Download PDF version Contact company

Minneapolis Airport proves that slow and steady acquisition wins the technology race with Vicon’s expandable video systems. For the Minneapolis/St. Paul International Airport, simply wanting a better camera system wasn’t enough. They wanted a system they could build on, over an extended period of time, without replacing the existing infrastructure. They found that system in the Vicon family of video products, and a relationship that began almost 10 years ago is still going strong.

Building A Better Airport

As part of an ongoing airport improvement project in the early 1990s, Minneapolis/St. Paul (MSP) embarked on a video expansion program that began with 16 cameras and has grown to more than 800 cameras today.

To do this, they called on a Minnesota security system integrator, Pro-Tec Design. “We were asked if we could provide services on their existing system of 16 cameras,” recalls Tom Hagen, president of Pro-Tec Design. “The desired goal was to expand the camera security system throughout the airport facility into multiple buildings located at multiple locations throughout the 3300 acre site. They wanted to be able to expand camera security into those locations, yet have the ability to view any camera from multiple monitoring areas, regardless of where the camera was located.”

“Another key requirement was to design and install a system that would permit quite a bit of expansion over time, with some assurance that each phase of expansion would build upon and preserve the investments made previously.”

The airport had put together a team, consisting of representatives from the primary architectural firm, electrical engineering, airport police, airport facility development and an electrical contracting firm.

Minneapolis/St. Paul International Airport

“We were offered the opportunity to bring in our recommendations,” Hagen says. One of the performance tests was to set up live cameras to view outdoor activity at dusk. “We tested several different cameras. The selection team was viewing the camera pictures on a monitor inside one of the concourses. One particular camera produced an outstanding picture in the low-light conditions. The monitor view appeared to be from an earlier time of the day during normal daytime conditions. It was one of the Vicon cameras.”

That was one reason they selected Vicon, Hagen recalls. Another was the design of the system using a concept of distributed architecture, which at the time was quite unique. This design allowed airport personnel to accomplish one of their main goals, which was to be able to view a camera from any viewing location, even if the camera was on the opposite side of the airport.

Another benefit was the ability to assign priorities or “seize levels” to each camera. “If we have one controller that is a higher priority, they would automatically take control of the camera over someone else who may be using it at the time,” explains Tom Germundson, Security Consultant for the airport.

The design allowed airport personnel to accomplish one of their main goals, which was to be able to view a camera from any viewing location

Expanding The System

Once the initial Vicon system was in place, the airport gradually added on, upgraded and incorporated new technologies as their needs changed.

One prime example of evolving technology was the migration from analog VCRs to digital video recorders (DVRs).

“Originally the recording was done on VCRs connected to 16-channel multiplexers,” Hagen says. “Now that has all been migrated into a distributed, networked architecture of digital video recorders, using ViconNet software to view live and recorded video from cameras located throughout the facility. That has been a very important and useful improvement for people who use the system. It replaced a method of finding recorded video that was so cumbersome. The new system is much, much easier to use.”

Beginning about two years ago, the airport migrated from the old VCRs to Vicon’s newest DVR technology, the Kollector. “The move to DVRs was the airport’s most recent, significant upgrade,” Germundson says. “We waited for the newest Kollector so we could gain that technology,” he says.

What they gained by waiting for the technology that best fits their needs was the ability to have truly user-friendly documentation and the ability to quickly access the video information they need.

“We’ve had incidents where oversized vehicles have entered the parking garage and knocked the video out of the ceiling,” Germundson says. “We can now locate that vehicle, and when the person comes back, they get a notice that they owe X amount for damages. Finding and using video evidence on VCRs is difficult. You can’t share information as easily. It’s a lot more cumbersome. It’s not usually worth the time, so people would avoid doing it.”

The System In Use

The system today features 800 plus fixed or pan-tilt-zoom cameras. Live and recorded video is available on a network of fifty-four (54) DVRs where camera views can be pulled up by authorized personnel, in a prioritized manner.

"We can now locate that vehicle,
and when the person comes
back, they get a notice that they
owe X amount for damages"

All these components work together to make up a cohesive system that meets the unique needs of MSP Airport. In 2003, the airport served 33.2 million passengers making them the 7th busiest airport in the world. In the same year, J.D. Powers & Associates rated MSP as the third best airport in the world.

“If we are looking for an individual, we can quickly gain access to the video information,” Germundson says. “We also have a graphical user interface. We can easily find the right camera to use if an individual went down a specific concourse. We can see an incident to determine what happened. If there is damage to property, we can locate the video and see what caused it.”

Plans To Continue System Expansion

Of course, no system is perfect, and almost no installation goes off without a hitch. Over the years, there have been desired improvements, some of which could only be remedied as technology itself advanced. The Kollectors are a prime example.

The original DVRs had a 440 Gigabyte hard drive. “The ones we had originally had too little storage for our needs,” Germundson says. “They did not give us enough recording time. We weren’t really able to fix it except as time moved on and Vicon provided larger storage capacities.” The current DVRs contain a 1.2 Terabyte hard drive.

Going forward, MSP has plans to continue the expansion of their system. “We are possibly looking at things like perimeter detection, maybe incorporating software-enhanced video, which we could set up so if a person crossed a certain location in a certain direction, it would trigger an alarm,” Germundson says. They are also talking to Vicon about adding additional storage capacity to some of the older Kollector Elites they have.

“The Minneapolis-St. Paul International Airport has had the benefit of a powerful camera security system that has incorporated new innovations as they have become available as a result of progressive efforts by many people over time,” Hagen says. “There is a team of people involved that have had the vision to stay ahead of the curve. That is what it takes.”

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version Download PDF version

In case you missed it

Perimeter Security Today: Protecting People And Assets
Perimeter Security Today: Protecting People And Assets

Perimeter security is by no means a new concept. A phrase used to describe solutions with the primary purpose of limiting access to any area that is prohibited to the public at large, perimeter security has been prevalent for millennia. From Hadrian’s Wall that was built by the Roman Empire in Britain back in AD 122 to the Great Wall of China that winds almost 22,000 kilometers through the Asian country’s eastern regions, it is a concept that remains a fundamental part of global societies today. Fast forward to today and no longer are we reliant on 50-foot-high, 20-foot-thick stone blockades to protect our safety. Perimeter security has evolved over the centuries moving from empires and structures to products and cutting-edge technology and continues to grow today. In fact, in 2020 Perimeter Security was a $61.3 billion industry as more businesses and industries have the need to protect against modern-day threats. This colossal and growing market is powered by industry innovators that are providing advanced solutions that are reliable, integrated, and cost-effective. Layered Perimeter Security Defense The number of perimeter intrusions is a large reason behind the continued surge in security investment, propelled by increasing urbanization, a growing terror threat, and a plethora of other concerning factors. Most organizations are better equipped to protect people and assets today, yet there is still a need for solutions that can grow with our future needs and the unforeseen challenges ahead. For many, this means moving beyond siloed solutions into a multi-layered, integrated physical security strategy – one that provides the best security posture possible. There are a variety of innovative technologies that can create a holistic perimeter security solution that will transform the defences of any organization. The question is, what are the technologies and trends shaping perimeter security in 2021 and beyond? Next-Generation Video Surveillance By combining two powerful visualization technologies in a single form factor, rich data can be captured and deliver more accurate awareness and better application of deterrence measures in real-time, versus the evidentiary use of cameras today. In today’s surveillance market, cameras and video management systems are nothing like those that were available a mere half-decade ago. Cameras now readily feature ultra-HD and 4K resolution that provide an extremely high level of detail, enhancing security teams’ ability to capture evidence and identify perpetrators. This enhanced detail bolsters not only investigation sequences but equally transforms video analytics capabilities, like facial recognition that unlock additional business benefits. Where are cameras heading in the future? Let’s look at Oyla’s cameras as an example. These cameras fuse together artificial intelligence (AI), video, and 3D data, offering a depth camera that can be used to define very accurate intrusion detection perimeters. Its advanced motion detection activates an alert when a user-defined perimeter has been crossed, or if there is a presence in a user-defined area or volume space. By combining two powerful visualization technologies in a single form factor, rich data can be captured and deliver more accurate awareness and better application of deterrence measures in real-time, versus the evidentiary use of cameras today. Thermal Cameras Thermal cameras are a relatively novel yet growing security phenomenon, having come to the forefront during the pandemic. Where such technology was once a novelty, their widespread application in detecting raised temperatures which might indicate a COVID-19-related fever has seen them become increasingly applied to a broader market in the past 18 months. Not only are these cameras now more accessible, but they have also advanced from a technical perspective. Modern thermal cameras now offer a more accurate thermal resolution, longer detection ranges, ONVIF compliance and edge-based analytics for the benefit of VMS solutions. They are also a useful technology for solving visibility challenges in complete darkness. Radar Radar is a technology that’s increasingly being used in physical perimeter security applications. Capable of conducting 360-degree scans of a property on a continual basis every couple of seconds, it is an extremely powerful intrusion detection technology. Radars stand up better than other technologies in difficult conditions such as smoke and fog. When paired with other sensors, false alarms can also be reduced in these conditions – something that is a major challenge more broadly. While law enforcement responds to millions of security alarms every year, a study from the United States Department of Justice's Office of Community Oriented Policing Services previously showed that between 94 and 98 percent of these turn out to be false, costing as much as $1.8 billion a year in wasted police time and resources. LiDAR What is LiDAR? LiDAR has been around since the 1960s, with one of LiDAR’s first use cases was being attached to aircraft to emit laser light towards the surface of the earth to provide distance readings. Spurred by its necessity for the coming autonomous driving revolution, today, the application of LiDAR technology has become more widespread. According to research by Fortune Business Insights, the size of the global LiDAR market is set to surpass $6.7 billion by 2026, a monumental increase on the $1.32 billion spent on LiDAR in 2018. In the security space, LiDAR technology is already proving it carries a string of benefits and upgrades on what is currently available on the video surveillance market. The major upside of LiDAR is that like video, it brings a high level of detail to a physical environment that other sensors simply cannot provide. Pairing Lidar with video, machine learning, AI, and other advanced sensor technologies can help validate alarm accuracy. Indeed, it is technologies such as these, designed to reduce the burden of security personnel by conducting the heavy lifting in alarm validation, that we can expect to become increasingly prevalent soon. Drones It is technologies such as these, designed to reduce the burden of security personnel by conducting the heavy lifting in alarm validation Often referred to as unmanned aerial vehicles (UAVs), drones are another technology that is becoming both more accessible and more capable from a security perspective. In sizable areas of land or hard-to-reach critical infrastructure sites, drones can be dispatched instead of security personnel as a means of first response to an intrusion alert. They can also work in tandem with thermal imaging, radar, lidar, and next-generation video surveillance technologies, either incorporating them onboard directly or supporting them in wider, integrated security infrastructures. Developing the Right Multi-Layered Perimeter Security Strategy These are just a handful of some of the more progressive perimeter security-centric technologies on the market today. The challenge for many organizations is knowing which solutions will suit their needs and address the challenges of tomorrow. Take the time to understand what you need to protect. Is it people, data, or assets? Where do you feel your potential vulnerabilities may lie? By assessing your risks, you will better understand potential target areas and address them accordingly. For perimeter security, a multi-layered solution will likely be the most secure approach. From basic needs to the more advanced, there are a broad variety of possible solutions available. Yet taking the time to understand which solutions are the most successful, cost-effective, and relevant to your business will yield the best results.

What Are The Latest Trends In Perimeter Security Technology?
What Are The Latest Trends In Perimeter Security Technology?

Perimeter security is the first line of defense against intruders entering a business or premises. Traditionally associated with low-tech options such as fencing, the field of perimeter security has expanded in recent years and now encompasses a range of high-tech options. We asked this week’s Expert Panel Roundtable: What are the latest trends in perimeter security technology?

Why Access Control Is Important
Why Access Control Is Important

When we talk about security, people are often quick to jump to conclusions and picture bouncers, heavy steel doors and alarms that go off as soon as a door is opened. Access control is in fact one of the most common and least invasive methods of adding extra security to a home, communal or business premises – controlling who is able to enter a space based on the use of entry codes, key fobs, and/or access cards. Communal flats and office blocks are where access control is often an important factor in keeping the building secure, though private residences also have their own lowkey methods of access control with burglar alarms and personalized codes. With that said, what is it that makes access codes so effective across so many spaces – and why are they so important in today’s society? Benefits of access control Every time you visit an office space, enter a block of flats, or drive into a gated community, you will likely be faced with restricted access and a code pad – plus a button to ring through if you are a visitor. This is a prime example of access control, whereby the owner of the premises has installed a gate or security door which requires a code to enter from the outside. Pressing the request button puts you through to a controller who can then either grant access or deny access. The primary benefit of access control is that it ensures that a space remains secure Some of these code pads have cameras so that the controller can see the visitor – some just have a microphone and speaker. The primary benefit of access control is that it ensures that a space remains secure – only visited by those who are granted access. This restriction helps to keep residents and property safe, not only deterring burglars but ensuring that they are unable to gain entry without permission. Access control panels Some of the examples of access control panels in use include: Private car parks, granting access to employees or residents or paying guests based on the location. Communal buildings and flat entranceways, granting access to residents. These kinds of access control panels will have multiple buttons, one for each flat so that guests can buzz and speak to their contacts. Offices, granting access to employees and their guests. Another key benefit of access control is that entry and exit data can be tracked Another key benefit of access control is that entry and exit data can be tracked, and data can be used for anything from tracking the use of a building, to understanding and logging when individuals have entered and left the premises. For those who have ever watched a Detective drama, you will know how crucial this kind of data can be to determining alibis! Replacing lost keys Inhouse, this can also be useful in identifying who is around when an incident occurs, and in ascertaining how many people are in the premises in the event of a fire or emergency situation. On top of knowing when individuals are accessing certain spaces, access controls can also be used to restrict access to spaces during certain time periods – for example at the end of a shift, or overnight. This is most often found in commercial spaces and car parks, as private residences will grant access at all hours to residents. Access control plays an important role in security and can impact everything from your insurance bills and insurance cover to the amount you spend on replacing lost keys. By keeping certain spaces restricted, only granting access to those who are supposed to be there for work or through their private residence, you are able to keep individuals safe and protect them from the effect of theft. Preventing unlawful access Access control is particularly crucial in tracking the movement of employees should an incident occur In a workspace, access control is particularly crucial in tracking the movement of employees should an incident occur, as well as making the life of your team much easier in allowing them to move between spaces without security personnel and site managers present. It can also reduce the outgoings of a business by reducing the need for security individuals to be hired and paid to remain on site. For a private homeowner or flat owner, access control is what grants you the privacy and security that you deserve in your own space. Whether the control is placed on the outside of a bin store, car parks, communal entrance way or your own personal flat, creating barriers to prevent unlawful access can make a private residence more appealing to tenants or homeowners, and can also provide information and data about who has entered a building and when. Vacant property security The value of access control is that there are a range of solutions according to your budget, your requirements, and the way that you intend to use access control across your site or inside space. For the most part, access control is considered to be a cost effective way of increasing security, cutting back on personnel while ensuring that access is only granted to those who are supposed to be a specific space. The value of access control is that there are a range of solutions according to your budget According to construction site and vacant property security company Sicuro, access control systems with a built in camera are becoming increasingly popular, particularly on the exterior of a building when it comes to granting access to visitors – as those inside can see who is asking to be let in. Managing access control Meanwhile, across inside workspaces and sites, access control managed by pin numbers or fingerprints is often sufficient. Access control is an important part of modern security, ensuring that everywhere from office spaces to private residences are protected from unwanted or unlawful visitors. For the most part, access control is managed automatically, tracking and storing data on who has entered and exited a specific space and at what time – though some examples are tracked and managed manually (for example in a school reception or private residence).