AMAG Technology, global unified solutions provider to help organizations mitigate risk, meet compliance and save money, unveiled the Symmetry M4000 Intelligent Door Controller. The new controller is the next generation Symmetry panel to the Symmetry M2150 Controller. The powerful, flexible and open M4000 protects all types of buildings while maintaining a low cost of ownership. Symmetry M4000 Intelligent Door Controller The Symmetry M4000 provides distributed intelligence for Symmetry Security Management Systems which can be used for simple applications to enterprise-wide deployments. The controller supports four doors, up to one million credentials and 65,000 off-line transactions, which can be expanded further if required. Install multiple controllers to a single network connection with up to 20 readers, 80 inputs and 64 outputs. The controllers will operate with Symmetry Access Control software V9.1 and above. The Symmetry M4000 provides distributed intelligence for Symmetry Security Management Systems The Symmetry M4000 supports OSDP, Wiegand and AMAG’s own MCLP reader communications, enabling organizations to install industry standard Symmetry access control software and modules and providing end users with the option to choose any card reader that fits their unique needs and requirements. It comes with an onboard 1Gb network interface with AES encryption capability. Symmetry Sentry Remote Management Tool Symmetry Sentry, a remote management tool, is available to allow web-based configuration, monitoring and upgrading of the Symmetry M4000. This saves time and money by allowing the integrator to manage the controller from their office or an independent location. “The Symmetry M4000 Intelligent Door Controller is designed to secure buildings of any size. The controller’s open-source operating system and API will allow any company to integrate it,” said AMAG Technology, Product Manager, Andy Goodwin. “The M4000 demonstrates AMAG’s commitment to providing open and standards-based solutions to our customers.” Two new enclosures are available to house two or four controllers.
Security Directors can now effortlessly install, upgrade and configure their Symmetry Security Management System, providing a more safe and secure environment for employees and visitors with AMAG Technology’s new version 9 release of Symmetry Access Control Software. The Symmetry V9 software is streamlined to be more efficient and dramatically reduce setup time. With a new built-in installation tool, the new version of software simply overwrites the older version, maintaining database integrity and ensuring a smooth upgrade process. “Symmetry V9 software now aligns with AMAG’s newly configured product portfolio allowing for simple and automatic upgrades,” said AMAG Technology Product Manager, Andy Goodwin. “The expedient process improves efficiency, provides more security and delivers several new customer-driven enhancements to improve performance and increase safety.” Symmetry V9 Includes Many New And Enhanced Features To Help Users Mitigate Risk: Setting all access cards to a specific anti-passback zone to enforce access control policies. Integration with Symmetry CONNECT identity management to manage visitors. Configuring individual functional exemptions. Modifying card holder records across all user groups using the data connect module to improve security and efficiency throughout an organization. Raising intrusion duress alarms when arming and disarming within Symmetry Intrusion. Areas can be automatically armed when associated or connected areas are armed. Allowing authorized card holders to toggle between normal door behavior and permanently open behavior at the door itself using a credential. Symmetry V9’s integration with CompleteView video management now leverages FFMPEG as the industry’s leading media framework Improving Video Processing Performance Symmetry V9’s integration with Symmetry CompleteView video management now leverages FFMPEG (Fast Forward Motion Picture Experts Group) as the industry’s leading media framework, which improves video processing performance and image quality and a bulk camera configuration option. Cameras are assignable per workstation, and security personnel can record, replay and control viewed video, providing more flexibility and increased response time. AMAG Technology is an access control, video management, identity management, visitor management and intrusion management unified solution provider that helps companies mitigate risk, enforce compliance and save money.
AMAG Technology, an access control, video management, identity and visitor management solution provider, announces the release of the Symmetry M4000 Intelligent Controller. The new controller, the first available in a full range of controllers, is the next generation Symmetry panel to the Symmetry M2150 Controller. The powerful, flexible and reliable M4000 employs the Linux operating system, providing a flexible platform for future functionality enhancements. The M4000 provides distributed intelligence for Symmetry Security Management Systems which can be used for simple applications to enterprise-wide deployments. The controller supports four doors, 1 million credentials and 65,000 off-line transactions, which can be expanded further if required. The controllers will operate with Symmetry V9 Access Control software. Symmetry Security Management System The M4000 supports OSDP, Wiegand and AMAG’s own MCLP reader communications, enabling organizations to install industry standard Symmetry access control software and modules and providing end users with the option to choose any card reader that fits their unique needs and requirements. A remote monitoring and software tool enables organizations to manage their Symmetry Security Management System from anywhere, providing flexibility and convenience. “The Symmetry M4000 Intelligent Door Controller is designed to secure buildings of any size, and delivers the latest advances in controller technology to provide organizations with a seamless and powerful security system,” said AMAG Technology, Product Manager, Andy Goodwin.
AMAG Technology, a provider of access control, video management, identity and visitor management solutions, announces the release of the Symmetry™ M4000 Intelligent Controller. The new controller, the first available in a full range of controllers, is the next generation Symmetry panel to the Symmetry M2150 Controller. The powerful, flexible and reliable M4000 employs the Linux operating system, providing a flexible platform for future functionality enhancements. M4000 Intelligent Controller Features The M4000 provides distributed intelligence for Symmetry Security Management Systems which can be used for simple applications to enterprise-wide deployments. The controller supports four doors, 1 million credentials and 65,000 off-line transactions, which can be expanded further if required. The controllers will operate with Symmetry V9 Access Control software. The M4000 supports OSDP, Wiegand and AMAG’s own MCLP reader communications, enabling organizations to install industry standard Symmetry access control software and modules and providing end users with the option to choose any card reader that fits their unique needs and requirements. Remote Monitoring For Access Control A remote monitoring and software tool enables organizations to manage their Symmetry Security Management System from anywhere, providing flexibility and convenience. “The Symmetry M4000 Intelligent Door Controller is designed to secure buildings of any size, and delivers the latest advances in controller technology to provide organizations with a seamless and powerful security system,” said AMAG Technology Product Manager, Andy Goodwin. Two new enclosures are being made available to house two or four controllers.
Customers can use either a card, the app on their smartphone or both to open a door with the Symmetry Blue reader AMAG Technology, a security manufacturer specializing in access control, video management, identity management, intrusion detection and visitor management, will be demonstrating its Symmetry Blue reader range at ISC West 2017 at the Sands Expo in Las Vegas between April 5th-7th. The Symmetry Blue reader range combines Bluetooth Low Energy with card reading capabilities to deliver a mobile access control solution to open doors. Used with Android or iOS smart phones alongside or in place of traditional cards, users download the Symmetry Blue app and enroll directly into the Symmetry access control system. Mobile Reader SolutionAMAG Technology The cost-effective mobile solution does not require a license, separate portal or third party subscription. Users simply open a door by holding their cellphone device near the reader, which connects to a door like a conventional card reader. Customers can use either a card, the app on their smartphone or both to open a door. “We are proud to be the first access control company to deliver a mobile reader solution to the market,” said AMAG Technology Product Manager, Andy Goodwin. “With everyone carrying a cell phone, moving to this technology is inevitable and our cost-effective Symmetry Blue reader range and app make this transition easy and affordable.” Using a cell phone as a credential is going to be extremely helpful for users in environments where people tend to lose or forget their cards, where there are occasional attendees at a particular site, for visitors or contractors where you do not want to issue an identity badge, or as a second credential to be used alongside an access card. Hybrid Access Control Many organizations may adopt a hybrid approach, keeping both the card and the smart phone using the Symmetry Access Control software's multiple credentials per cardholder capability. The Bluetooth reader capability could be added to lower security doors or just the minimum number of doors required that allow access to the workplace. Another advantage of using a cellphone app is no physical hand-off of a credential is required. Users just download the app and it is instantly ready for use. This saves time and money and provides a convenient method to implement security.
The Symmetry Blue reader range is used with Android or iOS Smart Phones alongside or in place of traditional cards AMAG Technology, the security solution manufacturer specializing in access control, video management, policy-based identity solutions and visitor management, announces the release of Symmetry Blue, the new Bluetooth reader which delivers a highly secure, convenient and intuitive alternative to open doors. The reader combines Bluetooth Low Energy (BLE) with card reading capabilities to deliver integrated access control for Symmetry customers. Enhancing Mobile Access Control “AMAG steps out into the forefront of the industry with the new Symmetry Blue reader range, offering a mobile access control solution that is not dependent on a portal or subscription to operate,” said AMAG Technology, Product Manager, Andy Goodwin. “By turning smart phones and other mobile devices into credentials, companies can improve internal efficiencies and save money.” Symmetry Blue App The Symmetry Blue reader range is used with Android or iOS Smart Phones alongside or in place of traditional cards. Users simply download the Symmetry Blue app and enroll directly into the Symmetry access control system. The free app does not require a license, a separate portal or a third party subscription, offering an affordable, easy to install access control solution in today’s BYOD environment. After the user downloads the app, they can open a door or entry point by holding their mobile device near the reader. Symmetry Blue is designed to work across the whole Symmetry product range and is compatible with any door controller. Ideal for new or existing installations, the readers also support NXP MIFARE, DESFire or 125khz proximity cards, and customers can use either a card, the app on their smart phone or both. Read ranges from the smart phone are configurable. Symmetry Blue reader range is available with or without keypad, and can be used for indoor or outdoor installations. Symmetry Blue readers are available through certified AMAG Technology integrators. Save
AMAG Technology has released Symmetry™ V8.1 Access Control software. Symmetry V8.1 is available in all product editions: Symmetry Business, Professional, Enterprise, Homeland and Global. Symmetry products give customers a comprehensive end-to-end software platform so users can manage all their security needs while reducing risk and meeting industry compliance. Full Integration With VMS “The Symmetry V8.1 upgrade delivers many access control, intrusion and video enhancements to our software,” said AMAG Technology’s Access Control Product Manager, Andy Goodwin. “Key improvements provide increased functionality, additional third party integrations and compatibility with our new web-based Symmetry GUEST Visitor Management System.” The software fully integrates with the latest version of the Symmetry CompleteView Video Management System. Symmetry CompleteView VMS offers dynamic tools, thumbnail search capability, and a Design Wizard to easily design a video security project. The recently introduced Identity Verification capability has been expanded to be fully operational with any camera or video management system connected to Symmetry. A new feature allows viewing of one large single video image as an alternative to three smaller live images. Symmetry V8.1 integrates with AMAG’s new Symmetry GUEST Visitor Management System. The new cloud based system provides pre-enrollment, advanced self-service features for visitors and an improved customer experience, while improving lobby traffic flow, increasing security and reducing costs. Symmetry V8.1 now integrates with ASSA ABLOY’s Sargent and Corbin Russwin IP-Enabled Locks, which allows users to expand access control to include doors not normally included in a traditional security system. Users can expand their access control system in this way by simply adding a software license. No Symmetry hardware or extra wiring is needed. Viewing Activities In Real-Time Advanced activity filters in Symmetry V8.1 allow users to further drill down to see specific activity of interest in real-time. The filters provide precision, which helps pinpoint movement in investigations. Alarms generated during construction and maintenance periods can distract and inconvenience control centre employees. In a new Maintenance Mode feature, alarms and events from specified door controllers can be diverted to a separate alarm filter within Symmetry during maintenance periods. The Symmetry software prevents the removal of hardware devices if still logically integrated with other items of equipment. A list of connected devices or interfaces now appears at the point of requested hardware deletion making the process more straightforward for the technician. Integration With Burglary And Intrusion Panel Symmetry V8.1 now supports integration with the latest DMP XR550 burglary and intrusion panel. The integration allows users to gain access and disarm an area using a single access card. Alarms from the DMP XR550 panel will appear in Symmetry, providing one user interface to manage alarms. Genetec Security Center v5.3 is supported by Symmetry V8.1 in a two-way integration through a separate Symmetry plug-in. Symmetry V8.1 now supports Microsoft Windows 10 Professional and Enterprise operating systems, so users already using 10 or those who are looking to upgrade to 10 will be compatible.
AMAG Technology, a worldwide provider of complete end-to-end security management solutions for access control and video management, announces the release of Symmetry™ v8.0.2 access control software. Symmetry v8.0.2 software offers end users a complete unified, end-to-end security solution to manage all security and complementary technologies in one place via an intuitive user interface. “We are continuing with our commitment to our integrators and end users to improve our access control feature set and video capabilities with each software upgrade,” said AMAG Technology, Product Manager, Andy Goodwin. “Having the Symmetry v8.0.2 access control software as a FICAM-complaint, GSA approved solution provides AMAG the opportunity to work with federal agencies and help them meet current PACS standards.” Symmetry for US Government Customers: Smart card standards continue to tighten to counter growing physical and cyber threats and the US government has made it mandatory that all access control products meet Federal Identity Credential and Access Management (FICAM) standards. Symmetry v8.0.2 allows the matching of a full 128 bit number stored on specific card types. This is particularly important for US Government customers and other customers moving to PIV-I and CIV credentials. The number comes in two forms: UUID and 128 bit FASC-N and is essential for GSA FICAM approval. Integration With Oncam Grandeye Evolution: The Symmetry v8.0.2 video management module now supports an integration with OnCam Grandeye’s Evolution 360 degree camera range. The Evolution camera continuously records an entire 360 degree area to provide total situational awareness, while allowing users to zoom into an area of interest. OnCam Grandeye’s OnVu 360 Mobile app is also available for iOS and Android mobile devices to monitor the Evolution 360-degree cameras in full HD and in the palm of your hand. Simplified Installation And Other Features: Symmetry v8.0.2 added features that will simplify the installation process and enhance the reliability of Symmetry Global, the software of choice for organizations spread over a number of geographically dispersed sites that run autonomously, yet benefit from centralised administration. Symmetry Global can now be used by mobile entities that may go out of range for a period of time and operate autonomously, and then return later for synchronization. Symmetry v8.0.2 supports the newly released Symmetry HD EN-7530HD Indoor Ultra Compact Dome IP camera and Symmetry EN-7567HD Indoor/ Outdoor IR Bullet IP camera. The complete Symmetry range of advanced network cameras provides full HD technology, H.264 video compression, and built-in advanced video analytics to meet any video surveillance need. When installed with the Symmetry SR controller range, Symmetry v8.0.2 supports the new Symmetry F2F reader family. The F2F card reader is compatible with new Symmetry systems and legacy access control systems supporting supervised F2F protocol. It supports a range of both proximity and smartcard technologies. Symmetry v8.0.2 added a merged access code feature to improve the way access permissions download to door controllers. Users can now add advanced rights to the standard rights, for example in situations where an employee needs access to a different part of a building on a temporary basis. Security administrators can now allocate card holders to card readers with time codes that overlapped each other, simplifying the installation process.
The Symmetry V8 software supports the new Symmetry EN-2DBC NetworkAccess Controller AMAG Technology, a market leader in integrated access control, IP video and intrusion, recently at ASIS International announces the release of its Symmetry V8 access control software. Symmetry™ V8 software answers the customer’s need for a complete end to end security management solution. The unified security solution offers integrators and end users a solution to manage all their security functions seamlessly in one system through an intuitive user interface. Symmetry is the lowest cost, most feature rich access control and integrated security management software on the market today. Packed with standard features that other manufacturers charge for, Symmetry offers visitor management, identity management and video management free in all Symmetry software versions. “Symmetry V8 allows end users to easily manage visitors through automatic disabling of visitor cards via a designated reader, manage vacation access and offers enhanced database security. These new features put the power in the user’s hands, giving them more control over their environment,” said AMAG Technology, Product Manager, Andy Goodwin. Symmetry V8 supports the new Symmetry EN-2DBC Network Access Controller. The flexible, PoE edge controller operates two doors and can use PoE to power the controller, card reader and door lock therefore reducing labor and costs for installations. The intelligent controller is IT friendly with network monitoring and is truly a scalable solution allowing the customer to expand their security system easily, anywhere they need it. The flexibility of the two door controller lowers cost, reduces labor and provides for easy system expansion. New Symmetry V8 software expands access control capability with added features for temporary card holders, automatic card expiration, vacation tracker and expanded card holder filters. These added features make managing card holder data and controlling access even easier. New Symmetry V8 now alsosupports the ONVIF Profile Scamera plug-in, the leadingglobal open standard for theinterface of IP-based physicalsecurity products Remote monitoring with SymmetryWEB allows users access to their security system anytime, anywhere. With new Symmetry V8 you can instantly access, monitor and review card holders, and manage visitors and alarms from any location through a web browser. Symmetry V8 offers a new and improved Network Video Recorder that provides standalone operation and stability, web browser set up, continuous or scheduled recording and integrations to leading third party Video Management Systems and NVR/DVRs. AMAG’s Symmetry Extended Business Solution program proudly supports integrations with Bosch Security Systems, Milestone, Salient Systems, Pelco, and Verint, to name a few. New Symmetry V8 now also supports the ONVIF Profile S camera plug-in, the leading global open standard for the interface of IP-based physical security products, greatly expanding the number of IP cameras that can be integrated with Symmetry. Extensive partner integrations allow customers open choice to the industry’s leading IP camera providers, such as: Axis, Bosch, Panasonic, Sony, Hikvision, and other ONVIF Profile S supported cameras including the complete line of Symmetry HD network cameras. “Symmetry V8’s video enhancements provide a base for which future VMS and ONVIF camera integrations will be further built upon in the form of plug-in extensions, enabling open integrations with all ONVIF cameras and more video management technology,” said AMAG Technology, Senior Product Manager-Video, Jim Murray. “AMAG will continue to listen to our customers and improve our software to meet access control and video demands.”
How To Ramp Up Perimeter Security With License Plate Reader TechnologyDownload
Solve Access Control Challenges in the Healthcare SectorDownload
Getting the Most Value From Software Subscription AgreementsDownload
Shifting Trends in Operation Centers and Control Rooms for 2021Download