RISCO Group Intruder Alarm Control Panels & Systems (49)
LuNAR Green Line DT AM implements Rokonets new "Green Line" concept in response to the recent growth in environmental awareness. The detector effectively eliminates surplus MW radiation during unset periods. LuNAR Green Line DT AM complies with PD6662, EN50131-1 Grade 3 and TS50131-2-4 requirements.Add to Compare
No radiation emission. Restore transmission. Test mode. Low battery transmission. Uses one of 16 million codes without dipswitches. Status transmission every 65 minutes. Back tamper on T32 model. Uses two 2 x 3 volt Lithium batteries (CR123A) for up to 2-year battery life.Add to Compare
The Wireless Smoke Detector is a photoelectric smoke detector for adding fire warning capability to intruder alarm systems. The smoke detector is designed for use in a single residential unit only. When sufficient smoke is detected, the detector will sound its alarm horn and the transmitter will send an alarm message. No radiation emission. Restore transmission. Test mode. Low battery transmission. Uses one of 16 million codes without dipswitches. Status transmission every 15/65 minutes. Cover and back tampers. Uses a 9 volt lithium or alkaline battery.Add to Compare
The Wireless Shock Detector is based on the shock detection technology of the ShockTec wired shock detector. The Wireless Shock Detector comes in the same housing as the Universal Transmitter. Digital Microprocessor with Intelligent Digital Signal Processing. Tri-color LED enables accurate and reliable calibration, with over-sensitive and under-sensitive indications. Gross attack detection. Encapsulated bi-morph piezo electric sensor. Dual stage adjustment potentiometer. Includes 3V long life lithium battery. Fully supervised. Cover & Back Tamper protection. 433 or 868MHz in white or brown housing.Add to Compare
The Wireless Flood Detector provides an alarm in case of flooding above the sensor level. Digital Microprocessor with Intelligent Digital Signal Processing. 2.5m cable between flood sensor and wireless transmitter. Includes 3V long life lithium battery. Fully supervised. Cover & Back Tamper protection. 433 or 868MHz.Add to Compare
Detecting Butane, Propane and Methane (Natural Gas). Loud alarm (85 dB) and signal to the panel when detecting a buildup of gas. Fully supervised device. Test button and continuous self-testing function.Add to Compare
The Wireless CO Detector is a supervised and fully battery powered transmitter that is effective for detecting buildup carbon monoxide (CO). Upon detecting the CO gas, the unit emits an alarm and notifies the control panel. Test button and continuous self-testing function. Designed to meet the requirements of UL Standard 2034. Includes 2 x 3V lithium batteries with 3 year typical lifetime.Add to Compare
Microprocessor-based Digital Signal Processing. Built-in EOL resistors. True Temperature Compensation. Ample wiring space for easy installation. DT models include Tri-colour LED for easy walk test and anti-fluorescent. Interference signal processing. Optional corridor and curtain lenses.Add to Compare
In addition to having all the advantages of the Digital ZoDIAC PIR, the Digital ZoDIAC QUAD includes a real Quad element sensor. The real Quad elements assure improved coverage while reducing significantly false alarms from warm air, moving curtains and spot temperature changes. Microprocessor-based Digital Signal Processing. Patented true temperature compensation. Flexible installation height. Improved false alarm immunity. HIGH RFI Immunity – 25V/M up to 1GHz. Scalable pulse count. White light protection. Optical long range lens. Internal cable duct and ample wiring space.Add to Compare
The Wristband Panic Transmitter is a stylish single button transmitter used to signal a panic alarm in the event of distress. This water-resistant panic transmitter can be worn either on the wrist or as a pendant, and is ideal for the elderly or disabled who might not be able to reach the phone in the event of an emergency. Low battery and transmission LED indication. Includes wristband and necklace cord. Water resistant IP67 rating. Includes lithium battery with a 3-year typical lifetime.Add to Compare
Microprocessor-based Digital Signal Processing. Built-in EOL resistors. True Temperature Compensation. Ample wiring space for easy installation. DT models include Tri-colour LED for easy walk test and anti-fluorescent.Interference signal processing. Optional corridor and curtain lenses.Add to Compare
The IP Module is an easy to add plug-in module that enables the system to communicate over a TCP/IPnetwork. It can be used as the primary communication or as a back up to a GSM/GPRS or PSTN communication in case of communication failure.Add to Compare
Full voice menu guide enables simple remote phone operation. Built-in two way voice communication to the premises. Local announcement and feedback of system status. Family message center. Dedicated buttons for simple emergency notification. Quick key operation of user functions. Full volume control of voice messages and system sounds. Rechargeable batteries, replaceable without opening the unit.Add to Compare
Agility’s flexibility allows selecting any combination of communication modules - IP, GSM/GPRS and fast PSTN - all within the main enclosure. Agility’s flexibility enables selecting different operating options, including a unique 2-Way Remote Control with PIN code protection and a LED that displays the Agility status. Simplified menu logic – only relevant menus are displayed - according to hardware configuration, accessories installed and authorization level. Full installer programming with 2-Way Wireless Keypad. Simple physical installation with wall brackets. Pre-programmed kits with accessories already enrolled in the system (optional). Easy enrollment of wireless accessories without need for keypad. Device ID’s can even be entered from the PC Configuration.Add to Compare
ProSYS.FreeCom is an Integrated Security System that is simple to install, yet has the flexibility and comprehensive set of features to suit any application. The system has an unrivalled dual-path signaling solution with totally integrated IP and GPRS communication from within the main box.The system is modular and expandable, making it possible to install a basic intruder system and add modules and functionality - be it dual-path IP and GSM/GPRS communication, Access Control, Voice Module or Wireless - as customer needs and budget evolve. ProSYS.FreeCom has a proven track record with installations in thousands of organizations, including banks, commercial, retail and public establishments.Installing RISCO Bus Detectors on the ProSYS Bus with Remote Control & Diagnostics saves on cabling, zone expanders, installation time, and on-site maintenance. Up to 128 Bus detectors can be installed on a 4-core alarm cable, eliminating the need to draw cables from the panel or zone expanders to each and every detector, thus saving on labour time. Additionally, RISCO Bus detectors are faster to install than regular detectors, as wiring in the panel is simpler, no EOL resistors are needed, and detection parameters are set remotely. RISCO Bus Detectors also provide major savings on physical zone expanders.ProSYS is available with an elegant Touchscreen Keypad that has a low profile design. Its glass touch screen is extremely responsive, and together with the friendly user interface makes it easier than ever to operate and program the ProSYS. The Touchscreen keypad is available in light and dark colors.Add to Compare
iREX and iREX Plus are intelligent PIR detectors specifically designed for a wide variety of request-to-exit applications. Both iREX and iREX Plus - with IQ Logic™ for added security -meet the most stringent request-to-exit requirements. iREX detectors have ample wiring space and are quick and easy to install. Advanced technology and attention to quality guarantee excellent performance.Add to Compare
The LightSYS Wireless Receiver supports up to 32 wireless zones, 16 rolling code keyfobs and includes two utility outputs. The Receiver can also be used in stand-alone mode, ideal for parking gate control with support for up to 200 keyfobs and 2 outputs.Add to Compare
Professional installers around the globe choose LightSYS™ for their mass-market installations. LightSYS™ Hybrid Security System offers ultimate flexibility, with advanced IP and GSM/GPRS communication as well as your choice of wired, wireless or RISCO Bus detectors.LightSYS main board technologies include plug-in GSM/GPRS and IP modules, remotely upgradeable firmware, and selectable zone resistance.RISCO Bus Technology saves you time and money and increases installation flexibility, while Auto-Install and Bus Test simplify installation and maintenance. Programming via the PC Configuration Software and the LightSYS keypad is enhanced due to an adaptive menu tree - only the relevant options are displayed according to the installed accessories and installer/user authority.Powered by RISCO Group's state-of-the-art technology with a wide range of accessories - LightSYS is your ultimate weapon for conquering small commercial and residential markets.Add to Compare
The RW132KP 2-way Wireless LCD keypad is a modern, streamlined keypad that enables the user to remotely control and operate the Agility security system. Using the modern blue LCD display and the Multi-language support, the system is easy to operate either using the keypad itself or a proximity tag. The keypad can be used for both arming/disarming the system as well as activating home appliances. Other key features: Fully wireless installer programming and end-user operation. Blue LCD and backlight. Up to 3 keypads per system. 2-Button emergency keys. Simple operation for arm/disarm using a proximity tag. Simplified menu logic- displays only relevant menus according to hardware configuration, accessories installed and authorization level. Multilingual support Bracket to wall for easy installation. Double tamper protection. Battery save mode Available in 868MHz and 433MHz. Compatible with RISCO systems: Agility™, Model names: RW132KP, RW132KPP (Including proximity).Add to Compare
The RWT72X one way transmitter is a dual function and cost effective transmitter that combines two separate channels within a single housing and is ideal for wireless perimeter door/window protection in residential and small commercial applications. With two separate channels it can serve two separate applications; perimeter protection for doors and windows when connected to a single channel and shutter pulse protection using the second channel .Add to Compare
Browse Intruder Alarm Control Panels & Systems
- Control Panels & Accessories
- RISCO Group
Intruder alarm system control panel products updated recently
Intrusion alarm systems are currently facing a growing number of potential error sources in the environment. At the same time, alarm systems must comply with increasingly demanding legal requirements for sensors and motion detectors. As a future-proof solution, detectors equipped with Sensor Data Fusion technology raise the level of security while reducing the risk of cost- and time-intensive false alarms. This article provides a comprehensive overview of Sensor Data Fusion technology. Anti-masking alarms A cultural heritage museum in the South of Germany for decades, the installed intrusion alarm system has provided reliable protection on the premises. But suddenly, the detectors trigger false alarms every night after the museum closes. The system integrators are puzzled and conduct extensive tests of the entire system. When they finally identify the culprit, it’s unexpected: As it turns out, the recently installed LED lighting system in the museum’s exhibition spaces radiates at a wavelength that triggers anti-masking alarms in the detectors. Not an easy fix situation, since a new lighting system would prove far too costly. Ultimately, the integrators need to perform extensive detector firmware updates and switch to different sensor architecture to eliminate the error source. This scenario is by no means an isolated incident, but part of a growing trend. Need for reliable detector technology Legal requirements for anti-masking technology are becoming stringent in response to tactics by criminals The number of potential triggers for erroneous alarms in the environment is on the rise. From the perspective of system operators and integrators, it’s a concerning development because every false alarm lowers the credibility of an intrusion alarm system. Not to mention steep costs: Every false call to the authorities comes with a price +$200 tag. Aside from error sources in the environment, legal requirements for anti-masking technology are becoming more stringent in response to ever more resourceful tactics employed by criminals to sidestep detectors. What’s more, today’s detectors need to be fortified against service outages and provide reliable, around-the-clock operability to catch intruders in a timely and reliable fashion. Sensor Data Fusion Technology In light of these demands, one particular approach has emerged as a future-proof solution over the past few years: Sensor Data Fusion technology, the combination of several types of sensors within one detector – designed to cross-check and verify alarm sources via intelligent algorithms – holds the keys to minimizing false alarms and responding appropriately to actual alarm events. This generation of detectors combines passive infrared (PIR) and microwave Doppler radar capabilities with artificial intelligence (AI) to eliminate false alarm sources without sacrificing catch performance. Motion detectors equipped with Sensor Data Fusion technology present a fail-proof solution for building security “It’s not about packing as many sensors as possible into a detector. But it’s about including the most relevant sensors with checks and balances through an intelligent algorithm that verifies the data for a highly reliable level of security. The result is the highest-possible catch performance at the minimum risk for erroneous alarms,” said Michael Reimer, Senior Product Manager at Bosch Security Systems. Motion detectors with sensor data fusion Looking ahead into the future, motion detectors equipped with Sensor Data Fusion technology not only present a fail-proof solution for building security. The comprehensive data collected by these sensors also unlock value beyond security: Constant real-time information on temperature and humidity can be used by intelligent systems and devices in building automation. Integrated into building management systems, the sensors provide efficiency improvements and lowering energy costs Integrated into building management systems, the sensors provide the foundation for efficiency improvements and lowering energy costs in HVAC systems. Companies such as Bosch support these network synergies by constantly developing and optimizing intelligent sensors. On that note, installers must be familiar with the latest generation of sensor technology to upgrade their systems accordingly, starting with a comprehensive overview of error sources in the environment. Prominent false alarm triggers in intrusion alarm systems The following factors emerge as frequent triggers of false alarms in conventional detectors: Strong temperature fluctuations can be interpreted by sensors as indicators of a person inside the building. Triggers range from floor heating sources to strong sunlight. In this context, room temperatures above 86°F (30°C) have proven particularly problematic. Dust contamination of optical detectors lowers the detection performance while raising susceptibility to false alarms. Draft air from air conditioning systems or open windows can trigger motion sensors, especially when curtains, plants, or signage attached to the ceilings (e.g. in grocery stores) are put in motion. Strong light exposure directly on the sensor surface, e.g. caused by headlights from passing vehicles, floodlights, reflected or direct sunlight – all of which sensors may interpret as a flashlight from an intruder. Extensive bandwidth frequencies in Wi-Fi routers can potentially confuse sensors. Only a few years ago, wireless routers operated on a bandwidth of around 2.7GHz while today’s devices often exceed 5GHz, thereby catching older detectors off guard. LED lights radiating at frequencies beyond the spectrum of visible light may trigger sensors with their infrared signals. Regarding the last two points, it’s important to note that legislation provides clear guidelines for the maximum frequency spectrum maintained by Wi-Fi routers and LED lighting. Long-term security But the influx of cheap and illegal products in both product groups – products that do not meet the guidelines – continues to pose problems when installed near conventional detectors. For this reason, Sensor Data Fusion technology provides a reliable solution by verifying alarms with data from several types of sensors within a single detector. Beyond providing immunity from false alarm triggers, the new generation of sensors also needs to comply with the current legislature. These guidelines include the latest EN50131-grade 3, and German VdS class C standards with clear requirements regarding anti-masking technology for detecting sabotage attempts. This is exactly where Sensor Data Fusion technology provides long-term security. Evolution of intrusion detector technology Initially, motion detectors designed for intrusion alarm systems were merely equipped with a single type of sensor; namely passive infrared technology (PIR). Upon their introduction, these sensors raised the overall level of building security tremendously in automated security systems. But over time, these sensors proved limited in their catch performance. As a result, manufacturers began implementing microwave Doppler radar capabilities to cover additional sources of intrusion alarms. First step detection technology In Bosch sensors, engineers added First Step detection to trigger instant alarms upon persons entering a room Over the next few years, sensors were also equipped with sensors detecting visible light to catch flashlights used by burglars, as well as temperature sensors. In Bosch sensors, engineers added proprietary technologies such as First Step detection to trigger instant alarms upon persons entering a room. But experience in the field soon proved, especially due to error sources such as rats and other animals, that comprehensive intrusion detection demands a synergetic approach: A combination of sensors aligned to cross-check one another for a proactive response to incoming signals. At the same time, the aforementioned bandwidth expansion in Wi-Fi routers and LED lighting systems required detectors to implement the latest circuit technology to avoid serving as ‘antennas’ for undesired signals. Sensor data fusion approach At its very core, Sensor Data Fusion technology relies on the centralized collection of all data captured by the variety of different sensors included in a single detector. These data streams are directed to a microprocessor capable of analyzing the signals in real-time via a complex algorithm. This algorithm is the key to Sensor Data Fusion. It enables the detector to balance active sensors and adjust sensitivities as needed, to make truly intelligent decisions regarding whether or not the data indicates a valid alarm condition – and if so, trigger an alarm. Advanced verification mechanisms The current generation of Sensor Data Fusion detectors, for instance from Bosch, feature advanced verification mechanisms, including Microwave Noise Adaptive Processing to easily differentiate humans from false alarm sources (e.g. ceiling fans or hanging signs). For increased reliability, signals from PIR and microwave Doppler radar are compared to determine whether an actual alarm event is taking place. Additionally, the optical chamber is sealed to prevent drafts and insects from affecting the detector, while the detector is programmed for pet and small animal immunity. Sensor cross-verification Further types of sensors embedded in current and future generations of Sensor Data Fusion detectors include MEM-sensors as well as vibration sensors and accelerometers. Ultimately, it’s important to keep in mind that the cross-verification between sensors serves to increase false alarm immunity without sacrificing the catch performance of actual intruders. It merely serves to cover various indicators of intrusion. Protecting UNESCO World Cultural Heritage in China Intelligent detectors equipped with Sensor Data Fusion are protecting historic cultural artifacts in China from theft and damage. At the UNESCO-protected Terracotta Warriors Museum site, one hundred TriTech motion detectors from Bosch with PIR and microwave Doppler radar technology safeguard the invaluable treasures against intruders. To provide comprehensive protection amid the specific demands of the museum site, the detectors have been installed on walls and ceilings to safeguard the 16,300-square-meter museum site. To ensure an optimal visitor experience without interference from glass walls and other barriers, many detectors are mounted at a height of 4.5 meters (15 feet) above ground under the ceiling. Despite their height, the detectors provide accurate data around the clock while exceeding the performance limits of conventional motion detectors, which clock out at a mere 2 meters (6 feet) catchment area. Integrated video systems The site also presents additional error sources such as large amounts of dust that can contaminate the sensors, as well as visitors accidentally dropping their cameras or cellphones next to museum exhibits. To distinguish these events from actual criminal activity, the intrusion alarm system is integrated with the museum’s video security system. This allows for verifying alarm triggers with real-time video footage at a fast pace: In the case of an actual alarm event, the system alerts the on-site security personnel in the control room in less than two seconds. Added value beyond security Sensor Data Fusion technology provides a viable solution for the rising number of error sources in the environment As of today, Sensor Data Fusion technology already provides a viable solution for the rising number of error sources in the environment while providing legally compliant building security against intruders. In light of future developments, operators can leverage significant added value from upgrading existing systems – possibly without fundamentally replacing current system architecture – to the new detector standard. Added value how? On one hand, the detectors can integrate with access control, video security, voice alarm, and analytics for a heightened level of security. These synergetic effects are especially pronounced on end-to-end platforms like the Bosch Building Management system. On the other hand, the data streams from intelligent detectors also supply actionable intelligence to building automation systems, for instance as the basis for efficiency improvements and lowering energy consumption in HVAC systems. New backward-compatible detectors Bosch will release a new series of commercial detectors by end of 2021, based on the latest research on risk factors for false alarm sources in the environment and line with current legislation and safety standards. Throughout these developments, installers can rest assured that all new detectors are fully backward compatible and work with existing networking/architecture. With that said, Sensor Data Fusion technology emerges as the key to more secure intrusion alarm systems today and in the future. TriTech detectors from Bosch For reliable, fail-proof alarms the current series of TriTech detectors from Bosch relies on a combination of different sensor data streams, evaluated by an integrated algorithm. These Sensor Data Fusion detectors from Bosch combine up to five different sensors in a single unit, including: Long-range passive infrared (PIR) sensor Short-range PIR sensor Microwave sensor White light sensor Temperature sensor Equipped with these sensors, TriTech detectors are capable of detecting the most frequent sources of false alarms; from headlights on passing cars to a mouse passing across the room at a 4.5-meter distance to the detector. What’s more, TriTech detectors provide reliable performance at room temperatures above 86°F (30°C) while fully guarding against actual intrusion and sabotage attempts from criminals.
From analog to digital, from stand-alone to interlinked, building systems are in a state of transition. Moreover, the rate of change shows no sign of slowing, which can make it difficult to keep up to date with all the latest developments. If asked to pinpoint the single biggest driver of this revolution, one could point out the growing clamor for platform convergence. A security guard in a building doesn’t want to use different systems to check video cameras, fire alarms or if someone has entered a restricted area: – it simply isn’t efficient. For similar reasons, a building manager wants a single interface to control heating and lighting to match fluctuating occupancy levels, particularly in a hybrid working model. Applying the digital glue The demand from end-users for system convergence is growing, but to achieve full interoperability you still need to apply some ‘digital glue’ and that requires expertise. Yet bringing together disparate systems from different manufacturers can be problematic. Just as you get things to work, someone upgrades their solution and your carefully implemented convergence can start to come unstuck. Managing an implementation can quickly become more complicated, today’s quick-fix can become tomorrow’s headache This is one of the principal issues with all types of new technology; not everyone will choose the same path to reach the desired goal – it’s the old VHS/Betamax argument updated for building management and security systems. Managing and maintaining an implementation can quickly become more complicated than it first appears and without proper oversight, today’s quick-fix can become tomorrow’s technical headache. Effective support for a hybrid workforce Today’s hybrid workforce is a response to the pandemic that looks set to become an established part of working life for many companies across the world. Security systems have a massive role to play in facilitating this transformation that goes beyond simple intrusion detection, access control, and video monitoring. They can identify the most densely populated areas in a building to comply with social distancing guidelines and provide efficient use of space. The insights gathered from a security system can also be used to identify patterns of behavior, which can then be used for planning and directing the use of building space to help create the best possible working environment while also minimizing heating, lighting, and air conditioning expenditures. Identity credentials can help manage compliance with industry regulations by limiting access to certain areas Similarly, identity credentials – either biometric or cellphone-based – can help manage compliance to industry regulations by limiting access to certain areas only to approved employees. Creating and maintaining the appropriate level of functionality requires a combination of innovative solutions and industry experience. The complete security package It’s not just physical security that’s important – cybersecurity is a major focus, too. Bringing together both the physical security and cybersecurity realms is increasingly becoming a ‘must have’ capability. What is evident is that the pace of technological change is faster than ever. Today’s functionality simply wouldn’t have been possible just a few years ago, while today’s leading-edge developments may seem commonplace in five years.
The ‘new normal’ was all we heard about when it came to the working model shift after the pandemic hit. Businesses worldwide adopted working from home, and then the hybrid model: a balance of remote work and office work. And according to a recent survey by 451 Research, nearly 80% of organizations surveyed said they have implemented or expanded universal work-from-home policies as a result of COVID-19, whilst 67% expect these policies to remain in place either permanently or for the long-term. With more vacant office spaces, the question is: is hybrid working a red flag for business security? Empty-Office days When buildings and office spaces are still active with advanced technology, equipment and assets on show, yet footfall is not as busy as it once was, opportunistic criminals are closely watching and taking note. But what are they learning? Security systems provider, Expert Security UK, investigates our new normal. Offices are nests for expensive, valuable equipment, with maybe the latest technology Instead of a packed, busy office five or six days a week, hybrid working means more empty-office days, which is music to the ears of burglars. Offices are nests for expensive, valuable equipment, with maybe the latest technology and safes sitting there, or potential stacks of cash or company cards. You may be thinking, well, who leaves company cards or cash out? You’d be surprised, especially when business owners think they’ll never be a victim, or sometimes, staff make mistakes. Hybrid working model And don’t forget, burglars don’t always know what’s been left and will take their chances. And when a hybrid working model is the ‘new normal’, that means a lapse in security - at least in a thief’s mind. So how worried should business owners be? Well, the latest figures are pretty worrying, but also, not massively shocking. Reiterating the temptation and lure the working model shift has on robbers, Statista recorded a 12-year high for robbery offenses in the UK in 2019/2020. When more businesses either shut up shop or sent staff away to home offices, it’s not hard to make a connection. These figures reflect how, when given the opportunity, thieves will strike and take advantage. Handing vital information Whether you’ve decided to go fully remote, it’s crucial to review and rethink your business security However, it’s worth noting that the lockdowns and empty streets would also have played a part in this spike, and now that we’re out of lockdowns with a world back to flipping its sign to ‘open’, many businesses will be carrying on working from home, but towns, shops, and streets are busy again. Whether you’ve decided to go fully remote, or have adopted the hybrid model, it’s crucial to review and rethink your business security, starting with your social media presence. It’s a good idea to review your social media channels. We forget how open we can be on social media, and how our digital presence can actually work as a perfect guide and insight for criminals. All they have to do is follow your channels to pick up on clues. And if you’re not giving it a minute’s thought about what you're putting out there, you may even be just handing them vital information and helping their plans. Remote working shift Of course, there is information readily available such as your opening times, location etc. But, do you really want/need to show off the new, state-of-the-art tablets you’ve just kitted your office out with? It can be hard as a business, or even as a social person, to not want to share positive news on social media, but we really do have to stop and think, especially if people know a lot about the company and its remote working shift. It’s also a good idea to have a meeting with your staff about a social media policy Maybe share a post about that new, intelligent security system you've installed instead. It’s also a good idea to have a meeting with your staff about a social media policy or maybe just a casual chat about best practices, e.g. not to tag the business in a post about their new office gadget etc. Improving business security With fewer office days, you probably won’t need to take up as much work space anymore. Maybe some equipment has become more ornamental. Anything you don’t use or need, you could sell or donate. If you do have expensive equipment lying around that’s not being used, try and make money back from it or store it elsewhere. If you are keeping a lot of expensive equipment in vacant premises, especially fixed equipment and technology, then consider installing bars and shutters over the windows. Whatever your budget, you can improve your business security tenfold with key security measures. One of them being access control. Security gates with access control are incredibly effective at stopping unauthorized people from gaining entry. There are also car park barriers and bollards that are highly effective at keeping any potential getaway vehicles out. easily portable technology High-quality CCTV is a best friend to any business, but you need to be reviewing it frequently High-quality CCTV is a best friend to any business, but you need to be reviewing it frequently, especially if you’ve done a perimeter check and noticed any signs of forced entry or damage. Don’t forget those signs either, let visitors or trespassers know they’re on camera. To fit in with the hybrid working model, static fixtures are becoming redundant. For instance, companies are switching to laptops instead of computers, so that workers can transport them easily to and from the office. This is not only more efficient and convenient, but it means assets are more guarded. It’s the same for any other gadgets. Having easily portable technology is good for business, hybrid working, and security. Don’t forget about your deterrents. Simple signs to warn people of alarms, CCTV, and even the fact that you don’t leave equipment inside overnight can go a long way. Best security technology Thieves are famous for taking their chances. Some will meticulously plan, and many strike at a convenient, opportune time. So having signs in place that show you have high-quality, intelligent security in place can work wonders, making them think twice. It’s also worth noting that you may not have the best security technology in place at the moment, but those on the outside don’t need to know that; they can be fooled. However, having the best physical security in place is vital, as criminals lurk and will take chances. Keep reviewing your security, especially as your business adapts and reshapes - whether you return back to full office days or carry on the hybrid working model. This guest post was contributed by Danny Scholfield, Managing Director of Expert Security UK.
RISCO will also present its new ProSYS Plus grade 3 hybrid security system for commercial sector at the event RISCO Group, the global integrated security solutions provider, will be presenting a host of exciting new products at IFSEC 2015, stand G1100. SmartHome An extension of RISCO Group’s award-winning Agility 3 and LightSYS 2 intruder alarms, using the advanced iRISCO smartphone app, new ‘SmartHome’ offers homeowners total control of their security, safety and home appliances. RISCO’s powerful video-enabled security solutions combined with their new connected home devices now enables householders to increase their energy efficiency, save money and enjoy control of their home devices and security - using just a single interface. ProSYS Plus - NEW G3 Panel With 512 Zones With the new ProSYS™ Plus grade 3 hybrid security system designed for the commercial sector, RISCO is setting the bar in the security industry. The powerful state-of-the-art solution offers a unique array of benefits, featuring a revolutionary single hardware platform with a unique licensing mechanism - allowing virtually unlimited scalability for any size of installation up to 512 zones. Encompassing the complete spectrum of advanced RISCO technology, the ProSYS™ Plus professional security solution provides: Advanced scalable control panel suitable for any commercial installation, up to 512 zones ‘Super Hybrid’ architecture offering wired, 2-way wireless and RISCO Bus for optimized installation Revolutionary cost-effective licensing model reducing project TCO Cloud-based smartphone app and web interface, enabling remote monitoring anytime, anywhere Full range of professional commercial and industrial detectors, utilizing RISCO’s advanced detection technologies Integrated IP cameras for live HD video verification and remote ‘look in’ via the cloud Fully supported by RISCO’s open architecture command & control PSIM software Beyond™ - NEW Wired And Wireless External Detector A winning combination of dual technology and integrated camera, Beyond™ provides crystal clear visual verification via the monitoring station, iRISCO smartphone app, or web interface A winning combination of dual technology and integrated camera, Beyond™ provides crystal clear visual verification via the monitoring station, iRISCO smartphone app, or web interface. Offering both flexibility and ease of installation, the IP65 rated wireless device features a chargeable auxiliary solar battery for extended battery life. Enhancing Beyond’s performance, false alarms in outdoor environments are drastically reduced via RISCOs’ unique Sway Recognition™ and Digital Correlation™ detection technologies. With Beyond™ you get: Cutting edge wireless DT outdoor detector with an integral high-resolution color camera Crystal clear images for visual alarm verification, day and night Unique solar powered solution enabling close to unlimited battery life Visual Alarm verification via the iRISCO mobile app Minimal false alarm rate due to high detection performance technologies and visual verification capability BWare™ – NEW Wireless Model Added To The State-Of-The-Art Commercial Detector Range In addition to its advanced technology and reliability, BWare™, RISCO Group’s state-of-the-art wired and wireless detector series for professional installations, scores high points for its smart and modern design. Utilizing RISCO’s industry-leading detection technologies, such as Anti-Cloak™ and K-band microwave for improved catch performance, and a unique wireless DT detector with active IR anti mask, the BWare™ series offers a comprehensive array of wired, wireless and Bus detectors. Saving installation time and cost, the BWare™ BUS models can be remotely diagnosed and serviced using the RISCO Bus. The BWare™ series is ideal for a wide range of commercial and high security applications; with Grade 2 and Grade 3 versions. The BWare™ smart detector family provides the flexibility to utilize professional detectors within any installation - wired, wireless or hybrid, while maintaining a uniform look across the site. Now supplied with the CSL DualCom WorldSIM® as standard, visitors to the RISCO stand can view the full range of award-winning panels, and HandyApp, on the ‘Innovation Trail’. In addition, visitors to the show can see Steve Riley presenting VUpoint, as part of the Benchmark Innovation Awards, at 11:30am on Tuesday 16th June in the Benchmark arena.
The Innovation Trail will allow visitors to navigate all the newest products and services from across the security industry Innovation is the key theme at this year’s IFSEC International, taking place from 16-18 June at ExCeL London. The annual security gathering will host the Benchmark Innovation Awards along with the launch of the new Innovation Arena. In addition to this, the Innovation Trail returns for its second year. Innovation Trail - Latest Products and Services Organizers of IFSEC International have polled their exhibitors to discover all the latest trends and innovations that will be on display, the Innovation Trail will allow visitors to navigate all the newest products and services from across the security industry that have launched this year. Highlights of the IFSEC International Innovation Trail include the NICE Suspect Search, a patent-pending video analytics tool that quickly locates and retraces the movements of a suspect, lost child, or other person of interest within a video surveillance network. Video footage from different cameras and time frames can be reviewed in just minutes, as the system automatically filters out 95 percent of irrelevant images. In addition to achieving faster response times, organizations are able to restore normal operations quicker following a security breach. RISCO To Exhibit Its HandyApp The RISCO HandyApp is the first smartphone application dedicated to supporting the sales and installation activities of professional security installers. The app allows installers working with RISCO products to increase their efficiency and sales potential by providing access to everything they need for a smooth installation. Through the app, installers can gain access to manuals, use power consumption calculators and even share user guides or sales materials with customers or colleagues. Installers can also extend product warranties and seamlessly open a service request by phone or email through the dedicated support area. Arecont Vision At The Event "We are delighted to incorporate the Innovation Trail once again and we have some really exciting products and technology to showcase this year" IFSEC International will also be displaying the latest in camera systems including Arecont Vision next generation panoramic cameras, the 5MP SurroundVideo® with Arecont Vision®’s proprietary STELLAR™ Low Light Technology, and the 12MP SurroundVideo® with Wide Dynamic Range (WDR). Both panoramic cameras also feature motorized lenses for easy set-up, and over a 50% increase in frame rate versus current SurroundVideo® cameras. Engtex AB will showcase its highly advanced textile Avertic Armour, developed from the No. 1 chainsaw protective textile, Avertic Pro+. This warp-knitted textile uses the world´s strongest fiber designed to withstand break-in attempts when heavy duty tools are used. Smanos To Launch K1 Finally, Smanos launch K1, the ultimate home automation and security center combining butler and guard functions into a stack of aesthetically pleasing round discs. The discs come with aluminum frames and texturized plastic surfaces, suitable for everyday use. This smart home technology uses intuitive operation, gesture-based password protection and self-learning capability to ensure the connected home is both affordable and easy to use. IFSEC, Event Director Comments Gerry Dunphy, event director- IFSEC International states: “Following our move in 2014 to London’s ExCeL we conducted a significant amount of research and one of the key themes that kept coming up is everyone wanted to see genuine innovation on the show floor. We are delighted to incorporate the Innovation Trail once again and we have some really exciting products and technology to showcase this year. With so many new products within the Innovation Trail, IFSEC International really will provide a one-stop shop for our installer community to get their hands on the latest technology.” All these new products, plus many more, will make up this year’s Innovation Trail at IFSEC International 2015, helping visitors to easily access the new technologies that have come to market. Visitors will also be able to speak to leading suppliers that are shaking up the industry with new services, experts will be on hand to answer any questions and demo all the latest products on their stands.
RISCO Group’s SynopSYS platform provides real time pictures of all branches from one interface Comverse is a leading multinational provider of telecommunications software and systems, with numerous branches worldwide. Comverse required an integrated management platform to control and monitor all of their branches from the company headquarters. The Challenge Comverse’s many branches around the world vary in size and operating hours. Many contain sensitive areas such as labs, warehouses, and IT rooms. Comverse’s largest site is the company headquarters, spanning 55,000 square meters. The headquarters houses two data centers, which are considered to be the most sensitive areas in all of Comverse worldwide. Comverse required a solution that would enable them to secure and monitor all of the branches from the global security control center located in their headquarters. The solution would have to support the simple integration of a variety of security systems. Another requirement was that the solution be based on TCP/IP communication. The most important consideration for Comverse was the reliability of the solution. The Solution Comverse chose RISCO Group’s ProSYS Integrated Security System as the solution that met all requirements. In 2006, ProSYS was initially installed in seven branches, each panel communicating via IP. ProSYS’ IP module enables simultaneous multiple channel TCP/IP communication, and works via secure communication with a full SSL stack using AES256 bit encryption. Following the successful installation of ProSYS in the first seven branches, Comverse’s Director for Corporate Security & EHS, Guy Dafna, called ProSYS a ‘global standard,’ and has since extended the system to all branches worldwide. In 2009, Comverse chose RISCO Group’s SynopSYS Integrated Security & Building Management platform with Integrated Video to control and monitor Comverse’s scattered branches. The installation is led by Comverse Corporate Security, who are gradually rolling out the platform to all branches. The Platform provides an overall picture of all the branches in real time, from one intuitive user interface located in the company headquarters and displays all building and rooms. SynopSYS Integrated Security & Building Management displays all buildings and rooms in the sites on synoptic maps. Highlights ProSYS Integrated Security System is installed in Comverse’s branches worldwide, communicating via IP. ProSYS was selected for its simplicity and flexibility. SynopSYS Integrated Security & Building Management Platform enables control and management of all the company’s branches from the headquarters via a single and intuitive user interface. SynopSYS Integrated Security & Building Management Platform is extremely flexible, its open platform allowing for easy integration not only with ProSYS, but also with video monitoring, intrusion, and fire systems, as well as HVAC, lighting, and elevator control. The Customer’s Point of View Comverse was pleased with the open platform that makes it easy to build unique projects, and is scalable according to the company’s future needs. They particularly valued the system’s flexibility, ease of use, and wide range of features. Comverse’s Corporate Security Director Guy Dafna noted, “Based on my experience working with many security systems, I can surely say that it looks like we’re on the good and safe track with RISCO’s solutions.”
Related white papers
Security Investments Retailers Should Consider For Their 2021 Budget
Charting The Path To Safe CitiesDownload
Assessing the Total Cost of Ownership (TCO) of VMS and NVR SystemsDownload
Securing Unmanned Infrastructure at the Network EdgeDownload
Providing Frictionless Cloud Video Storage as a Service (VSaaS)Download
- Hochiki Comes Top Of Class At Two Educational Settings In Darlington
- Genetec Provides Security Center With The Omnicast Video Surveillance Solution At The Groupama Stadium In France
- RAS Watch Enhances Security For A Law Firm In California By Providing Them Security Solutions And Training Their Staff
- Securiteam Designs Commercial Intrusion Solution For A Fortune 500 Company