Panasonic WV-NP1004 Megapixel MPEG-4/JPEG Dual Streaming Network Camera

Technical Specification

Please note: this is a discontinued product.

Go to Replacement product

Features:

Make: Panasonic
Model code: WV-NP1004
Series: i-Pro Series
Chip Inch Size: 1/3
Color Type: Color / Monochrome

Additional info:

ABF (Auto Back Focus) ensures easy installation and stable focus in both color and B/W modes. Multiscreen images from 8 cameras can be displayed in 2 separate Quad screens (JPEG only). Alarm sources including Terminal input, VMD and Panasonic alarm command can trigger actions including SD memory recording/FTP image transfer, E-mail notification, Alarm indication, Terminal output and Panasonic protocol output. Other supported protocol: *DDNS, NTP, SNMP.

Contact manufacturer Contact manufacturer

Datasheet Datasheet

Make	Panasonic
Manufacturer	Panasonic Corporation of North America
Category	Video Surveillance>IP cameras
Model code	WV-NP1004
Chip Inch Size	1/3
Color Type	Color / Monochrome
Resolution	780
Specialist Type	Network
Sensitivity Lux	0.06
Electrical Specifications	Voltage: 24 V AC Power Consumption: 9.5 W
Lens Mount	CS
Motion Activated	Yes
Focal Length mm	2.8 ~ 6
Back Light Compensation	Yes
Auto Gain Control	Yes
White Balance	Yes
Electronic Shutter Range	1/25 ~ 1/10,000
S/ N (Signal/ Noise) Ratio dB	50
Synchronisation	Internal
Signal Mode	PAL, NTSC
Zoom	Yes
Y/ C (Video Output)	1 Vp-p, 75 Ohms
Compression Type	JPEG, MPEG4
Network Properties	Interface: 10Base-T/100Base-TX, RJ45 Network Protocols: TCP/IP, UDP/IP, HTTP, RTP, FTP, SMTP, DHCP, DNS, *
Physical Specifications	Weight g: 970 Dimensions mm: 84 x 83 x 197.5
Environmental Specifications	Operating Temperature ^oC: -10 ~ +50 Operating Humidity %: 0 ~ 90
System Requirements	Operating System: Windows 2000 Professional SP4, Windows XP Web Browser: Internet Explorer 7.0 and 6.0 Service Pack 1 and 2
Additional info	ABF (Auto Back Focus) ensures easy installation and stable focus in both color and B/W modes. Multiscreen images from 8 cameras can be displayed in 2 separate Quad screens (JPEG only). Alarm sources including Terminal input, VMD and Panasonic alarm command can trigger actions including SD memory recording/FTP image transfer, E-mail notification, Alarm indication, Terminal output and Panasonic protocol output. Other supported protocol: *DDNS, NTP, SNMP.
Download PDF version Download PDF version