these developments led Cognitive Systems to discover that the wireless signals surrounding oneself can be used to detect motion. Known in the wireless industry as WiFi sensing, this technology brings many benefits that other motion detection solutions have not been able to provide. The working of WiFi sensing At Cognitive Systems, the company has used WiFi sensing technology to develop a motion detection solution called WiFi Motion™, which measures and interprets disruptions in RF signals transmitted between WiFi devices. When movement occurs in a space, ripples in the wireless signals are created. WiFi Motion interprets these ripples and determines if an action, such as sending a notification, is needed. Enabling this functionality in a space is incredibly simple. With a software upgrade to only one’s WiFi access point (or mesh router), motion sensing capabilities are layered into one’s WiFi network. Existing connected WiFi devices then become motion detectors without detracting from their original functions or slowing down the network. Using artificial intelligence (AI), WiFi Motion establishes a benchmark of the motionless environment and learns movement patterns over time, which could be used to predict trends. This allows unusual movement patterns to be detected with greater accuracy while decreasing the potential for costly false alerts. WiFi Motion requires no line-of-sight or installation WiFi sensing and other home monitoring solutions All of these capabilities are made possible by WiFi sensing and together create a motion detection system that provides unparalleled accuracy, coverage, privacy and affordability compared to other solutions on the market. PIR integration is far more complex and imposes electronic and physical design restrictions compared to WiFi sensing. In terms of placement, PIR systems are difficult to install, requiring line-of-sight and a device in every room for localization. WiFi Motion requires no line-of-sight or installation and is also a scalable solution compared to PIR. Much like cameras, PIRs can only cover so much space, but WiFi Motion can cover the entire home and even detect motion in the dark and through walls, without adding additional devices to the home. WiFi Motion detects less distinguishing context than cameras and microphones, but more context than regular PIR sensors for the perfect balance of privacy and highly accurate motion detection. Privacy solution While cameras have been the security solution for years, WiFi Motion offers a more affordable solution that can rival the privacy and coverage capabilities of even the most high-end cameras. With such a wide coverage area, one might think that WiFi sensing infringes on privacy, but actually, the opposite is true. With WiFi Motion, the contextual information collected cannot be used to identify a specific individual, unlike cameras which can clearly identify a person’s face or microphones, which can identify a person’s voice. It is different from other smart home security options that use cameras and microphones because it only senses motion using WiFi signals - it doesn’t “see” or “listen” like a camera or microphone would. This provides opportunities for added security in spaces where privacy might be a concern and installing a camera may not be a comfortable solution, such as bathrooms and bedrooms. The data collected is also anonymized and highly encrypted according to stringent industry privacy standards. Existing connected WiFi devices then become motion detectors Additional WiFi sensing applications Since WiFi sensing technology requires no additional hardware or subscription fees, it is much more affordable than other motion detection solutions. It can be used as a standalone solution, or it can be easily layered into more complex systems. This ease of integration, scalability and relatively low cost brings a lot of potential for various applications. Motion detection can trigger other smart devices in the network to turn lights on or off In eldercare, for example, WiFi sensing can be used to help seniors live comfortably in their homes for as long as possible. With the increasing aging population and high costs associated with care homes, the market for this application is considerable. Caregivers can use an app to monitor movement in their loved one’s home and be alerted about unusual movement patterns that could indicate a concern. For smart homes and other environments that have a network of smart devices, the artificial intelligence (AI) component of the technology allows for improvements to automated features. Motion detection can trigger other smart devices in the network to turn lights on or off or make adjustments to the temperature in a room. Security for the commercial sector For office buildings and other commercial properties, it is easy to see how all of these features could be scaled up to offer a highly accurate and cost-effective motion sensing and smart device automation solution. Cognitive Systems is closely involved with the development of WiFi sensing technology, working with various industry groups to establish standards and help it reach its full potential. WiFi Motion is merely the tip of the iceberg in terms of motion sensing possibilities, but its applications in the world of security are undeniably compelling. It is an exciting time for the wireless industry, as one works with stakeholders in the security space to explore everything this technology can do.
The emergence of smartphones using iOS and Android is rapidly changing the landscape of the IT industry around the world. Several industries, such as digital cameras, car navigation, MP3, and PNP, have been replaced by equivalent or even better performance using smartphones. Smartphones provide increasing portability by integrating the functions of various devices into a single unit which allows them to connect to platforms with network-based services and offer new services and conveniences that have never been experienced before. These changes have expanded into the access control market. Although not yet widespread, ‘Mobile access cards’ is one of the terminologies that everyone has been talking about. RF cards used for access security are being integrated into smartphones just as digital cameras and MP3s were in the past. While people might forget their access cards at home in the morning, they seldom forget their smartphones. Using smartphones for access control increases entry access reliability and convenience. Mobile/smartphone access control A key aspect of mobile credential is that it makes it possible to issue or reclaim cards without face-to-face interaction As in other markets, the combination of smartphones and access cards is creating a new value that goes beyond the simple convenience of integration enhancing the ability to prevent unauthorized authentication and entrance. People sometimes lend their access cards to others, but it is far less likely they might lend their smartphone with all their financial information and personal information – to another person. This overcomes an important fundamental weakness of RF cards. Another valuable aspect of mobile credential is that it makes it possible to issue or reclaim cards without face-to-face interaction. Under existing access security systems, cards must be issued in person. Since card issuance implies access rights, the recipient’s identification must be confirmed first before enabling the card and once the card has been issued, it cannot be retracted without another separate face-to-face interaction. Mobile access cards In contrast, mobile access cards are designed to transfer authority safely to the user's smartphone based on TLS. In this way, credentials can be safely managed with authenticated users without face-to-face interaction. Mobile cards can be used not only at the sites with a large number of visitors or when managing access for an unspecified number of visitors, but also at the places like shared offices, kitchens and gyms, currently used as smart access control systems in shared economy markets. The market share of mobile access cards today is low even though the capability can offer real benefits to users and markets. While the access control market itself is slow-moving, there are also practical problems that limit the adoption of new technologies like mobile access cards. Use of Bluetooth Low Energy technology While NFC could be an important technology for mobile credential that is available today on virtually all smartphones, differences in implementation and data handling processes from various vendors prevents universal deployment of a single solution to all devices currently on the market. Accordingly, Bluetooth Low Energy (BLE) has been considered as an alternative to NFC. Bluetooth is a technology that has been applied to smartphones for a long time, and its usage and interface are unified, so there are no compatibility problems. However, speed becomes the main problem. The authentication speed of BLE mobile access card products provided by major companies is slower than that of existing cards. Enhancing credential authentication speed Authentication speed is being continuously improved using BLE's GAP layer and GATT layers The second problem is that mobile access cards must be accompanied by a supply of compatible card readers. In order to use mobile access cards, readers need to be updated but this is not a simple task in the access control market. For 13.56 MHz smart cards (which were designed to replace 125 kHz cards), it has taken 20 years since the standard was established but only about half of all 25 kHz cards have been replaced so far. Legacy compatibility and the need for equivalent performance, even with additional benefits, will drive adoption timing for the Access Control market. While BLE technology helps resolve the compatibility problem of mobile access cards, it can identify some breakthroughs that can solve the speed problem. Authentication speed is being continuously improved using BLE's GAP layer and GATT layers, and new products with these improvements are now released in the market. Making use of key improvements allows Suprema's mobile access card to exhibit an authentication speed of less than 0.5 seconds providing equivalent performance to that of card-based authentication. AirFob Patch MOCA System's AirFob Patch addresses the need for technological improvements in the access control market in a direct, cost effective, and reliable way – by offering the ability to add high-performance BLE to existing card readers – enabling them to read BLE smartphone data by applying a small adhesive patch approximately the size of a coin. This innovative breakthrough applies energy harvesting technology, generating energy from the RF field emitted by the existing RF reader – then converting the data received via BLE back into RF – and delivering it to the reader. By adding the ability to use BLE on virtually any existing RF card reading device, MOCA allows greater ability for partners and end users to deploy a technologically-stable, high performance access control mobile credential solution to their employees, using devices they already own and are familiar with. Adding MOCA AirFob Patch eliminates the need to buy and install updated readers simply to take advantage of mobile credential, lowering costs and risks, and increasing employee confidence and convenience. Growth forecast of mobile access card market in 2020 In 2020, forecasts show that the mobile access card market will grow far more rapidly Several companies have entered the mobile access card market, but they have not set up a meaningful product solution stream until 2019. In 2020, forecasts show that the mobile access card market will grow far more rapidly. Reviewing new entries into the market allows identification of the latest products that provide improving solutions to compatibility and speed problems. MOCA AirFob Patch addresses development plans in process today that overcome the legacy installed base of card readers – allowing rapid creation of an environment that can make immediate use of BLE mobile access cards. Integrated mobile digital ID With proven usability and within suitable environments, mobile access cards will also begin to make inroads into other markets, not just the access control market. In the sharing economy market, which seeks access management without face-to-face interaction, the integrated mobile digital ID led by the 'DID Alliance' will serve as a technical tool that can be used in access authentication – forging increasing links between the access control and digital ID markets.
Entrance control and access control - of the physical kind - are common terms in the security industry which are often used interchangeably, but should they be? Having worked both sides of the fence, with previous roles at TDSi and HID and now the Major Accounts and Marketing Manager at Integrated Design Limited, Tony Smith highlights the subtle but important differences between these two terms and the systems they refer to, outlining how they should work together to achieve optimal security. Access control is a system which provides discriminating authentication Access control provides a discriminating authentication process and comprises the software or hardware that defines the criteria for acceptance or denial Used to describe a system which performs identification of users and authentication of their credentials (deciding whether or not the bearer of those credentials is permitted admission) access control is an incredibly broad term. Access control provides a discriminating authentication process and comprises the software or hardware that defines the criteria for acceptance or denial of an individual to a restricted area. Entrance control – such as security turnstiles - takes the output of that validation and has the capability to see whether that criteria is being adhered to, either granting or denying access as appropriate. Entrance control is the hardware responsible for keeping people honest If access control verifies authorized personnel using their credentials – their face, fingerprints, PIN number, fob, key card etc – and decides whether or not they are permitted access, entrance control is the hardware which enforces that decision by making users present their credentials in the correct way, either opening to allow pedestrian access or remaining closed to bar entry and potentially raising an alarm. For example, a card reader acts as an access control device, recognizing the card holder as having the correct permissions and saying ‘yes, this person can pass’. But, it’s the entrance control system – a turnstile, for example – which actually physically allows or denies access. Physical access and video surveillance Some entrance control systems don’t feature a physical barrier, however. Fastlane Optical turnstiles will not physically stop an unauthorized person from passing through, and instead alarm when someone fails to present valid credentials, alerting security staff that a breach has occurred. These kinds of turnstiles are suited to environments which just need to delineate between the public and secure side of an entrance, with less need to physically prevent unauthorized users from entering. State of the art access control integrations have been installed for award-winning complex, The Bower It’s also possible to capture video footage of any incidents, allowing security personnel to identify users failing to abide by the access control system’s rules, using It’s also possible to capture video footage of incidents, allowing security personnel to identify users failing to abide by access control system rules the footage to decide on the level of response required. The breach could have been the result of a member of staff being in a hurry and failing to show their card before passing through, in which case they can be reminded about the security protocol. Or, it could be an unidentified person who needs to be escorted from the premises. Entrance control and access control working together For optimum security, access control and entrance control should work together, with the entrance control system enhancing the use of the access control system, making it more efficient and better value for money. The two can’t effectively operate without each other. Security turnstiles, for example, require something to tell them that someone is about to enter – the access control system does this – and, the access control system needs a method of stopping people when they don’t badge in correctly. The two systems are complementary.
Rosslare Security, a leading global provider of professional solutions, is pleased to announce that it has received the UL294 Certification for its AC-825IP Networked Access Control platform. The AC-825IP incorporates a bi-directional push communication for enhanced data transmission speed and reliability to manage events in real time. The controller comes with one onboard expansion slot and can be further expanded by connecting up to 12 expansion boards via OSDP: R-805 – 12 outputs, S-805 – 12 inputs, D-805 – 4-door expansion, and P-805 – 16 inputs and 8 outputs. The AC-825IP features a new spacious and lockable metal enclosure that includes a control board, switch mode power supply, a built-in power management board/charger, sounder, and a revolutionary enclosure illumination bar that lights up when the enclosure is opened. Includes Pull-Safe Lockable Mechanism The metal enclosure also includes a Pull-Safe™ lockable mechanism for the C13/14 power connection to prevent accidental disconnection and tampering, another unique feature created by Rosslare Security. “Receiving UL Component Recognition for our network controllers’ platform shows customers that our products meet the industry’s highest security and safety standards.” said North America National Sales Manager, Rosslare Security Products, Inc.
Tri-Ed customers enjoy a night out at the ballgame following technical trainings and product Demos Tri-Ed Distribution's 2015 Stadium Tour wrapped up its cross country journey with a final stop in Denver, Colorado. These customer appreciation and training events attracted hundreds of dealers and integrators in Dallas, Los Angeles, Chicago, Philadelphia, Seattle and Denver. Training And Networking Opportunities The Tours included technical trainings across every product category, a manufacturer expo, product demos, dinner and a night at the ball game. Tri-Ed thanks all of its sponsoring vendors for their support of the Stadium Tours: ADT, Aiphone, Alarm.com, Altronix, Arecont Vision, Axis Communications, Bolide, Bosch, Canon USA, CNB, Digital Watchdog, D-Link, DSC, Exacq, FLIR, Geovision, Hikvision, Honeywell Fire Safety Americas, Inovonics, Interlogix, Kantech / Tyco, Kwikset, Legrand, Louroe, Middle Atlantic/Comnet, Monitronics, Napco, Nortek Security & Control, OpenEye, OT Systems, Panasonic, Paxton, Pelco, Primex, Rosslare, Rutherford Controls Int'l Corp., Samsung, Sentry, Sony, Vitek, and Vivotek. "Our 2015 Stadium Tour was designed to provide customers with valuable training and great networking opportunities with our staff and supplier partners," says James Rothstein, Tri-Ed Senior Vice President - Global Security Marketing. "The Tour was a huge success and also allowed us to show our customers how much we appreciate them."
Related white papers
5 Reasons To Integrate Mobile Technology Into Your Security Solution
11 Considerations For Embedded System RFID Readers
RFID and Smartphone Readers in Physical Access Control
A Brief History of Access Control CredentialsDownload
6 Questions To Ask When Choosing A Security SystemDownload
'Boosting On-Site Safety And SecurityDownload
IDEMIA Provides Frictionless Biometric Access Control For Václav Havel Airport Prague Staff With MorphoWave Compact
- Vanderbilt Secures A Hospital In Ireland With Access Control Integrated Solutions
- IDEMIA Provides Frictionless Biometric Access Control For Václav Havel Airport Prague Staff With MorphoWave Compact
- SMARTair® Secures Spanish Heritage School
- ASSA CLIQ® Remote System Secures Plant Control Rooms At Loughborough University