Adams Rite Electronic Keypads for Access Control Systems  (1)

In daily work and life, various locks have always played the role of protecting asset safety. In different usage scenarios, the most appropriate lock must be selected to maximize benefits. In the past applications, the difficulties encountered by managers are as follows. Unlocking authority is difficult to control, unclear access records, emergency unlocking, and troublesome upgrade and installation. Through the following points, how the key-centric access management system solves such problems. Access management system The key-centric access management system, also known as intelligent passive electronic lock system, which is based on three elements: electronic keys, electronic cylinders and management software, can provide powerful and traceable access control. Each smart key is unique and cannot be copied, and in the event of loss or theft, these keys can be quickly disabled. Each smart key is unique and cannot be copied, and in the event of loss or theft, these keys can be disabledIn the process of using traditional mechanical locks, it is not difficult to find that it is quite complex to realize the access control of unlocking. The difficulty is that the keys can be copied at will, the use records are not clear, and the credibility of employees cannot be guaranteed... etc. For managers, this is a safety issue that cannot be ignored. Mechanical lock system And through the key-centric access management system, we can accurately assign access authority for each user, and set different access authority for locks in different areas. For example, we can set the XX user to have access to the archive room (A) from 10:00 on May 1, 2021 to 17:00 on June 1, 2021, within this time range. Outside this time range, there will be no unlock authority. The flexibility of the traditional mechanical lock system is insufficient. There is no clear record to determine who entered the area. It is usually a simple paper record that records the unlocking records of the employees. The authenticity and validity of the system need to be examined. In the key-centric access management system, when an employee unlocks the lock, the unlock record will be synchronized to the management terminal. Remote authorized unlocking With the key-centric access management system, remote authorized unlocking can be realized Through secondary records, managers can easily track employees and supervise employees' visits to each area. In daily work, there are often emergencies that require temporary visits to certain specific areas. If you encounter a situation where the distance is extremely long, and you don’t have the key to that area, you can imagine how bad this is. The process of fetching the keys back and forth is time-consuming and laborious. With the key-centric access management system, remote authorized unlocking can be realized. You can apply for the unlocking authority through the mobile APP, or you can temporarily issue the unlocking authority for the area on the management terminal, which saves time and effort. When faced with the failure of ordinary mechanical locks to meet management needs, some managers can already think of upgrading their management system, that is, the intelligent access control system. Passive electronic locks But before making this decision, the manager will inevitably consider the various costs brought about by the upgrade, including installation costs (cable cost), learning costs, and maintenance costs. Since most of the universal intelligent access control systems on the market require wiring and power supply, the cost of transformation and upgrading is quite high for managers who have such a huge amount of engineering. The key-centric access management system is the ‘gospel’ for managers. Since passive electronic locks and ordinary mechanical locks have the same size, they can be directly retrofitted to existing hardware, and they can be replaced step by step simply and easily. At present, the key-centric access management system is being known and applied by more and more managers and enterprises. Application industries include, such as power utilities, water utilities, public security, telecommunication industry, transportation, etc.

The experience of the COVID-19 pandemic has made us all more conscious of who is coming and going from our property. Whether it is a family home, business premises or public building, property owners want full control over access for protection and peace of mind. As a provider of access control technologies, we are seeing a growing demand for automated gates with a variety of access control systems. There are a number of considerations that buyers need to make when investing. And as an installer, there is advice that you can offer to help your clients make the right choice for their property. Here are some of the key considerations you’ll need to make and discuss with your client. Whomever you buy from, you should be offered more than a simple instruction manual. Electronic locks, magnetic locks and code security In the first instance, you’ll need to advise on the type of lock and access control available. Electronic locks release on the operation of the automation system to allow the gates to open. Locks are required for all non-locking (also known as reversible) operators and are recommended for any gate on a multi-user site or any gate over 2.5m. Apply the same logic to an automated gate as you would to a domestic door – for example, you wouldn’t fit your front door with a lock on the same side as the hinges or a drop bolt at the hinge end of a manual gate so why dispense with this logic when the gate is automated? Electronic locks release on the operation of the automation system to allow the gates to open There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks. These are all designed for external use. While the gate itself will provide physical security, the customer will want to feel in control of who enters their property, when and for what purpose. Consider access for mail and deliveries, waste disposal and visitors arriving on foot etc. There is a range of options available. Intercom systems will allow the user to vet visitors, keypad entry can allow remote access for visitors with a specific code, remote controls allow an oncoming driver to open the gates without getting out of the vehicle, and a timer control can be used to open or close the gates at certain times of the day. Vehicle detection loops can be installed discreetly under the tarmac allowing the presence of vehicles to exit the gates and prevent closing while obstructed. Sliding gates versus swinging gates There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks Gates can be automated to either swing or to slide open and in the case of swinging gates, the opener may be concealed underground or gate mounted. The most suitable opener for your installation will depend on the space available and the type of gate selected. Concealed underground automation is ideal for highly ornate gates. However, where gates are fully infilled (typical of many timber designs), gate mounted openers are concealed from the front of the gate by the gate leaf and present a cost-effective option. The choice between slide and swing is largely down to space - swing gates require a clear space for their opening arc while sliding gates require space to one or both sides of the gate. Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited, as they use the least space when opening. Voltage Most swing gate and sliding systems are available in 24v or 230v. The 24v systems still need 230v mains power – there is a transformer built into the 24v control panels. Deciding which voltage to use can include a combination of factors such as the material of the gates, the location of the system and the safety features you want. Concealed underground automation is ideal for highly ornate gates With wrought iron gates, the wind can pass through them whereas with fully boarded wooden gates (popular because they give full privacy) the wind has nowhere to go, so they act like sails. For commercial or industrial applications with larger entrances and a heavy gate, you may need 3 Phase 400v power (sliding gates only). Installing gate motors in confined spaces The environment in which you are fitting may well influence which gate and motor you recommend. Will it be in an exposed area which is subject to the elements? Will it be positioned on a slope? Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited Installers have always faced the challenge of installing gate motors in confined spaces. When fitting a pedestrian gate, there is often limited space in which to work – potentially making an installation time consuming and technically demanding. If this is the case for you, consider a gate operator which is designed specifically for installations with limited space for maneuver. An example of this is the E5 compact gate operator. The operator is not only small but has an optional slide lever attachment designed for installations where there is extremely limited space, meaning that just 8cm of the pillar is needed for installation. What’s more, improved fixing points and a simple ‘hook and fasten’ process means assembly is safe, quick and straight forward. Ultimately, you’ll be looking for a good quality, reliable product with good service. Work with a supplier that offers more than just a manual. If they are happy to offer training, their time and advice when you buy, the chances are you’ll get their support long term.

The safeguarding of premises through the monitoring of entrance and exit points has traditionally been a very manual aspect of security. Human operators have been relied on to make decisions about who to admit and deny based on levels of authorization and the appropriate credentials. The access control business, like many industries before it, is undergoing its own digital transformation But the access control business, like many industries before it, is undergoing its own digital transformation; one where the protection of premises, assets and people is increasingly delivered by interconnected systems utilising IoT devices and cloud infrastructure to offer greater levels of security and protection. Modern access control solutions range from simple card readers to two factor authentication systems using video surveillance as a secondary means of identification, right through to complex networks of thermal cameras, audio speakers and sensors. These systems, connected through the cloud, can be customized and scaled to meet the precise requirements of today’s customer. And it’s the ease of cloud integration, combined with open technologies and platforms that is encouraging increasing collaboration and exciting developments while rendering legacy systems largely unfit for purpose. Remote management and advanced diagnostics Cloud technology and IoT connectivity means remote management and advanced diagnostics form an integral part of every security solution.Cloud technology and IoT connectivity means remote management and advanced diagnostics form an integral part of every security solution. For example, as the world faces an unprecedented challenge and the COVID-19 pandemic continues to cause disruption, the ability to monitor and manage access to sites remotely is a welcome advantage for security teams who might otherwise have to check premises in person and risk breaking social distancing regulations. The benefits of not physically having to be on site extend to the locations within which these technologies can be utilised. As an example, within a critical infrastructure energy project, access can be granted remotely for maintenance on hard to reach locations. Advanced diagnostics can also play a part in such a scenario. When access control is integrated with video surveillance and IP audio, real-time monitoring of access points can identify possible trespassers with automated audio messages used to deter illegal access and making any dangers clear. And with video surveillance in the mix, high quality footage can be provided to authorities with real-time evidence of a crime in progress. Comprehensive protection in retail The use of connected technologies for advanced protection extends to many forward-looking applications. Within the retail industry, autonomous, cashier-less stores are already growing in popularity. Customers are able to use mobile technology to self-scan their chosen products and make payments, all from using a dedicated app. From an access control and security perspective, connected doors can be controlled to protect staff and monitor shopper movement. Remote management includes tasks such as rolling out firmware updates or restarting door controllers, with push notifications sent immediately to security personnel in the event of a breach or a door left open. Remote monitoring access control in storage In the storage facility space, this too can now be entirely run through the cloud with remote monitoring of access control and surveillance providing a secure and streamlined service. There is much to gain from automating the customer journey, where storage lockers are selected online and, following payment, customers are granted access. Through an app the customer can share their access with others, check event logs, and activate notifications. With traditional padlocks the sharing of access is not as practical, and it’s not easy for managers to keep a record of storage locker access. Online doors and locks enable monitoring capabilities and heightened security for both operators and customers. The elimination of manual tasks, in both scenarios, represents cost savings. When doors are connected to the cloud, their geographical location is rendered largely irrelevant. Online doors and locks enable monitoring capabilities and heightened security for both operators and customers They become IoT devices which are fully integrated and remotely programmable from anywhere, at any time. This creates a powerful advantage for the managers of these environments, making it possible to report on the status of a whole chain of stores, or to monitor access to numerous storage facilities, using the intelligence that the technology provides from the data it collects. Open platforms powers continuous innovation All of these examples rely on open technology to make it possible, allowing developers and technology providers to avoid the pitfalls that come with the use of proprietary systems. The limitations of such systems have meant that the ideas, designs and concepts of the few have stifled the creativity and potential of the many, holding back innovation and letting the solutions become tired and their application predictable. Proprietary systems have meant that solution providers have been unable to meet their customers’ requirements until the latest upgrade becomes available or a new solution is rolled out. This use of open technology enables a system that allows for collaboration, the sharing of ideas and for the creation of partnerships to produce ground-breaking new applications of technology. Open systems demonstrate a confidence in a vendor’s own solutions and a willingness to share and encourage others to innovate and to facilitate joint learning. An example of the dynamic use of open technology is Axis’ physical access control hardware, which enables partners to develop their own cloud-based software for control and analysis of access points, all the while building and expanding on Axis’ technology platform. Modern access control solutions range from simple card readers to two factor authentication systems using video surveillance as a secondary means of identification Opportunities for growth Open hardware, systems and platforms create opportunities for smaller and younger companies to participate and compete, giving them a good starting point, and some leverage within the industry when building and improving upon existing, proven technologies. This is important for the evolution and continual relevance of the physical security industry in a digitally enabled world. Through increased collaboration across technology platforms, and utilising the full range of possibilities afforded by the cloud environment, the manufacturers, vendors and installers of today’s IP enabled access control systems can continue to create smart solutions to meet the ever-changing demands and requirements of their customers across industry.

With the ever-changing post coronavirus (COVID-19) world, the ability to communicate virtually has never been more important. This is why ASSA ABLOY Opening Solutions UK & Ireland is improving its customer experience with the launch of the ASSA ABLOY Customer Support app. ASSA ABLOY Customer Support app Free to download on Apple and Android mobile devices, the app enables customers to quickly and conveniently contact the right customer service team within ASSA ABLOY in the UK. The app provides customers with remote technical product support via live streaming, alongside instant access to useful product resources. Its Door Hardware Group division will be the first to go live on the new app, enabling customers to contact all its renowned brands from one place. This includes UNION, ASSA, Dale Hardware, Excel Architectural Hardware, Exidor, Trimec, Adams Rite, and Securitron. Remote diagnosis and issue resolution Once downloaded, customers can use the app to directly contact the right department via phone, email or the new live chat and video call features. Additionally, they can find a direct link to the technical support team, who can offer remote diagnosis and issue resolution using the new live stream contact option. With COVID-19 restrictions in place, getting out to site and supporting has been a challenge. However, the app helps overcome this with its live video stream option, which allows issues to be resolved fast and effectively. Navigating ASSA ABLOY products To help customers navigate ASSA ABLOY’s broad range of products, the company has created a resource center that provides customers with direct access to technical product information and certifications, all in one place, at the touch of button. Support hours are shown within the app, depending on device location, and email options are offered if out-of-hours support is required. Customers can also take a photo using their phone and attach it to emails for easier troubleshooting. Remote contact and support Enabling remote contact is vital in providing our customers with quick and effective information" Jesse James, Financial and Commercial Director of the ASSA ABLOY Door Hardware Group, said “Improving our customers’ experience is paramount to our business, especially in these challenging times. Enabling remote contact is vital in providing our customers with quick and effective information, and has improved our customer experience through the launch of our app.” Jesse adds, “We continue to be committed to providing easier and more flexible ways to contact our business, receive technical product support, and for our customers to locate resources.” Easy-to-use and intuitive app Jesse further stated, "The new app is easy-to-use and intuitive, ensuring our customers have access to fast responses in real-time. Having the flexibility to choose how to contact our customer service teams, and for us to be able to quickly support customers on site with technical support is vitally important. The ASSA ABLOY Customer Support app allows customers to have everything they need in one place, and wherever they go.”

ASSA ABLOY Opening Solutions Americas introduced its Safer2Open™ suite of hands-free solutions. Available across a variety of products, both mechanical and electromechanical, these solutions can reduce touchpoints without compromising functionality in a range of facilities, including healthcare, education, office buildings, and other high traffic spaces where decreasing the spread of germs is essential to public safety. “As the economy begins to reopen, there’s a surging need and demand for facilities to employ new approaches that enable healthier environments. From low-touch to completely touchless automated openings, ASSA ABLOY’s Safer2Open solutions include a range of cost-effective and low- to high-tech options for a myriad of facilities’ doors, from entrance to exit,” said Mark Duato, Executive Vice President, Aftermarket at ASSA ABLOY Opening Solutions Americas. Post-COVID Technology and the New Normal Many state and local COVID-19 protocols recommend reducing the number of touchpoints in a facility, along with additional cleaning and sanitising protocols. Safer2Open products offer quick-to-implement solutions that can withstand rigorous cleaning cycles to align with these recommendations and improve facility safety as organizations adapt to this new normal. ASSA ABLOY’s Safer2Open solutions include – Low-Touch Solutions Trim options, such as SARGENT ALP Push/Pull Trim, Corbin Russwin HPSK Paddle Trim and Adams Rite Push/Pull Paddle Trim, are low-touch solutions that allow doors to be opened with minimal contact and can be added to virtually any opening to enable hands-free operation. Rockwood Hands-Free Arm and Foot Pulls allow access and egress without grasping hardware. These cost-effective options for hands-free door operation can be implemented in new and pre-existing aluminum, metal or wood openings. Sargent Electrified Closer-Holders keep doors open during high traffic times to minimize contact on door handles. Exit devices with Motorized and Electric Latch Retraction, such as Adams Rite 8000 and 3000 Series, Corbin Russwin ED5000 Series, SARGENT 80 Series Exit Device with Electric Latch Retraction and Yale 7000 Series, enable remote lock/unlock of a door, making it easier for people to move quickly and hands-free through virtually any opening. No-Touch, Fully Automated Solutions Low energy door operators from Norton are compatible with wave-to-open switches to offer an easy, contact-free method of opening doors. Wave-to-Open Switches, from Securitron and Alarm Controls, can pick up hand gestures within four inches of the switch to trigger operation for swing doors. Exit Motion Sensors, from Securitron and Alarm Controls, are egress options that minimizes contact in high traffic areas. HES Electric Strikes enable remote locking and unlocking of an automated door and are available for all frame types and applications, including low profile, outdoor rated, aluminum and glass. These types of hands-free solutions are essential to public health and safety, enabling facilities to quickly implement solutions now, with existing infrastructure, while setting up their space to meet today’s increased hygienic standards.

ASSA ABLOY Electronic Security Hardware and ASSA ABLOY Group brand Adams Rite announces the release of the HES 9800 and Adams Rite 7800 Electric Strike. The HES 9800/Adams Rite 7800 Series is a low-profile, surface mounted electric strike designed specifically to work with the Adams Rite 8800 & 8700 Series Narrow Stile Rim Exit Devices and the EX88 Interlocking Rim Exit Device. As the only electric strike compatible with the unique Adams Rite Starwheel and Interlocking latching mechanism, the new HES 9800/Adams Rite 7800 easily electrifies openings on aluminum storefronts, commercial perimeter doors and high-occupancy commercial facilities, and provides an electrification option for the Adams Rite EX88. Dedicated Power Supply “As one product offered by both legacy brands, the HES 9800/Adams Rite 7800 Electric Strike extends ASSA ABLOY’s commitment to provide more electric strike solutions for more applications,” explained Matt Branson, Product Manager, ASSA ABLOY Electronic Security Hardware. “Customers loyal to either HES or Adams Rite can use the HES 9800 or Adams Rite 7800 as a cost-effective way to upgrade an opening from mechanical to electrical. With no need for door modification, a dedicated power supply or wire transfers, there is less labor time spent installing the hardware.” The HES 9800 Electric Strike expands the HES 9000 Family of surface mounted electric strikes to offer a new option to easily electrify a retrofit project HES products lead the access control industry with electric strikes for any type of lockset application. The HES 9800 Electric Strike expands the HES 9000 Family of surface mounted electric strikes to offer a new option to easily electrify a retrofit project that utilizes Adams Rite Starwheel or Interlocking rim exit devices. Cost-Effective Solution Adams Rite is the Aluminum Hardware Authority, specializing in door and door hardware solutions for narrow stile aluminum applications. The Adams Rite 7800 Electric Strike is designed to offer an electrification option for narrow stile aluminum applications that require a life-safety rim exit device. The Adams Rite 7800 Electric Strike adds a no-cut surface mounted electric strike to the product portfolio, providing loyal Adams Rite customers with a cost-effective solution to electrify the Adams Rite EX88 Exit Device. The HES 9800/Adams Rite 7800 exceeds Grade 1 standards for strength and performance. All functions are performed within the ½” thick strike body, which is protected by a sleek stainless steel cover to conceal the mounting screws and provide the most aesthetic appearance. The HES 9800/Adams Rite 7800 is dual voltage, field selectable for fail secure or fail safe operation, and comes with one 1/16” and one 1/8” spacer plate to accommodate varying door gaps.