Anviz Access Controllers

The experience of the COVID-19 pandemic has made us all more conscious of who is coming and going from our property. Whether it is a family home, business premises or public building, property owners want full control over access for protection and peace of mind. As a provider of access control technologies, we are seeing a growing demand for automated gates with a variety of access control systems. There are a number of considerations that buyers need to make when investing. And as an installer, there is advice that you can offer to help your clients make the right choice for their property. Here are some of the key considerations you’ll need to make and discuss with your client. Whomever you buy from, you should be offered more than a simple instruction manual. Electronic locks, magnetic locks and code security In the first instance, you’ll need to advise on the type of lock and access control available. Electronic locks release on the operation of the automation system to allow the gates to open. Locks are required for all non-locking (also known as reversible) operators and are recommended for any gate on a multi-user site or any gate over 2.5m. Apply the same logic to an automated gate as you would to a domestic door – for example, you wouldn’t fit your front door with a lock on the same side as the hinges or a drop bolt at the hinge end of a manual gate so why dispense with this logic when the gate is automated? Electronic locks release on the operation of the automation system to allow the gates to open There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks. These are all designed for external use. While the gate itself will provide physical security, the customer will want to feel in control of who enters their property, when and for what purpose. Consider access for mail and deliveries, waste disposal and visitors arriving on foot etc. There is a range of options available. Intercom systems will allow the user to vet visitors, keypad entry can allow remote access for visitors with a specific code, remote controls allow an oncoming driver to open the gates without getting out of the vehicle, and a timer control can be used to open or close the gates at certain times of the day. Vehicle detection loops can be installed discreetly under the tarmac allowing the presence of vehicles to exit the gates and prevent closing while obstructed. Sliding gates versus swinging gates There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks Gates can be automated to either swing or to slide open and in the case of swinging gates, the opener may be concealed underground or gate mounted. The most suitable opener for your installation will depend on the space available and the type of gate selected. Concealed underground automation is ideal for highly ornate gates. However, where gates are fully infilled (typical of many timber designs), gate mounted openers are concealed from the front of the gate by the gate leaf and present a cost-effective option. The choice between slide and swing is largely down to space - swing gates require a clear space for their opening arc while sliding gates require space to one or both sides of the gate. Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited, as they use the least space when opening. Voltage Most swing gate and sliding systems are available in 24v or 230v. The 24v systems still need 230v mains power – there is a transformer built into the 24v control panels. Deciding which voltage to use can include a combination of factors such as the material of the gates, the location of the system and the safety features you want. Concealed underground automation is ideal for highly ornate gates With wrought iron gates, the wind can pass through them whereas with fully boarded wooden gates (popular because they give full privacy) the wind has nowhere to go, so they act like sails. For commercial or industrial applications with larger entrances and a heavy gate, you may need 3 Phase 400v power (sliding gates only). Installing gate motors in confined spaces The environment in which you are fitting may well influence which gate and motor you recommend. Will it be in an exposed area which is subject to the elements? Will it be positioned on a slope? Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited Installers have always faced the challenge of installing gate motors in confined spaces. When fitting a pedestrian gate, there is often limited space in which to work – potentially making an installation time consuming and technically demanding. If this is the case for you, consider a gate operator which is designed specifically for installations with limited space for maneuver. An example of this is the E5 compact gate operator. The operator is not only small but has an optional slide lever attachment designed for installations where there is extremely limited space, meaning that just 8cm of the pillar is needed for installation. What’s more, improved fixing points and a simple ‘hook and fasten’ process means assembly is safe, quick and straight forward. Ultimately, you’ll be looking for a good quality, reliable product with good service. Work with a supplier that offers more than just a manual. If they are happy to offer training, their time and advice when you buy, the chances are you’ll get their support long term.

The unprecedented global impact of COVID-19 has taken its toll on all of us, but as cases of the virus thankfully recede, employers are now forced to confront how they can enable a safe return to work for employees. For many employers, this means they will have to carry out a COVID-19 risk assessment, redesign workspaces to maintain social distances, carry out more frequent cleaning, manage the transmission risk and find alternatives to touch-based security devices. Protecting workplace occupants in any emergency requires preparation and clear communication. This is especially critical in a health crisis involving an infectious disease. These are some of the essential best practices that could help organizations reduce the impact on their employees and operations during this pandemic. 1. Use a visitor management system With a visitor management system, organizations have a single source of real-time and historical insights into who is, or was recently, in the workplace. This is especially important because of the need to perform contact tracing should anyone in the organization show symptoms of COVID-19, meaning everyone they have been in contact with needs to be contacted and asked to isolate. Yet still, first impressions are made at the front desk or lobby, where the visitor experience needs to be a positive one. At the same time, though, any emergency event requires that there be strict control over who is entering the workplace. This policy also needs to be clearly communicated to visitors. Doing this minimizes risk to visitors as well as the workforce. In addition to delivering a high-quality visitor experience, the ideal visitor management system must: Enable organizations to meet regulatory compliance mandates and facilitate check-in at a self-service kiosk to minimize wait times. Customize the visitor experience to support specific security needs, such as accelerating and simplifying check-in or requiring additional security pre-checks. Automate compliance as it relates to visitor access rules with historical visit reports. 2. Pre-check questions at visitor registration kiosks Organizations can strengthen security at the registration kiosk using a flexible, enterprise-grade visitor management system to add visitor sign-in steps. This has proven successful in the past when used to control the spread of infectious disease during an outbreak. An example of this is a U.S. children's hospital which managed to reduce facility infection rates by 25 percent over a two-year period using a commercial, off-the-shelf physical identity and access management (PIAM) solution from HID Global. The solution provides two particularly important capabilities that can be used by organizations to protect their workplace from the uncontrolled spread of an infectious disease: Enhance visitor registration policy with additional mandatory questions to help identify any visitors who may need other screenings. Extend the visitor registration kiosk with a mandatory pop-up asking further questions during visitor check-in. 3. Understand who has visited your workplace Successful controlling the spread of infection throughout a facility requires the ability to automatically maintain an auditable trail of activity. This can be done using an enterprise-grade visitor management system that makes it easy to retrieve historical visit reports. This provides a timeline of who was in the workplace, and when they were there. Key features include: A single dashboard providing useful visitor insights at your fingertips. Historical reports that provide visitor details including location and contact information, all in compliance with General Data Protection Regulation (GDPR) and other privacy regulations. 4. Clearly communicate how infection risks can be reduced Global organizations must actively communicate with visitors and employees on the outbreak of infectious diseases and follow best practices outlined by the World Health Organization (WHO). Here are several things organizations can do in this area to help maintain a safe and healthy workplace: Re-enforce and communicate WHO best practices with guideline posters in the front lobby and throughout the workplace. Add posters that also encourage regular and thorough washing of hands. Encourage everyone to cough or sneese into their shirt sleeve in their flexed elbow or cover their mouth and nose with a tissue. Encourage everyone to keep a relatively safe distance from each other and use alternatives to handshakes when saying hello. Organizations must contend with a variety of workplace challenges during the outbreak of an infectious disease. These challenges can be solved with best practices that include a comprehensive visitor management system that automates critical check-in policies and maintains an auditable trail of visitor activity.  

Protecting against fire and security risks is an essential aspect of life for people and across all sectors. However, there is an increasing expectation and demand on fire and security providers, in areas such as education. The securitisation of our world paired with the rapid speed of communication and news updates means that young people especially have the potential to be more aware of potential dangers and threats to their own safety and the safety of those around them. Education institutions are large and sometimes sprawling sites that present considerable fire and security challenges. From Kindergartens to Colleges Each education site brings distinct challenges, with differing facilities and specialties, as well as the need to maintain the capacity of students, teachers and lecturers to study, learn and teach at the high level expected.Each education site brings distinct challenges, with differing facilities and specialties While some schools and universities are based in urban areas with a mix of heritage and high rise buildings, others are sprawled across green open spaces. Some of these sites have specialised sporting facilities, while others may be focused on engineering or scientific study, with costly technical equipment. Kindergartens and primary schools have their own unique requirements. Parents expect the highest safety standards, while schools require safety in addition to efficient facilities management. The demographic of these institutions is predominantly young children, who are often unaware of or only just learning about fire safety and personal safety. This creates a huge vulnerability and an added onus on teachers to keep their students safe. Facial recognition at West Academy of Beijing In response to this need, Chubb China upgraded the closed-circuit television (CCTV) system for Western Academy of Beijing (WAB) focusing on elevating video content analytic features, including maximised CCTV monitoring, automatic police calling, and a smart search solution. Complementing this, a facial recognition system capable of finding the exact location of a student on campus within 30 seconds was added, aided by real-time remote gate operation. This integrated and advanced system resulted won the "High Quality Educational Technology Suppliers for School" award for the WAB project at the 2019 BEED Asia Future Oriented Construction of Universities and Schools Seminar. This award recognizes outstanding solution design and project execution. Parents expect the highest safety standards, while schools require safety in addition to efficient facilities management Awareness remains important at university As students graduate from kindergarten, primary school, junior and senior school, they become more aware of fire safety, relevant dangers and how to protect themselves. Unfortunately, external dangers remain. There are particularly high stakes for university campus facilities managers The safety of students in a university environment is also critical. It is often the first time young people live away from their family home and have the independence of adulthood. For this reason, there are particularly high stakes for university campus facilities managers. In the eventuality of a fire, students could be at great risk and, beyond the immediacy of physical harm, this can have serious ramifications for the reputation of an educational institution. Integrated solutions Integrated solutions must be nimble and adapted to a range of site types including campus residences, recreational areas, open spaces and lecture theatres. Chubb Sicli recently identified and overcame these challenges through the installation of a full suite of fire safety and security equipment and services at Webster University Geneva. Established in Switzerland in 1978, Webster University Geneva is an accredited American university campus that offers programs in English to students interested in undergraduate or graduate-level education.  Located in the Commune of Bellevue, just a few kilometres from Geneva's central station, the campus of Webster University Geneva includes five buildings in a park-style atmosphere. Full fire and security audit Chubb Sicli provided Webster’s fire extinguisher maintenance for over 25 years. This business relationship led to a full fire and security audit that identified the need for updates to the university’s security installation. The initial audit showed several improvements to the university’s security profile were needed.The challenge was to create and provide an effective and interconnected fire and security solution The challenge was to create and provide an effective and interconnected fire and security solution, enhancing the security of the student population and its ever-evolving needs. This included complete fire detection and intruder alarms for all five buildings, upgrades to existing CCTV systems, new video surveillance equipment and an automated fire extinguishing system in the kitchen areas. In addition to this integrated system solution, Webster University required access control for all main entrances, with the requirement that all documentation to be made available in English, because Webster is an American company. Customized solution Chubb Sicli’s quality, capability, and security expertise provided a customized solution for the unique educational establishment. Not only was the solution both tailored and integrated, the approach and planning were based on audit, fire extinguisher and emergency light maintenance, fire detection, intrusion detection, access control, video surveillance and Fire Detection. Through dedicated and integrated fire safety support, Chubb provides students and families peace of mind and security. From the moment a young child enters the education system, Chubb’s diligent and effective surveillance and fire safety systems work to prevent and protect, offering a new kind of ‘end-to-end’ service for education systems around the world.

In 2020, with the continuous spread of the COVID-19 pandemic, millions of people have been infected around the globe. Touchless security devices In these uncertain times, with the ever-increasing demand for touchless security devices, Anviz, a globally renowned biometric security solutions firm, offers the latest touchless solutions - iris and face recognition access control terminals. The company’s latest iris and face recognition access control terminals help reassure business owners, wrestling with the uncertainties of running their businesses, during this very challenging period. Iris S2000 and FacePass 7 Series access control terminals Anviz’s Iris (S2000) and FacePass (FacePass 7 Series) recognition terminals provide 100% touchless user authentication for a variety of applications, spanning access control, time & attendance, visitor management, etc. These terminals help: Detect if a person requesting access has an acceptable face mask or glasses. The face recognition readers have body temperature detection that will instantly alert and deny access to anyone trying to enter with body temperature above the acceptable range. Efficient body temperature screening Anviz’s iris and face recognition terminals feature a very powerful embedded dual core processor Denying access to anyone with high body temperature prevents healthy individuals from being infected, especially in shipping facilities, airports, schools, commercial office buildings, pharmacies, grocery stores, and so on. Anviz’s iris and face recognition terminals are a combination of a very powerful embedded dual core processor and the latest AI deep learning algorithm for high-level accuracy and quick matching-speed. Featuring integrated thermal sensor The capture time of the company’s touchless access control devices is less than 1 second and the matching speed is less than 0.5 second and its body temperature detection is accurate to within +/- 0.3 degrees Fahrenheit when a person stands within 20 inches of its integrated thermal sensor. Anviz successfully launched 3 models of its touchless access control series.

Access control now includes a strong focus on the data integration sideof the business, as showcased at this year’s ISC West When the category of physical security emerged many decades ago, it was literally all about locks, hardware and creating barriers such as fences to keep people out. Fast forward to ISC West 2016 in Las Vegas this week, where the focus is on intelligent solutions, smart data, cloud-based access control and incorporating audio, video and a wide range of safeguards in a total, integrated approach. LE-802 Intelligent Audio Analytic System Louroe Electronics, Van Nuys, California, is one of the original pioneers of audio technologies, and as systems continue to merge and converge, the element of sound provides a much-needed added dimension to fortifying physical security applications. Louroe Electronics is unveiling the LE-802 Intelligent Audio Analytic System, offering a robust and easy-to-install application for unattended audio monitoring on specific events analyzing the presence of gunshots, aggressive speech, glass breaking and car alarms. The system is a complete hardware and software solution housed in a weather- and vandal-resistant enclosure for outdoor applications. It also integrates with most video management and monitoring systems and works as a standalone edge solution analyzing sounds in real time, according to Chris Gaunt, Manager of North American Sales. Connecting Audio To Video Surveillance “Audio security gives you another piece of the puzzle and makes what was a silent movie come to life,” he says, adding that the bread and butter for the company is tying audio to video surveillance, as an attachment to cameras or nearby as an enhancement to surveillance. “For example, in schools, some 80 percent of verbal encounters lead to something aggressive, and now we can do something with preventative audio software,” he says. The company partnered with an analytics company to build the additional audio capabilities into its product, which also fits markets such as public safety, commercial and law enforcement, in addition to education. It also brought to market the Verifact® a gunshot detector for active shooter incidents. Louroe Electronics demonstrated the Verifact® Gunshot Detector at ISC West Data Builds Intelligent Processes A common theme of data and added intelligence was front and center at the show – getting more from physical security. Vanderbilt Industries, Parsippany,  New Jersey, introduced Vanderbilt VI Connect at the show, a custom-configurable data management system that integrates Vanderbilt’s security management system (SMS), with third party, disparate systems of any size to automate business workflow. Automation For Error Reduction Mitchell Kane, President of Vanderbilt Industries, says the process of access control has changed and now includes a strong focus on the data integration side of the business. “Automating workflow makes the process less labor-intensive and eliminates user error in programming permissions and schedules. The entire process is automated and performed through web interfaces and hosting. Everything we automate means one less thing to do and one less chance of doing something wrong.” VI Connect establishes rules engines and also can provide the systems integrator with detailed security audits and reports for the end user. For example, the solution can be used in higher education environments where student data — demographic information, enrolled courses, housing information and badging settings — can be processed and manipulated through the VI Connect system, ensuring that a student is only allowed to gain access to campus buildings that are relevant to that particular student’s major. CrossChex Time Attendance And Access Control Management System Anviz, an intelligent security provider with roots in biometric and RFID applications, is making its move to the cloud with the CrossChex Time Attendance and Access Control Management System. The company offers three different levels to expand the scope of specification possibilities: Desktop for small and medium businesses; Professional designed for enterprise web-based management; and Cloud for global enterprise applications. Brian Fazio, Director of Global Sales, Shanghai, China, says the three different versions provide a full solution for every type of user and their specific time and attendance applications. “CrossChex satisfies the time and attendance and access control requirements in different, complicated environments,” he says, and it also provides report management and a mobile application function that can be applied and accessed via smartphones. The lines of typical product categories continue to blur. The focus is on integrating a wide range of solutions to meet the challenges and issues of the end-user customer.

Foot traffic improved a little on the second day of ASIS International in Anaheim, California. Furthermore, the high quality of meetings at the big industry show tended to overshadow complaints about attendance. There is plenty to talk about in Anaheim. “The conversations have been much more substantial than you usually have at a trade show,” says Charles Hunger, Product Marketing Director, Anviz Global Inc. “They’re not general conversations, they’re ‘How can I use it? I have a very specific problem I need to solve.” Cloud-Based Services For Biometric Access Control Anviz specialises in small- to medium-sized business (SMB) applications. The company’s biometric time-and-attendance systems are strong in the retail/restaurant/small medical facility market, while the manufacturing vertical favours Anviz biometric access control applications. A relative newcomer to the U.S. market, Anviz announced at ASIS that it will begin offering cloud-based services for biometric access control and time and attendance. In business since 2001, Anviz has been successful in the Latin American market (especially Argentina) and entered the U.S. market in 2010, selling products manufactured in Shanghai, China, including a line of surveillance cameras branded under the Anviz name. The company has about two dozen dealers across North America, moving deliberately with a strategy to pay for growth in the U.S.  market from sales revenues. OnSSI Ocularis v5.0 ASIS is a great venue to highlight product improvements, and some new products introduced just last spring have been upgraded and improved since their initial launch. For example, OnSSI introduced Ocularis Version 5.0 in the spring, the first version of OnSSI’s flagship software that uses the company’s own recorder (versus an OEM’d recorder.) Ocularis Version 5.1 now includes additional integrations with camera manufacturers, including Arecont Vision and Canon, in addition to the cameras previously supported. The system also uses server-based motion detection. ASIS is a great venue to highlightproduct improvements, and somenew products introduced just lastspring have been upgraded andimproved since their initial launch  Fully encrypted using 256-bit AES, the software can be used in banking and government applications.The system also manages storage of video and load-balances storage among multiple drives to increase capacity. “The customer reaction to Ocularis 5 has been tremendous,” says Ken LaMarca, OnSSI’s Vice President of Sales and Marketing. “They are embracing it because it is a wholly owned product.” He says the quality of attendees at OnSSI’s booth has been very good. “But there haven’t been enough of them.” Placing confidence in the uniqueness of a product line is a good strategy in the era of commoditization. That seems to be the case for MOBOTIX, which has always charted its own product development course. The German company emphasized IP video when analog was still dominant, and they were also early to the idea of edge storage. Even with a heritage of innovation, Keith Jernigan, MOBOTIX General Manager, says the company needs to work to educate the market on who they are.  New Thermal Cameras Offering hemispheric cameras, a new thermal radiometry camera and improved video management software (VMS) that is touch-screen and intuitive to operate, the company has a lot to tell the market about. There is also a 6 megapixel camera in the lineup and “Moonlight” low-light imaging. “We believe in the technologies the company was founded on,” says Jernigan, noting that many technologies have become more common since they were pioneered by MOBOTIX. Another message for MOBOTIX at the show is use of video for functions beyond security, such as use of the new thermal camera to detect temperature extremes to monitor manufacturing or other processes. Open House Events Placing confidence in the uniquenessof a product line is a good strategy inthe era of commoditization After the show closed, events in the evening continued to draw crowds, including two open house events in nearby Irvine, Calif., a center of technology. Axis Communications hosted an open house at their new “Axis Experience Center,” a learning facility that can host up to 28 people and also focuses on use of Axis products in a variety of vertical markets, with full displays of systems targeted to markets such as gaming, education, retail and banking. A short ride away, Dahua was also hosting an open house at its Irvine facility. The Chinese company is on the verge of expanding its presence in the U.S. market, building its channel, and positioning Dahua as a trusted brand in the video surveillance market. The company has been in the U.S. market for years as an OEM/ODM manufacturer, but is now beginning to build up its branded business. The global company is already selling products, including HD cameras, NVRs, video display walls, VMS software and video analytics, in 140 countries. It’s one of the companies that makes the ASIS show truly international.