The migration from traditional access control technology to newer technology can be costly and painful if not planned and implemented in the right way
A planned migration provides the ability to plan, budget and control the path to an improved access control environment

The installed base of legacy systems presents opportunities and obstacles for providers of newer access control systems. Most end users would prefer not to do a full rip-and-replace upgrade. Therefore, integrators (and manufacturers) have to find a smooth transition path. Access control customers eager to embrace the newest capabilities on the market are often faced with a daunting question: How do I get there from here?

 “The migration from traditional access control technology to newer technology can be costly and painful if not planned and implemented in the right way,” says Jason Ouellette, product line director, access control, Tyco Security. He points out the importance of looking for solutions that allow end users to continue to leverage a legacy installation base while transitioning to newer technologies.

A planned migration provides the ability to plan, budget and control the path to an improved access control environment with very few tradeoffs and avoiding a one-time large budget cost, says Ouellette. “A strong integration platform, unified server capability and flexible collaborative client interfaces can support this type of migration,” he says. “One more important piece of the puzzle is a strong history of being able to support legacy hardware over a longer migration period. Forklift exercises are difficult to manage and justify in the budget, so time is needed to allow for a controlled and phased-in update of hardware from old to new.”

Can yesterday’s product continue to be supported, then upgraded and transitioned to tomorrow’s solution with minimal to no downtime? Greg Hetrick, PCSC’s director of marketing, says technology must support legacy systems and also be backward-compatible and database- and hardware-upgradable.

Where does it leave integrators and end users if an access control manufacturer abandons the ability to accommodate legacy controllers and wiring with their new software? That makes rip-and-replace the only option, says Robert Laughlin, president of Galaxy Control Systems. However, Laughlin says if analog twisted-pair cabling with 485 or 422 protocols is present, it can often be used along with the installed readers and only the controllers need to be replaced, thus saving time and money. “In some instances the existing controllers installed throughout a facility can even be re-engineered so they also do not need to be replaced,” he says. “Only the centralized software at the head-end needs to be replaced.”

Bringing uniformity to an existing or new installation is easier with software-based controllers that are backward-compatible and promote best-of-breed solutions, says Laughlin.

“The opportunity for integrators is keeping end users informed on the latest technologies, upgrading when appropriate, staying ahead of the curve, and preventing risks in all aspects of access control and security”

Expanding the benefits of existing systems is another way to increase business for integrators. Software-based systems have increased the potential for new business development outside the conventional physical security domain, says Laughlin. He gives an example of a school system that was looking for a better way to manage student traffic among a large number of portable classrooms being used while a new facility was being constructed. A main concern centered on children using restrooms and other facilities located in the main school building throughout the course of the day. “School administrators wanted a way to track student movements efficiently beyond issuing conventional written hall passes,” he says. In lieu of hall passes, proximity devices were issued for use with access readers in the classrooms and at all entrances to the main school building. Now students are monitored and allocated a predetermined amount of time to walk from their classroom to the building. If a student fails to report in the given time period, the system issues a general alert.

Innovation is making access control installation easier and more effective, whether in a new application or an upgrade. There’s a trend toward network appliances that come pre-configured for easier and more efficient on-site system setup, application installation and customization. For example, on-board capabilities will allow users to connect to the network appliance by launching a shortcut from any LAN-connected PC. This capability will greatly reduce installation time by eliminating the need to deploy or install software and servers, says Laughlin. 

Access control systems will continue to be a focal point of an organization’s physical security systems. From a single control platform, users can monitor the state of a facility as well as share data with other systems such as video surveillance and video management, visitor management, time and attendance, alarms, photo-imaging, badging, elevator control and building management.

Further in the future, wireless communication will eventually replace Ethernet cables. Also, alternative power (think: solar/battery/conductive charging) as wireless power platforms will replace wired power. Cloud backup for local and offline recovery will become essential. “The opportunity for integrators is keeping end users informed on the latest technologies, upgrading when appropriate, staying ahead of the curve, and preventing risks in all aspects of access control and security,” says Hetrick.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version Download PDF version

Author profile

Larry Anderson Editor, SecurityInformed.com & SourceSecurity.com

An experienced journalist and long-time presence in the US security industry, Larry is SecurityInformed.com's eyes and ears in the fast-changing security marketplace, attending industry and corporate events, interviewing security leaders and contributing original editorial content to the site. He leads SecurityInformed's team of dedicated editorial and content professionals, guiding the "editorial roadmap" to ensure the site provides the most relevant content for security professionals.

In case you missed it

Water Plant Attack Emphasizes Cyber’s Impact On Physical Security
Water Plant Attack Emphasizes Cyber’s Impact On Physical Security

At an Oldsmar, Fla., water treatment facility on Feb. 5, an operator watched a computer screen as someone remotely accessed the system monitoring the water supply and increased the amount of sodium hydroxide from 100 parts per million to 11,100 parts per million. The chemical, also known as lye, is used in small concentrations to control acidity in the water. In larger concentrations, the compound is poisonous – the same corrosive chemical used to eat away at clogged drains. The impact of cybersecurity attacks The incident is the latest example of how cybersecurity attacks can translate into real-world, physical security consequences – even deadly ones.Cybersecurity attacks on small municipal water systems have been a concern among security professionals for years. The computer system was set up to allow remote access only to authorized users. The source of the unauthorized access is unknown. However, the attacker was only in the system for 3 to 5 minutes, and an operator corrected the concentration back to 100 parts per million soon after. It would have taken a day or more for contaminated water to enter the system. In the end, the city’s water supply was not affected. There were other safeguards in place that would have prevented contaminated water from entering the city’s water supply, which serves around 15,000 residents. The remote access used for the attack was disabled pending an investigation by the FBI, Secret Service and Pinellas County Sheriff’s Office. On Feb. 2, a compilation of breached usernames and passwords, known as COMB for “Compilation of Many Breaches,” was leaked online. COMB contains 3.2 billion unique email/password pairs. It was later discovered that the breach included the credentials for the Oldsmar water plant. Water plant attacks feared for years Cybersecurity attacks on small municipal water systems have been a concern among security professionals for years. Florida’s Sen. Marco Rubio tweeted that the attempt to poison the water supply should be treated as a “matter of national security.” “The incident at the Oldsmar water treatment plant is a reminder that our nation’s critical infrastructure is continually at risk; not only from nation-state attackers, but also from malicious actors with unknown motives and goals,” comments Mieng Lim, VP of Product Management at Digital Defense Inc., a provider of vulnerability management and threat assessment solutions.The attack on Oldsmar’s water treatment system shows how critical national infrastructure is increasingly becoming a target for hackers as organizations bring systems online “Our dependency on critical infrastructure – power grids, utilities, water supplies, communications, financial services, emergency services, etc. – on a daily basis emphasizes the need to ensure the systems are defended against any adversary,” Mieng Lim adds. “Proactive security measures are crucial to safeguard critical infrastructure systems when perimeter defenses have been compromised or circumvented. We have to get back to the basics – re-evaluate and rebuild security protections from the ground up.” "This event reinforces the increasing need to authenticate not only users, but the devices and machine identities that are authorized to connect to an organization's network,” adds Chris Hickman, Chief Security Officer at digital identity security vendor Keyfactor. “If your only line of protection is user authentication, it will be compromised. It's not necessarily about who connects to the system, but what that user can access once they're inside. "If the network could have authenticated the validity of the device connecting to the network, the connection would have failed because hackers rarely have possession of authorized devices. This and other cases of hijacked user credentials can be limited or mitigated if devices are issued strong, crypto-derived, unique credentials like a digital certificate. In this case, it looks like the network had trust in the user credential but not in the validity of the device itself. Unfortunately, this kind of scenario is what can happen when zero trust is your end state, not your beginning point." “The attack on Oldsmar’s water treatment system shows how critical national infrastructure is increasingly becoming a target for hackers as organizations bring systems online for the first time as part of digital transformation projects,” says Gareth Williams, Vice President - Secure Communications & Information Systems, Thales UK. “While the move towards greater automation and connected switches and control systems brings unprecedented opportunities, it is not without risk, as anything that is brought online immediately becomes a target to be hacked.” Operational technology to mitigate attacks Williams advises organizations to approach Operational Technology as its own entity and put in place procedures that mitigate against the impact of an attack that could ultimately cost lives. This means understanding what is connected, who has access to it and what else might be at risk should that system be compromised, he says. “Once that is established, they can secure access through protocols like access management and fail-safe systems.”  “The cyberattack against the water supply in Oldsmar should come as a wakeup call,” says Saryu Nayyar, CEO, Gurucul.  “Cybersecurity professionals have been talking about infrastructure vulnerabilities for years, detailing the potential for attacks like this, and this is a near perfect example of what we have been warning about,” she says.  Although this attack was not successful, there is little doubt a skilled attacker could execute a similar infrastructure attack with more destructive results, says Nayyar. Organizations tasked with operating and protecting critical public infrastructure must assume the worst and take more serious measures to protect their environments, she advises. Fortunately, there were backup systems in place in Oldsmar. What could have been a tragedy instead became a cautionary tale. Both physical security and cybersecurity professionals should pay attention.

Expert Roundup: Healthy Buildings, Blockchain, AI, Skilled Workers, And More
Expert Roundup: Healthy Buildings, Blockchain, AI, Skilled Workers, And More

Our Expert Panel Roundtable is an opinionated group. However, for a variety of reasons, we are sometimes guilty of not publishing their musings in a timely manner. At the end of 2020, we came across several interesting comments among those that were previously unpublished. Following is a catch-all collection of those responses, addressing some of the most current and important issues in the security marketplace in 2021.

Smart Offices: How Is Mobile ID Changing The Way We Access The Office?
Smart Offices: How Is Mobile ID Changing The Way We Access The Office?

If you’re a security or facilities manager, you may already be aware of the quiet revolution that’s taking place across businesses and organizations up and down the country. By the end of 2020, 20% of all ID and access control systems featured mobile capability, and this is set to increase by a further 34% over the next three years. There’s no doubt that using a smartphone or mobile device in place of traditional credential and access control is a growing trend that’s only been sped up by the pandemic. It’s true that many businesses are still very much focused on remote working, although many are now starting to implement new-and-improved strategies that are better suited to protect the workforce moving forward. Mobile ID systems As the next normal becomes clearer, businesses will be reviewing procedures such as access control, occupancy monitoring, reducing touch points, and tracking visitors. Mobile ID systems are ideally suited to this task. But what are the key reasons for considering such a setup in 2021? But why is this new technology so well-suited to future-proof your physical access system, and why is it becoming so popular? Eradicating outdated legacy credentials Have you seen just how vulnerable outdated Proximity card technology can be? Low-frequency 125kHz cards can be cloned in a matter of seconds with the use of cheap, readily available tools. Despite their weaknesses, they are still used by a huge majority of businesses – big and small. All smartphones include two industry-standard features that make them perfect for operating a secure, contactless credential Replacing such a system with a mobile-enabled system is one of the best ways to increase security ten-fold. Thanks to a cloud-based infrastructure, mobile ID offers best-in-class security and cryptography. All smartphones include two industry-standard features that make them perfect for operating a secure, contactless credential. Bluetooth Smart and NFC (Near Field Communication) make them the best product to operate such a credential via a secure app. If you’re looking for best-in-class security in 2021, mobile access is most definitely the way forward. Removing touch points across the business Reducing touch points and the adoption of touchless facilities has become a key priority for businesses in the wake of COVID-19. Even as businesses start to return to the office and operate a home/office split, it will be imperative that unnecessary contact is kept to an absolute minimum between staff. The traditional issuance of identification and access control credentials can pose problems in this regard. Facility and security managers who are responsible for onboarding and processing ID have done the process face to face. Mobile access makes it possible to carry this process out without people coming into direct content. First, the security manager has access to a secure portal, allowing them to create, manage and edit credentials anywhere. They can upload and remotely transfer mobile ID and access control credentials directly to users’ smartphones over the air. Via the secure app, users can view and see their credentials and immediately begin using it for ID and access control by simply placing their smartphone over card readers. Enabling a more flexible way of working The way in which we work has changed for good. Even as people more people return to the office in 2021, a majority of businesses will be operating a home/office split indefinitely. This once again reinforces the need for a smarter, more adaptable onboarding system. Implementing mobile ID is the perfect way of doing this: over-the-air delivery of credentials and security data is now a given, helping businesses create the perfect balance between the home and the office. No longer do people have to come into the office for the onboarding process. Increasing convenience and user experience More often businesses are realising the value mobile ID can have for enhancing the work experience as well as security Ok, so mobile ID is the perfect way of increasing security and adapting workplaces to a post-COVID way of working. And we’ve not even touched on the most obvious advantage yet: Convenience. How many times have you forgotten your ID card? We’re sure it’s more times than you forget your smartphone. These powerful processors have become intertwined with the way we carry out tasks on a daily basis. They’re so vital that people will soon notice if they’ve forgotten it. From an employee’s perspective, mobile ID and access control is simple, convenient, and extremely user-friendly. More and more businesses are realizing the value mobile ID can have for enhancing the work experience as well as security. From the employer’s perspective, mobile ID means it’s easier for administrators to manage access and credentials. Future-proofing access control now will ensure that in the longer term, mobile ID is well worth the investment. The annual expenditure of printing ID cards and purchasing credentials can be vast, while reissuance costs can also quickly add up for larger organizations. These issues are a thing of the past for businesses using mobile ID. Mobile ID perfect tool for 2021 and beyond Until mobile ID, new and improved credentials’ main focus was on increasing security. Mobile ID not only delivers that, but it also provides a more convenient way of accessing the office in a way that’s perfectly suited to returning to the office in 2021. If there was ever a time to upgrade, now is the time. Summing up, mobile access is changing the way we access the office by: Eliminating weak links in security systems such as outdated legacy card technologies Eradicating the need for touch points across multiple areas of the workplace Enabling a smarter, more flexible approach to onboarding Increasing convenience – for both employers and employees.