DSC Wireless security

Built-in reed switch Wafer-thin profile Long-life lithium battery included 16 mm (5/8") magnet gap Includes double-sided tape Reliable 868 MHz technology

DSC WS4926 wireless photoelectric smoke detector features automatic drift compensation, built-in 85dB horn, local test button, low profile design, high/low sensitivity reporting, easy-maintenance removable smoke chamber and long-life lithium batteries included. The detector is UL/ULC listed for residential applications.

New to the DSC family of wireless sensors, the WS4985 flood detector is a wireless detector designed to work with the Alexor wireless panel as well as DSC 1-Way wireless receivers. The WS4985 flood detector senses the presence of water in basements, laundry rooms, bathrooms, kitchen and numerous other areas where water may leak or flood, prompting advance warning of potential flooding.

The WS8965W tri-zone wireless door/window contact adds value to any installation by providing installers with three zones and reliable 868 MHz technology. The device can be mounted in the traditional manner, or if that is inconvenient for applications such as garage doors, it can be configured for normally closed “tilt switch” operation. In addition, the WS8965W has two normally closed external contact inputs that can be used for additional hardwired contacts or other dry contact switches. The internal contact provides a generous magnet gap of 13 mm (1/2”) and flexibility during difficult installations as it easily accommodates larger doors or window frames.

In combination with DSC's 2-Way wireless security suite, the WS8913 EU carbon monoxide detector provides front line protection against the silent threat of carbon monoxide poisoning. WS8913 EU’s wireless function offers the transmission of important messages to the panel, through either explicit or generic trouble indications, including: trouble, endof-life (EOL), tamper and battery conditions.

DSC WS4913 wireless detector provides frontline protection against the silent threat of carbon monoxide poisoning. It features electrochemical sensing technology.

The WS8945W is designed for dependable case-tamper or walltamper detection. It’s streamline profile and new design allows for double-sided tape mounting. WS8945W features a pre-installed battery that is activated by installers through a pull tab. This helps reduce installation time as casings don’t need to be opened for battery insertion. Simply draw the activation pull tab and mount the contact.

DSC WS4975 wireless vanishing door/window contact is built with reliable 433 MHz technology, uses a long-life lithium battery and is compatible with all current DSC wireless receivers. The WS4975W is housed within a compact casing that allows it to be used for the tightest-fitting installations.

The 3G3070 connects the alarm control panel to the HSPA network and reports alarm signals directly to a monitoring station receiver (Sur-Gard System I/II/III/IV). The 3G3070 uses the HSPA network to ensure lowcost, high-speed and reliable alarm communications and is compatible with control panels that communicate using the Contact ID format. The 3G3070 is installed between the telephone connection of a control panel and telephone line. When used in a backup role, the communicator assesses the connection to the PSTN phone line, and if that has failed, it then connects to the HSPA network to send an alarm signal to the monitoring station. In a primary role, the communicator simply sends the alarm transmission over the HSPA network immediately.

DSC offers 3G2060R HSPA wireless alarm communicator. When connected to a DSC PowerSeries PC1864/1832/1616 control panel, alarm reporting paths can be combined through the Public Switched Telephone Network (PSTN) if so desired, plus the HSPA channels. It conveniently utilizes the HSPA network as back-up to ensure high speed, reliable and secure alarm communications. With the HSPA backup feature, any concerns about the possibility of phone line disruption is removed. The 3G2060R offers full data reporting and remote management for installers, saving time and reducing costs.

The 3G3070CF connects the alarm control panel to the HSPA network and reports alarm signals directly to a monitoring station receiver (Sur-Gard System I/II/III/IV). The 3G3070CF uses the HSPA network to ensure lowcost, high-speed and reliable alarm communications and is compatible with control panels that communicate using the Contact ID format. The 3G3070CF is compliant with the latest requirements for communications methods as per UL864 and NFPA72 2010 edition. It can be used in fire monitoring applications as a single communications technology, in which case any failure of the communications path shall be annunciated at the supervising station within 5 minutes of the failure, or it can be used as part of a multiple communications technologies.

DSC 3G8080(I) redefines intrusion security by combining the flexibility of a modular, hardwired system with the simplicity of a wide range of wireless devices and peripherals, resulting in the most comprehensive hybrid system available. The Wireless Alarm Communicators add Z-Wave capabilities to the PowerSeries Neo platform for interactive security, video monitoring, energy management and home automation features.

DSC CD8080(I) redefines intrusion security by combining the flexibility of a modular, hardwired system with the simplicity of a wide range of wireless devices and peripherals, resulting in the most comprehensive hybrid system available. The Wireless Alarm Communicators add Z-Wave capabilities to the PowerSeries Neo platform for interactive security, video monitoring, energy management and home automation features.

DSC WT5500A provides an easy-to-use and convenient main interface to the system. The WT5500 can be conveniently located on the wall just inside the front door or on a desk-stand in the kitchen or even near a bedside. The WT5500 is entirely wire-free. With batteries as its main power source, it does not require any drilling or electrical wiring for its installation and operation.

The GS3105 is a GSM/GPRS interface and a standalone device capable of generating voice dialer messages and SMS event notifications. Its onboard outputs can be triggered remotely via telephone to activate external equipment or indicators. The GS3105 simulates the PSTN line and decodes Contact ID format, so it is virtually “invisible” to the control panel it is connected to. Simple to install and program, the GS3105 is equipped with a quad band GSM/ GPRS radio and remote antenna with magnetic base. Its extremely small size and low current draw allows for installation inside the control panel’s cabinet and does not require an additional battery.

DSC GS3055-IG GSM universal wireless alarm communicator works by connecting the control panel to the GSM network to provide protection against accidental line cuts caused by storms, construction or deliberate tampering. In the event of an alarm, the communicator assesses its connection to the PSTN phone line, and if that has failed, they it automatically connect to the GSM network to send an alarm signal to the monitoring station. The communicator is able to use the GPRS data channel of the GSM network to ensure low-cost, high-speed and reliable alarm communications.

DSC GS3055-IGW GSM universal wireless alarm communicator works by connecting the control panel to the GSM network to provide protection against accidental line cuts caused by storms, construction or deliberate tampering. In the event of an alarm, the communicator assesses its connection to the PSTN phone line, and if that has failed, they it automatically connect to the GSM network to send an alarm signal to the monitoring station. The communicator is able to use the GPRS data channel of the GSM network to ensure low-cost, high-speed and reliable alarm communications.

The IMPASSA Strategy: Detect. Defend. Defeat. IMPASSA is the newest, next generation wireless security system from DSC. IMPASSA comes with the defense and offense needed to protect the ‘king’ – the home and homeowner - including: An integrated HSPA (3G) cellular communicator for high speed, reliable and secure alarm communications. The flexibility of a distributed approach that allows wireless devices to be located wherever needed for optimal protection. As easy as setting up a chessboard, installers can now deliver a full featured home security solution in minutes by easily enrolling a range of compatible wireless devices into the IMPASSA security system. Defensive Strategy - Integrated 3G Cellular Communicator As any good chess player knows, looking many moves ahead is critical for a checkmate. As more homeowners transition away from traditional phone lines towards VoIP (Voice over IP) or mobile wireless phones for communication, IMPASSA delivers an alternate communication path using the cellular network. In addition, IMPASSA includes a more traditional phone line communicator using the Plain Old Telephone Systems (POTS). The IMPASSA integrated communicator uses proven 3G technology. This not only allows for faster data-transmission speeds, but provides a longer lifecycle as cellular providers begin to phase out their GSM (2G) networks. Just like a mobile phone, IMPASSA displays the cellular signal strength to help determine the optimal mounting position within the home. For the homeowner’s convenience, the real time clock updates the time and date via the cellular communicator.

DSC IS214 Image Sensor is a breakthrough new product that combines a wireless PIR (Passive Infrared) motion sensor, an integrated still camera, full wireless communications. The IS214 Image Sensor offers an entirely new service to customers designed to increase engagement through on-demand property views. The IS214 Image Sensor is simple to install - no wires to run for setup, power or signal communication.

The GS3125 is a GSM / GPRS interface and a standalone device capable of generating voice dialer messages and SMS event notifications. Its onboard outputs can be triggered remotely via telephone to activate external equipment or indicators. The GS3125 simulates the PSTN line and decodes Contact ID format, so it is virtually “invisible” to the control panel it is connected to. The GS-3125 is the best solution for reliable GSM alarm communication back up for the majority of applications, whether new or existing system upgrades.

DSC WS4904P wireless passive infrared detector achieves superior detection and false alarm prevention through digital signal analysis. The detector’s technology adapts to changing environmental conditions by adjusting critical detection parameters to provide improved consistency of detection over all temperature ranges.

Visible link quality indicator on device 110dB Siren with Strobe Light Differentiated audible alerts for intrusion and fire

Coverage area – 50ft (15m), 90° Mirror optics offer exceptionally high detection sensitivity and immunity to false alarms Vandal-resistant design (Small, recessed and robust slot window) Easy to install - no vertical adjustment needed Front and Back tamper

Visible link quality indicator on device Ideal for protection of doors and windows Selectable curtain coverage 2, 4 and 6 m (6,12,18ft) Front cover and back tamper

Glass break detection of plate, tempered, laminated and wired glass Detection rage up to 20ft (6m) Visible link quality indication shown on the device Acoustic Pattern Recognition Technology provides 360° coverage Visible and transmitted low battery indication

Visible link quality indicator on the device High immunity to background vibrations Adjustable shock/vibration thresholds Front and Back tamper Optional magnetic reed switch contact

DSC C24-CAM54IR IP camera with IR illumination allows for indoor and outdoor use in both lit and low light situations. The camera automatically provides extra IR illumination when enough visible light is not available for proper operation. Connectivity is provided through either a hardwired or wireless IP connection to the C24-HUB.