Dedicated Micros Security Camera Mounts

  Ergonomics are a critical, but often misunderstood aspect of designing control rooms for security. Ergonomics have a deep impact on the integrity of an operation, and the issue goes beyond the control room furniture. Matko Papic, Chief Technology Officer of Evans Consoles, divides ergonomics into three areas: physical (reach zones, touch points, monitors); cognitive (the individual’s ability to process information without overlooking a critical element) and organizational (how the facility operates in various situations; e.g., is it adequately designed for an emergency event?). He says the Evans approach is to determine the precise placement required for each element an operator needs, and then to design and build console furniture to position it there. Basically, the idea is to tailor the control room to the operation. What tasks must an operator perform? Are they manageable or should they be divided up among several operators? Control room design should accommodate the need to collaborate, and be flexible enough to adapt to various situations. It all begins with understanding the information that needs to be processed, says Papic. Increased Productivity In The Workplace Because personnel are often stationed at a specific console, desk or workstation for long hours, physical problems and productivity issues can result, says Jim Coleman, National Sales Manager, AFC Industries. Ergonomically designed furniture and related products have been proven to increase productivity and alleviate physical stress in the workplace. Ergonomic furniture solutions are crafted for the ultimate in safety, adaptability, comfort and functionality. Coleman says AFC Industries can tailor furniture to specific needs and environment. For example, a height-adjustable workstation can be combined with adjustable monitor arm mounts to create a relaxed, comfortable environment. Furniture offers modern designs, comfortable ergonomics, and comprehensive features. Rugged materials withstand the 24/7 use of command control centers. Health Benefits Of Ergonomic Workstations A sedentary office environment is often an unhealthy one. “For people who sit most of the day, their risk of heart attack is about the same as smoking,” says Martha Grogan, Cardiologist at the Mayo Clinic. Ongoing research and studies have shown that a change in posture (i.e., using ergonomic sit-to-stand workstations) is an effective means to combat these negative health issues. Using sit-to-stand workstations helps to eliminate musculoskeletal disorders caused by long-term sitting. They can also improve productivity and focus from the increased blood flow. Energy levels can rise and employees burn more calories. Control room design should accommodate the need to collaborate and be flexible enough to adapt to various situations “The ergonomic environment we create for control rooms involves considering every need of the staff at each workstation and their equipment, as well as workflow within the entire room,” says Coleman. “From the proper setting of screen focal lengths to sound absorption and glare reduction, each requirement and phase of a control room design is a necessary process to ensure the protection and safety of people and property.” Emergency Operations Center “The military has figured out that you are more alert when you are standing,” says Randy Smith, President of Winsted, and the realization is guiding emergency operations center (EOC) design toward sit-stand. “As soon as there is an emergency, everybody stands up,” Smith adds. Designing EOC environments also requires systems be integrated with annunciating signal lights to facilitate communication among operators. Winsted’s sit-stand consoles can be combined with a motorized M-View monitor wall mount, enabling a 60-inch wall monitor to be raised and lowered to match the positioning of the sit-stand console. Larger, wall-mounted screens are easier to use for operators, since a larger monitor size can make it easier to read text on a screen, for example. Combining the larger monitor with sit-stand capabilities provides the best of both options. Many operators today stand for 50 percent of their day, says Smith. Ergonomic standards guide the design of Winsted’s control room consoles, including ISO 11064 standards for the design of control centers. The furniture also is designed to accommodate industrial wire management (larger wire bundles), unlike furniture that might be bought in an office supply store. Read part 3 of our Control Rooms series here {##Poll37 - How well do you incorporate ergonomics into your control rooms?##}

Endless possibilities for security deployment have been made possible with technological advancements Significant technological advancements have created endless possibilities in how security is not only deployed, but also leveraged by the end user – the customer. For example, customers can now view surveillance at eight different offices in eight different states from a single, central location. A security director can manage an enterprise-wide access control system, including revoking or granting access control privileges, for 10,000 global employees from the company’s headquarters in Chicago. However, with that increased level of system sophistication comes an added level of complexity. After successfully completing the installation of a security system, integrators are now expected to formally and contractually prove that the system works as outlined in the project specification document. Tom Feilen, Director of National Accounts for Koorsen Security Technology explains that this formal checks and balance process is gaining momentum in the security industry. The step-by-step process of Acceptance Testing is more commonly being written into bid specifications, especially for projects that require the expertise of an engineer and/or architect. Simply put, it is a way for the end user to make sure the system they paid for works properly and is delivered by the integrator as outlined in the project’s request for proposal. While Acceptance Testing can be a time consuming process, it is a valuable industry tool. It is estimated that at least 95 percent of integrated security systems today have been brought through the Acceptance Testing process. Security systems have become more complicated in recent years. The introduction of IP-based, enterprise-wide and integrated solutions have all opened the door to more sophisticated access control and surveillance systems than ever thought possible. This process can vary depending upon the size of the project, but for a larger scale project, it is not uncommon for Acceptance Testing to take several weeks from start to finish. This timeline can be especially lengthy when the project involves hundreds of devices, such as access control readers, surveillance cameras, video recorders, intrusion sensors, and intercom systems. Most integrated security systems today have been brought through the Acceptance Testing process What is involved in the Acceptance Testing process? While the specific process can vary from integrator to integrator, many follow a similar process with their customer to ensure the system works accurately and that the customer has the proper certification documentation. The initial part of the process typically involves generating a report of each device installed as part of the system. This list enables the systems integrator to systematically test each device ensuring that individual devices are not specific points of failure for the overall system. For example, in a building equipped with a system that automatically releases the egress doors upon the fire alarm activation, it is important to make sure each door’s electro-magnetic locking system is operating properly. The systems integrator would not only test that a door releases when the fire alarm sounds, but also to make sure the access control system is notified if the door is propped open or held open longer than in normal usage parameters. For a door that is also monitored by a surveillance camera, part of the testing would also involve making sure that an image being transmitted to a video monitor is coming from the correct surveillance camera and that the actual angle of the image is what the customer has requested and is correctly labeled as such. If a device does not function as it should, it is then added to a punch list that would require the systems integrator to repair that device within a certain period of time. Once repairs are made, the system integrator would then submit a letter to the client stating that every device has been tested and works properly. It is also important for the integrator that once the testing process is complete to obtain a customer sign off (Certificate of Acceptance) on all systems tested and documentation provided. This limits liability once the system is turned over. From a safety perspective, Acceptance Testing is also used to verify that T-bars and safety chains are installed on cameras that are mounted in drop ceilings. It can confirm that panels are mounted in a room that is properly heated and cooled to avoid major temperature swings. Also, as part of the Acceptance Testing checklist, it can insure that power supplies that drive all the security systems are properly rated with the recommended batteries for back-up. And, that emergency exist devices or card readers are not mounted more than 48-inches above ground. An Acceptance Testing process serves to protect the end user's investment After the project is complete, Acceptance Testing protects both parties involved against liability issues. One example is if the building has a fire and the functionality of the life safety system comes into question. Acceptance Testing can be used to prove that the system was able to function as specified and dispel any concerns about its performance. At that time, all close out sheets are turned in, along with as-built drawings and a manual providing a complete listing of each device and system installed. Today, these manuals not only come in paper form as part of a large binder, but also digital files saved to a disc. The benefit of providing the customer with a binder or documentation of the system is that should the end user/customer replace the person who manages security at the company, valuable information will not leave with that former employee. While this checklist to close out a project may appear trivial at first, it is an important part of the security project process. By implementing an Acceptance Testing program, it serves to protect the end user’s investment, ensuring that the systems integrators hired for the project is knowledgeable and provides quality work. For the integrator, it helps towards the end goal of a satisfied customer.

The new CA3000 software provides robust access control functionality and seamless integration with alarms ContinentalAccess, a division of Napco Security Technologies, Inc., has recently released new CA3000 version 2.9 software, that not only provides robust access control functionality and seamless integration with alarms, locking and a growing list of video systems, but offers a host of many new sought-after features including; the ability to run the CardAccess 3000 and associated applications as Windows services and the ability to control access to the CardAccess GUI using Lightweight Directory Access Protocol (LDAP). Support for the Continental’s new and robust Super-Speed 16 door Accelaterm controller is also available. Plus, more video integration partners have been added to their growing list, now including Pelco, HiTron, Milestone, Dedicated Micros, as well as Salient & Integral. New CA3000 v2.9 also includes many enhancements to the existing features, providing the front-end of Napco Fusion; it is the complete seamless interoperable solution for Gemini intrusion & fire systems, access control, video and wireless locks. The CardAccess 3000 version 2.9 software also provides additional support for sister division, Alarm Lock’s Trilogy Networx locks, now in both cylindrical and mortise models, with the utilization of a Door position contact and Request to Exit (RTE) button feature. Continental offers training classes across the country and free online webinars, as well as retrofit rebate programs and cost-saving software upgrade plans. See us at ISC West Booth #12043, Las Vegas, NV, April 2- 4.

Mark has over 20 years of experience in the both security and broadcast arenas Keyscan Access Control Systems is pleased to announce Mark Playdon has joined Keyscan as Regional Sales Manager, Southeast US covering North Carolina, South Carolina and Georgia. “It is a pleasure to welcome Mark to his new role with Keyscan,” said Steve Dentinger, Keyscan’s Director of Sales and Marketing. “Mark brings a wealth of security and technology experience to our organisation. I am confident he will continue to support Keyscan’s efforts and drive continued growth for the Keyscan brand throughout the Southeast region of the United States.” Mark joins Keyscan with more than 20 years’ experience working with technology based manufacturers in both the Security and Broadcast arenas. Most recently mark has worked with both JVC Profession Security Division and Dedicated Micros. Heading up their Eastern Regional Sales Divisions Mark was successful in developing sales growth through the development and management of effective sales channels. Prior to working in the Security industry Mark spent 15 years in broadcast equipment sales working for top companies including JVC, Vinten and Fast Forward Video, all manufacturer of high end broadcast equipment. Mark grew through the ranks beginning his career as a Broadcast Systems Installation engineer before moving to Design and then Sales. As Global Sales Director at Fast Forward Video Mark was instrumental in the continued and solid sales growth of the company’s product in new territories and countries though out the world. Mark also served in the British Royal Air Force studying engineering before beginning his career in the broadcast and security industries.

With this move, CheckMySystems aims to bring the software to an international audience CheckMySystems - the CCTV health and operation monitoring software specialist - has signed-up electronic security product provider IPX360 Solutions to act as its agent for 'CheckMyCCTV' in the North American market. This is a major step forward in CheckMySystems' desire to bring the software to an international audience following its successful UK launch. The CheckMyCCTV application, to be offered by IPX360 Solutions across the US and Canada, is designed to automatically identify and report specific video surveillance system faults as soon as they are detected. Typical issues that can be flagged-up by CheckMyCCTV include: camera failures, hard disk failures, recording issues, time accuracy problems, and network connection failures. Early detection helps to ensure that problems are resolved before they can impact, negatively, on system performance. Following the landmark deal announced recently, IPX360 Solutions is planning to preview CheckMyCCTV's advanced capabilities in a series of one-to-one meetings with security distributors and monitoring station representatives at the Security Canada Expo taking place in Toronto, Canada. The 'soft launch' of CheckMyCCTV is to be followed by the 'official' North American unveiling of the video surveillance health check software on IPX360 Solution's booth (219) during the SecureTech event (Ottawa - October 30, 31). Moving ahead, IPX360 Solutions sees tremendous potential in targeting CheckMyCCTV at American and Canadian security distributors and owners of large-scale and multiple sites. Central stations are another focus, where interest has already been expressed in CheckMyCCTV by providers, given its ability to enhance the efficiency of their operations and, crucially, the system status information that can be provided to customers. "We are very excited to be working with IPX360 Solutions Inc. in our efforts to bring CheckMyCCTV to new customers in North America.." Regis Glorieux, President of IPX360 Solutions, explains what attracted him to the CheckMyCCTV solution: "In my view there is a real need for a new approach to checking on video surveillance systems in the US and Canada. When working with, and for distributors, I regularly came across recorders that were simply not working and may have been out of action for weeks or even longer. I am certainly not alone in this. "Often the first time the customer realised anything was amiss was when there was an incident and they couldn't retrieve the video. With CheckMyCCTV in place these problems are picked-up automatically, and highlighted by an on-screen warning at a monitoring station or even via a smart phone 'app', so no one needs to be left in the dark. "Another factor which is very appealing, and differentiates CheckMyCCTV from less capable solutions, is the ability of the software to work with multiple video surveillance system brands. Traditionally, such solutions have tended to be very much manufacturer specific. This isn't very practical for customers who want to avoid the headache of trying to run four or five pieces of software simultaneously. Now with CheckMyCCTV they can access a single, convenient interface for all important status checking." Commented Darren Rewston, Founder and Managing Director of CheckMySystems Ltd: "We are very excited to be working with IPX360 Solutions Inc. in our efforts to bring CheckMyCCTV to new customers in North America. The experience we have had to date in the UK, working with monitoring stations, large retailers and other users, shows that CheckMyCCTV can make a positive difference to fault finding and how the maintenance of video surveillance systems is managed. We expect that customers in the US and Canada will soon appreciate these practical benefits for themselves. "At CheckMySystems we realize that there can be no room for complacency where the well being of video surveillance systems are concerned. The need to implement effective checks was underlined in a snapshot survey we conducted of 300 sites across the UK. Before CheckMyCCTV was implemented a worrying 75% of sites had one or more issues affecting the operational performance of the CCTV system, ranging from daylight saving time not being updated, to camera failures, recording problems, and hard disk issues." CheckMyCCTV is currently compatible with over 25 video surveillance system brands and OEMs, including: Samsung, Costar, HikVision, American Dynamics, Dedicated Micros, Xtralis, and Dahua, with more being added to this list all the time.