Access control readers - Expert commentary

Entrance Control Vs Access Control: Similarities And Differences
Entrance Control Vs Access Control: Similarities And Differences

Entrance control and access control - of the physical kind - are common terms in the security industry which are often used interchangeably, but should they be? Having worked both sides of the fence, with previous roles at TDSi and HID and now the Major Accounts and Marketing Manager at Integrated Design Limited, Tony Smith highlights the subtle but important differences between these two terms and the systems they refer to, outlining how they should work together to achieve optimal security. Access control is a system which provides discriminating authentication Access control provides a discriminating authentication process and comprises the software or hardware that defines the criteria for acceptance or denial Used to describe a system which performs identification of users and authentication of their credentials (deciding whether or not the bearer of those credentials is permitted admission) access control is an incredibly broad term. Access control provides a discriminating authentication process and comprises the software or hardware that defines the criteria for acceptance or denial of an individual to a restricted area. Entrance control – such as security turnstiles - takes the output of that validation and has the capability to see whether that criteria is being adhered to, either granting or denying access as appropriate. Entrance control is the hardware responsible for keeping people honest If access control verifies authorized personnel using their credentials – their face, fingerprints, PIN number, fob, key card etc – and decides whether or not they are permitted access, entrance control is the hardware which enforces that decision by making users present their credentials in the correct way, either opening to allow pedestrian access or remaining closed to bar entry and potentially raising an alarm. For example, a card reader acts as an access control device, recognizing the card holder as having the correct permissions and saying ‘yes, this person can pass’. But, it’s the entrance control system – a turnstile, for example – which actually physically allows or denies access. Physical access and video surveillance Some entrance control systems don’t feature a physical barrier, however. Fastlane Optical turnstiles will not physically stop an unauthorized person from passing through, and instead alarm when someone fails to present valid credentials, alerting security staff that a breach has occurred. These kinds of turnstiles are suited to environments which just need to delineate between the public and secure side of an entrance, with less need to physically prevent unauthorized users from entering. State of the art access control integrations have been installed for award-winning complex, The Bower It’s also possible to capture video footage of any incidents, allowing security personnel to identify users failing to abide by the access control system’s rules, using It’s also possible to capture video footage of incidents, allowing security personnel to identify users failing to abide by access control system rules the footage to decide on the level of response required. The breach could have been the result of a member of staff being in a hurry and failing to show their card before passing through, in which case they can be reminded about the security protocol. Or, it could be an unidentified person who needs to be escorted from the premises. Entrance control and access control working together For optimum security, access control and entrance control should work together, with the entrance control system enhancing the use of the access control system, making it more efficient and better value for money. The two can’t effectively operate without each other. Security turnstiles, for example, require something to tell them that someone is about to enter – the access control system does this – and, the access control system needs a method of stopping people when they don’t badge in correctly. The two systems are complementary.

Making The Shift From Manufacturer To Service Provider
Making The Shift From Manufacturer To Service Provider

The jury is in: traditional security is out — and it’s being replaced with service-based solutions. The bottom line is: if you’re not embracing it, you’ll soon be left behind. XaaS — the collective term referring to the delivery of anything as a service — includes all services made possible through the use of the cloud. Security-as-a-Service (SaaS), which encompasses any type of system from access control to video surveillance, has paved the way for users to gain significant functionality and scalability not previously experienced with more traditional methods. Complicated IT functions SaaS allows manufacturers to provide numerous benefits to their customers As such, there is a marked transition for manufacturers from simply designing and building products to providing a service rooted in a partner- and customer-centric focus. This change hasn’t come easily. Some are still holding out and waiting for the “fad” to pass. However, the potential advantages for all parties involved far outweigh the perceived negative points. First and foremost, SaaS allows manufacturers to provide numerous benefits to their customers. An “as-a-service” model shifts the burden of data maintenance and infrastructure spending to an integrator/dealer partner or service provider. This relieves the end user of the expertise necessary to implement complicated IT functions to keep networked and on-premise solutions up-to-date. Traditional security systems Additionally, end users demand solid customer service. For some end users, traditional security systems are so similar in features and functionality that the key differentiator is the ability of the integrator or manufacturer to provide exceptional customer service and training. This is made possible through the service-based model, where customers appreciate a strong relationship with their integrator or manufacturer that provides them with additional knowledge and assistance when necessary. The cloud has proven to be  highly functional, flexible, and convenient for organizations Everyone also wants convenience. In the consumer market, we invest in things like meals that are pre-measured, prepped, and ready to be cooked, or companies that auto-ship dog food to our door each month. This ease-of-use translates over to the B2B market, where time is money and systems that save valuable resources are highly regarded. The Role of the Cloud The cloud has proven to be a highly functional, flexible, and convenient method for organizations to leverage as part of their strategies to protect and modernize their facilities. And the service-based nature lends itself well; forward-thinking integrators and dealers can diversify their product arsenal while still capitalizing on a recurring monthly revenue model (RMR). But then why has there been so much resistance to this change? Over the last 10 to 15 years, the cloud has gotten a bad rap for a myriad of reasons, including usability, management, and unreliability. However, that view of the cloud is changing for the positive as the technology becomes more advanced and innovators learn more about what it means to design a product or service with security at its core. "As-a-service” platform For example, one of the biggest misconceptions that plagues the cloud is the idea that it is not secure. However, the security of public cloud service providers is integral to their success because their business depends on it. Developing an ongoing and trustworthy relationship with customers can only be made possible through the assurance that their services are safe and the customer’s data is protected. As such, they’ve embraced the service-based model that is, at its core, the future of the business world as we know it. There isn’t a person, manufacturer, or integrator partner out there today who isn’t somehow touched or influenced by an “as-a-service” platform. And it’s about time the service-based model that leverages the public cloud reaches the masses.

A Secured Entrance Is The First Defense Against An Active Shooter
A Secured Entrance Is The First Defense Against An Active Shooter

The statistics are staggering. The death tolls are rising. And those who now fear environments that were once thought to be safe zones like school campuses, factories, commercial businesses and government facilities, find themselves having to add the routine of active-shooter drills into their traditional fire drill protocols. The latest active shooter statistics released by the FBI earlier this year in their annual active-shooter report designated 27 events as active shooter incidents in 2018. The report reveals that 16 of the 27 incidents occurred in areas of commerce, seven incidents occurred in business environments, and five incidents occurred in education environments. Deadly active-shooter events Six of the 12 deadliest shootings in the country have taken place in the past five years Six of the 12 deadliest shootings in the country have taken place in the past five years, including Sutherland Springs church, Marjory Stoneman Douglas High School, the San Bernardino regional center, the Walmart in El Paso and the Tree of Life Synagogue in Pittsburgh, which have all occurred since 2015. Although these incidents occurred in facilities with designated entry points common to churches, schools and businesses, the two most deadly active-shooter events since 2015 were the Route 91 Harvest music festival shooting in Las Vegas that left 58 dead and the Pulse nightclub killings in Orlando where 49 perished. As Christopher Combs, special agent in charge of the FBI field office in San Antonio, Texas, said during a news conference following the August 31 mass shooting in Odessa, Texas that claimed seven lives: “We are now at almost every two weeks seeing an active shooter in this country." Active shooter incidents Between December 2000 and December 2018, the FBI’s distribution of active shooter incidents by location looks like this: Businesses Open to Pedestrian Traffic (74) Businesses Closed to Pedestrian Traffic (43) K-12 Schools (39) Institutions of Higher Learning (16) Non-Military Government Properties (28) Military Properties—Restricted (5) Healthcare Facilities (11) Houses of Worship (10) Private Properties (12) Malls (6) What the majority of these venues have in common is they all have a front entrance or chokepoint for anyone entering the facilities, which is why any active-shooter plan must include a strategy to secure that entry point. Situational awareness in perimeter and door security Preventing people with the wrong intentions from entering the space is the goal" According to Paul Franco, an A&E with more than 28 years of experience as a consultant and systems integrator focusing on schools, healthcare and large public and private facilities, that while active shooter incidents continue to rise, the residual effect has been an increase in situational awareness in perimeter and door security. “Certainly, protecting people and assets is the number one goal of all our clients. There are multiple considerations in facilities like K-12 and Healthcare. Preventing people with the wrong intentions from entering the space is the goal. But a critical consideration to emphasize to your client is getting that person out of your facility and not creating a more dangerous situation by locking the person in your facility,” says Franco. High-security turnstiles “Schools today are creating a space for vetting visitors prior to allowing access into the main facility. Using technology properly like high-security turnstiles offer great benefits in existing schools where space constraints and renovation costs can be impractical.” What steps should they be taken when recommending the proper door security to ensure the building is safe As a consultant/integrator, when discussions are had with a client that has a facility in a public space like a corporate building, government center or industrial facility, what steps should they be taken when recommending the proper door security to ensure the building is safe and can protect its people and assets? For Frank Pisciotta, President and CEO of Business Protection Specialists, Inc. in Raleigh, North Carolina, a fundamental element of his security strategy is making appropriate recommendations that are broad-based and proactive. Properly identifying the adversaries “As a consultant, my recommendations must include properly identifying the adversaries who may show up at a client’s door, the likelihood of that event occurring, the consequences of that event occurring, determining if there are tripwires that can be set so an organization can move their line of defense away from the door, educating employees to report potential threats and creating real-time actionable plans to respond to threats. A more reactionary posture might include such thing as target hardening such as ballistic resistant materials at entry access points to a facility,” Pisciotta says. Veteran consultant David Aggleton of Aggleton & Associates of Mission Viejo, California recommends that clients compartmentalize their higher security areas for limited access by adding multiple credential controls (card + keypad + biometric), along with ‘positive’ access systems that inhibit tailgating/piggybacking such as secure turnstiles, revolving door and mantrap if your entrances and security needs meet the required space and access throughput rates. Integrated solution of electronic access control Defining a single point of entry in some public facilities is becoming the new standard of care according to many A&Es and security consultants, especially in a school environment. This approach allows a concerted effort when it comes to staffing, visitor monitoring and an integrated technology solution. The bottom line remains: most buildings are vulnerable to a security breach A proactive stance to securing a door entryway will use an integrated solution of electronic access control, turnstiles, revolving doors and mantraps that can substantially improve a facility’s security profile. The bottom line remains: most buildings are vulnerable to a security breach, so it’s not a matter of if there will be a next active shooter tragedy, it’s only a matter of where. Enhancing access control assurance “There is no easy answer to this question,” says Pisciotta referring to how a secured entrance can deter an active shooter. “There have been at least two high-profile incidents of adversaries shooting their way into a facility through access control barriers. So, if the threat so dictates, a ballistic resistant might be required.” He concludes: “There is obviously no question that turnstiles, revolving doors and man traps enhance access control assurance. Electronic access control is easy to integrate with these devices and providing that credentials are secure, approval processes are in place, change management is properly managed and the appropriate auditing measures in place, access control objectives can be met.”

Latest ISONAS, Inc. news

Cybersecurity: Why It Matters Now And Forever
Cybersecurity: Why It Matters Now And Forever

Cybersecurity has become a major element – and a major source of discussion – in the physical security marketplace as a result of the rise in networked systems. And we may still not be talking enough about cybersecurity. Here is part one of our Cybersecurity series. “Cybersecurity requires everyone in the security industry to be playing offense and defense at the same time, every single day,” says Bill Bozeman, President and CEO of PSA Security Network. “It needs to just become part of the standard conversation when we are talking about physical security because they are so intertwined.” Creating New Industry Leaders Cybersecurity and physical security can be seen as two parts of a single entity, and increasingly the two will be combined at the enterprise level over the next several years. “This convergence of physical security and cybersecurity will create new industry leaders that will emerge to lead a new segment of the combined market through strong investment and leadership,” says Rob Lydic of ISONAS, now part of Allegion. Data capture form to appear here! Cybersecurity issues dominate almost every discussion in today’s physical security industry, and the clear message is that “manufacturers and integrators must continue to create robust and scalable cybersecurity offerings to protect customer data and facilities,” says Lydic. He contends that cloud services providers (such as ISONAS) are more cybersecure and reliable ‘by orders of magnitude’ than non-cloud solutions. Cybersecurity is linked to cloud-based systems and managed security service provider models Cloud-Based Services The Security Industry Association (SIA) has listed cybersecurity as one of 2019’s ‘Top Megatrends’ in the physical security market. SIA says it is important to prioritize cybersecurity among security businesses, for customers’ businesses, and for vendors. The trend calls for continual process improvement and investment. Bill Bozeman of PSA Security Network agrees: “Cybersecurity has definitely taken a strong foothold in the industry.” With the continued expansion of cloud-based services, cybersecurity will be more important than ever to integrators, manufacturers and end users alike, he says. Notably, cybersecurity is directly linked to two other important industry trends listed by Bozeman: cloud-based systems and the rise in recurring monthly revenue (RMR) and managed security service provider (MSSP) models, whose focus will include cybersecurity. Loss Prevention Executives The days when cybersecurity was exclusively the domain of the information technology (IT) department are gone. “Cybercrime is one of the biggest threats organizations of all sizes and types face today,” says Michael Malone, CEO of ADT Cybersecurity (formerly known as Datashield). “Considering the magnitude of these crimes, it now falls on the entire organization, including the traditional security or loss prevention executives, to band together to combat these threats.” Cybercrime is one of the biggest threats organizations of all sizes and types face today Malone favors (and his company offers) a managed detection and response (MDR) service, which combines advanced technology and human analysis. Using packet capture on the network, an MDR analyst can ‘replay’ a cyber security event and dig deeper into the incident and determine remediation steps. It’s an approach that significantly cuts through false positive ‘noise’ so security teams can focus on what matters. Helping Security Officers Interestingly, cybersecurity is poised to benefit from another major trend in the physical security market – the rise of artificial intelligence. Specifically, machine learning applications for cybersecurity include: detecting malicious activity, helping security officers determine what tasks they need to complete in an investigation process, analyzing mobile endpoints, decreasing the number of false positive threats, automating repetitive tasks like interrupting ransomware, and potentially closing some zero-day vulnerabilities. But AI in this case is not a panacea. Christopher McDaniels of Mosaic451 recommends pairing human intellect with machine technology to sort through data faster and catch hackers before they do much damage. See part two of our Cybersecurity series here.

ISC West 2019: ISONAS To Exhibit IP-Based Access Control Solutions At ISC West 2019
ISC West 2019: ISONAS To Exhibit IP-Based Access Control Solutions At ISC West 2019

Booth number: 20043 ISONAS, now part of the Allegion family of brands, is an IoT solution for physical access control with a purely IP-based reader-controller driven from a fully featured access control software hosted in the cloud. ISONAS has been revolutionizing access control with this simple solution and is a leading manufacturer of Pure IP Access Control hardware. The open architecture hardware can be paired with their cloud-hosted software or with any full-featured access control solution; providing a complete access control platform. An ISONAS system provides an ideal product solution for securing facilities while reducing costs and providing all of the advantages that Pure IP technology brings to the door. We use ISC West to establish thought leadership opportunities in the market and drive the appropriate groups to our booth Q: What was The First Year Your Company Exhibited At ISC West? Please Share Your Remembrances Of That Experience? The first full year we exhibited at ISC West was in 2015. We had a smaller booth in relation to the show, but one of the most memorable moments was the energy of the tradeshow floor and in our booth – almost like being on the floor of the stock exchange. The constant flow of people through our booth was a fulfilling experience - the number of folks that patiently waited to hear the ISONAS story and learn why our products could provide differentiation for them in the market was validation of our hard work. Q: What Strategies Do You Use To Get The Most Out Of Exhibiting At ISC West? We have a strategic formula for pre-show, during show and post show communications and messaging. ISC West has traditionally been one of the largest marketing spends annually and our objective was to drive significant traffic and see as many people as possible. To do this we task our teams with setting meetings with customers ahead of time. In addition, we use ISC West to establish thought leadership opportunities in the market and drive the appropriate groups to our booth to help proliferate our message. Q: How Do You Quantify Your Success At ISC West? What ROI Do You Receive From The Show? We quantify success by the number of leads, along with the quality of those leads and how many turn into viable opportunities. We also measure success based on the amount of thought leadership coverage we obtain, and relationships we build. The face-to-face conversations with partners and customers is also invaluable and tough to gauge from the ROI perspective, but it is an important part to building real relationships and trust with customers. Q: What Company Activities (Outside The Show Floor) Does Your Company Organize Each Year? ISC West is where the who’s who of the security industry debut new products and partnerships Traditionally we have held our annual sales meeting prior to ISC West to bring our teams together for some face time as well as educate them on new products, messaging and talking points for the trade show.    Q: What Sets ISC West Apart From Other Trade Shows On The Calendar? ISC West is where the who’s who of the security industry debut new products and partnerships. The educational workshops, industry events and ability to connect with the majority of your network for three days in one place is incredibly valuable. Customers from all verticals and sizes see value in the ISC West show, and this drives high attendance rates and a greater opportunity to interact with new and existing customers.

Top Ten Security Industry Mergers And Acquisitions Of 2018
Top Ten Security Industry Mergers And Acquisitions Of 2018

Consolidation persisted in the physical security industry in 2018, and big companies such as Motorola, Canon and UTC continued to make moves. Also among the mergers and acquisitions (M&A) news in 2018 was a high-profile bankruptcy (that ended well), continuing consolidation in the integrator market, and the creation of a new entity called “LenelS2.” Here’s a look at the Top 10 M&A stories in 2018: 1. Motorola Acquires Avigilon Motorola Solutions announced in February that it had entered into a definitive agreement to acquire video surveillance provider Avigilon in an all-cash transaction that enhances Motorola Solutions’ portfolio of mission-critical communications technologies. Avigilon products are used by a range of commercial and government customers including critical infrastructure, airports, government facilities, public venues, healthcare centers and retail. The company holds more than 750 U.S. and international patents. 2. UTC Climate, Control & Security Buys S2 Security UTC Climate, Controls & Security agreed in September to acquire S2 Security, a developer of unified security and video management solutions. UTC subsequently combined S2 with its Lenel brand to create LenelS2, “a global leader in advanced access control systems and services” with “complementary strengths.” 3. Costar Technologies Acquires Arecont Vision After Bankruptcy Arecont Vision, the provider of IP-based megapixel camera and video surveillance solutions, announced in July that the acquisition by Costar Technologies, Inc. of its assets had been approved by the bankruptcy court. After the closing of the sale, the company began operating as Arecont Vision Costar, LLC and is part of Costar, a U.S. corporation that designs, develops, manufactures, and distributes a range of products for the video surveillance and machine vision markets. 4. Allegion Acquires Access Control Company ISONAS Allegion plc, a security products and solutions provider, agreed in June to acquire ISONAS through one of its subsidiaries. ISONAS’ edge-computing technology provides access control solutions for non-residential markets. ISONAS' devices – like its integrated reader-controllers – utilize power over ethernet, making them easy to install and cost effective as they utilize existing customer infrastructures. The company is based in Boulder, Colo. 5. HID Buys Crossmatch for Biometrics HID Global announced that it had acquired Crossmatch, a provider of biometric identity management and secure authentication solutions, from Francisco Partners. Crossmatch’s portfolio of products includes biometric identity management hardware and software that complement HID’s broad portfolio of trusted identity products and services. 6. BriefCam Announces Acquisition by Canon BriefCam, a global provider of video synopsis and deep learning solutions, announced its acquisition in May by Canon Inc., a global digital imaging solutions company. The addition of BriefCam to Canon’s network video solutions products portfolio complements the Canon Group’s previous acquisitions of Axis Communications and Milestone Systems. 7. Allied Universal Acquires U.S. Security Associates Allied Universal, a security and facility services company, finalized its acquisition of U.S. Security Associates (USSA) in October, further building on its position in the security services industry. This acquisition includes Andrews International (including its Government Services Division and Consulting and Investigations and International Division) and Staff Pro. 8. Johnson Controls Acquires Smartvue Corp. Johnson Controls announced in April that it had acquired Smartvue, a global IoT and video provider that empowers cloud video surveillance and IoT video services. The addition of the Smartvue cloud-based video platform will enhance Johnson Controls’ offering of an end-to-end, smart cloud-based solution that can provide superior business data and intelligence to customers and added value to partners. 9. ADT Acquires Red Hawk Fire & Security (and Others) ADT Inc.’s acquisition of Red Hawk Fire & Security, Boca Raton, Fla., was the latest move in ADT Commercial’s strategy to buy up security integrator firms around the country and grow their footprint. In addition to the Red Hawk acquisition, announced in mid-October, ADT has acquired more than a half-dozen security system integration firms in the last year or so. 10. Convergint Technologies Continues to Acquire Convergint Technologies announced in August the acquisition of New Jersey-based Access Control Technologies (ACT), bringing further electronic security systems experience to Convergint's service capabilities. Convergint has strategically grown its service footprint across the United States, Canada, Europe and Asia Pacific through strong organic growth and the completion of 18 acquisitions since early 2016. And it continues: Convergint announced acquisition of SI Technologies, Albany, N.Y., in November and Firstline Security Integration (FSI), Anaheim, Calif., in December. (And Convergint itself was acquired in February by private equity group Ares Management.)