Fujifilm Network / IP Cameras(1)
The FUJINON SX800 camera system marks FUJIFILM's successful entry into the surveillance systems market. FUJIFILM presents the new long-range camera module FUJINON SX800 to the surveillance systems market. With a full HD camera and an optically stabilized, 40x zoom lens from FUJINON, two high-performance components are integrated into one system. This innovation is the result of years of experience in digital cameras and a dedication to the highest optical quality. Thanks to its powerful 1/1.8" image sensor, the long focal length range of 20 mm to 800 mm and state-of-the-art image processing technology, the FUJINON SX800 is ideally suited for aerial surveillance. In modern society, the security needs of citizens are constantly increasing. Surveillance cameras with long focal lengths are not only used to address sensitive issues such as border security but are increasingly being incorporated into public infrastructure such as airports, seaports and motorways. Long range surveillance systems must cope with special challenges. For optics with long focal lengths, the smallest vibrations are sufficient to compromise the image information. Heat haze or fog in the air also impair image quality. And, a focus drive that is too slow leads to safety-relevant information loss. However, with the development of the new FUJINON SX800, FUJIFILM has found a way to minimize the impact of these challenges. Instead of developing a surveillance camera and a separate matching lens, the concept of a fully integrated system consisting of camera and lens has been realized. In addition to the high-quality zoom optics, the FUJINON SX800 has a powerful combined optical and electronic image stabilization mechanism that provides angle correction of up to ±0.22 degrees. The integrated high-speed autofocus provides a sharply focused image in less than a second, while a fog filter and heat haze reduction technology helps prevent weather interference. The system provides consistently sharp images – even of objects several kilometers away. In addition, the integrated design of the new FUJINON SX800 reduces the high adjustment effort normally required for camera installation. As of Q3 2019, the FUJINON SX800 will be available as both a mobile stand-alone device and as a system that can be integrated into a pan-tilt head.Add to Compare
Browse Network / IP Cameras
IP camera products updated recently
Back in the 1960s a lead engineer working in conjunction with the United States Navy for Lockheed’s Skunk Works team coined the acronym KISS, which translated to the design principle ‘keep it simple stupid’. The KISS principle embraces the concept of simplicity, stating that most systems work best if they are kept simple rather than geared up to be more complicated. When it comes to physical security systems, this concept can also play a key element in its overall success. Secure work environments For years the tug of war in the security industry has pitted the need for a secure environment against the desire for technology that is convenient for users. However, finding a happy medium between the two has often seemed elusive. I believe you can design and have operational convenience at the same time as achieving high security" Jeff Spivey, a security consultant and the CEO of Security Risk Management, has this to say about it, “If there is an understanding of the security-related risks and their separate and/or collective impact on the organization’s bottom line business goals, a resolution can be reached.” Jeff also does not think that convenience and high security have to be opposing each other. He says, “I believe you can design and have operational convenience at the same time as achieving high security.” Importance of secure access control The premise is that for organizations and spaces to be truly secure, they must be difficult to access. So, by its very nature, access control is designed to be restrictive, allowing only authorized staff and visitors to access a facility or other secured areas inside. This immediately puts convenience at odds with security. Most people will tolerate the restrictive nature of a controlled entrance using badge, card or biometric because they understand the need for security. When that technology gets in the way of staff traversing freely throughout the facility during the course of a business day, or hindering potential visitors or vendors from a positive experience entering the building, they become less tolerant, which often leads to negative feedback to the security staff. Enhancing corporate security Security consultants like Spivey and security directors all stress that understanding the threats and risk levels of an organization will most likely dictate its physical security infrastructure and approach. All the technology in the world is useless if it is not embraced by those who are expected to use it and it doesn’t fit the culture of the organization. Once employees and customers are educated about what security really is, they understand that they're not losing convenience, they're gaining freedom to move safely from point A to point B. Converged data and information shape new access options Migration of physical access control systems to a more network-centric platform is a game-changer for security technologies The migration of physical access control systems to a more network-centric platform has been a game-changer for emerging security technology options. The expansion of the Internet of Things (IoT), Near-Field Communication devices powered by Bluetooth technology, and the explosion of converged information systems and identity management tools that are now driving access control are making it easier than ever before for employees and visitors to apply for clearance, permissions and credentials. Wireless and proximity readers Advancements in high-performance wireless and proximity readers have enhanced the user’s access experience when presenting credentials at an entry and expediting movement throughout a facility. A user is now able to access a secured office from street-level without ever touching a key or card. Using a Bluetooth-enabled smartphone or triggering a facial recognition technology, they enter the building through a security revolving door or turnstile. A total building automation approach adds extra convenience, as well as seamless security, when access technology is integrated into other systems like elevator controls. A total building automation approach adds extra convenience and seamless security How to Meet Security Concerns at the Entry While security managers are charged with providing their facilities the maximum level of security possible, there is always the human element to consider. But does the effort to make people comfortable with their security system ecosystem come at a cost? Does all this convenience and the drive to deliver a positive security experience reduce an organization’s overall levels of security? And if so, how can we continue to deliver the same positive experience including speed of entry – while improving risk mitigation and threat prevention? Door entrances, barriers Users can slip through the door or turnstile barriers while they are still open after a credentialed individual has gone through Let’s examine some of the various types of entrances being used at most facilities and the security properties of each. With some entrance types, there is the possibility for security to fall short of its intended goals in a way that can’t be addressed by access control technology alone. In particular, with many types of doors and barriers, tailgating is possible: users can slip through the door or turnstile barriers while they are still open after a credentialed individual has gone through. To address this, many organizations hire security officers to supervise the entry. While this can help to reduce tailgating, it has been demonstrated that officers are not immune to social engineering and can often be “talked into” letting an unauthorized person into a facility. Deploying video cameras, sensors Some organizations have deployed video surveillance cameras or sensors to help identify tailgaters after the fact or a door left open for longer than rules allow. This approach is not uncommon where facilities have attempted to optimize throughput and maintain a positive experience for staff and visitors. Security staff monitoring the video feeds can alert management so that action can be taken – but this is at best a reactive solution. It does not keep the unauthorized persons from entering, and so is not a totally secure solution. Optical turnstiles, speedgates Security staff should carefully evaluate its facility’s needs and consider the technology that is built into the door itself Security staff should carefully evaluate its facility’s needs and consider the technology that is built into the door itself. Not all security entrances work the same way. And, there will always be a balance between security and convenience – the more secure the entry, the less convenient it is for your personnel and visitors to enter your facility. For example, it takes more time to provide 2-factor authentication and enter through a mantrap portal than to provide only one credential and enter through an optical turnstile or speedgate. Perimeter protection So, it is an important first step to determine what is right at every entrance point within and around the perimeter. Remember that convenience does not equate to throughput. Convenience is the ease and speed of entry experienced by each individual crossing that threshold, while throughput relates to the speed at which many individuals can gain access to the facility. A more convenient entry makes a better first impression on visitors and is good for overall employee morale. Throughput is more functional; employees need to get logged in to begin their workday (and often to clock in to get paid), and they quickly become frustrated and dissatisfied when waiting in a long line to enter or exit the premises. Considering form and function when designing a security entrance can ensure that those requiring both high-security and convenience are appeased.
Imagine a home surveillance camera monitoring an elderly parent and anticipating potential concerns while respecting their privacy. Imagine another camera predicting a home burglary based on suspicious behaviors, allowing time to notify the homeowner who can in turn notify the police before the event occurs—or an entire network of cameras working together to keep an eye on neighborhood safety. Artificial Intelligence vision chips A new gen of AI vision chips are pushing advanced capabilities such as behavior analysis and higher-level security There's a new generation of artificial intelligence (AI) vision chips that are pushing advanced capabilities such as behavior analysis and higher-level security to the edge (directly on devices) for a customizable user experience—one that rivals the abilities of the consumer electronics devices we use every day. Once considered nothing more than “the eyes” of a security system, home monitoring cameras of 2020 will leverage AI-vision processors for high-performance computer vision at low power consumption and affordable cost—at the edge—for greater privacy and ease of use as well as to enable behavior analysis for predictive and preemptive monitoring. Advanced home monitoring cameras With this shift, camera makers and home monitoring service providers alike will be able to develop new edge-based use cases for home monitoring and enable consumers to customize devices to meet their individual needs. The result will be increased user engagement with home monitoring devices—mirroring that of cellphones and smart watches and creating an overlap between the home monitoring and consumer electronics markets. A quick step back reminds us that accomplishing these goals would have been cost prohibitive just a couple of years ago. Face recognition, behavior analysis, intelligent analytics, and decision-making at this level were extremely expensive to perform in the cloud. Additionally, the lag time associated with sending data to faraway servers for decoding and then processing made it impossible to achieve real-time results. Cloud-based home security devices The constraints of cloud processing certainly have not held the industry back, however. Home monitoring, a market just seven years young, has become a ubiquitous category of home security and home monitoring devices. Consumers can choose to install a single camera or doorbell that sends alerts to their phone, a family of devices and a monthly manufacturer’s plan, or a high-end professional monitoring solution. While the majority of these devices do indeed rely on the cloud for processing, camera makers have been pushing for edge-based processing since around 2016. For them, the benefit has always been clear: the opportunity to perform intelligent analytics processing in real-time on the device. But until now, the balance between computer vision performance and power consumption was lacking and camera companies weren’t able to make the leap. So instead, they have focused on improving designs and the cloud-centric model has prevailed. Hybrid security systems Even with improvements, false alerts result in unnecessary notifications and video recording Even with improvements, false alerts (like tree branches swaying in the wind or cats walking past a front door) result in unnecessary notifications and video recording— cameras remain active which, in the case of battery powered cameras, means using up valuable battery life. Hybrid models do exist. Typically, they provide rudimentary motion detection on the camera itself and then send video to the cloud for decoding and analysis to suppress false alerts. Hybrids provide higher-level results for things like people and cars, but their approach comes at a cost for both the consumer and the manufacturer. Advanced cloud analytics Advanced cloud analytics are more expensive than newly possible edge-based alternatives, and consumers have to pay for subscriptions. In addition, because of processing delays and other issues, things like rain or lighting changes (or even bugs on the camera) can still trigger unnecessary alerts. And the more alerts a user receives, the more they tend to ignore them—there are simply too many. In fact, it is estimated that users only pay attention to 5% of their notifications. This means that when a package is stolen or a car is burglarized, users often miss the real-time notification—only to find out about the incident after the fact. All of this will soon change with AI-based behavior analysis, predictive security, and real-time meaningful alerts. Predictive monitoring while safeguarding user privacy These days, consumers are putting more emphasis on privacy and have legitimate concerns about being recorded while in their homes. Soon, with AI advancements at the chip level, families will be able to select user apps that provide monitoring without the need to stream video to a company server, or they’ll have access to apps that record activity but obscure faces. Devices will have the ability to only send alerts according to specific criteria. If, for example, an elderly parent being monitored seems particularly unsteady one day or seems especially inactive, an application could alert the responsible family member and suggest that they check in. By analyzing the elderly parent’s behavior, the application could also predict a potential fall and trigger an audio alert for the person and also the family. AI-based behavior analysis Ability to analyze massive amounts of data locally and identify trends is a key advantage of AI at the edge The ability to analyze massive amounts of data locally and identify trends or perform searches is a key advantage of AI at the edge, for both individuals and neighborhoods. For example, an individual might be curious as to what animal is wreaking havoc in their backyard every night. In this case, they could download a “small animal detector” app to their camera which would trigger an alert when a critter enters their yard. The animal could be scared off via an alarm and—armed with video proof—animal control would have useful data for setting a trap. Edge cameras A newly emerging category of “neighborhood watch” applications is already connecting neighbors for significantly improved monitoring and safety. As edge cameras become more commonplace, this category will become increasingly effective. The idea is that if, for example, one neighbor captures a package thief, and then the entire network of neighbors will receive a notification and a synopsis video showing the theft. Or if, say, there is a rash of car break-ins and one neighbor captures video of a red sedan casing their home around the time of a recent incident, an AI vision-based camera could be queried for helpful information: Residential monitoring and security The camera could be asked for a summary of the dates and times that it has recorded that particular red car. A case could be made if incident times match those of the vehicle’s recent appearances in the neighborhood. Even better, if that particular red car was to reappear and seems (by AI behavior analysis) to be suspicious, alerts could be sent proactively to networked residents and police could be notified immediately. Home monitoring in 2020 will bring positive change for users when it comes to monitoring and security, but it will also bring some fun. Consumers will, for example, be able to download apps that do things like monitor pet activity. They might query their device for a summary of their pet’s “unusual activity” and then use those clips to create cute, shareable videos. Who doesn’t love a video of a dog dragging a toilet paper roll around the house? AI at the Edge for home access control Home access control via biometrics is one of many new edge-based use cases that will bring convenience to home monitoring Home access control via biometrics is one of many new edge-based use cases that will bring convenience to home monitoring, and it’s an application that is expected to take off soon. With smart biometrics, cameras will be able to recognize residents and then unlock their smart front door locks automatically if desired, eliminating the need for keys. And if, for example, an unauthorized person tries to trick the system by presenting a photograph of a registered family member’s face, the camera could use “3D liveness detection” to spot the fake and deny access. With these and other advances, professional monitoring service providers will have the opportunity to bring a new generation of access control panels to market. Leveraging computer vision and deep neural networks Ultimately, what camera makers strive for is customer engagement and customer loyalty. These new use cases—thanks to AI at the edge—will make home monitoring devices more useful and more engaging to consumers. Leveraging computer vision and deep neural networks, new cameras will be able to filter out and block false alerts, predict incidents, and send real-time notifications only when there is something that the consumer is truly interested in seeing. AI and computer vision at the edge will enable a new generation of cameras that provide not only a higher level of security but that will fundamentally change the way consumers rely on and interact with their home monitoring devices.
Protecting against fire and security risks is an essential aspect of life for people and across all sectors. However, there is an increasing expectation and demand on fire and security providers, in areas such as education. The securitisation of our world paired with the rapid speed of communication and news updates means that young people especially have the potential to be more aware of potential dangers and threats to their own safety and the safety of those around them. Education institutions are large and sometimes sprawling sites that present considerable fire and security challenges. From Kindergartens to Colleges Each education site brings distinct challenges, with differing facilities and specialties, as well as the need to maintain the capacity of students, teachers and lecturers to study, learn and teach at the high level expected.Each education site brings distinct challenges, with differing facilities and specialties While some schools and universities are based in urban areas with a mix of heritage and high rise buildings, others are sprawled across green open spaces. Some of these sites have specialised sporting facilities, while others may be focused on engineering or scientific study, with costly technical equipment. Kindergartens and primary schools have their own unique requirements. Parents expect the highest safety standards, while schools require safety in addition to efficient facilities management. The demographic of these institutions is predominantly young children, who are often unaware of or only just learning about fire safety and personal safety. This creates a huge vulnerability and an added onus on teachers to keep their students safe. Facial recognition at West Academy of Beijing In response to this need, Chubb China upgraded the closed-circuit television (CCTV) system for Western Academy of Beijing (WAB) focusing on elevating video content analytic features, including maximised CCTV monitoring, automatic police calling, and a smart search solution. Complementing this, a facial recognition system capable of finding the exact location of a student on campus within 30 seconds was added, aided by real-time remote gate operation. This integrated and advanced system resulted won the "High Quality Educational Technology Suppliers for School" award for the WAB project at the 2019 BEED Asia Future Oriented Construction of Universities and Schools Seminar. This award recognizes outstanding solution design and project execution. Parents expect the highest safety standards, while schools require safety in addition to efficient facilities management Awareness remains important at university As students graduate from kindergarten, primary school, junior and senior school, they become more aware of fire safety, relevant dangers and how to protect themselves. Unfortunately, external dangers remain. There are particularly high stakes for university campus facilities managers The safety of students in a university environment is also critical. It is often the first time young people live away from their family home and have the independence of adulthood. For this reason, there are particularly high stakes for university campus facilities managers. In the eventuality of a fire, students could be at great risk and, beyond the immediacy of physical harm, this can have serious ramifications for the reputation of an educational institution. Integrated solutions Integrated solutions must be nimble and adapted to a range of site types including campus residences, recreational areas, open spaces and lecture theatres. Chubb Sicli recently identified and overcame these challenges through the installation of a full suite of fire safety and security equipment and services at Webster University Geneva. Established in Switzerland in 1978, Webster University Geneva is an accredited American university campus that offers programs in English to students interested in undergraduate or graduate-level education. Located in the Commune of Bellevue, just a few kilometres from Geneva's central station, the campus of Webster University Geneva includes five buildings in a park-style atmosphere. Full fire and security audit Chubb Sicli provided Webster’s fire extinguisher maintenance for over 25 years. This business relationship led to a full fire and security audit that identified the need for updates to the university’s security installation. The initial audit showed several improvements to the university’s security profile were needed.The challenge was to create and provide an effective and interconnected fire and security solution The challenge was to create and provide an effective and interconnected fire and security solution, enhancing the security of the student population and its ever-evolving needs. This included complete fire detection and intruder alarms for all five buildings, upgrades to existing CCTV systems, new video surveillance equipment and an automated fire extinguishing system in the kitchen areas. In addition to this integrated system solution, Webster University required access control for all main entrances, with the requirement that all documentation to be made available in English, because Webster is an American company. Customized solution Chubb Sicli’s quality, capability, and security expertise provided a customized solution for the unique educational establishment. Not only was the solution both tailored and integrated, the approach and planning were based on audit, fire extinguisher and emergency light maintenance, fire detection, intrusion detection, access control, video surveillance and Fire Detection. Through dedicated and integrated fire safety support, Chubb provides students and families peace of mind and security. From the moment a young child enters the education system, Chubb’s diligent and effective surveillance and fire safety systems work to prevent and protect, offering a new kind of ‘end-to-end’ service for education systems around the world.
Fujifilm and Videotec announce a new collaboration, integrating top-performance products to supply an innovative solution for accurate long-range surveillance. This solution is ideal for protecting critical infrastructure and transportation networks, including airports, harbours, highways, borders and the environment. The combined system incorporates Fujifilm’s new high-end SX800 camera into Videotec’s ULISSE MAXI PTZ. Integrating the SX800 camera into the robust and precise ULISSE MAXI positioning unit is simple and fast, resulting in a first-class PTZ IP camera system for monitoring perimeters and extensive outdoor areas. Maximum resistance motors ULISSE MAXI is a powerful Full-IP PTZ for outdoor IP video surveillance, which can manage IP cameras with large-size lenses, with easy integration into a network system via ONVIF protocol. The sturdy mechanical structure and the powerful motors of the ULISSE MAXI PTZ are designed to guarantee maximum resistance to high operating stress, vibrations and to withstand harsh weather conditions. The unit is equipped with a wiper for removing rain and dust from the front glass. The SX800 camera lens offers a 40x optical zoom that covers a broad range of focal lengths from 20 mm on the wide-angle end to 800mm on the telephoto end, constantly providing sharp images and detailed closeups. It is complemented with 1.25x digital zoom to achieve long-range surveillance equivalent to 1000mm in focal length. The built-in image stabilizer accurately compensates for camera movement, typically caused by gusts of wind or structure vibrations. The system is particularly effective when shooting in the ultra-telephoto range, which is susceptible to even the smallest movement. Advanced de-Fog function With a highly sensitive sensor and advanced noise reduction, the SX800 can shoot clear footage with minimal noise even in low-light conditions. The advanced de-fog function brings vivid clarity to hazy images caused by light diffusion due to mist and dust. Alessio Grotto, President of Videotec said: “Our ULISSE MAXI coupled with Fujifilm’s SX800 is the perfect solution when operating cameras in the most challenging environments, and to get the best possible image quality while meeting the needs of the most demanding long-range surveillance applications.”
The merger between Fujinon and FUJIFILM has been officially publishedOn 27 July 2011 the completed merger of Fujinon (Europe) GmbH into FUJIFILM Europe GmbH was published. With this merger Fujifilm made a major step towards the consolidation and integration of core business activities in Europe. Prior to that, in July 2010, FUJIFILM Corporation, Tokyo, had absorbed its wholly-owned direct subsidiary Fujinon Corporation. Following that move, respective changes were initiated in other regions of the world.Before the merger Fujinon (Europe) GmbH operated mainly in two market segments: Endoscopy Systems and Optical Devices. Within FUJIFILM Europe the Endoscopy Systems unit is integrated into the European Business Domain Medical Systems. It well supplements the existing product portfolio and enables Fujifilm to offer an enhanced product range out of one hand. The Optical Devices business was established as a new European Business Domain within the FUJIFILM Europe organization. Thereby, the Optical Devices business is given an enhanced and widened platform for successfully expanding its activities.About Fujifilm in EuropeNowadays Fujifilm entities operate in over 50 group companies in Europe and employ more than 5,000 people engaged in R&D, manufacturing, sales, and service support. Throughout Europe they serve a range of industries including medical, chemical, graphic arts, electronic materials, optics, recording media, motion picture, and photographic technologies. FUJIFILM Europe GmbH (Duesseldorf, Germany) acts as Strategic Headquarters for the region and supports its group companies in Europe by formulating marketing and corporate strategies.About FUJIFILM CorporationFUJIFILM Corporation is one of the major operating companies of FUJIFILM Holdings. Since its founding in 1934, the company has built up a wealth of advanced technologies in the field of photo imaging, and in line with its efforts to become a comprehensive healthcare company, Fujifilm is now applying these technologies to the prevention, diagnosis and treatment of diseases in the Medical and Life Science fields. Fujifilm is also expanding growth in the highly functional materials business, including flat panel display materials, and in the graphic systems and optical devices businesses.
Fujinon to introduce three new lenses within YV Series at ISC West 2009At the ISC West convention this April in Las Vegas, Fujinon (Booth 8141) will introduce three new megapixel, vari-focal lens options designed for CS mount, 1/3-inch camera formats. Designed for small to medium-sized room applications, the YV2.8x2.8SA-2 is a 2.8-8mm, F1.2 lens. The YV4.3x2.8SA-2, a 2.8-12mm, F1.4 lens, offers greater flexibility and is the preferred choice for larger room applications. The Y3.3x15SA-2 is a compact design 15-50mm, F1.5 lens used when greater object distance is required, such as hallways and parking lots. All three of these lenses were released last year as auto iris DC Type models.Fujinon will introduce a total of 10 new megapixel vari-focal lenses at ISC West. Earlier this year, Fujinon announced a new ultra wide, 120-degree horizontal megapixel vari-focal lenses in both manual and auto iris DC Type, as well as a Day/Night megapixel vari-focal version in auto iris DC Type. Most recently, four 1/2-inch camera format megapixel lenses were announced, a 3.8-13mm for broad range applications and an 8-80mm designed for longer distance telephoto-type applications. The 1/2-inch format megapixel lenses come in both manual and auto iris DC Type models.Fujinon is dedicated to providing the highest quality and broadest range of "C" and "CS" mount lenses at competitive pricing.
3 Reasons To Migrate To A New Access Control SystemDownload
Schooling the Market on Education SecurityDownload
Lawrence, Massachusetts Deploys FLIR Video System For SafetyDownload
- Hanwha And Genetec Help Planet Fitness Boost Security And Performance
- Videonetics Security Cameras, ANPR And UVCP Help Secure Vadodara City In Gujarat, India
- Videalert Provides Mobile Enforcement Vehicle (MEV) Solution To Wiltshire Council
- Chocolate Nation Installs Panasonic Security Cameras And Laser Projectors At Its Immersive Belgium Museum