Check Out Our Special Report On Casino Security

Teleste MCC201 One Channel H.264/MJPEG IP Video Server

Technical Specification

Features:

Make: Teleste
Model code: MCC201
Video Inputs: 2
Data Input: Yes
Audio Input: Yes

Additional info:

Teleste MCC201 is an entry level video server for H.264/MJPEG HD and SD operations. It is also compatible with conventional analogue composite video, too. The unit supports video resolutions starting from CIF level up to 1920x1080p30 resolution. It can be taken in use either for video encoding or decoding purposes. MMC201 is ONVIF/PSIA compatible and can operate as a part of a video management system. In addition to video features MCC201 has two data ports for PTZ camera control and serial device communication. For audio operation there are two channels that can be switched to simplex or duplex modes. For alarm and event activities MCC201 has a built-in video motion detection functionality and two sensor inputs (calendar synchronised).

Contact manufacturer Contact manufacturer

Datasheet Datasheet

Make	Teleste
Manufacturer	Teleste Corporation
Category	Video Surveillance>Video servers (IP transmission)
Model code	MCC201
Video Inputs	2
Data Input	Yes
Audio Input	Yes
Alarm Input	Yes
No of Other Outputs	2
Compression Type	H.264/M-JPEG
Network Protocols	IPv4/v6, TCP, UDP, IGMP, ICMP, DHCP, HTTP, HTTPS, RTP, RTSP, FTP, SNMP, SMTP, UPnP, WSD, Zeroconf, NTP, DDNS
Interface	10/100 Base-Tx
Resolution TVL	1920 x 1080
Image per second (IPS)	30
Control	PTZ
Physical Specifications	Dimensions mm: 33 x 134 x 125 Weight g: 500
Electrical Specifications	Power Consumption: 9.6 W Voltage: 12 V DC
Environmental Specifications	Operating Temperature ^oC: -10 ~ +50 C (14 ~ 122 F)
Additional info	Teleste MCC201 is an entry level video server for H.264/MJPEG HD and SD operations. It is also compatible with conventional analogue composite video, too. The unit supports video resolutions starting from CIF level up to 1920x1080p30 resolution. It can be taken in use either for video encoding or decoding purposes. MMC201 is ONVIF/PSIA compatible and can operate as a part of a video management system. In addition to video features MCC201 has two data ports for PTZ camera control and serial device communication. For audio operation there are two channels that can be switched to simplex or duplex modes. For alarm and event activities MCC201 has a built-in video motion detection functionality and two sensor inputs (calendar synchronised).
Download PDF version Download PDF version