Hanwha Techwin, a global supplier of IP and analog video surveillance solutions, has expanded and updated its line-up of PTZ cameras to include six new models. The cameras are available in 4K/6MP/2MP resolutions with 25x/40x optical zoom ranges to fit any use case. New PTZ Plus cameras Featuring the groundbreaking Wisenet 7 chipset, the new models include three IR models (XNP-9250R, XNP-8250R, XNP-6400R) and three non-IR models (XNP-9250, XNP-8250, XNP-6400). The new PTZ Plus cameras are 65% lighter than conventional PTZ cameras and include a re-designed twist-lock mounting feature to simplify installation. A single HPoE RJ-45 is the only connection required for power and data. Wise IR allows for monitoring in complete darkness, up to 200 meters away in crisp detail. AI deep-learning algorithm for object tracking The new cameras utilize an AI deep-learning algorithm for powerful object tracking (person or vehicle) The new cameras utilize an AI deep-learning algorithm for powerful object tracking (person or vehicle). Operators can simply right-click on an object to engage the target-lock tracking feature. The PTZ mechanism achieves a pre-set accuracy of ±0.1º, allowing the camera to move to the correct position within one second. The new dome design also enables significantly enhanced tilt angles, including 20º above the horizon and 90º straight down. The PTZ Plus cameras also feature a new dome shape, built to repel water coupled with a unique ‘triple-spin’ drying and heating function that can be operator activated by a customized soft-trigger from a VMS, like Wisenet WAVE. Offering a variety of configurations “Our new PTZ Plus cameras provide a variety of configurations to suit the unique requirements of any installation,” said Ray Cooke, Vice President, Products, Solutions and Integration, Hanwha Techwin America. Ray Cooke adds, “The lighter design with simple twist lock mounting makes installation easier than ever. With up to 4K quality, 40 and 25x optical zoom, AI- based object auto-tracking and innovative water removal features, Hanwha Techwin have raised the bar again.” Support for ‘extreme’ Wide Dynamic Range technology With Wisenet 7 SoC at their core, the new PTZ cameras support Hanwha Techwin’s proprietary ‘extreme’ Wide Dynamic Range (WDR) technology. This enables the cameras to capture ultra-clear images from scenes, containing a challenging mix of bright and dark areas. Wisenet 7’s enhanced noise reduction technology minimizes motion blur and image artifacts, while increasing object sharpness and definition. High level of cyber security Wisenet 7 offers the highest level of cyber security possible, by embedding unique certificates and encryption keys into every camera during manufacturing. The PTZ Plus cameras feature IP66, IK10, NEMA4X, & NEMA-TS 2 ratings.
Hanwha Techwin, a global supplier of IP and analog video surveillance solutions, has announced the immediate availability of a new range of easy to install and affordable Public View Monitors (PVMs) designed to help retailers deter crime. Wisenet PVMs The new Wisenet PVMs offer a complete built-in SSL-connected 2-megapixel camera, eliminating the need for system integrators to install and connect a separate supporting camera. With a choice of 10”, 27”, and 32” (inches) monitors, the three new PVMs can be easily placed at store entrances, shopping aisles, cash registers, or self-service checkouts. Public view monitors can serve as a strong deterrent to illicit behavior" “Public view monitors can serve as a strong deterrent to illicit behavior,” said Ray Cooke, Senior Vice President, Products, Solutions, and Integration, Hanwha Techwin America, adding “Our new line of PVMs has been designed for ease of installation so they can be quickly deployed across a large number of stores.” Supported by Wisenet WAVE VMS and NVRs Aside from deterring crime, the new PVMs can also display other important information, such as customized on-screen messaging to indicate a recording is in progress, as well as supplier commercials, own-brand product promotions, and special offers, by making use of the monitors’ SD/SDHC/SDXC slot, which can facilitate up to 256GB of data storage capacity. Supported by the Wisenet WAVE video management platform (Wisenet WAVE VMS), as well as Wisenet NVRs (Network Video Recorders), the ONVIF-conformant Public View Monitors can be programmed so that images captured by the cameras are either continuously recorded or when prompted to do so, by built-in face or motion detection video analytics. Face and motion detection activation The face and motion detection feature can also be configured to switch the display to ‘live’ view to make people aware they are being watched, as they will be able to see themselves on the monitor as they enter a store or walk down a shopping aisle. The display reverts to the slide show after a specified number of seconds. The PVMs can be integrated with tagging (EAS) systems to record images of people, who might be leaving the store with stolen items. Video evidence Public View Monitors will continuously stream images to a control room, where they can be viewed via VMS Regardless of whether they are displaying live images or a slide show, or the monitor has been turned off by someone using a remote control, the Public View Monitors will continuously stream images to a control room, where they can be viewed via video management software (VMS), as well as continue to be recorded on an on-site or remotely located NVR. The ultra-low light capabilities of the new PVMs, together with Wide Dynamic Range (WDR) technology performing at up to 150dB, enables the built-in camera to capture clear and sharp images in strongly contrasting light conditions, at store entrances, for example, where strong sunlight may be streaming in. Power over Ethernet (PoE+) All three Public View Monitors (PVMs) can be powered by 12V DC power supply, with the Wisenet SMT-1030PV also offering the option to utilize Power over Ethernet (PoE+), if there isn’t an existing power supply close to where the Public View Monitor is being installed. A single cable of up to 325 feet is all that is needed to provide power to the SMT-1030PV and for network communications. The three new Wisenet PVMs, which can be mounted by using standard VESA brackets, are as follows: SMT-1030PV: 10” monitor with LED backlight and 1024 x 600 display resolution. SMT-2730PV: 27” monitor with LED backlight, HDMI input, and Full HD display. SMT-3230PV: 32” monitor with LED backlight, HDMI input, and Full HD display.
Hanwha Techwin, a global supplier of IP and analog video surveillance solutions, has expanded and updated its line-up of multi-sensor cameras featuring its Wisenet 7 chipset. Enhanced Image Quality With Wisenet 7 at their core, the new multi-sensor cameras support Hanwha Techwin’s ‘extreme’ Wide Dynamic Range (WDR) technology which utilizes advanced Local Contrast Enhancement and Scene Analysis technology. This enables the cameras to capture ultra-clear images from scenes containing a challenging mix of bright and dark areas. Wisenet 7’s enhanced noise reduction technology minimizes motion blur and image artifacts while increasing object sharpness and definition. Cybersecure and NDAA Compliance Wisenet 7 offers the highest level of cybersecurity possible by embedding unique certificates and encryption keys into every camera during manufacturing. The new multi-sensor cameras are fully NDAA compliant and UL CAP certified and consume only a single license in a VSM. They also include a suite of built-in video analytics such as motion and directional detection, enter/exit, line crossing, and tampering detection. All cameras include H.265 and WiseStream II compression technology and a suite of built-in Wisenet 7 analytics. Multi-Sensor PNM-8082VT Each sensor captures 2MP HD images in lighting as low as .04 Lux with motorised varifocal lenses The new 3-channel PNM-8082VT offers excellent coverage around corners and either down or straight ahead while offering significant cost savings over deploying three separate fixed cameras. Each sensor captures 2MP HD images in lighting as low as .04 Lux with motorized varifocal lenses and a maximum FoV of 320°. Perfect for indoor or outdoor use, the PNM-8082VT features IP66, IK10, and NEMA4X ratings for protection against water, dust, impact, and corrosion. PNM-9322VQP Multi-Directional plus PTZ Camera The new PNM-9322VQP contains four multi-sensors and an additional fifth PTZ camera with 32x optical zoom. The four-head multi-sensor array accepts a choice of 2MP and 5MP modules at varying fields of view to suit the unique coverage and resolution requirements of any job. The PTZ camera can be configured to automatically zoom in and track moving objects detected by the multi-directional camera array when tracking moving objects over wide-open areas. PNM-9022V Panoramic Camera The camera includes heatmap video analytics which provides business intelligence on customer density The new 4-channel PNM-9022V utilizes alpha blending technology to stitch the overlapping images captured by its four HD sensors into a seamless 8.3MP 209° image. The camera can also be configured to capture 180° images with digital PTZ functionality across two of the camera’s channels. The PNM-9022V has low-light performance enabling color images to be rendered in light levels as low as .03 Lux. The camera includes heatmap video analytics which provides business intelligence on customer density and buying behavior. PNM-9002VQS Camera The new PNM-9002VQS is a stainless-steel version of the PNM-9002VQ 4 head multi-sensor camera. Designed for harsh environments such as food and pharmaceutical manufacturing, water treatment, and marine locations, the PNM-9002VQS has IP6K9K, IP66, IK10 ratings. It supports a range of 2MP and 5MP lens modules for precise coverage in any environment. PNM-9000QB Camera Module The device is compatible with multiple lens modules for discretely mounting in door jams The new Wisenet PNM-9000QB camera module is designed for banks, retail, offices, and anywhere covert fraud and theft detection is required. The device is compatible with multiple lens modules for discretely mounting in door jams, mullions, and pinhole locations where space is severely restricted. The PNM-9000QB supports up to four simultaneous 2MP HD channels and provides Wisenet 7 built-in analytics such as motion and directional detection, tampering, loitering, fog, and audio detection. Cost-Effective Cameras “Having a range of NDAA compliant and UL CAP certified multi-sensor cameras with our powerful Wisenet 7 SoC provides integrators and end-users the highest possible value and performance for any video surveillance project,” said Ray Cooke, Vice President, Products, Solutions, and Integration, Hanwha Techwin America. “The savings potential extends far beyond the costs of installing individual cameras to also include significantly lower installation, network infrastructure, and license costs as well.”
Hanwha Techwin America, a global supplier of IP and analog video surveillance solutions, unveiled two new Wisenet X series NVRs that support the industry’s first video playback and recording of up to 8K super-high-resolution images. 8K recording can cover large areas with sufficient pixel density to allow operators to zoom in digitally and investigate image details in real-time or forensically and still retain a clear image. Recording capacity And storage The new NVRs in the Wisenet X series (XRN-6410DB4/ XRN-3210B4) are scalable to a total of 160TB (Terabytes) of available SATA HDD recording capacity. Both units support a recording bandwidth of 400 Mbps and include dual HDMI video outputs. The NVRs will be available in 64 channel (XRN-6410DB4) and 32 channel (XRN-3210B4) configurations and support simultaneous playback of all channels on a local monitor. The 64 channel (XRN-6410DB4) includes dual redundant power supplies to ensure continuity of recording for mission-critical applications. Both models support RAID 5 and RAID 6 configurations which provide redundancy for video storage data. Features and functions NVRs can read AI metadata generated by the edge device from deep learning algorithms New UI/ UX features greatly enhance convenience, allowing users to configure events and alarms of all channels or edit each channel from a single page. Users can also mouse over the video for a preview, making video and event search from multiple channels easier than ever. A new bookmark management function allows for easy retrieval and protection of video clips during an investigation. Integrated with Hanwha Techwin’s Wisenet P series AI cameras, the new NVRs are able to read AI metadata generated by the edge device from deep learning algorithms, enabling operators to quickly search for objects (such as a person, face, vehicle, and license plate) and attributes associated with them. Support for dynamic events allows the system to receive alarm event triggers based on current license-free analytics as well as new analytics released in the future without requiring a firmware upgrade. Analytics configuration “The new Wisenet X series NVRs demonstrate our industry-leading technological power by offering superb quality images of up to 8K super-high-resolution with precise and efficient monitoring through integration with AI cameras. The new UI/UX makes analytics configuration across all channels easier and faster than ever before,” says Ray Cooke Vice President - Products, Solutions, and Integration, Hanwha Techwin America. “With 16 times the resolution of HD, 8K gives organizations an amazing capacity to digitally zoom into large coverage areas without loss of detail.”
Hanwha Techwin, a global supplier of IP and analog video surveillance solutions, has announced the expansion of its line of public health surveillance technologies with the new Wisenet TNM-3620TDY body temperature detection camera. The multi-purpose device uniquely combines Artificial Intelligence (AI) with a dual-sensor design to securely monitor facility entrances and accurately identify potential health risks. Wisenet TNM-3620TDY camera The Wisenet TNM-3620TDY body temperature detection camera offers two detection modes to discreetly scan people entering a facility. When used in estimated body temperature (EBT) mode, the camera’s 2-megapixel visible light sensor captures and sends AI-based face detection data to its QVGA-class thermal sensor, which simultaneously measures the body temperature of each subject. Temperature monitoring is accurate to within +-0.3⁰ C when used with a blackbody calibration device and the camera will trigger audio/visual alarms and notifications when elevated temperatures are detected. An onscreen display indicates a subject’s temperature measurement, and a color-coded indicator is shown over their face. High-resolution surveillance video The Wisenet TNM-3620TDY camera can also be used as a traditional radiometric device The Wisenet TNM-3620TDY camera can also be used as a traditional radiometric device, with the visible sensor providing high-resolution surveillance video to assist in identifying people and activities. In this mode, onboard video and audio analytics are available to detect area intrusion, line crossing, loitering, and temperature detection. A spot temperature measurement feature also enables operators, via a web viewer, to obtain targeted temperature measurements by isolating specific areas within an image. Keeping customers and employees safe The TNM-3620TDY joins Hanwha Techwin’s full suite of solutions for helping businesses adapt during the COVID-19 pandemic, comply with new public health guidelines and keep customers and employees safe. “Business owners and managers of public spaces need flexible options for remaining open and operating efficiently,” said Ray Cooke, Vice President, Products, Solutions, and Integration, Hanwha Techwin America. Integrated with Wisenet 7 System on Chip (SoC) Ray adds, “With this new camera and all our solutions for occupancy level monitoring, face mask detection and social distancing measurement, Hanwha Techwin gives them a choice of health and safety technologies they can tailor to their operations.” The new TNM-3620TDY is based on Hanwha Techwin’s Wisenet 7 System on Chip (SoC), the core technology driving its enhanced image quality and advanced cyber security protection capabilities. The camera has a Micro SD/SDHC/SDXC slot that allows up to 256 GB of video data to be stored at the edge. This method of recording is useful in the event of a network disruption, enabling video evidence that potentially might have been lost to be easily and quickly retrieved when a connection is restored. Seamless connection to VMS, NVR and video decoder The TNM-3620TDY camera can also complement a facility’s existing COVID-19 safety protocols The camera can connect to a VMS, NVR or video decoder, or be used as a standalone device to comply with healthcare privacy concerns. The camera’s face detection area can be customized, for example to target the eye region, to prevent false positives from a warm forehead. The TNM-3620TDY camera can also complement a facility’s existing COVID-19 safety protocols, as people with detected elevated temperatures can be discreetly asked to enter a separate screening area for secondary screening with an FDA-approved clinical thermometer temperature reading. IEC 60601 certification The TNM-3620TDY is compliant with a series of technical standards for the safety and essential performance of medical electrical equipment published by the International Electrotechnical Commission (IEC). In addition, Hanwha Techwin has completed the Food and Drug Administration’s (FDA) facility registration process, with device registration for FDA 510(k) clearance in progress. The TNM-3620TDY supports H.265, H.264 and MJPEG compression formats, as well as WiseStream II, Hanwha Techwin’s compression technology which dynamically controls encoding, balancing quality and compression, according to movement in an image. Users can improve network bandwidth efficiency by up to 75% when combining WiseStream technology with H.265 compression.
Hanwha Techwin America, a global supplier of IP and analog video surveillance solutions, announced a new ultra-high-resolution fisheye camera with 12MP sensors. The new XNF-9010RV is equipped with Wisenet 7, Hanwha Techwin’s proprietary chipset, which offers superb quality images, extreme WDR, noise reduction, onboard de-warping, and enhanced cybersecurity features. Features Can provide 360° monitoring with a single camera and stereographic lens to offer high-quality images. Lens ensures sharp, high-resolution images in the center and on the edge of the lens. Enhanced WiseIR (infrared) allows users to adjust the IR level of the image’s center and edge regions independently for different monitoring environments, minimizing light over-saturation caused by the movement of objects or reflections on walls. Supports automatic control of IR intensity and up to 150° IR LED for reliable and clear monitoring during day and night. With virtual channel support, users can configure up to eight channels of de-warp view modes including panorama, double panorama, and quad view for various monitoring environments, greatly enhancing efficiency and user convenience. Equipped with a hard-coated dome cover and has received IP66 weatherproof and IK10 vandal-proof certifications, making it ideal for outdoor applications such as parking lots, stores, and shopping malls. Authority statement “The newly launched Wisenet 7 fisheye camera is also available in a mobile version XNF-9010RVM which achieves EN50155 class T3 certification for vehicles.” “With the image performance and advanced security of our Wisenet 7 chip, this is the most powerful fisheye camera we’ve ever released,” says Ray Cooke, Vice President - Products, Solutions, and Integration, Hanwha Techwin America.
Hanwha Techwin America, a supplier of IP and analog video surveillance solutions, announced a new app for systems integrators. The new Wisenet QR Scanner App is designed to help quickly create a list of all Wisenet devices associated with a specific project, without having to take the products out of their packaging. The QR code is found on the outside of the product carton, the bottom of the device, as well as on an included extra sticker for Wisenet modular cameras. This allows a technician to place the sticker on drawings to fully capture the device information. Installation and tracking The app, which can be downloaded from the Apple App Store and Google Play can run on any smart mobile device. It is able to capture information on all the latest generations of Wisenet products, including model names, serial numbers, and MAC addresses. This information can then be used to create a Bill of Materials (BOM) to verify that an order has been fulfilled, and ensure that all devices have been installed. IT managers can use it to keep track of devices on the network and their MAC addresses. Supports offline device registration A file is exported from the app and edited on a PC to enable installation engineers to configure the products In addition, the app supports offline device registration with the Wisenet Device Manager software tool. A file is exported from the app and edited on a PC to enable installation engineers to configure the products including pre-programming the IP address, setting an initial password, and more. When the configuration is edited offsite, the imported file will then pre-program the configuration when on-site, saving time and allowing better allocation of onsite and offsite staff. Creating tools for smooth installation “While installing a small number of cameras will likely have little impact on cost, the labor involved in tracking model names, serial numbers, and associated parts for hundreds of cameras can be significant.” “That’s why at Hanwha, we put so much effort in not only designing cameras that are easy to install but also in creating tools like the new QR scanning app to allow our systems integrators to focus on what they do best: advising customers, planning projects and ensuring a smooth installation instead of spending hours on tracking model names and serial numbers,” said Ray Cooke, Vice President - Products, Solutions, and Integration, Hanwha Techwin America.
Hanwha Techwin America, a global supplier of IP and analog video surveillance solutions, announces a new line of NVRs (Network Video Recorders) that include its powerful Wisenet WAVE video management software (VMS). Designed for small to medium-sized video surveillance installations, the new, affordable NVRs deliver a complete video management and recording solution in a rack mountable chassis with no need to install a separate server. With a focus on ease of use and installation, the 8 channel Wisenet WRN-810S and 16 channel WRN-1610S NVRs provide users with a seamlessly integrated, pre-configured package that can be set up in minutes. Supplying ample power Built-in PoE+ switches further reduce cost and save installation time by supplying ample power to cameras directly Built-in PoE+ switches further reduce cost and save installation time by supplying ample power to cameras directly. “By embedding our fully-featured WAVE VMS software directly within these NVRs, we are able to offer powerful capabilities to a new tier of the market,” said Ray Cooke, Vice President - Products, Solutions, and Integration, Hanwha Techwin America. “Version 4.1 of WAVE makes this possible with a host of new features including AI forensic search tools, analytics ROI configuration from the desktop and mobile push notifications.” Having the WAVE VMS software running inside an NVR unlocks new capabilities such as: Complete customization of the system for the unique requirements of an organization Ability to monitor PoE port power consumption as well as toggle each port on and off. Control over the embedded I/O block with the ability to tie event rules to I/O activity. Access to WAVE Sync for full remote access Mobile push events can be sent to the WAVE mobile app as events occur Utilize the latest onboard analytics such as AI object detection, mask detection, occupancy monitoring and more directly from a single interface Unified expandable licensing system that expands as an organization grows System health monitoring The WRN-810S and WRN-1610S NVRs include four WAVE Pro licenses. The new NVRs come with WAVE version 4.1, the latest release of Hanwha Techwin’s simple but powerful VMS. The latest release contains significant new features including: Full integration with Hanwha AI cameras for deep forensic search with added functionality for enhanced object classification and detection. Keyword search options enable filtering by corresponding object attributes including gender, top and bottom clothing color, vehicle type and color and bag detection. Push notifications enable operators to create rules which will send a notification to the mobile client of any selected users. System Health Monitoring displays a system’s health status and helps support teams respond to customer issues more quickly. New embedded Chromium browser is compatible with most web pages and applications. Operators can now combine web-based interfaces with a system for ‘soft integrations’ of devices and services. “With mobile push notifications, every time the camera sees someone not wearing a face mask, it can send out a notification to a mobile app user,” comments Cooke. “Using the combined power of our AI cameras allows us to do very powerful analytics on lower cost processors like those inside an NVR.”
Hanwha Techwin America, a supplier of IP and analog video surveillance solutions, will debut its next generation Wisenet 7 SoC (System on Chip). Built from 30 years of innovation in video surveillance solutions, the highly anticipated announcement sees the continuation of the Wisenet line of custom-built SoCs designed specifically to address the unique challenges of the security market. New key features include cybersecurity features, clear images in all lighting conditions, improved lens distortion correction and more. High levels of protection “Hanwha Techwin concentrated on image quality and cybersecurity when developing Wisenet 7. This enables us to make the smartest and most secure video cameras on the market today while giving us a platform for further innovation as we react to these challenging times,” said Ray Cooke, Vice President - Products, Solutions, and Integration, Hanwha Techwin America. Hanwha Techwin established its own device certification issuing system to embed certificates Wisenet 7 offers end-to-end cybersecurity with high levels of protection including secure boot, OS, storage, and JTAG, plus a signed firmware/open platform app and more. Hanwha Techwin established its own device certification issuing system to embed certificates and encryption keys into the product during the manufacturing process. When firmware is installed and a certificate is verified, it uses these encryption keys which can never be reprogramed. Forensic-Level image quality This creates a trusted platform module that separates the end-user side of the camera application from the network (Linux). This OTP (One Time Program) feature provides a unique level of cybersecurity that is secure by default and only possible when utilizing a custom chip. Wisenet 7 offers forensic-level image quality by utilizing multiple combined technologies. Digital Overlap and Scene Analysis technology reduces motion artifacts and improves picture quality in low light conditions. Dynamic Range is maximized and noise is reduced when composing multi-frame images captured at varying exposures by processing line by line vs. each frame. This minimizes motion blur and improves edge and color definition of objects, making them easier to identify when viewing live video and during forensic review. Hybrid motion detection Temporal filtering removes or attenuates frequencies within the raw signal that are not of interest XCE (eXtreme Contrast Enhancement) technology is utilized to analyze the back-light area of the image and enhance contrast by analyzing nearby pixel color values in the surrounding area. Wisenet 7 employs motion history-based temporal filtering to analyze the motion data of moving objects in low-light environments. Temporal filtering removes or attenuates frequencies within the raw signal that are not of interest. A new Noise Adaptive Hybrid Motion Detection algorithm significantly reduces sensor noise. These clearer images improve the results for object recognition performance in low light and offer maximum performance for machine and deep learning algorithms. Demanding security applications Wisenet 7 corrects barrel distortion common with wide angle lenses up to 100% at all resolutions. The correction is done in-camera to provide a video output more closely representing how humans perceive images across a wide field of vision. “The first Hanwha Techwin Wisenet SoC was released in 2010 in response to the unique requirements of security professionals. Our focused development efforts have continued as technology and business needs have evolved to where we are today. Our most powerful SoC ever, Wisenet 7, delivers a new level of quality, performance and cybersecurity to our industry,” concludes Cooke. The first Wisenet 7-based cameras (XNB-9002/8002, XND-9082RV/8082RV, XND-9082RF/8082RF, XNV-9082R/8082R, XNO-9082R/8082R) offer up to 4K high-resolution video providing clear and vivid images suitable for the most demanding security applications.
Hanwha Techwin America, a global supplier of IP and analog video surveillance solutions, announced a line of 4K AI cameras. Part of the Wisenet P series, the new AI-based cameras capture pristine images at up to 4K resolution while including powerful, in-camera deep learning algorithms for advanced object detection, classification and error-free analytics. Utilizing object recognition versus motion detection all but eliminates false alarms while also providing valuable business and operations insight. AI cameras analytics “Our new AI cameras have solid performance in both analytics and deep learning applications,” said Ray Cooke, Vice President - Products, Solutions, and Integration, Hanwha Techwin America. “The included, license-free analytics detect and classify a range of objects including people, vehicles, license plates, and faces. This technology will provide more reliable edge based intelligence, and open new opportunities in security as well as business and operations intelligence.” Unique attributes of the objects are also stored as metadata alongside the video information including: Colors of people’s clothes for both top and bottom People’s clothing length for both top and bottom People wearing of glasses or not People wearing or carrying a bag Age group Gender Vehicle types Vehicle colors Hanwha’s plugin for Video Management Software This metadata can be read by a VMS server and used in post-event forensic search to significantly reduce time spent investigating specific events. Wisenet P series AI cameras offer integration with Wisenet WAVE and other popular VMSs from Milestone and Genetec using Hanwha’s plugin. As businesses re-open with new policies regarding social distancing and occupancy limits, it’s never been more important to accurately count customers and employees as they enter and exit the premises. Unlike traditional, imprecise methods of people counting with dedicated overhead cameras, the Wisenet P series AI cameras deliver the accuracy with people counting based on the camera’s AI object detection algorithm. Reducing Server bandwidth for analytics Wisenet P series AI cameras are equipped with a ‘BestShot’ feature which ensures that only the most suitable image of classified objects is sent to a backend server. The full video image can be up to 4K resolution to see details of objects, along with tagged attributes metadata. Users have the option to set the image resolution to less than 4K for full video streaming or use BestShot to minimize bandwidth and storage requirements for server-based analytics. Additional key features include: Digital auto-tracking: provides two simultaneous streams of video, enabling operators to see the camera’s full field of view, while simultaneously viewing a Full HD digital PTZ auto-tracked image of a person or vehicle Upgraded Business Intelligence: integration with Wisenet Retail Insight providing gender and age group counting 12V DC power supply (50mA max): provides power for external sensors including LEDs, PIR sensors, and glass break detectors, eliminating the need for an additional power supply AI Dome cameras series The new Wisenet P series AI cameras are available in the following configurations: PND-A9081RV – 4K AI dome camera with built-in IR illumination PND-A9081RF – 4K AI flush-mount AI dome camera with built-in IR illumination PNV-A9081R – 4K AI vandal-resistant dome camera with built-in IR illumination PNO-A9081R – 4K AI bullet camera with built-in IR illumination PNB-A9001 – 4K AI box camera
Hanwha Techwin America, global supplier of IP and analog video surveillance solutions, has announced that Hanwha’s Wisenet L series cameras are now compatible with the Genetec Stratocast cloud-based video surveillance-as-a-service (VSaaS). Through this technology partnership, customers across a broad range of industries will now be able to reap the benefits of an easy to install true-cloud solution whether they want to support hybrid-cloud deployments, add new cameras in remote locations, or serve the needs of small and mid-sized installations in a cost-effective way. Integration with Stratocast cloud-based VSaaS Stratocast cloud-based video surveillance-as-a-service (VSaaS) requires no software installation, port forwarding or network setup, and allows organizations to significantly reduce installation and on-going maintenance costs, making it an ideal solution for sites where IT staff, resources, and budget are limited. To make the enrolment process easier than ever before, customers can simply scan a QR code to bring L series cameras into the Stratocast portal in one simple step instead of logging into multiple webpages. Enhanced cyber security We are offering a solution that is cyber secure, cost-effective and easy to install" "We are pleased that Hanwha is first to market with a Stratocast-ready QR code enrollment option,” said Oktay Yildiz, Product Line Manager for Genetec Stratocast. “At Genetec, we believe strongly in building a network of trusted partners that have our customers’ cyber security best interests at heart. By extending our deep strategic partnership with Hanwha into the cloud, we are offering a solution that is cyber secure, cost-effective and easy to install.” Wisenet L series cameras The Wisenet L series cameras are very affordable surveillance cameras with essential features ideally suited for the needs of small and mid-size installations. The broad line-up includes fixed and varifocal lens, and bullet, dome and vandal-resistant dome cameras that are designed for both indoor and outdoor use. “With the L series now Stratocast-ready, and other camera families soon to follow, we will be offering our joint customers a comprehensive line-up of video surveillance solutions, that satisfy the needs of projects across a wide range of market sectors, from small/medium businesses and retail chains to city-wide surveillance,” said Ray Cooke, Vice President – Products, Solutions and Integrations at Hanwha Techwin America.
Hanwha Techwin America, a global supplier of IP and analog video surveillance solutions, has announced the immediate availability of its latest multi-sensor cameras. The new cameras feature motorized varifocal lenses for precise control of focal length, angle of view and zoom for each direction. Each sensor supports remote PTRZ (pan, tilt, rotate, zoom) control for efficient installation and easy adjustment. The latest 2MP PNM-9084RQZ and 5MP PNM-9085RQZ IP PTRZ cameras feature built-in IR illumination for each sensor, while the 2MP PNM-9084QZ is also a compact and cost-efficient four channel PTRZ camera. IP PTRZ cameras Focused on cost savings for both installers and end users, multi-sensor cameras use less cable, conduit and mounting hardware and require fewer ports on the switch and VMS licenses due to their single IP connection. Unlike fisheye lenses, multi-sensor cameras have more pixels focused in each direction with a broad range of customizable angles and zoom settings per lens. All sensors feature up to 60fps per channel for smooth motion capture and up to 150dB WDR (wide dynamic range) for enhanced image quality and a suite of license-free onboard analytics powered by Hanwha’s Wisenet 5 chipset. Multi-Sensor cameras “Our multi-sensor cameras enable operators to choose from a broad range of customizable angles and zoom settings per sensor and offer cost savings for both system integrators and end users,” said Ray Cooke, Vice President - Products, Solutions, and Integration, Hanwha Techwin America. He adds, “The PTRZ varifocal lenses make installation adjustment more efficient than ever and also enable easy to view adjustments after installation. Plus with WiseStream II compression technology and H.265, users enjoy reduced bandwidth and lower storage costs.” The new Hanwha Techwin multi-directional camera models include: PNM-9084QZ: 2MP x 4ch, 3~6mm motorized PTRZ varifocal lenses PNM-9084RQZ: 2MP x 4ch, IR, 3.2~10mm (3.1x) motorized PTRZ varifocal lenses PNM-9085RQZ: 5MP x 4ch, IR, 4.13~9.4mm (2.3x) motorized PTRZ varifocal lenses
At GSX 2019, in booth 251, Hanwha Techwin America, a global supplier of IP and analog video surveillance solutions, will announce its new Pentabrid hybrid video recorders. Allowing both analog and IP cameras to connect to the same unit, Pentabrid recorders support a future-proof migration from analog to IP camera technologies when an organzation is ready. Available in 16, 8, and 4 channel configurations in resolutions up to 4K UHD, Hanwha Pentabrid recorders can convert any channel at any time between analog and IP with a simple software switch so there’s no additional investment needed. The Pentabrid line offers a familiar interface while accepting multiple camera brands and technologies—AHD/TVI/CVI(4K)/CVBS/IP(4K). Hybrid DVR/NVR Pentabrid recorders “We are proud to offer our first hybrid DVR/NVR Pentabrid recorders,” says Ray Cooke, Vice President - Products, Solutions, and Integration at Hanwha Techwin America. “This is a perfect fit for existing analog installations that want to make a safe investment in recorder technology without compromising their ability to migrate to new IP technology and the many benefits it can bring.” Available Pentabrid configurations with fixed SATA internal HDDs: HRD-1662, 1661: 16 channel 8 SATA / 4 SATA HRD-862, 861: 8 Channel 4 SATA / 2 SATA HRD-462, 461: 4 Channel 2 SATA / 1 SATA
At GSX 2019, in booth 251, Hanwha Techwin America, a supplier of IP and analog video surveillance solutions, will announce its new 32 megapixel 8K network camera. The TNB-9000 utilizes a full size 35mm CMOS sensor to deliver true 8K performance at up to 12fps. The TNB-9000 covers large areas with sufficient pixel density to allow operators to zoom in digitally and investigate image details in real time or forensically and still retain a clear image. Operators can even adjust the field of view. Highest Resolution Camera The TNB-9000 represents our highest performing, highest resolution camera to date" The camera is ideally suited for stadiums, airports and similar large spaces where installing multiple cameras may be impractical or cost prohibitive. Support for EF (Electro Focus) mount lenses, with remote focus, gives customers exceptional flexibility in lens options and low light performance. “The TNB-9000 represents our highest performing, highest resolution camera to date,” says Ray Cooke, Vice President - Products, Solutions, and Integration at Hanwha Techwin America. “The ability to digitally zoom in to any area of an image without losing detail provides a powerful alternative to traditional multi-camera installations.” Focal length and aperture The TNB-9000 EF lens mount accommodates any Canon EF mount lenses, allowing for a wide variety of options for focal length and aperture. The TNB-9000 camera view angle can be remotely adjusted, both vertically and horizontally, without reducing pixel density. This potentially reduces the costs associated with post installation service. Additional highlighted features: Auto focus for EF lenses Triple codec support including the H.265 main 10 profile Built-in fiber connectivity SFP slot HDMI output for 1080p adjustment at the camera PoE+ or 12Vdc
At GSX 2019, Hanwha Techwin America, a global supplier of IP and analog video surveillance solutions, will announce its new line of AI cameras. The new cameras recognize humans versus vehicles, faces, license plates and more, greatly enhancing the accuracy of video analytics over previous generations. The PNO-A9081 series features 4K resolution while the PNO –A8081 series features 5MP resolution. Both camera models include 2.2x zoom with motorized varifocal lenses (4.5~10mm, F1.6). The new AI algorithms can discern human beings as distinct objects separate from their surroundings because they have been exposed to thousands of images of humans. With this additional data, the cameras can support advanced rules about the movement of cars and the movements of people within the same image. “Analytic alerts can be more useful when we can be selective about the objects that matter to you,” says Ray Cooke, Vice President - Products, Solutions, and Integrations at Hanwha Techwin America. “For example, trucks passing by in either direction near a loading zone might be expected behavior, so in this case you do not want motion from trucks to trigger an event. But we are now making alerts more selective, so if a person enters the area, an analytic event would be triggered.” With deep learning and neural networks, we have achieved a new level enhanced analytics and data gathering.” Quick and efficient installation The new AI cameras also tell users more about the objects they detect. They recognize types of vehicles such as a bus or car and the color of a vehicle as well. This additional metadata reduces the time to search video for objects of interest to minutes instead of hours. “When speaking to end users about analytics, many still don’t take full advantage of them,” says Cooke. “Often, this is because of the false-positives with previous generation technology, or previous generation alerts not being selective enough for what they need to know from their cameras. With deep learning and neural networks, we have achieved a new level enhanced analytics and data gathering.” The new cameras utilize Hanwha’s modular design, which enables quick and efficient installation and future maintenance. Highlighted features and models: PNO-A9081R, PNV-A9081R, PND-A9081RV, PND-A9081RF: 4K, 2.2X M-V/F (4.5~10mm, F1.6), AI, PoE+ PNO-A8081R, PNV-A8081R, PND-A8081RV, PND-A8081RF: 5MP, 2.2X M-V/F (4.5~10mm, F1.6), AI, PoE+
At GSX 2019, in booth 251, Hanwha Techwin America, a global supplier of IP and analog video surveillance solutions, will announce availability in September for Wisenet WAVE 4.0, the next version of their VMS (Video Management System) designed to support the advanced features and license-free onboard video analytics that are unique to Hanwha cameras. Wisenet WAVE 4.0 VMS Available from Hanwha’s network of authorized distributors, Wisenet WAVE 4.0 is ideally suited to meet the needs of customers looking for a reasonably priced and easy to use end-to-end video surveillance solution. WAVE gives users the ability to create tailored layouts for the way they want to use their Wisenet video surveillance solutions on any device. Wisenet WAVE VMS has been very successful for customers looking for a flexible solution that is reliable and simple" “Wisenet WAVE VMS has been very successful for customers looking for a flexible solution that is reliable, simple and lightweight. With Wisenet WAVE 4.0, we have continued to develop features and functionality our customers are asking for while also building for the future,” said Ray Cooke, Vice President - Products, Solutions, and Integration at Hanwha Techwin America. Unified API Communication with WAVE is via Hanwha’s native unified API for maximum compatibility and efficiency. New analytics support includes: Queue Management (Queue-meter) – for retail queue management. Users can set up to three rectangular regions to monitor three lines. If a queue gets backed up, an event can be triggered to alert the end-user to assess and take action. Shock Detection – Introduced in the Wisenet X series PLUS line of cameras, gyro sensors can detect when a camera is shaking or enduring physical shock. This can trigger an alarm or custom event in WAVE 4.0. Temperature change detection from thermal cameras – When working with the recently released Wisenet thermal cameras, change in temperature above or below a threshold can trigger an alarm in WAVE. Remote access For remote access, a new WAVE mobile app version 19.3 features smart motion search from within the mobile client For remote access, a new WAVE mobile app version 19.3 features smart motion search from within the mobile client. Users simply press and drag on a region from within the camera’s field of view and motion slices pop up in the timeline showing any motion that occurred within that region within any time period. In WAVE 4.0, the system architecture has been revamped to ensure every moment is captured and recorded with minimum downtime while providing increased scalability. The previous 50 server limit has been doubled to support up to 100 servers in a unified site (each server can support 128 camera streams). Multi-server failover is built into the software and ready to be activated with only a few clicks, and without requiring any extra failover licenses. Additional highlighted features in WAVE 4.0: Improved support for Wisenet Q series NVRs with integrated PoE Improved PTZ support and functionality on NVRs and SPE encoders Encrypted video and HTTPS communications provide the ability to force the system to use HTTPS and to encrypt video traffic When using WAVE Sync, users can easily merge systems over the internet that are registered to the same user account Metadata SDK A metadata SDK allows for the integration of object metadata (coordinates, tags) Additionally, a metadata SDK allows for the integration of object metadata (coordinates, tags) generated by third party computer vision applications. This allows for the integration of several functions including the ability to overlay bounding boxes and object paths within video tiles, as well as integrate custom actions and events. Wisenet WAVE supports all major operating systems including Microsoft Windows and Linux Ubuntu for server application; Microsoft Windows, Linux Ubuntu and Apple MacOS for the client application; and Apple iOS and Google Android for the mobile application and web clients. Hanwha also includes an API package accessible by developers directly within the server application enabling easy third party integration with Wisenet WAVE. Software integration “Small and medium businesses range from one or more large sites, to several campuses or a small chain of sites. These organizations, and their public sector counterparts, demand end-to-end simplicity that is friendly to their budget upfront, and for the long term,” said Cooke. “Wave 4.0 provides just that, with features and solutions for these environments as their needs expand.”
At GSX 2019, on booth 251, Hanwha Techwin America, a supplier of IP and analog video surveillance solutions, will announce its latest multi-sensor cameras. The new cameras feature motorized varifocal lenses for precise control of focal length, angle of view and zoom for each direction. Each sensor supports remote PTRZ (pan, tilt, rotate, zoom) control for efficient installation and easy adjustment. The 2MP PNM-9084RVQZ and 5MP PNM-9085RVQZ feature built-in IR illumination for each sensor while the PNM-9084VQZ is a compact and cost efficient four channel PTRZ camera. Focused on cost savings for both installers and end users, multi-sensor cameras use less cable, conduit and mounting hardware and require fewer ports on the switch and VMS licenses due to their single IP connection. Multi-Sensor cameras Our multi-sensor cameras offer savings beyond just reduction in camera placements and network" Unlike fisheye lenses, multi-sensor cameras have more pixels focused in each direction with a broad range of customizable angles and zoom settings per lens. All sensors feature up to 60fps per channel for smooth motion capture and up to 150dB WDR (wide dynamic range) for enhanced image quality and a suite of license-free onboard analytics powered by Hanwha’s Wisenet 5 chipset. “Our multi-sensor cameras offer savings beyond just reduction in camera placements and network,” said Ray Cooke, Vice President of Solution & Product Management, Hanwha Techwin America. “The PTRZ varifocal lenses make installation adjustment more efficient than ever – and all the more so for adjusting the view after installation. Plus with WiseStream II compression technology and H.265 you can see reduced bandwidth and storage” Multi-sensor camera models and their key features are as follows: PNM-9084QZ: 2MP x 4ch, 3~6mm motorized-varifocal lenses, PTRZ PNM-9084RQZ: 2MP x 4ch, IR, 3.2~10mm motorized-varifocal lenses, PTRZ PNM-9085RQZ: 5MP x 4ch, IR, 3.6~9.4mm motorized-varifocal lenses, PTRZ
At ISC West 2019, in booth #14079, Hanwha Techwin America, global supplier of IP and analog video surveillance solutions, is slated to announce its latest multi-sensor camera, the Wisenet PNM-9000VD (2-head) delivering 5MP image quality and modular lens configuration at an affordable price. Wisenet 5MP IP Camera The PNM-9000VD supports 30fps image capture and true 120 dB WDR (Wide Dynamic Range) without compromising frame rate for each of its 5MP sensors The PNM-9000VD supports 30fps image capture and true 120 dB WDR (Wide Dynamic Range) without compromising frame rate for each of its 5MP sensors. For maximum adaptability, configurable factory focused lens/CMOS sensor modules are available in 3.7, 4.6, and 7mm for multiple fields of view which can be easily installed on site. Hallway view aspect ratios are also supported for monitoring of vertical shaped areas. Each sensor has its own Wisenet 5 chip providing a full suite of built-in video analytics including loitering, directional detection, fog detection, tampering, motion detection, and objects entering or exiting an area. H.265 Video Compression The PNM-9000VD supports a selectable triple codec featuring H.265/H.264/MJPEG, which is complemented by Hanwha Techwin’s in-house developed WiseStream II technology. Additionally, for customers still utilizing the H.264 video compression-based VMS and servers today, having H.265-capable cameras provide a future-proof investment as the infrastructure continues to evolve. “Hanwha Techwin is one of the first manufacturers of multi-sensor cameras in the video security market that support a triple codec, including H.265, H.264 and MJPEG” said Ray Cooke, Vice President of Solution & Product Management, Hanwha Techwin America. “We’re happy to see the increased momentum for H.265 as more organizations realize that high-resolution video doesn’t necessarily have to take up more space.” The PNM-9000VD utilizes a single IP address requiring only one VMS license further reducing the cost to install, service, and support.
Hanwha Techwin America, a global supplier of IP and analog video surveillance solutions, has announced that Jordan Rivchun has joined the company to drive its most important retail projects and to lead solutions and strategy in the retail vertical and other related customer segments. In his business development role, Rivchun will be instrumental in increasing retail end users’ awareness of Hanwha’s leading security products. Security And Loss Prevention Expert “Jordan is a dynamic leader and is well respected within the loss prevention industry. His extensive experience as a loss prevention executive and practitioner fully supports Hanwha’s mission to engage and listen to our end users to envision the solutions our customers trust us to build,” said Ray Cooke, Vice President of Business Development, Hanwha Techwin America. “He will be influential in making an even stronger connection between our end users and product development team. We are thrilled to have him on board.” Rivchun brings more than 15 years of security and loss prevention experience. Most recently, Rivchun was director of loss prevention with DSW (Designer Shoe Warehouse), where he was responsible for all facets of the Loss Prevention program including physical security, internal investigations, loss prevention systems and data analytics, as well as the field organization. Rivchun was also an active member of RILA’s Asset Protection Leaders Council (APLC). Prior to his 8-year career at DSW, he worked for Security Risk Management Consultants, Target, and Nordstrom in both security and loss prevention capacities.
Hanwha Techwin America announced that its flagship camera line, Wisenet X, is now certified with Genetec™ Security Center 5.6 SR1 utilizing H.265 and WiseStream technology. H.265, also known as HEVC (High Efficiency Video Coding), is a codec that was used only in the broadcast industry, but the demand for higher megapixel cameras and resolution was the driving force that introduced this technology into security surveillance. With the certification of Hanwha’s megapixel cameras supported by the Genetec Security Center Platform, integrators can provide even higher levels of performance, efficiency, and added value. Hanwha’s compression technology, WiseStream, enhances video streams by lowering bandwidth on high resolution cameras while maintaining image quality. Configuration of this technology is accessible via the Security Center Config Tool. WiseStream uses predictive bitrate control technology that efficiently knows when to decrease bitrates based on motion in the field of view. This compression technology can be combined with H.265 and even H.264 to provide more days of recording retention while decreasing network traffic, resulting in up to 75% of bandwidth savings.This collaboration between Hanwha and Genetec has a very good net effect for end users, including I/T teams" High-Resolution Surveillance Systems “H.265 is an industry-leading codec that was developed for lower bandwidth video streaming while maintaining image quality,” said Ray Cooke, Vice-President of Business Development, Hanwha Techwin America. “This Genetec integration was driven by our customers’ increasing demand for high-resolution imaging formats including 4K Ultra HD. This technology far surpasses H.264 compression for generating the highest-quality images while reducing network and storage requirements.” “This collaboration between Hanwha and Genetec has a very good net effect for end users, including I/T teams: lower infrastructure costs and more affordable high-resolution surveillance systems, with the strong, proactive integration bringing this advantage to customers as part of our timely release of new cameras.” Unified IP Security Solutions “Genetec Security Center 5.6 continues to provide security administrators with greater options and flexibility to protect their assets, people and facilities. The certification of Hanwha’s Wisenet X cameras adds further variety and performance options when managing throughput with today’s 4K Ultra HD cameras,” said Laurent Villeneuve, Video Product Marketing Manager, Genetec Inc.The Wisenet X series offers a variety of other industry-leading technology, including the 150dB WDR performance “We are always collaborating with our trusted technology and hardware partners to advance the quality and reliability of our world-class unified IP security solutions,” added Villeneuve. The Wisenet X series offers a variety of other industry-leading technology, including the 150dB WDR performance, which provides clear images in extremely bright and difficult light conditions. A convenient USB port is also available for easy set-up and installation. Other notable key features include license-free audio and video analytics, dual SD card slot for increased on-board storage and image stabilization using a gyro sensor.
Artificial Intelligence: Understanding Its Place In Physical SecurityDownload
Delivering Smart, Secure and Healthy Retail Environments with the CloudDownload
Protecting Your Data Against Physical ThreatsDownload
Achieving True Situational Awareness In Operation Centers With Computer Vision & AIDownload