Wavetrend Domino Tag W-TG100 Access control card/ tag/ fob

Technical Specification

Features:

Make: Wavetrend
Model code: Domino Tag W-TG100
Series: W-Series
Operating Temperature ^oC: -10 ~ +60
Dimensions mm: 64 x 30 x 9

Additional info:

An internal lithium battery powers the Wavetrend W-series of Active Tags. The Domino Tag will transmit a Radio Frequency (RF) signal at a pre-set time-interval. The Tag life is estimated at 5 years at a transmission time interval of approximately 1.5 seconds. Battery status can be inferred by interrogating the internal Tag Age Counter Value. The transmitted Tag data could include Customer Site Code (CSC), Tag ID, Tag Age Counter Value, Movement Alarm and Tamper Alarm status. For protection against adverse environmental conditions, Wavetrend Tags are encapsulated in a moulded plastic case, which is ultrasonically sealed during the manufacturing process. The Domino Tag is generally used for asset tagging. The mounting and affixing of a Tag depends on the type of application. The standard method is by VHB type double-sided adhesive tape.

Contact manufacturer Contact manufacturer Datasheet Datasheet

Make	Wavetrend
Manufacturer	Wavetrend Ltd
Category	Access Control>Access control cards/ tags/ fobs
Model code	Domino Tag W-TG100
Series	W-Series
Environmental Specifications	Operating Temperature ^oC: -10 ~ +60
Physical Specifications	Dimensions mm: 64 x 30 x 9
Accessories	RFID Asset Tags
Additional info	An internal lithium battery powers the Wavetrend W-series of Active Tags. The Domino Tag will transmit a Radio Frequency (RF) signal at a pre-set time-interval. The Tag life is estimated at 5 years at a transmission time interval of approximately 1.5 seconds. Battery status can be inferred by interrogating the internal Tag Age Counter Value. The transmitted Tag data could include Customer Site Code (CSC), Tag ID, Tag Age Counter Value, Movement Alarm and Tamper Alarm status. For protection against adverse environmental conditions, Wavetrend Tags are encapsulated in a moulded plastic case, which is ultrasonically sealed during the manufacturing process. The Domino Tag is generally used for asset tagging. The mounting and affixing of a Tag depends on the type of application. The standard method is by VHB type double-sided adhesive tape.
Download PDF version Download PDF version