Check Out Our Special Report On Casino Security

American Dynamics ADCi600-D111High-Definition IP camera

Technical Specification

Features:

Make: American Dynamics
Model code: ADCi600-D111
Series: Illustra 600 Series
Chip Inch Size: 1/3
Color Type: Color / Monochrome

Additional info:

The Illustra 600 Series Indoor Mini-Domes offer the same features in the 720p resolution model and 1080p resolution model. These cameras feature three integrated mounting options including hard surface, electrical box and recessed, all of which require no additional hardware or cost. The recessed mounts use integrated “swing wings” to reduce the time spent on ladders or the need to order additional parts. The camera body has built in threaded conduit holes for side and rear access, which allow installers the quickest and best way to position the camera, reducing installation time. The 3-9mm lenses are motorized for remote zoom and one-touch auto focus, further saving installation time.

Contact manufacturer Contact manufacturer

Datasheet Datasheet

Make	American Dynamics
Manufacturer	American Dynamics
Category	Video Surveillance>IP Dome cameras
Model code	ADCi600-D111
Series	Illustra 600 Series
Chip Inch Size	1/3
Color Type	Color / Monochrome
Resolution TVL	720
HD	Yes
Sensitivity lux	0.04
Dome Type	Variable Focus
Indoor/Outdoor	Indoor
Electrical Specifications	Voltage: 12 V DC / 24 V AC
Focal length	3 ~ 9
Compression	H.264, MJPEG
S/ N (Signal/ Noise) Ratio dB	70
Built-in IR LED	Yes
Video Output	1 Vp-p, 75 Ohms
Network Properties	Interface: Ethernet 10/100Base-T Network Protocols: TCP/IP, DHCP, HTTP, ICMP, UPnP, ARP, DNS, DDNS Image Frame Rate: 30 ips NTSC / 25 ips PAL
Physical Specifications	Dimensions mm: 130 x 120 Weight g: 907
Environmental Specifications	Operating Temp ^oC: -10 ~ +50 Protection: Vandal Resistant
System Requirements	Web Browser: MS IE 8.x or greater, Mozilla Firefox, Chrome
Additional info	The Illustra 600 Series Indoor Mini-Domes offer the same features in the 720p resolution model and 1080p resolution model. These cameras feature three integrated mounting options including hard surface, electrical box and recessed, all of which require no additional hardware or cost. The recessed mounts use integrated “swing wings” to reduce the time spent on ladders or the need to order additional parts. The camera body has built in threaded conduit holes for side and rear access, which allow installers the quickest and best way to position the camera, reducing installation time. The 3-9mm lenses are motorized for remote zoom and one-touch auto focus, further saving installation time.
Download PDF version Download PDF version