ComNet Security devices

ComNet CNFE2MCPOEM mini ethernet media converter with PoE is designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP modules. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. It is environmentally hardened to operate in extreme conditions.

ComNet CNGE2MCPOEM 2 port ethernet media converter is designed to transmit and receive 10/100/1000 Mbps data over optical fiber through user selectable SFP modules. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 1000 Mbps. It is environmentally hardened to operate in extreme conditions. The LED indicators are provided for confirming equipment operating status.

ComNet CNMCSFPPOE/M mini ethernet media converter accepts a 10/100 or 1000 Mbps electrical input and converts this to a 100 or 1000 Mbps optical output (selected by a dip switch) and the 100/1000 Mbps optical input back to the 10/100/1000 Mbps electrical output. “Auto-Negotiating” is supported on the copper interface side. The device uses either one or two optical fibers, depending upon the selection of SFP optical module.

ComNet CNFE1002M1A-A ethernet media converter transmits and receives 10/100 Mbps data over one multimode optical fiber. It is designed to be mounted within an Aigis dome and provide optical Ethernet connectivity. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. The converter is environmentally hardened to operate in extreme temperatures. An LED indicator confirms equipment operating status.

ComNet CNFE2MC ethernet media converter transmits and receives a single channel of Ethernet data over optical fiber through user selectable SFP options. The converter is environmentally hardened to operate in extreme temperatures. The electrical port supports Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data.

ComNet FE2MC-B ethernet in-dome media converter transmits and receives 10/100 Mbps data over optical fiber through user selectable SFP options. The FE2MC-B electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. The FE2MC-B is environmentally hardened to operate in extreme temperatures. It is designed to fit in the Bosch Gen 4 Dome Camera.

ComNet CNFEVCNMCM multimode ethernet in-dome electrical to optical media converter transmits and receives 10/100 Mbps data over one multimode or optical fiber with ST connectors. The CNFEVCNMCM electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. The CNFEVCNMCM is environmentally hardened to operate in extreme temperatures. The LED indicators are provided for confirming equipment operating status. It is designed to fit in the VIcon Surveyor Dome Camera.

ComNet CNFE2MC2C ethernet media converter transmits and receives 10/100 Mbps data and two bi-directional contact closures over multimode or single mode optical fiber using SFP modules to select distance and connector type. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. The CNFE2MC2C media converters is environmentally hardened to operate in extreme temperatures.

ComNet FDC1M single channel fiber break detector is designed to detect and report a breakage or the loss of optical signal in either multimode fiber plants. Featuring a self-contained transmitter and receiver, the unit provides an optical output that is transmitted continuously through a customer-furnished fiber loop, where it returns to the internal receiver section. Should the optical path be lost through a deliberate or unintentional breakage of the fiber, relay contacts in the modem immediately change their state and report the loss of optical signal.

ComNet FDC80TM1 contact closure transmitter provides transmission of up to eight independent supervised dry switch or relay contact closures over a single optical fiber, or any two-wire RS-485 copper circuit. Microprocessor-based logic transmits the contact closure information in packets that are ordered and encoded, ensuring extremely robust and reliable transmission.

ComNet FDC8T(M)1 8-channel contact closure transmitter provides transmission of up to eight independent contact closures over one RS232 link or optical fiber. Microprocessor-based logic sends the contact information in packets that are ordered and encoded, ensuring extremely robust transmission.

ComNet FVT/FVR1014(M)(S)1 is a video transmitter/data transceiver and video receiver/data transceiver series that utilize 10-bit digital encoding and decoding for high-quality video transmission. It meets the requirements of EIA RS-250C for short-haul video transmission. It provides transmission of one independent video channel and four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. It is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support. It has a plug-and-play design that ensures ease of installation and no electrical or optical adjustments are ever required. Its bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. it is interchangeable between stand-alone or card mount configurations.

ComNet FVT/FVR414(M)(S)1 is a video transmitter/data transceiver and video receiver/data transceiver series that utilize digital encoding and decoding for high-quality video transmission. It provides transmission of four independent video channels and four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. It is universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS-232, RS-422 and 2 or 4-wire RS-485 with tri-state support. It has a plug-and-play design that ensures ease of installation and no electrical or optical adjustments are ever required. Its bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. It is interchangeable between stand-alone or card mount configurations.

ComNet FVT/FVR200D8S1 is a video transmitter/data transceiver and video receiver/data transceiver series that utilize 10-bit digital encoding and decoding for high-quality video transmission. It exceeds the requirements of EIA RS-250C for short-haul video transmission. It provides transmission of 20 independent video channels and eight bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. It has a plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Its bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

ComNet FVT/FVR320D8S1 video transmitter/receiver and data transceiver utilizes 10-bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for short-haul video transmission. The unit provides transmission of 32 independent video channels and eight bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. The unit is universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.

ComNet CNVETX1 is a single-channel, camera-ready H.264/MPEG-4/MPEG-2, and MJPEG intelligent video server/video encoder or decoder unit, with video quality of up to D1 at 1 to 30 FPS, and dual or triple encoding/streaming. It supports numerous VMS solution providers.

ComNet FVT1S1/M mini video transmitter transmits one channel of video over one optical fiber. FVT1S1/M transmitter supports single-mode fiber. It is compatible with the FVR10C1(M,S)1, FVR20C2(M,S)2 and FVR40C4(M,S)4 series of receivers. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The unit has a small footprint and is ideal for mounting where space is limited or can be mounted inside equipment housing.

ComNet FVR10C1M1 1 channel video/contact receiver supports transmission of one independent short-haul quality 10-bit digital video signals and one contact closures in the direction of the video over multimode optical fiber. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly confirming operating status. The unit may be either wall or rack-mounted.

ComNet FVR20C2S2 dual channel video/contact receiver supports transmission of two independent short-haul quality 10-bit digital video signals and two contact closures in the direction of the video over single mode optical fiber. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly confirming operating status. The unit may be either wall or rack-mounted.

ComNet FVR40C4M4 4 channel video/contact receiver supports transmission of four independent short-haul quality 10-bit digital video signals and four contact closures in the direction of the video over multimode optical fiber. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly confirming operating status. The unit may be either wall or rack-mounted.

ComNet FVT1001M1 video transmitter supports transmission of short-haul quality 10-bit digital video over one multimode optical fiber. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

ComNet FVT1001S1 video transmitter supports transmission of short-haul quality 10-bit digital video over one single mode optical fiber. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

ComNet FVTRS1A video transmitter supports transmission of short-haul quality 10-bit digital bi-directional video or sync over one single mode optical fiber. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The unit is interchangeable between stand-alone or card mount configurations.

ComNet CLFE1COAX is a 1 port coax ethernet extender that transmits individual Ethernet data channels with Pass-through Poe over standard coaxial cable. The extender extends Ethernet up to 1524 m over coaxial cable. The extender's high-data rate is ideal for the high bandwidth requirements of Mega-pixel cameras, multiple IP cameras systems, and cameras requiring jumbo frame transmission. The Symmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance.

ComNet CLFE1UTP is a 1 port UTP/twisted pair ethernet extender that transmits individual Ethernet data channels with Pass-through PoE over standard UTP cable. The extender extends Ethernet up to 914 m over UTP. The extender's high-data rate is ideal for the high bandwidth requirements of Mega-pixel cameras, multiple IP cameras systems, and cameras requiring jumbo frame transmission. The Symmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance.

ComNet FVT412S1 video transmitter / data transceiver transmits four channels of real-time color video utilizing state-of-the-art digital encoding for high-quality video transmission, along with two channels of bi-directional data, and one-directional contact closure over one single mode optical fiber. The FVT412S1 is compatible with NTSC, PAL and SECAM CCTV camera systems and supports RS232, 422 and 485 (2 & 4 Wire) data. Bi-Color LED indicators are provided to indicate the critical operating parameters.

ComNet FDC10M1(A) contact closure transceiver provides bi-directional transmission of contact closure over one multimode optical fiber. The bi-directional contact closure module has two relay outputs and one relay input. One relay output follows the “relay input” at the remote end. When the remote “relay input” is shorted, the local relay output is closed and vice-versa. The second relay output is closed when “carrier” is detected from the remote end, this indicates that the optical fiber is connected and that the remote end has power and is operating.

The NetWave Solar off the grid power systems are designed for applications where a remote camera or wireless repeater is needed but power is not available or the cost to run power is too expensive. NetWave Solar is a complete system for providing remote power to edge communications equipment. The kit includes a high quality photovoltaic solar panel, outdoor enclosure, power controller with integrated power injection module, all the mounting hardware and is available with or without sealed lead acid batteries. The steel outdoor enclosure has a gasketed hinged lid with two tamper proof locks operated by a special key for high security.