For one installer, Hikvision’s range of Turbo HD PIR-equipped cameras has had a dramatic impact on his business, allowing him to more efficiently monitor and secure construction sites and other valuable locations during vulnerable out of hours periods. Paul Hookings, Managing Director of Hampshire-based security installation firm Forward Securities, had a problem. His company had built a solid reputation for, amongst a variety of other services, securing building sites, notably the important materials and equipment left overnight and unattended in the site compound.

Building site compounds, Hookings explains, can include any number of super-valuable and enticing materials for potential thieves. “Diesel, copper, tools, cabling, right down to bricks, breeze blocks, agricultural fuel, road diesel, even the metal gates,” he says. “Thousands and thousands of pounds worth of stuff is stored there overnight.

Forward Securities would use traditional PIRs – passive infrared detectors – to raise an alert

Intrusion detection

To monitor these compounds for intruders, Forward Securities would use traditional PIRs – passive infrared detectors – to raise an alert when the compound perimeter was breached. The problem had to do with the PIRs, Hookings explains.

On critical sites like these, where there’s a lot of activity during working hours, people are able to move those PIRs in the daytime when they’re off,” he says. “And come night-time, they’re then able to return and rob the place without being picked up by the detectors, and then move the PIR back to where it was previously. Then it’s down to the security company, who end up scratching their heads, thinking: why didn’t that go off?

Passive infrared detectors

As a result, Hookings was on the lookout for a solution, something which would counter that potential for tampering and provide a more effective deterrent to potential thieves. Then he noticed that Hikvision had released a new range of Turbo HD PIR cameras.

These are lovely little products,” Hookings said. “When Hikvision brought them out, I binned our separate PIRs. With a PIR camera, during the armed period, if someone moves into its field of view, there’s an alarm. If someone covers it up, it goes into alarm. If someone moves it into another direction, it goes into alarm. So I’ve binned the products we were using previously and now I exclusively use Hikvision.

Turbo HD PIR cameras

The Turbo HD PIR camera range uses advanced video surveillance technologies to improve alarm accuracy and prevent intrusions. Video verification of alarms means a rapid response from a manned guarding service can be achieved.

The camera’s built-in PIR detector captures infrared light given off by human bodies and distinguishes it from other visual ‘noise’. It can be ‘double knocked’ with Hikvision’s Turbo HD K series DVR’s motion detection to reduce false alarms caused by moving targets without human body IR emission. This way, filtering false alarms reduces storage space and costs, and it also means more efficient post-event footage search.

Supplemental lighting

The camera also produces a flashing white strobe light that serves as a warning signal to stop intruders

The camera also produces a flashing white strobe light that serves as a warning signal to stop intruders. And the white light serves as supplemental lighting, enabling the camera to capture clear images of suspects as evidence when the alarm is triggered, even in extremely dark environments – such as the construction site compounds.

When we have an alarm triggered on one of our sites, we basically get a guaranteed guarding response,” Hookings says. “Because the combination of PIR detection and video serves as proof that the assailants are there. It’s a confirmed signal going to the monitoring station, and as a result we always get people apprehended.

PIRL bullet cameras

The model Forward Securities prefers to use is the DS-2CE12H0T-PIRL, a 5MP bullet PIR bullet camera referred to as the ‘PIRL’. They offer 2560 x 1944 pixel resolution, smart infrared illumination up to 20m, and Hikvision’s own ‘up the coax’ technology, which allows cameras to be controlled over a coaxial cable from the DVR and also to transmit the alarm signal to DVR.

They’re also IP67-rated for external use, so they’re tough and suitable for the sorts of environments, like construction sites, where they’re most needed. As an example of how he uses the Hikvision PIRL cameras, Hookings points to the example of one specific construction site currently being protected by Forward Securities.

Hikvision 4K cameras and hybrid DVRs

We use six PIRL cameras, as well as additional 4K Hikvision cameras running analytics and thermal cameras"

We’re securing the main compound, along with any remote sites,” he says. “We use six PIRL cameras, as well as additional 4K Hikvision cameras running analytics and thermal cameras, and they all sit on the same server, recording to a Hikvision Hybrid DVR, with alarms and images sent to our monitoring station.

Other site setups can include an audio warning system, particularly for very high value equipment. “That’s another place we’d use a PIRL,” Hookings says. “If someone, out of hours, walks up or even climbs the fence of the compound, the monitoring station is alerted to that by the PIRL camera, and they can immediately broadcast an audio warning, real time and live. That’s transmitted through the Hikvision DVR, to an amplifier and speakers.

Crime prevention and effective video surveillance

If the intruders persist despite the warning, we then get a guarding response. It’s not just big construction sites where the Turbo HD PIR cameras are effective, I do use them on other high value projects as well.

Ultimately, the Turbo HD PIRL cameras are incredibly effective,” Hookings says. “They pick up suspicious activity, including thefts and attempted thefts, three to four times a week across all of our sites. That means they’re actively helping to prevent the thefts of materials worth hundreds of thousands, sometimes millions of pounds.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

In case you missed it

Sanitization, Safety And Getting Back To Business
Sanitization, Safety And Getting Back To Business

You are not alone: operators everywhere are asking themselves what are they going to do? How are they going to get back to business, and fast? How are they going to cost-effectively operate with all the new safety requirements that have arisen as a result of COVID? How are they going to ensure it all gets done for the safety of customers and staff? How are they going to protect their brand from the negative exposure of being identified as a property with a reputation for COVID? The economic impact of COVID is expected to hit brick and mortar businesses the worst, as their businesses are dependent on people being physically present. According to a recent report by RBC, it is estimated that 70% of Americans expect to avoid public spaces, 57% of Canadians will be unwilling to attend conferences without a vaccine and 63% of people will prefer to drive vs fly.  This means, that for those of you in the business of travel, conferences, co-working spaces, retail stores, museums, art galleries, restaurants, sports arenas, hotels, cruises, airlines, resorts, theme parks, long-term care, education, etc. in the blink of an eye your approach to on-site safety just changed. To ensure your property is safe and secure, it is no longer just about access control, video surveillance and intruder alarms; it is also about sanitisation To get back to business and operating at full capacity after COVID, operations must find a way to eliminate the fear, uncertainty and doubt in the minds of their customers and employees. The affect of COVID-19 on safety and security To safely get back to business, the Centers of Disease Control and Prevention (CDC) emphasis that all operations need a pandemic response planJust like cybersecurity has had a direct impact on the IT strategy and budget, COVID will have a direct hit on the operations strategy and budget. To ensure your property is safe and secure, it is no longer just about access control, video surveillance and intruder alarms; it is also about sanitization, the lines between the security and maintenance just blurred. From customers, to employees, to government regulators, to management, the focus is now on operations and the sanitization policies, procedures and actions of the team. To put this change of priority into perspective, six months ago, sanitisation was not top of mind for people. Why, because it was not a life or death issue, we had other first world problems to garner our attention. From an operations perspective if we enabled a sanitization issue to become significant enough to impact the safety of customers and staff and therefore the brand, then that was an operational choice versus a mistake. Standards for sanitisation  Just like cybersecurity has had a direct impact on the IT strategy and budget, COVID will have a direct hit on the operations strategy and budgetThe issue is, today while the operating priority of sanitization has significantly increased, it is not measured and managed to the same standard as the other safety and security concerns across a business. Also, important to consider, while people may not hold an operation liable during this first wave, we can guarantee they are not going to be as understanding during the second wave or a future pandemic. To safely get back to business, the Centers of Disease Control and Prevention (CDC) and the Occupational Health and Safety regulators emphasis that all operations need a pandemic response plan and should follow these simple guidelines: Develop your plan Implement your plan Maintain and revise your plan While this sounds simple enough, keep in mind that requirements are constantly evolving and will continue to do so for the foreseeable future, or at least until all the research is in. To create an emergency response plan for a pandemic, properties must first determine what needs to be sanitized. The current requirements dictate that most surfaces and objects will just need a normal routine cleaning, it is only the frequently touched surfaces and objects like light switches and COVID has changed the game and made the digital transformation of operating procedures not a ‘nice-to-have’ but a must-havedoorknobs that will need to be cleaned and then disinfected to further reduce the risk of germs on surfaces and objects. The challenge is when you step back and consider what people touch in a day; the list quickly grows. After only 30 minutes, I easily came up with a list of over 60 items that one could call ‘high touch’! If you think about it, the list is extensive; telephones, doorknobs, drawer handles, counters, pens, keypads, computers, etc. and the list is only going to get longer as the research comes in.   The challenge is when you step back and consider what people touch in a day; the list quickly grows Operating efficiency  If we don’t change our ways, not only will we be doomed to continue making the same mistakes, but we will continue to be lost in paper and filing cabinetsTo scope the impact on operations as part of the plan, we must then find and identify all of those high touch things across the property. If we then combine that with the fact that CDC requires that all high touch locations must not only be cleaned more often, but that they also require that each location is first cleaned with soap and water, and then disinfected for one minute before finally being wiped down. This means a one-minute task just turned into a 4-minute task, that must now be completed multiple times a day. From a resourcing perspective this adds up quickly, and operating efficiency must be a priority. Not to mention it is going to get very complicated to measure and manage especially. Post COVID rules Getting back to business is going to be complicated; lots to do, lots of moving parts and no technology to help. The fundamental challenge to keep in mind is not that the sanitization requirements have evolved, the real issue is that for most businesses this area has been left unchanged for generations. Still today most rely on checklists, logbooks and inspections to manage the responsibilities of our front-line workers, which might have been fine before COVID. Post-COVID the rules have changed and so should the approach to managing physical operating compliance on the front lines. COVID like most physical operating requirements is tactical, detailed and specific; broad strokes, the honor system and inspections are not going to cut it. The digital transformation  COVID has changed the game and made the digital transformation of operating procedures not a ‘nice-to-have’ but a must-have. If we don’t change our ways, not only will we be doomed to continue making the same mistakes, but we will continue to be lost in paper, filing cabinets filled with checklists, never to be seen again. Only with the right data can we significantly improve the operational decisions necessary to accelerate our return to full operating capacity. At the end of the day, to fully recover, operations must eliminate the fear, uncertainty and doubt in the minds of customers and employees, only then can we really get back to business.

Which Security Technology Is Most Misunderstood, And Why?
Which Security Technology Is Most Misunderstood, And Why?

The general public gets much of its understanding of security industry technology from watching movies and TV. However, there is a gap between reality and the fantasy world. Understanding of security technologies may also be shaped by news coverage, including expression of extreme or even exaggerated concerns about privacy. The first step in addressing any challenge is greater awareness, so we asked this week’s Expert Panel Roundtable: Which security industry technology is most misunderstood by the general public and why?

Lessons Learned With Vanderbilt: How Have You Adapted To The COVID-19 Pandemic?
Lessons Learned With Vanderbilt: How Have You Adapted To The COVID-19 Pandemic?

With the postponement of tradeshows and events due to the effects of COVID-19, Vanderbilt and ComNet have taken their high quality, innovative solutions online, directly to their customer base. Through an Online Events and Training resource, you can stay connected with the brands’ top resources and products, as well as join upcoming product webinars hosted by their in-house experts. With a majority of the world currently working from home, businesses must respond to this changing landscape. As such, Vanderbilt and ComNet have turned to online resources to share new product demonstrations and other company news. One cornerstone of the ACRE brands approach was the launch of their Online Events and Training resource page. Ross Wilks, Head of Marketing Communications at Vanderbilt, credits this online resource as the anchor to their communicative success with customers at present. “Through weekly webinars delivered by our in-house experts, Vanderbilt and ComNet have embraced more virtual opportunities to continuously communicate to our customers regarding our latest and most relevant products,” he says. “To date, our webinars have covered a wide range of industry topics such as Why Physical Security and Cloud go together, and The most recent developments in card cloning and reader hacking. Attendance to these online events has proved popular and effective in keeping communication with our customer base open and engaging.” Each webinar ends with a Q&A section, as well as follow-up articles on the most asked questions, plus recordings of the webinars being made available to attendees. As such, the webinar approach has proven a receptive approach for Vanderbilt and ComNet. The Online Events and Training resource acts as a one-stop-shop for all virtual information. Overall, the page outlines the brands’ value-added resources for customers, including the ability to request a remote product demonstration, the availability of free online training, 24/7 access to the Vanderbilt webshop, plus the aforementioned weekly webinars. Vanderbilt and ComNet’s business mantra is built on a foundation of customer-focused core values such as empowerment, collaboration, and high performance and Wilks credits this mentality with their ability to keep information flowing to their base during the present pandemic. “The ACRE brands moved early to kick-start online webinars and ramp up awareness of their already existing online training and shopping options. Now more than ever, it is important to keep customers up to date on the latest offerings,” Wilks explains. “Our commitment has always been to make their customer’s security journey the best possible experience, and that is what this Online Events and Learning page primarily focuses on,” he concludes.