Veracity Video Signal Devices and Distribution Amplifiers

In the state of the residential security market today, we see many who are offering home security packages that rely on numerous sensors and multiple devices to provide a comprehensive coverage of the home and provide peace of mind. Each individual sensor or device within the package provides a specific functionality, and the user finds himself burdened by an overwhelming amount of sensors and devices. This overload is intensified by the penetration of additional IoT and smart devices into the home, such as pet-cams or smart speakers that add to the burden of installation and maintenance. In addition, we are witnessing the rise in popularity of DIY security devices, indicating that users are looking for models and technologies that provide both contract flexibility and simplicity of use. The past years have seen major advancements in radar technology, which have brought the formerly military technology into the consumer space. Radars provide interesting prospects for home security and smart homes due to several inherent characteristics which give it an advantage over existing technologies. The resolution of an advanced radar sensor enables not only presence detection, but also provides advanced features for security, automation and well-being Advanced Security And Automation Features Of primary importance, a consumer designed radar sensor provides the user with full privacy, but the use of radar is also beneficial because it is indifferent to environmental, temperature and lighting conditions. In addition, radar signals (at certain frequencies) are capable of penetrating through almost any type of material, enabling concealed installation, robust monitoring in cluttered spaces and even the coverage of several separate rooms with only one device. In terms of capabilities, simple time of flight 2-antenna radar sensors, which have been around for a while, do not provide much additional value in comparison to existing solutions and are not necessarily competitive in terms of pricing. However, the new generation of radar sensors are also opening up new capabilities previously achieved with optics only. Today, the resolution of an advanced radar sensor is high enough to enable not only presence detection, but also to provide advanced features for security, automation and well-being, all in one. Imagine for example, that the security sensor installed in your elderly parent’s home could also detect a fall having occurred, monitor the breathing of a baby or even leaks in your wall. Due to the unique field of view that radar provides as well as the multi-functional potential, this technology will be the key to the awaited convergence of smart home functionalities and minimization of home devices. The security sensor installed in your elderly parent’s home could also detect a fall having occurred Secret Of The Consumer Radar A radar sensor’s accuracy and its ability to support wide functionality and applications is determined initially by its resolution, which is based on two key factors: bandwidth and number of channels. The wider the bandwidth and the more channels the radar supports, the more accurate the data received. Imagine the difference between a 1990s television model and a 4K 2018 television model - As the resolution is ever improving, the sharper and more detailed is the image. When looking at the short-range radar sensor market, prominent companies such as Texas Instruments and NXP are offering radar-on-chip solutions supporting 2\3 transmitters (Tx) and 3\4 receivers (Rx), mainly utilizing frequency bands of 77-81GHz, as they target mostly automotive and autonomous driving applications. Another company that develops such radar-on-chip solution is Vayyar Imaging, an Israeli start-up, founded in 2011, that developed a radar sensor for 3D imaging. Vayyar Imaging directly targets the smart home and security markets with its radar-on-chip, developing modules and products for intruder detection, automation and elderly care (fall detection). Providing not only chips, but complete systems, the new model makes radar technology highly available and accessible. The radar-on-chip technology opens the door to installation of security and well-being devices in locations where privacy or environmental conditions pose an issue Radar-On-Chip Solution The radar-on-chip solution supports 72 full transceivers, an integrated DSP and radar bands between 3-81GHz. The resolution provided by this type of specification is high enough to provide subtle information about people’s real time location posture (lying down\falling\sitting\walking), and breathing, and enables to classify pets from humans, but it is low enough as to not compromise privacy. This type of technology opens the door to installation of security and well-being devices in locations where privacy or environmental conditions pose an issue, such as in bathrooms or heavily lit environments. Moreover, utilization of this technology allows to dramatically minimise the numbers of sensors installed in the home, as it provides full home coverage with just one or two sensors and enables using the same HW to support additional capabilities such as breath monitoring, fall detection and highly accurate automation. Using AI and machine learning, the data derived by these sensors can be leveraged to provide smarter, verified alerts on the one hand and whole new insights on the on the other. The sensor can be tuned to learn the location of the house entrances or boundaries, where the inhabitants are expected to be at night, or where they should be expected to enter from into the home, adding new logics to the traditional yes\no decision making. Home security is widely regarded as a necessity, provides peace of mind to people and is integral to people's day to day lives Additional Smart Home Services Among the evolving home technology verticals, security is by far the most relevant and integral to people’s day to day lives. Home security is widely regarded as a necessity and provides peace of mind to people. Being a legacy industry with many well-known and well-trusted brands, security players are well positioned to introduce new technology into the home and have the ability and credibility to expand their offerings to additional smart home services by utilizing existing infrastructure and channels. With technology giants entering the security arena through the smart home door the DIY security solution market expected to explode with a CAGR of 22.4% (according to a report by Persistence Market Research). Now that new pricing and service models offer minimal commitment, traditional security players will need to step up. Security companies will need to explore new technologies and expand their offering if they intend to stay relevant and competitive in a market trending on functionality converge and minimization of maintenance and installation costs.

Everybody has been hooked on the discussions about Analog HD or IP systems, but shouldn’t we really be thinking about WiFi and 5G connectivity, removing the need for expensive cabling? Are wireless networks secure enough? What is the potential range? Even the basic question about whether or not the network is capable of transferring the huge (and growing) amount of data required for High Res Video, which will soon be quadrupled with the advent of 4K and higher resolutions. The Future Of Video Surveillance Monitors We have seen a massive uptake in 4K monitors in the security industry. While they have been relatively common in the consumer market, they are only now beginning to really take off in the CCTV market, and the advances in Analog HD and IP technology mean that 4K is no longer the limited application technology it was just a few years ago. Relatively easy and inexpensive access to huge amounts of storage space, either on physical storage servers or in the cloud, both of which have their own positives and negatives, have really helped with the adoption of 4K. Having said that the consensus seems to be, at least where displays are concerned, there is very little need for any higher resolution. So, where next for monitors in CCTV? 8K monitors are present, but are currently prohibitively expensive, and content is in short supply (although the Japanese want to broadcast the Tokyo Olympics in 8K in 2020). Do we really need 8K and higher displays in the security industry? In my own opinion, not for anything smaller than 100-150+ inches, as the pictures displayed on a 4K resolution monitor are photo realistic without pixilation on anything I’ve seen in that range of sizes. The consensus seems to be, at least where displays are concerned, there is very little need for any higher resolution Yes, users many want ultra-high resolution video recording in order to capture every minute detail, but I feel there is absolutely no practical application for anything more than 4K displays below around 120”, just as I feel there is no practical application for 4K resolution below 24”. The higher resolution camera images can be zoomed in and viewed perfectly well on FHD and 4K monitors. That means there has to be development in other areas. Developments In WiFi And 5G What we have started to see entering the market are Analog HD and IP RJ45 native input monitors. While you would be forgiven for thinking they are very similar, there are in fact some huge differences. The IP monitors are essentially like All-In-One Android based computers, capable of running various versions of popular VMS software and some with the option to save to onboard memory or external drives and memory cards. These are becoming very popular with new smaller (8-16 camera) IP installs as they basically remove the need for an NVR or dedicated storage server. Developments in the area of WiFi and 5G connectivity are showing great promise of being capable of transferring the amount of data generated meaning the next step in this market would maybe be to incorporate wireless connectivity in the IP monitor and camera setup. This brings its own issues with data security and network reliability, but for small retail or commercial systems where the data isn’t sensitive it represents a very viable option, doing away with both expensive installation of cabling and the need for an NVR. Larger systems would in all likelihood be unable to cope with the sheer amount of data required to be transmitted over the network, and the limited range of current wireless technologies would be incompatible with the scale of such installs, so hard wiring will still be the best option for these for the foreseeable future. There will be a decline in the physical display market as more development goes into Augmented and Virtual Reality Analog HD Options Analog HD options have come a long way in a quite short time, with the latest developments able to support over 4MP (2K resolution), and 4K almost here. This has meant that for older legacy installations the systems can be upgraded with newer AHD/TVI/CVI cameras and monitors while using existing cabling. The main benefit of the monitors with native AHD/TVI/CVI loopthrough connections is their ability to work as a spot monitor a long distance from the DVR/NVR. While co-axial systems seem to be gradually reducing in number there will still be older systems in place that want to take advantage of the benefits of co-axial technology, including network security and transmission range. Analog technologies will eventually become obsolete, but there is still much to recommend them for the next few years. Analogue technologies will eventually become obsolete, but there is still much to recommend them for the next few years Another more niche development is the D2IP monitor, which instead of having IP input has HDMI input and IP output, sending all activity on the screen to the NVR. This is mainly a defense against corporate espionage, fraud and other sensitive actions. While this has limited application those who do need it find it a very useful technology, but it’s very unlikely to become mainstream in the near future. Augmented Reality And Virtual Reality Does the monitor industry as a whole have a future? In the longer term (decades rather than years) there will definitely be a decline in the physical display market as more and more development goes into AR (Augmented Reality or Mixed Reality depending on who’s definition you want to take) and VR (Virtual Reality). Currently AR is limited to devices such as smartphones (think Pokémon Go) and eyewear, such as the ill-fated Google Glass, but in the future, I think we’ll all have optical implants (who doesn’t want to be The Terminator or RoboCop?), allowing us to see whatever we decide we want to as an overlay on the world around us, like a high-tech HUD (Heads Up Display). VR on the other hand is fully immersive, and for playback or monitoring of camera feeds would provide a great solution, but lacks the ability to be truly useful in the outside world the way that AR could be. Something not directly related to the monitor industry, but which has a huge effect on the entire security industry is also the one thing I feel a lot of us have been oblivious to is the introduction of quantum computers, which we really need to get our heads around in the medium to long term. Most current encryption technology will be rendered useless overnight when quantum computers become more widespread. So, where does that leave us? Who will be the most vulnerable? What can we do now to mitigate the potential upheaval? All I can say for sure is that smarter people than me need to be working on that, alongside the development of the quantum computer itself. Newer methods of encryption are going to be needed to deal with the massive jump in processing power that comes with quantum. I’m not saying it will happen this year, but it is definitely on the way and something to be planned for.

The advent of IP security cameras has resulted in the need to maintain existing coax cable for networking applications Transmission of video and PoE power for IP security cameras over infrastructures can be confusing. Network infrastructures are designed using twisted pair cabling that we refer to as CAT (short for Category) cable, also referred to as UTP (Unshielded Twisted Pair). Security systems, coming from an analog environment, have historically transmitted over coax cable, and with the use adaptors can transmit over CAT cabling, which can be further broken down into single pair twist and untwisted applications. Cabling shares one, often misunderstood commonality. Any physical medium has a form of resistance to any element carried on that cable. With regard to network transmission over CAT 5 and greater (5e, 6, 7), there is a distance limitation of 328 feet or 100 meters. The applicable standards state that the bandwidth applied at one end of the cable at 10/100/1000 (1G)Mbps will be realized at the other end. This is also where we find the first limitation. At this same 328-foot distance there is a loss of PoE power. 802.3af or 15.4 watts is a value realized only at the PoE source. Under the standard, after traveling through 328 feet, the power at the camera is 12.95 watts. The same is true for 802.3at which has a source power of 30 watts and 328-foot distance power of 25 watts. The advent of IP security cameras has resulted in the need to maintain existing coax cable for networking applications. The first thing to realize is there are no standards for network transmission over coax. In reality the characteristics governing coax can be considered the opposite of CAT twisted pair cable. CAT cabling for network transmission consists of 4 wire pair, 2 of which are used for signal and PoE transmission. This ability to separate PoE and bandwidth transmitting over two pairs maximises power transmission. Coax cable, when used in the same application, is limited to a single pair – center conductor and shield. Its characteristics promote bandwidth but limit PoE transmission compared to UTP cable. I emphasize again, there are no standards for coax cable transmission. This process becomes more confusing when you realize there are various type of cables that are called either UTP or Coax. All of these cable have different characteristics that have a direct impact on their ability to transmit bandwidth and PoE. The standards for UTP transmission were set for CAT 5 (5e). Categories 6, 7 and above will tend to have lower cable resistance and longer transmission distance; CAT 3, higher resistance and shorter distance. Common types of coax cable have varying distance limitations The same applies to coax cable. Again there is no standard, the typical cable found in analog security applications is RG-59. In general, application distance limitations ran between 750 to 1000 feet, greater than the 328 network limitation. This is why extenders are required to convert from coax to UTP and to extend the signal and power range. As with UTP cable, there are two similarities. First, there are different grades of coax; second, there are different types. All these differences generally apply to cable resistance and therefore distance performance.  The most common types of coax cable are: RG 59, RG 6 and RG 11 Why is this important? In general there are two reasons. The first is in specifying equipment for a video security system, you are generally dealing with existing wiring and a fixed performance requirement. It is important to know the type and condition of the wiring in order to know what system performance requirements can be met. Second is a function of understanding specifications for the transmission equipment that will be used in the infrastructure. As noted, when maintaining coax, the use of coax-to-Ethernet convertors/extenders is required. In many cases even when UTP is used, distances over the 328-foot limit are required. A manufacturer’s product specification sheet can truthfully state their products can perform at 100 Mbps, they can handle 802.3at 30 watts and they can transmit distances up to 6,000 feet. However these must be viewed as separate performance claims. The key word is separate. Notice in these statements there is nothing that ties 100Mbps and/or 30 watts (these are examples only) and claimed distance of 6,000 feet together. Neither is the type of cable used indicated. By themselves, each individual claim is truthful; however, applications require they work together, and this is usually not the case. Many times it is difficult to read between the lines of manufacturer’s specifications. Failure to do so can cost additional time, money and even lead to removing the infrastructure itself. There is a simple answer. Call the manufacturer and have them confirm that their solution will perform as required for your specific application. If necessary, ask for proof that they have conducted testing to support their performance claims. Infrastructure is confusing, and you don’t need to be an expert, you just need to ask the right person(s) the right questions.

At ISC West this year, on booth 11099, Veracity will be demonstrating its expanded suite of COLDSTORE solutions, from the new COLDSTORE 2U delivering 112TB video storage in a compact rack-mounted space up to the COLDSTORE Colossus, the 4U, 45-bay, 630TB video storage solution. The COLDSTORE family offers unique benefits including a 10x increase in hard disk life and power savings of 90%+. In fact, Colossus, with 630TB and 45 disks, consumes less than 80W of power! This gives the COLDSTORE range not only enviable performance benefits but also a compelling total cost of ownership case not available with other video storage solutions, especially for longer retention periods. Eliminating Storage Systems’ Operational Issues COLDSTORE has patented technology designed specifically for sequential and continuous recording of video surveillance channelsCOLDSTORE is in use throughout the world at critical infrastructure sites, major sporting venues, in retail, in custodial and policing environments and in city center command and control operations. COLDSTORE has patented technology designed specifically for sequential and continuous recording of video surveillance channels. As a result, many of the operational issues with standard storage systems, such as long disk rebuild times, high power consumption, excess heat and reduced disk life, are eliminated. Also, on display at ISC West will be the COLDSTORE Pro 3U, 210TB unit that uses only 0.3W per Terabyte. Visitors will learn about COLDSTORE’s new embedded NVR functions and the ability to record from camera direct to COLDSTORE through ONVIF compatibility or using embedded COLDSTREAM code in open platform cameras, such as Axis and Hanwha. Over 100 channels can be supported, at 4Mbps per channel. Integrated Command And Control Solution Veracity will also be demonstrating VIEWSCAPE, the integrated and open command and control solution. VIEWSCAPE is a real success story in use in many city center, retail, critical infrastructure and other sites. Anyone with an interest in C3, critical command solutions should get to know VIEWSCAPE. With over 100 integrations, this comprehensive command and control system can be seen at Veracity’s booth 11099. The full integration of COLDSTORE with Hanwha Techwin’s Wisenet WAVE will be on show on both the Veracity and Hanwha Techwin booth The full integration of COLDSTORE with Hanwha Techwin’s Wisenet WAVE will be on show on both the Veracity and Hanwha Techwin booth. Wisenet WAVE is an IP Video management platform that allows users to create IP video surveillance solutions tailored to any type of project, usable by anyone and on any device. It is simple to setup and use, and when integrated with COLDSTORE delivers an impressive suite of features with all the benefits of COLDSTORE’s long-term video retention capabilities. LONGSPAN Ethernet Over Coax Solution Veracity is most famous for its transmission solutions. In 2005, Veracity launched the world’s first Ethernet over coax solution. As a market leader, the full range of multi-channel Ethernet over Coax, extreme distance Ethernet and other transmission products will be on show. This includes LONGSPAN, which delivers IP video and POE (Power over Ethernet) over a distance of 820m (2,690ft) on standard Ethernet cable. Veracity will also have its informative IP transmission workshop running at the booth. Veracity operates in the USA from its office in Dallas, Texas and continues to experience rapid growth fueled by the development of strong relationships with many customers and partners across the United States. Veracity experts will be available throughout ISC West at booth 11099 from the 10th to 12th April 2019 at the Sands Expo in Las Vegas. Make sure you visit us.

India’s foremost shop window and business hub for the security industry, Secutech India, is set to return from 25 – 27 April 2019 against a backdrop of rising government investment in smart city projects. Jointly organized by Asian Business Exhibition and Conferences Ltd (ABEC) and Messe Frankfurt Trade Fairs India Pvt. Ltd, the 2019 edition of the fair will introduce a new smart home zone to accommodate India’s growing home automation sector.    Indian Security IndustryOn top of the commercial security and fire safety sectors, home security solutions are also on the rise" The show is set to kick off within the context of a positive outlook for the Indian security industry. Just one of many causes for optimism is the government’s commitment to smart city projects, which include investments totaling USD 7.3 billion in 100 cities across the country. These investments are bolstering the already promising surveillance and access control markets, which are forecast to grow at an impressive CAGR of approximately 10% and 15% until 2021.  “Thanks to positive market conditions and Secutech India’s track record of generating new business within the security industry, over 100 exhibitors have signed up to exhibit at this 8th edition of the fair,” said Ms Regina Tsai, Deputy General Manager, Messe Frankfurt New Era Business Media Ltd. “On top of the commercial security and fire safety sectors, home security solutions are also on the rise. To meet the sourcing requirements of this growing sector, we are delighted to have added a new ‘smart home zone’ to this year’s show floor. Visitors to the zone will find the very latest home video surveillance systems, alarm systems, access control systems and integrated home networks.” Fire And Safety India In total, trade visitors will have 15,000 sqm of exhibition space to explore during the fair. While the new smart home zone will be of great interest to these visitors, the show’s commercial security suppliers are likely to remain the largest attraction for buyers. Assa Abloy, Avigilon, CP Plus, ESSl, Hikvision and Veracity, are just a few of the well-known brands that will be displaying their latest video surveillance, analytics, biometrics and access control technologies for the commercial security sector during the fair. The show will also welcome the return of the concurrent ‘Fire and Safety India’ event In addition, the show will also welcome the return of the concurrent ‘Fire and Safety India’ event. The event provides coverage to the entire spectrum of fire safety products, including the likes of fire detection and alarm systems, emergency lighting, escape ladders, evacuation equipment and fire protection gear. Strong channel buyer turnout With so many crossover sourcing opportunities on offer between the security, fire safety and smart home sectors, fair organizers are anticipating a strong turn out from channel buyers. At the previous edition, the fair attracted over 18,000 visitors, including builders, developers, system integrators, distributors, consultants and project owners. Thanks to its extensive series of forums and seminars, Secutech India serves as the perfect occasion for industry players to gather the latest market intelligence. This year, fair organisers have collaborated with knowledge partners PwC India and MitKat Advisory to design a program that will tackle the most important issues facing the regional security industry. India's Smart City Projects The panel discussions will focus on the future of India’s smart city projects One of many highlights is the ‘Smart Urban Infrastructure – Monitoring & Surveillance Framework’ panel discussion, which will take place on the first day of the fair. The panel discussions will focus on the future of India’s smart city projects, as well as cyber security, emergency preparedness, and emergency response mechanisms. In addition, the third day of the program will be dedicated solely to the fire and safety sector, with a series of seminars covering safety solutions for India’s densely populated urban areas. A hands-on training experience for fire safety practitioners and corporate professionals will also feature, in the shape of the ‘Fire Safety Volunteer Training’ program. Run by the State of Maharashtra Fire Services, the training will give participants information on different types of fire-fighting equipment and how to use them correctly during fire incidents. Attendees will also learn about fire safety legislation, fire drills, evacuation procedures, fire safety precautions, and the most common causes of fire. Consultant Consortium On top of the fringe events, a number of new business matching programs will be introduced to connect exhibitors with the most appropriate stakeholders. The ‘Consultant Consortium’, for example, is a business matching and networking forum dedicated to connecting exhibitors with mechanical engineering and plumbing consultants, contractors, HVAC consultants, as well as façade and architectural consultants.  

At Intersec this year, on stand SA-J31, Veracity will be demonstrating and launching COLDSTORE Colossus, the 4U, 45-bay, 630TB video storage solution. COLDSTORE Colossus is engineered to meet the long-term retention needs of the Middle East. The COLDSTORE family offers unique benefits including a 10x increase in hard disk life and power savings of 90%+. In fact Colossus, with 630TB and 45 disks, consumes less than 80W of power! This gives the COLDSTORE range not only enviable performance benefits but also a compelling total cost of ownership case not available with other video storage solutions. COLDSTORE is in use throughout the world at critical infrastructure sites, major sporting venues, in retail, in custodial and policing environments and in city centre command and control operations. High Power Consumption COLDSTORE has patented technology designed specifically for sequential and continuous recording of video surveillance channels COLDSTORE has patented technology designed specifically for sequential and continuous recording of video surveillance channels. As a result, many of the operational issues with standard storage systems, such as long disk rebuild times, high power consumption, excess heat and reduced disk life, are eliminated. Also on display will be the COLDSTORE Pro 3U, 210TB unit that uses only 0.4W per Terabyte. Visitors will also hear about COLDSTORE embedded NVR functions and the ability to record from camera direct to COLDSTORE through ONVIF compatibility or using embedded COLDSTREAM code in open platform cameras, such as Axis and Hanwha. Over 100 channels can be supported, at 4Mbps per second, on all but the smallest COLDSTORE units. Critical Command Solutions Also on display at Intersec is VIEWSCAPE, the integrated and open command and control solution. VIEWSCAPE is a real success story in use in many city centre, retail, critical infrastructure and other sites. Anyone with an interest in C3, critical command solutions should get to know VIEWSCAPE. With over 100 integrations, this comprehensive command and control system can be seen on Veracity’s stand at SA-J31. As a market leader, the full range of multi-channel Ethernet over Coax, extreme distance Ethernet and other transmission products will be on show Veracity, of course, is most famous for its transmission solutions. In 2005 Veracity launched the world’s first Ethernet over coax solution. As a market leader, the full range of multi-channel Ethernet over Coax, extreme distance Ethernet and other transmission products will be on show. Experience Rapid Growth This includes LONGSPAN, which delivers IP video and POE (Power over Ethernet) over a distance of 820m on standard Ethernet cable! Veracity will also have its informative IP transmission workshop running on stand SA-J31. UK-based Veracity operates from its regional office in Jumeirah Lakes Towers, Dubai, and continues to experience rapid growth fueled by the development of strong relationships with many customers and partners across the Middle East. Veracity experts will be available throughout Intersec at stand SA-J31 from the 20th to 22nd of January 2019 at the Dubai World Trade Centre. Make sure you visit veracity’s stall.