Mines are unique operating environments with highly specific health and safety challenges. In particular, underground mining operations typically experience low-visibility conditions and light pollution from flashlights, vehicle lights and reflective strips on equipment and clothing, making traditional surveillance and safety monitoring difficult.

These were some of the challenges facing Jiangzhuang Coal Mine in the Shangdong Province of China, which covers an underground area of 43 square kilometers, and produces more than 1.8 million tons of coal each year. The top priority for the mine’s management team is worker safety, and working practices and production are monitored 24 hours a day to minimize accident risks.

Aging surveillance system

Kong Qingwei, Director of the Jiangzhuang Coal Mine Dispatch Office, says, “We need to respond immediately to unsafe situations in the mine, whether they are caused by environmental factors, poorly performing machines, or employees not following authorized work procedures.”

Its aging surveillance system made health and safety monitoring difficult in key areas of the mine

Although the mine invests heavily in safety training and equipment for workers, its aging surveillance system made health and safety monitoring difficult in key areas of the mine. “Our previous surveillance system required us to monitor around 30 screens, 24 hours a day, often with sub-optimal image quality caused by low-light conditions or light pollution,” says Kong Qingwei. “This made our jobs extremely difficult and tiring, as well as impacting our ability to respond to safety issues quickly enough.”

Maximizing worker safety

To address its health and safety challenges, Jiangzhuang Coal Mine has implemented an intelligent video surveillance and control system from Hikvision.

The Hikvision solution supports crystal-clear video imaging, even in low-light conditions, or where light pollution is created by lights or reflective strips. This quality and clarity of imaging ensures that hidden risks can be identified more quickly and easily, allowing the safety team to respond more quickly and to protect workers in all areas of the mine.  

Improving worker health and safety

In addition to the improved imaging capabilities, the Hikvision cameras incorporate deep learning technologies to identify and respond to health and safety risks in the mine automatically, and in real time. Specifically, the cameras can identify when employees deviate from approved work procedures and send alerts to the safety team to ensure staff can be deployed before accidents occur.

The new Hikvision system increases worker safety by monitoring the areas around winches and other equipment"

For example, it is prohibited for workers to come too close to winches when they are working due to safety risks, but this is hard to monitor with traditional video cameras. “The new Hikvision system increases worker safety by monitoring the areas around winches and other equipment, and by sending alerts if employees get too close,” says Kong Qingwei.

Delivering continual improvement 

In the first three months of operation, the new Hikvision system identified more than 30 deviations from safe operating procedures. Zhang Liu, Deputy Chief Engineer at Jiangzhuang Coal Mine, says, “In the past, many of these safety risks could have gone unnoticed. However, the Hikvision system has allowed us to identify every incident in real time and to take immediate action to protect our workers, which is a hugely satisfying outcome for us.”

As well as alerting the team to potential security risks in real time, the Hikvision system also records the details of any safety incident for later analysis.

As well as accurately capturing deviations from safe working procedures, the Hikvision system supports playback and download functions,” says Zhang Liu. “We can use the insights we record to deliver continual improvement for safety procedures, and, ultimately, to support our vision for a ‘zero-accident’ mine,” he adds.

Addressing mining-specific safety requirements

The Hikvision solution is configured to support specific mining-safety applications, such as constant monitoring of surface water levels in different areas of the mine.

With the Hikvision system, we can manage surface-water levels constantly"

Constant seepage from rock formations means that surface water can accumulate in different areas of the mine, which is a problem in terms of potential flooding, damage to infrastructure, and worker safety risks,” says Zhang Liu. “With the Hikvision system, we can manage surface-water levels constantly and take action to deal with any problems that arise before water levels exceed safe limits,” he adds.

Increasing effectiveness for the safety team

In addition to surface water management, the Hikvision solution supports improved safety in other potentially dangerous areas of the mine, including inclined tunnels that are used for transporting coal and other materials underground. “The Hikvision system is like an intelligent 'eye' for us in all areas of the mine, helping us to identify potential safety issues in a timely and accurate way and to protect our workers at all times,” says Kong Qingwei.

With automated alerts for all manner of potential safety threats, the safety team can be far more effective, with no need to monitor video images constantly. “Instead of looking at grainy images on 30 screens, we can now spend more of our time responding to incidents, supporting workers, and keeping them safe,” says Zhang Liu. “This is a classic example of how automation can help to improve mine safety, while also reducing the tiring workloads associated with manual monitoring of screens.”

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

In case you missed it

Sanitization, Safety And Getting Back To Business
Sanitization, Safety And Getting Back To Business

You are not alone: operators everywhere are asking themselves what are they going to do? How are they going to get back to business, and fast? How are they going to cost-effectively operate with all the new safety requirements that have arisen as a result of COVID? How are they going to ensure it all gets done for the safety of customers and staff? How are they going to protect their brand from the negative exposure of being identified as a property with a reputation for COVID? The economic impact of COVID is expected to hit brick and mortar businesses the worst, as their businesses are dependent on people being physically present. According to a recent report by RBC, it is estimated that 70% of Americans expect to avoid public spaces, 57% of Canadians will be unwilling to attend conferences without a vaccine and 63% of people will prefer to drive vs fly.  This means, that for those of you in the business of travel, conferences, co-working spaces, retail stores, museums, art galleries, restaurants, sports arenas, hotels, cruises, airlines, resorts, theme parks, long-term care, education, etc. in the blink of an eye your approach to on-site safety just changed. To ensure your property is safe and secure, it is no longer just about access control, video surveillance and intruder alarms; it is also about sanitisation To get back to business and operating at full capacity after COVID, operations must find a way to eliminate the fear, uncertainty and doubt in the minds of their customers and employees. The affect of COVID-19 on safety and security To safely get back to business, the Centers of Disease Control and Prevention (CDC) emphasis that all operations need a pandemic response planJust like cybersecurity has had a direct impact on the IT strategy and budget, COVID will have a direct hit on the operations strategy and budget. To ensure your property is safe and secure, it is no longer just about access control, video surveillance and intruder alarms; it is also about sanitization, the lines between the security and maintenance just blurred. From customers, to employees, to government regulators, to management, the focus is now on operations and the sanitization policies, procedures and actions of the team. To put this change of priority into perspective, six months ago, sanitisation was not top of mind for people. Why, because it was not a life or death issue, we had other first world problems to garner our attention. From an operations perspective if we enabled a sanitization issue to become significant enough to impact the safety of customers and staff and therefore the brand, then that was an operational choice versus a mistake. Standards for sanitisation  Just like cybersecurity has had a direct impact on the IT strategy and budget, COVID will have a direct hit on the operations strategy and budgetThe issue is, today while the operating priority of sanitization has significantly increased, it is not measured and managed to the same standard as the other safety and security concerns across a business. Also, important to consider, while people may not hold an operation liable during this first wave, we can guarantee they are not going to be as understanding during the second wave or a future pandemic. To safely get back to business, the Centers of Disease Control and Prevention (CDC) and the Occupational Health and Safety regulators emphasis that all operations need a pandemic response plan and should follow these simple guidelines: Develop your plan Implement your plan Maintain and revise your plan While this sounds simple enough, keep in mind that requirements are constantly evolving and will continue to do so for the foreseeable future, or at least until all the research is in. To create an emergency response plan for a pandemic, properties must first determine what needs to be sanitized. The current requirements dictate that most surfaces and objects will just need a normal routine cleaning, it is only the frequently touched surfaces and objects like light switches and COVID has changed the game and made the digital transformation of operating procedures not a ‘nice-to-have’ but a must-havedoorknobs that will need to be cleaned and then disinfected to further reduce the risk of germs on surfaces and objects. The challenge is when you step back and consider what people touch in a day; the list quickly grows. After only 30 minutes, I easily came up with a list of over 60 items that one could call ‘high touch’! If you think about it, the list is extensive; telephones, doorknobs, drawer handles, counters, pens, keypads, computers, etc. and the list is only going to get longer as the research comes in.   The challenge is when you step back and consider what people touch in a day; the list quickly grows Operating efficiency  If we don’t change our ways, not only will we be doomed to continue making the same mistakes, but we will continue to be lost in paper and filing cabinetsTo scope the impact on operations as part of the plan, we must then find and identify all of those high touch things across the property. If we then combine that with the fact that CDC requires that all high touch locations must not only be cleaned more often, but that they also require that each location is first cleaned with soap and water, and then disinfected for one minute before finally being wiped down. This means a one-minute task just turned into a 4-minute task, that must now be completed multiple times a day. From a resourcing perspective this adds up quickly, and operating efficiency must be a priority. Not to mention it is going to get very complicated to measure and manage especially. Post COVID rules Getting back to business is going to be complicated; lots to do, lots of moving parts and no technology to help. The fundamental challenge to keep in mind is not that the sanitization requirements have evolved, the real issue is that for most businesses this area has been left unchanged for generations. Still today most rely on checklists, logbooks and inspections to manage the responsibilities of our front-line workers, which might have been fine before COVID. Post-COVID the rules have changed and so should the approach to managing physical operating compliance on the front lines. COVID like most physical operating requirements is tactical, detailed and specific; broad strokes, the honor system and inspections are not going to cut it. The digital transformation  COVID has changed the game and made the digital transformation of operating procedures not a ‘nice-to-have’ but a must-have. If we don’t change our ways, not only will we be doomed to continue making the same mistakes, but we will continue to be lost in paper, filing cabinets filled with checklists, never to be seen again. Only with the right data can we significantly improve the operational decisions necessary to accelerate our return to full operating capacity. At the end of the day, to fully recover, operations must eliminate the fear, uncertainty and doubt in the minds of customers and employees, only then can we really get back to business.

Which Security Technology Is Most Misunderstood, And Why?
Which Security Technology Is Most Misunderstood, And Why?

The general public gets much of its understanding of security industry technology from watching movies and TV. However, there is a gap between reality and the fantasy world. Understanding of security technologies may also be shaped by news coverage, including expression of extreme or even exaggerated concerns about privacy. The first step in addressing any challenge is greater awareness, so we asked this week’s Expert Panel Roundtable: Which security industry technology is most misunderstood by the general public and why?

Lessons Learned With Vanderbilt: How Have You Adapted To The COVID-19 Pandemic?
Lessons Learned With Vanderbilt: How Have You Adapted To The COVID-19 Pandemic?

With the postponement of tradeshows and events due to the effects of COVID-19, Vanderbilt and ComNet have taken their high quality, innovative solutions online, directly to their customer base. Through an Online Events and Training resource, you can stay connected with the brands’ top resources and products, as well as join upcoming product webinars hosted by their in-house experts. With a majority of the world currently working from home, businesses must respond to this changing landscape. As such, Vanderbilt and ComNet have turned to online resources to share new product demonstrations and other company news. One cornerstone of the ACRE brands approach was the launch of their Online Events and Training resource page. Ross Wilks, Head of Marketing Communications at Vanderbilt, credits this online resource as the anchor to their communicative success with customers at present. “Through weekly webinars delivered by our in-house experts, Vanderbilt and ComNet have embraced more virtual opportunities to continuously communicate to our customers regarding our latest and most relevant products,” he says. “To date, our webinars have covered a wide range of industry topics such as Why Physical Security and Cloud go together, and The most recent developments in card cloning and reader hacking. Attendance to these online events has proved popular and effective in keeping communication with our customer base open and engaging.” Each webinar ends with a Q&A section, as well as follow-up articles on the most asked questions, plus recordings of the webinars being made available to attendees. As such, the webinar approach has proven a receptive approach for Vanderbilt and ComNet. The Online Events and Training resource acts as a one-stop-shop for all virtual information. Overall, the page outlines the brands’ value-added resources for customers, including the ability to request a remote product demonstration, the availability of free online training, 24/7 access to the Vanderbilt webshop, plus the aforementioned weekly webinars. Vanderbilt and ComNet’s business mantra is built on a foundation of customer-focused core values such as empowerment, collaboration, and high performance and Wilks credits this mentality with their ability to keep information flowing to their base during the present pandemic. “The ACRE brands moved early to kick-start online webinars and ramp up awareness of their already existing online training and shopping options. Now more than ever, it is important to keep customers up to date on the latest offerings,” Wilks explains. “Our commitment has always been to make their customer’s security journey the best possible experience, and that is what this Online Events and Learning page primarily focuses on,” he concludes.