Video Surveillance Cameras

Global and domestic threats have highlighted the need for tighter security across all verticals. One of the technologies that has redefined situational awareness and intrusion detection is thermal imaging. Once a technology exclusively manufactured for the military operations, thermal cameras today are deployed across hundreds of security applications and continue to see strong demand in existing and emerging commercial markets. With thermal technology, security personnel can see in complete darkness as well as in light fog, smoke and rain Technology Overview And Early Adoption What distinguishes thermal cameras from optical sensors is their ability to produce images based on infrared energy, or heat, rather than light. By measuring the heat signatures of all objects and capturing minute differences between them, thermal cameras produce clear, sharp video despite unfavorable environmental conditions. With thermal technology, security personnel can see in complete darkness as well as in light fog, smoke and rain. Originally a military developed, commercially qualified technology, the first thermal cameras for military and aircraft use appeared in the 1950s. By the 1960s, the technology had been declassified and the first thermal camera for commercial use was introduced. However, it wasn’t until the late 1990s - when FLIR Systems introduced a camera with an uncooled thermal detector - when the technology began to see substantial adoption beyond government defense deployments. Installations At Critical Infrastructure Sites In the 2000s, industrial companies were some of the first adopters of thermal, using the technology for predictive maintenance to monitor overheating and machine malfunctions. In the years following the September 11 terrorist attacks in 2001, there was an increase in thermal camera installations across critical infrastructure sites. Stricter security requirements drove the deployment of thermal cameras for perimeter protection, especially in the nuclear power sector. Thermal cameras produce clear video in daylight, low light or no light scenarios and their sharp images result in higher performing analytics In 2010, the U.S. Nuclear Regulatory Committee released its 73.55 policy, which states nuclear facilities must “provide continuous surveillance, observation and monitoring” as a means to enhance threat detection and deterrence efforts onsite. Because thermal cameras produce clear video in daylight, low light or no light scenarios and because their sharp images result in higher performing analytics, thermal cameras quickly became the preferred option for nuclear facilities. Likewise, following the 2013 sniper attack on PG&E Corporation’s Metcalf transmission substation, the Federal Energy Regulation Commission introduced the Critical Infrastructure Protection Standard 014 (CIP-014). The policy requires utilities to identify threats to mission critical assets and implement a security system to mitigate those risks. This statute also led to more thermal installations in the utility sector as thermal cameras’ long-range capabilities are ideal for detection of approaching targets beyond the fence line. The demand from both industrial and critical infrastructure entities, as well as other factors, helped drive volume production and price reduction for thermal, making the technology more accessible to the commercial security marketplace. Commercial Applications In recent years, the increasing affordability of thermal cameras along with the introduction of new thermal offerings has opened the door to new commercial applications for the technology. In the past, thermal cameras were designed for applications with enormous perimeters, where the camera needed to detect a human from 700 meters away. Locations like car dealerships, marinas and construction supply facilities can be protected by precise target detection, thermal analytic cameras providing an early warning to security personnel Today, there are thermal cameras specifically designed for short- to mid-range applications. Developed for small to medium enterprises, these thermal cameras ensure property size and security funds are no longer barriers to adoption. Lumber yards, recreation fields and sports arenas are some of the commercial applications now able to implement thermal cameras for 24-hour monitoring and intrusion detection. Affordable thermal cameras with onboard analytics have become attractive options for commercial businesses Innovation And Advancements Innovation and advancements in the core technology have also spurred growth in thermal camera deployment, providing faster image processing, higher resolution, greater video analytic capabilities and better camera performance. In particular, affordable thermal cameras with onboard analytics have become attractive options for commercial businesses that need outdoor, wide area protection. Car dealerships, marinas and construction supply locations all store valuable merchandise and materials outside. Without protection, these assets are vulnerable to vandalism and theft. However, by providing precise target detection, thermal analytic cameras provide an early warning to security personnel so that they can intervene before a crime is committed. By helping to deter just one incident, the thermal solution delivers a clear ROI. New Market Opportunities Not only are there more thermal cameras in use today than ever before, but there are also more thermal sensors being integrated with other multi-sensor systems, driving the adoption of thermal in new markets. For large perimeter surveillance applications, thermal is repeatedly being integrated with radar and drones to expand situational awareness beyond the point of fixed cameras. Users get immediate, accurate alerts of approaching targets and evidentiary class video for target assessment In the commercial market, thermal imagers are combined with optical sensors, analytics and LED illuminators into one solution that integrates with central monitoring station platforms. By bringing these technologies together, users get immediate, accurate alerts of approaching targets and evidentiary class video for target assessment. The result is a lower number of false positives, reducing the total cost of ownership for the solution. These multi-sensor solutions also feature two-way audio capabilities, which enable remote security officers to act as “virtual guards” and speak to intruders in real-time to dissuade them from illegal activity. The introduction of solutions that integrate all these state-of-the-art technologies under one unit reduces the amount of capital and infrastructure needed for deployment. Consequently, more small businesses and alarm monitoring companies can implement advanced perimeter security technologies like thermal sensors, some for the very first time. Thermal cameras have gone from military defense devices to widespread commercial security cameras Multi-Sensor Thermal Solutions Multi-sensor solutions featuring thermal are quickly gaining traction and opening the door to new business opportunities for the security channel. One of the primary reasons for the strong market interest in these systems is they enable integrators to increase their recurring monthly revenue (RMR). With intense price competition and eroding margins on CCTV equipment, integrators have to rely on RMR to grow their businesses. Offering remote video monitoring services and virtual guarding technologies is one of the best ways to do so.  Additionally, there is a clear demand for it. Central stations are continually looking for new technologies to offer their customers and businesses are interested in economical alternatives to physical guards. In conclusion, thermal cameras have gone from military defense devices to widespread commercial security cameras that are a substantial segment of the outdoor security protection market. From nuclear power plants to construction locations, thermal technology is being implemented to secure sites around the globe.

Surveillance systems can track the locations of cellphone users and spy on their calls, texts and data streams. The Washington Post has reported on such systems that are being turned against travelers around the world, according to security experts and U.S. officials. The summer season highlights the need to take extra precautions when traveling. When traveling anywhere in the world, for business or pleasure, citizens need to be aware of and alert to looming physical and cybersecurity threats. To elaborate on expert security tips, strategies and advice for traveling this summer, we presented several questions to The Chertoff Group, a global security advisory firm that enables clients to navigate changes in security risk, technology and policy. Chris Duvall, Senior Director at The Chertoff Group, offers insights into cybersecurity concerns, physical security precautions, and recommends digital resources/apps for consumers while traveling. Q: How are security risks – physical and digital – changing? Why are threats greater today than five years ago? The exponential number of headlines over the past few years is a strong indication that both physical and digital risks are evolving and increasing Duvall: The exponential number of headlines over the past few years is a strong indication that both physical and digital risks are evolving and increasing. The scope, severity and complexity of physical and cyber risks are increasing and becoming more dangerous and destructive. This is especially true for those traveling outside the U.S. On the physical side, threat actors are actively seeking “soft targets” – public events, social settings, mass audience venues, etc. – to communicate their message, sow chaos and inflict catastrophic harm. On the digital or cyber side, we have seen a shift from “thrill hacking,” to an increase of “hacking as a business” (through credential compromise and ransomware), to an increase in “hacking for harm” - with the rise of “nuke ware” and ransomware without a clear financial motivation. Q. What specific precautions should a traveler take to protect their calls, texts and data streams from being spied on? Duvall: When traveling abroad, we recommend to our clients that their personnel and executives should practice good internet and social media hygiene. Some best practices include: Avoid using public Wi-Fi services—unless you use private VPN service for encryption Increase the privacy setting on your technical devices Disable location identifiers on apps Create a new (unlinked) email for internet correspondence Consider purchasing international MyFi devices to decrease the risk of getting your personal identification information (PII) or protected healthcare information (PHI) stolen  Use temporary (i.e. burner) phones to protect your data and your contacts Q. What cybersecurity concerns are likely to impact travelers? Are the threats greater outside the United States or in any specific parts of the world? Significant precautions should be taken to protect personal electronic devices (PEDs) and the data connected to PEDs Duvall: The international cybersecurity landscape has grown increasingly dynamic, with threats posed by government authorities (in some countries), terrorists, insurgents, and criminals, requiring travelers to be proactive and vigilant. U.S. citizens, particularly executives of U.S.-based technology companies, must be aware that they are considered high-value targets for nation-state intelligence services and criminally-motivated bad actors. Many countries will go to great lengths and expense to acquire and exploit proprietary information from U.S.-based companies, and views U.S. executives visiting the country as “soft” targets of opportunity. As such, significant precautions should be taken to protect personal electronic devices (PEDs) and the data connected to PEDs. The tactics, techniques and procedures (TTPs) utilized by bad actors are often covert and nearly undetectable by the affected person. Threat actors routinely access, monitor and utilize Wi-Fi networks at hotels and in public spaces to compromise target devices. Other targeting methods include luggage searches, extensive questioning, and unnecessary inspection and downloading of information from personal electronic devices. There are numerous, high-risk countries for which the U.S. Government warns travelers to be wary of mobile malware, mobile device privacy attacks and hot spots for mobile botnets. The U.S. Department of State has the most recent and up-to-date list. For example, the U.S. Government has investigated numerous incidents in which U.S. travelers’ PEDs (personal and company devices) have been compromised by Russian authorities while transiting Russian airports, left unattended in public spaces and in travelers’ hotel rooms. When traveling to an unfamiliar place, research your destination to understand the local roads and transportation, geography, local roads, culture, etiquette and laws Q: What physical security precautions should a traveler take? Duvall: Here are some useful precautions: When traveling to an unfamiliar place, research your destination to understand the local roads and transportation, geography, local roads, culture, etiquette and laws. Protect your personal information and travel itinerary as much as possible. Limit the amount of jewelry worn, cash, credit cards and electronic devices carried while traveling. Avoid staying on the ground floor of a hotel. Consider choosing a room on the 2nd through 7th floors as these rooms may be more difficult to break into than those on the ground level, but still able to be accessed by fire/emergency response equipment. Never answer your hotel room door for anyone until you’ve determined who they are, why they are at your door, and if it is necessary for you to open the door to interact with them. Carry a rubber door stop/wedge with you to install on the room side of the door before you go to bed. Vary your patterns and routines when venturing out in to a new location, do not become predictable. Politely decline offers of food or drink from strangers (If you do accept beverages, ensure that they are in sealed containers and that there is no evidence of tampering). Never discuss your itinerary, personal, business or other sensitive information where others can hear you. Q: How can companies be proactive in protecting their business travelers? Companies should educate their employees on the importance of maintaining good internet hygiene while traveling abroad Duvall: When traveling on business, companies should provide their employees with clean computers and cell phones before departure. Upon return, the company should immediately wipe the computer clean to prevent any malicious threats from penetrating the company’s internal, cyber-infrastructure. Additionally, companies should educate their employees on the importance of maintaining good internet hygiene and recommend their employees disconnect from social media platforms while traveling abroad. Some general tips to recommend to your employees when traveling abroad include: Register in the Smart Traveler Enrollment Program (https://step.state.gov/step/) Visit Travel.State.Gov to view travel related information specific to the country or countries you’re visiting, including local US Embassy or Consulate contact information, as well as current travel advisories and alerts. Always leave a copy of your transportation and hotel itinerary and driver’s license (or passport if traveling internationally) with a family member or trusted friend. Always use a baggage tag with a protective cover Avoid using public Wi-Fi services Q: What digital resources and/or apps might a traveler benefit from (and how)? Duvall: The Chertoff Group recommends researching the below travel-related Apps before departing on a trip: TravWell: This app provides destination-specific vaccine recommendations, a checklist of what you need to do to prepare for travel, and a customizable healthy travel packing list. The app can store travel documents, keep records of medications and immunizations, and set reminders to get vaccine booster doses or take medicines. My TSA: This app provides real-time updates on airport delays. It includes how long security lines are at various airports; information about what you can and cannot bring onto an airplane; and a frequently-asked question list, including new advanced imaging technology. Border Wait Time: The app provides estimated wait times and open-lane status at land ports of entry, which may be particularly helpful when in an area with multiple crossings. Mobile Pass: The Mobile Passport app speeds you through U.S. Customs and Border Protection at (1) cruise port and (24) airports Q: As a security expert, what’s your best advice for travelers? Duvall: At the end of the day, travel security is not rocket science. Simply put, travelers need to: Be aware and situationally alert at all times. Be aware and situationally alert to the location of your luggage and carry-ons at all times. Don’t access unknown, unsecured or public Wi-Fi if at all possible. Turn off “auto connect” features and institute stringent privacy controls as much as possible. Try to “blend in” – you don’t have to try to look like a local but travelers should avoid gaudy and expensive attire wherever possible. Use your common sense – if an offer, invitation or opportunity seems to good to be true... it probably is.

As anyone who has ever flown on a commercial airline since 2001 knows, security measures at airports are well enforced and the emphasis on traveler safety is all around the airport and its grounds. Mass transportation, meanwhile, presents a special but not any less significant challenge when it comes to determining security issues. These facilities need to develop the means to protect a constantly changing and large population of passengers. And unlike airports these facilities often have hundreds of points of entry and exit on multiple modes—buses, subways, light rail, commuter trains, even ferries. About 2 million Americans will use the nation’s airways on a given work day, while 35 million people will board some form of public transportation. In fact, statistics have shown that nearly 11 billion trips are taken on public transportation every year. In some large metropolitan areas in North America where mass transit is well established, more than 20 percent of the area’s inhabitants get around via public transportation.About 2 million Americans will use the nation’s airways on a given work day, while 35 million people will board some form of public transportation Solving Mass Transit Security For transportation officials and their security providers, solving the mass transit security issue begins with determining the key concerns and then creating the proper responses via security systems, policies and procedures to mitigate the risks. Although vandalism and graffiti are very visible signs of criminal behaviour in mass transit settings such as bus stops and subway stations, this is not where transportation officials typically focus their energy. Fences and gates can secure out-of-service buses and train cars, as can remote surveillance methods to keep such vandalism at a minimum. Instead, it is the day-to-day safety and security of transit riders and employees that should become the highest priority. This begins with creating the safest environment possible that is highlighted with appropriate signage and, when necessary, audible warnings, and supporting that with technology, such as surveillance cameras, that will document what has happened if an incident occurs.Analytics can also be useful in alerting security about other suspicious behaviours at a transit stop, such as an untended bag or package Crime Prevention In Transportation Analytics can also be useful in alerting security about other suspicious behaviours at a transit stop, such as an untended bag or package Incidents of concern within a transit setting can take several forms, ranging from legitimate accidents or crimes to false claims such as faked fall down the stairs to potential and actual suicides. Bus and subway stations also have become magnets for homeless people who may put themselves and others in harm’s way by trying to access less secure public areas within a station as temporary shelters. If someone is injured on a subway platform and the transit provider is held liable, it could be on the hook for hundreds of thousands, if not millions of dollars. Suicides are a major concern for operators, with personnel now being trained to look for individuals who seem distressed, are loitering in the area or are intentionally putting themselves in a dangerous situation, such as standing too close to the edge of a platform. The deployment of video analytics, which can be programmed to send alerts when certain pre-set actions occur, can help determine when such dangerous behaviours come into play. Analytics can also be useful in alerting security about other suspicious behaviours at a transit stop, such as an untended bag or package or a person going into a restricted area. Whether it is on the bus, train or ferry or at the stops themselves, cameras and intuitive video management systems are the key to both active and forensic transit security. Some cities use buses that are up to 60 feet long and those can be equipped with up to a dozen cameras Train Security And Safety By using the proper cameras and recording systems in a transit environment, quick-acting personnel can locate a person of interest who boarded a train at one station, follow him during his trip and produce a crisp, clear identifiable image at the end. Those setting up the system thus should keep in mind proper camera positioning, resolution and motion-based changes to framerates or other compression settings. A typical 30-foot bus often has six cameras—one each at the front and middle doors, two more within the bus and then one looking forward and another looking behind the bus. The latter two are important in the event of accidents to verify liability. Some cities use buses that are up to 60 feet long and those can be equipped with up to a dozen cameras.Train stations often deploy high-definition cameras to better support facial recognition software to get that actionable image Train cars are similarly equipped with two to four cameras to view activity down the centre aisle. Within the stations themselves, there can be from 15 to 30 or more cameras capturing wide-angle shots. Train stations, which have a restricted point of egress, often deploy high-definition cameras to better support facial recognition software to get that actionable image. Installing The Right Technology For The Solution Although bandwidth and storage can be a concern, with motion-based recording, the resolution can be bumped up during event, resulting in a 1-megapixel stream jumping to 4 or even 8mbps when needed. By changing the resolution on demand, end users can cut their storage needs significantly. Transportation settings often rely on the same technology used in other security installations, primarily mini dome cameras, although there are some mini transit domes built specifically for the environment with the proper aesthetics. Because of vandalism threats, transit typically avoids pendant mounts, which can be more easily grabbed and damaged. Temperature ratings for cameras also come into play in cold climates with cameras often getting outdoor exposure.Today’s new buses and trains are constructed with the cameras onboard and newer stations also take security into consideration at the earliest design stage As trains and buses move along their routes, especially those that service outlying areas, Internet connectivity becomes an issue as well. Because it may be difficult for video to be sent in transit, security bus barns are equipped with Wi-Fi so video from onboard cameras can be downloaded at the end of the day. And the use of hardened recorders at the stations allows security personnel to retrieve recorded video. Transit Security With Modern Technology Today’s new buses and trains are constructed with the cameras onboard and newer stations also take security into consideration at the earliest design stage. Older infrastructure from long-standing subway and bus terminals can prove to be a challenge when adding security, but these issues aren’t insurmountable. Often the solution is to add more cameras to cover the same square footage because of less-than-ideal sight lines and to place conduit wherever it works best, which may mean positioning it under platforms or in other out-of-the-way places within older stations. Looking ahead, transit security will continue to evolve, not only as new stations and modes of transportation are added to the system, but in terms of communicating with commuters. People can expect to get mass notification alerts on their mobile devices, and those same devices can provide vital data to transportation entities to better develop their overall systems.