Kantech Access Controllers  (48)

The Kantech KT-2 is a two-door controller that supports two readers, incorporates Wi-Fi co...

Black metal cabinet with lock and keys

The Kantech KT-2 is a two-door controller that supports two readers, incorporates Wi-Fi co...

Conversion kit from existing KT-NCC installations

Gel cell battery, 12 V, 7 Ah

Wire-in transformer, 110 VAC/ 16.5 VAC (7 VA), UL approved

16.5 VAC 40 VA plug-in Transformer UL USA only

WiFi module and antenna add-on for KT-4-PCB

Power supply for KT-NCC-G2, requires a 16.5 VAC 40 VA transformer and a rechargeable batte...

SPI cable 92 cm (36 in)

RS-485 Input/Output Module; compatible with KT-4 and KT-1 controllers

Cabinet lock and 2 keys

Tamper switch

16.5 VAC 40 VA plug-in Transformer CSA. Canada only

Metal conversion plate, KT-NCC-PCB-G2 with power supply

Black metal cabinet with lock and keys

Removable terminal block

Accessory Kit: resistors (4x 1K Ω, 32x 5.6K Ω), ground wire, battery connector...

SPI cable 41 cm (16 in)

16-zone input module with 41 cm (16 in) SPI cable

The Kantech KT-2 is a two-door controller that supports two readers, incorporates Wi-Fi co...

Gel cell battery, 12 V, 12 Ah

Cabinet for up to 6 expansion modules, including lock, keys, and 92 cm (36 in) SPI cable

PoE, PoE+ and PoE++ module add-on for KT-4-PCB

16-zone output module with 41 cm (16 in) SPI cable

8-relay outputs module with 41 cm (16 in) SPI cable

Black plastic replacement cover, fits KT-1 and KT-1-PCB

The Kantech KT-2 is a two-door controller that supports two readers, incorporates Wi-Fi co...

Networkable, 2, Offline Capabilities, Networkable, RS-485/RS-232, 16 inputs, Universal / W...

Black metal cabinet, fits KT-1-PCB

The Kantech KT-2 is a two-door controller that supports two readers, incorporates Wi-Fi co...

128K memory.  Controls two doors and easily links to a network.  Automated troub...

The KT-100 firmware program is stored in flash memory for easy upload from the owrkstation...

One Door IP Controller - Supports 2 readers (entry and exit) Single touch-sensitive but...

Door controller with 128K memory and accessory kit (includes 1.0K ohm (2), 5.6 ohms (10),...

Controller with 512K memory and accessory kit (includes 1.0K ohm(2), 5.6K ohms (10), 120 o...

The Kantech KT-2 is a two-door controller that supports two readers, incorporates Wi-Fi co...

512K memory.  Controls two doors and easily links to a network.  Automated troub...

Optional Wi-Fi or POE++: Wi-Fi or POE++ connection for convenient connectivity End-to-e...

One Door IP Controller - Supports 2 readers (entry and exit) Single touch-sensitive but...