IDIS Video Surveillance Camera Lenses(2)
Browse Video Surveillance Camera Lenses
Security camera lens products updated recently
According to IHS Market, it is estimated that there are over 60 million security cameras in the United States, and other reports say these cameras capture more than four billion hours of footage per week. Over the last decade, IP camera technology has dominated the conversation as it has provided users with a broad offering of enhanced image quality and features. With a large percentage of existing security systems relying on analog, many end users looking for high definition (HD) video quality have been forced to take on a complete system overhaul. Infrastructure Overhaul For HD Video To make the switch, customers would need to change everything, from cameras to hardware to wiring– not to mention the lengthy installation process that would ensue. IP cameras also require higher Internet speeds and more cloud space. Whether constrained by budget, bandwidth or storage, many end users have been unable to adopt this new video surveillance method.Thanks to technological advancements within the security industry, HD over Coax offers a viable solution for integrators and end users alike Thanks to technological advancements within the security industry, HD over Coax offers a viable solution for integrators and end users alike. By utilising the current Coaxial cables, this offering yields high definition video, while requiring minimal infrastructure changes and is an optimal surveillance choice for security customers. Plus, with new advancements and updates being made frequently to this technology, there is a solution for every security need. The enhanced alternative of HD over Coax has been warmly welcomed in the security industry, thanks to its simple solutions and ever-evolving features. Many new analog HD cameras are “plug and play,” able to connect directly to existing Coaxial cables. This eliminates the need for a complete system change, creating cost-savings for the end user and an enhanced video quality offering. Easy Solutions For HD Video As a result, integrators can cost-effectively upgrade their customer’s surveillance solution while using their legacy infrastructure, making it an attractive option for end users and an easy sell for dealers. Latency in video is another common issue with network-based camera systems, where even the slightest delay in video surveillance can hinder security response HD over Coax cameras themselves are always expanding and evolving to meet a wide array of security needs. With the introduction of fisheye and multi-sensor cameras, users now have a multitude of coverage options, not to mention the introduction of 4K bringing resolution options to the same level as IP. Some newer technologies are even touting 4K cameras paired with 4K digital video recorders (DVRs) made specifically for analog systems. Longer cables grant transmission for up to 1600 feet, double the distance of standard analog solutions, and triple that of IP systems. This single cable is able to transmit both HD video and audio. Recently, broadcast quality audio over Coax has become available in limited models, a substantial improvement over older analog technology, which was unable to transmit audio. Stopping Video Delay Latency in video is another common issue with network-based camera systems. Even the slightest delay in video surveillance can hinder security response. IP cameras are forced to compress and packetize their video for transmission. The outcome of this is a reduced number of images per video, which in turn causes delay. HD over Coax on the other hand, delivers an unlimited amount of HD images in real time, with smooth motion and impressive clarity. Additionally, the point-to-point transmission delivers uncompressed video free of lag. Another touted benefit is that, unlike IP networked cameras, analog systems provide a more secure video transmission. With so much sensitive information housed on a businesses’ network, adding another point of network access through an IP camera can create concerns for cyber security risks. HD over Coax delivers an unlimited amount of HD images in real time, with smooth motion and impressive clarity Preventing Network Hacking With HD over Coax, the physical connections between the camera and DVR prevent network hacking. By keeping the video surveillance system offline, security professionals are able to direct their attention to the physical threats at hand, rather than having to focus on deterring cyber security risks. One of the primary difficulties of deploying HD video solutions is the fact that many older systems utilize a wide variety of HD standards and platforms. To make matters more complicated, after HD over Coax was brought to market, manufacturers raced to create their own version of this technology. Today, the most popular proprietary standards are HD-CVI, HD-TVI and AHD. However, integrators and customers found that attempting to manage multiple HD technologies proved to be near impossible.Integrators and customers found that attempting to manage multiple HD technologies proved to be near impossible Diversifying Surveillance Through One DVR To combat these issues, manufacturers have introduced products with more flexibility to their portfolios. One example of this is the penta-brid DVR which grants the ability to seamlessly integrate multiple technologies deployed across one application. This means that systems with diverse camera brands and technologies, such as a mix of HD-CVI, HD-TVI, AHD, analog or IP, can be connected through one DVR. For many end users with legacy analog systems, penta-brid DVRs give them greater freedom to choose between a variety of solutions, rather than being limited to one option. With video resolution increasing, the space needed to store the footage is similarly rising. Penta-brid technology has been able to adapt to these evolving needs, giving users ample storage space to house the HD and 4K surveillance video with some of the newest models including H.265 compression. HD Casino Surveillance Made Simple For casinos, HD images are critical for identifying unauthorized personnel and unlawful behaviours to create a safe environment for guests and staff While HD over Coax is beneficial to many end users and integrators, those in the casino and hospitality markets find it crucial. With a combination of high profile guests, large amounts of cash on hand, constant crowds and strict industry regulations, reliable video surveillance is a must. Deploying new IP systems comes at a stiff price. When looking to upgrade their video surveillance, casinos must also be mindful of the installation process. When moving to an IP-based system, ripping out old wires and replacing them with new is the standard practice. This practice can be both disruptive and costly, not to mention gaming regulations require casino activities be monitored at all times so a complete system shutdown would result in revenue loss. This cost can be hard to justify, especially when the current legacy analog system remains in working condition with only the lower image resolution to date it. For these scenarios, the most cost-effective option is to leverage the legacy infrastructure, replace the existing cameras with new devices, and reap the benefits that HD video has to offer without any lapse in security. For casinos, HD images are critical for identifying unauthorized personnel and unlawful behaviours to create a safe environment for guests and staff. HD over Coax cameras now offer the same resolution as IP cameras with a plug and play approach, that cuts down on expense without sacrificing quality. For businesses and applications that are unable to adopt IP technology, whether it be cost or time prohibitive, HD over Coax now features most of the same benefits IP has to offer without breaking the bank. By providing clear images in real time, maximizing existing infrastructure, and affording cyber security benefits, HD over Coax provides an attractive solution for many end users and integrators.
When people think of control rooms, images from James Bond movies or intense action stories come to mind. What they fail to realise is the incredible level of ergonomics, technology, precision and craftsmanship required to create a top-notch command and control room. “These are rooms of complex functionalities, where hundreds of elements must be integrated and function in sync,” says Jim Coleman, National Sales Manager, AFC Industries. Professional teams from several different industries must coordinate every single detail in order to ensure that functionality occurs each and every time. Reconfigurable Furniture For Control Rooms AFC Industries is one company that specialises in equipping control rooms for security and other applications. AFC Industries was established in 1994 as a family-owned business that focuses on the design and construction of ergonomic products. Their height-adjustable units guarantee the right height for standing desks as well as traditional sitting levels. The company produces an array of Command and Control ergonomic security consoles and mounting solutions. Modular racking systems facilitate efficient storage of electronic and audio-visual equipment. As technology changes, older traditional consoles are no longer a necessity. Many organizations instead are choosing to use lighter, less costly, reconfigurable furniture that allows more flexibility. Command Centers need to be able to reconfigure the space at will. Because most systems are housed in secure data centers, users should be able to quickly move their positions by relocating their workstations, utilising different network connections. Simple control room features, like those addressing lighting or operator comfort, can make the difference in a correct or incorrect decision during a crisis Emergency Operations Centers A positive trend driving the market for control rooms is an increase in emergency operations centers (EOCs), says Randy Smith, President of Winsted. “Everybody is concerned about what happens in an emergency,” says Smith, and the centers are popping up as a tool for emergency preparedness. It’s another environment where sit-stand work stations are the rule. Winsted’s product lines include stock modular and customized elements in good-better-best categories – from basic to lots of “bells and whistles;” jobs can be configured from modular elements or customized as needed. Customized Control Rooms For Seamless Operation There is a lot at stake in control room design: Lives can depend on how effectively a control room functions in an emergency. Control rooms should seamlessly accommodate both everyday occurrences and crisis situations, says Matko Papic, Chief Technology Officer of Evans Consoles. Better-operating control rooms can increase efficiency and reduce and/or mitigate risk. Simple control room features, like those addressing lighting or operator comfort, can make the difference in a correct or incorrect decision during a crisis. Addressing operator comfort can reduce the possibility of workers’ compensation claims. End users are seeing multiple benefits of creating a better operating environment, better sightlines, more comfort and attention to ergonomics. As a fully integrated control room solutions provider, Evans Consoles approaches the needs of a control room environment beginning in the conceptual/operational planning stage. They consider broad issues such as how information will be processed, the interface between technology and operators, and the cognitive and physical interactions of operators – understanding that these factors drive the layout and function of control rooms. After analyzing tasks to be performed in the environment, Evans lays out the consoles to meet those needs. Rather than a predesigned solution, each installation is tailored around a specific application. Read part 2 of our Control Rooms series here
Many end-users shell out the cash to acquire the newest high-end devices, plug in, and expect to be wowed A well-developed surveillance system can give a single security guard the power to see what otherwise might take a hundred pairs of eyes to see. But what happens when all the components are all connected and powered up, and the resulting image on the screen is, well, indiscernible, or, at the very least, terribly pixelated? Many end-users shell out the cash to acquire the newest high-end devices, plug in, and expect to be wowed. Often enough, however, what they see on the screen is not what they were expecting – and they wonder what they just paid for. In a good high-definition system, what factors actually create the best image quality? With so many variables involved, from the camera’s lens to the imaging algorithms to the monitor resolution – just to name the obvious ones – how do system integrators achieve the best on-screen images? The Lens The first component to handle light from an object, this may be the one most taken for granted in cameras of any sort. (Just try scratching or cracking one and you’ll agree.) In the days of analog cameras, it seemed that any old lens would do just fine. However, as the technology inside cameras evolved and more powerful sensors (more pixels) became available, engineers and programmers demanded more from lenses. Moreover, intelligent video content analyses would be impossible without high-accuracy lenses.In what way do lenses impact the image quality? The key factor here is light transmission. The quality of light passing through the lens itself will forever be critical to the quality of image reproduced. A lens made using ultra-precision molding aspherical technology achieves more accurate color, better light, and clearer images. Multilayer broadband anti-reflection coating further maximises a lens's light transmission while minimizing the residual reflection of light on the surface of each optical lens. Variables involved include the camera’s lens, the imaging algorithms and the monitor resolution When it comes to fabricating a megapixel lens that hits the mark, the materials used and the processes by which lenses are produced are the two most critical criteria. The materials most often used to create lenses are glass and specialized plastics. An HD lens made of ultra-low-dispersion optical glass – which, by using dispersion characteristics that are different from those of conventional optical glass – will deliver better HD performance. Machine-automated lens production using specialized plastics results in high output for camera producers, and the lenses produced are more uniform in design and quality. For an HD vari-focal lens, its image quality depends largely on the precision of the cam. The cam rotates to drive the zoom and focus lens groups forward and backward for a smooth continuity of focal length and adjustment of the focal point. A lack of precision with the cam inevitably causes an offset or tilt of the lens' optical axis during zooming and focusing, leading to a serious loss of image quality. Lens production is a delicate balancing act. The slightest errors or imperfections will be very noticeable when tested Lens production is a delicate balancing act. The slightest errors or imperfections will be very noticeable when tested. The features of a lens that affect image resolution, clarity, and contrast must be perfect. Achieving uniformity of image resolution at the center and the edges of a lens requires high-precision machinery. And once a lens has been properly crafted, the assembly of the camera, the lens housing materials, and the alignment of the optical axis demand utmost accuracy. To put it mildly, quality control must be rigorous. Image Signal Processing As light passes through the lens, the sensor captures it and converts it to data. Raw RGB data is transmitted by the camera sensor and undergoes Image Signal Processing (ISP) such as noise reduction, white balance, WDR, curve correction and color correction, etc. The data is then transformed to true colors for each pixel point, for people to see images that look “normal” to the human eye. It is the Image Signal Processing that defines the final image quality on the screen. Collecting data in different conditions is vital, for instance, outdoor data should be analyzed with natural light on days with sun, overcast, rain, and fog, at dawn, at dusk, and so on. Similarly, when using cameras equipped with infrared sensors, testing the IR light signals in various conditions is necessary as well. Actual image performance depends upon variables such as low light illumination, signal to noise ratio, dynamic range of light, and more. ISP algorithms aim at increasing the signal data and decreasing noise. Cameras with Wide Dynamic Range (WDR) will yield improved video imaging with both background and foreground objects in high contrast or high-backlight environments, maximising the amount of detail in brighter and darker areas in one field-of-view. In scenes with low contrast and low light, the sensors deliver digital image signals and at the same time send some amount of digital noise that directly hinders image clarity. Three-dimensional digital noise reduction (3D DNR) removes unwanted artifacts from an image, reducing graininess. Where cloudy weather poses a challenge, auto-defogging technology helps to identify the density of fog or rain with gray-white color ratio analysis, and imbues images with true color reproduction. Ramping up the megapixels and frame rates yields great video, but also results in more bandwidth used and more storage occupied Matching Megapixels To Image Quality When the factors mentioned above line up well, correlating cameras and monitors creates the best viewing experience. When a high definition camera is in place, a monitor with a high resolution will display images much more clearly. But if the monitor’s resolution is low, it will not deliver the high-quality images expected – or possible – from that HD camera. For an 8 MP camera, for instance, users do best to apply monitors with 4K × 2K resolution. Though common sense, this deserves to be mentioned because users might decide to upgrade their systems with 4K monitors, but with perhaps 1.3 MP cameras installed. In such a scenario, there’s no guarantee the on-screen image quality will automatically improve. Managing Data And Bandwidth In terms of a complete, high definition surveillance system, when the right factors come together and the calibrations are set, image quality – even in a standard HD 1080p setup – can be extremely good. The final piece of the puzzle is managing the data. Ramping up the megapixels and frame rates yields great video, but also results in more bandwidth used and more storage occupied. Squeezing bandwidth threatens image quality and clarity, but keeping ample room for signal transmission and storage will eventually increase the overall cost for customers. Is it possible for integrators to optimize their customer’s system and, at the same time, stay within budget constraints? Luckily, it can be done. Squeezing bandwidth threatens image quality and clarity, but keeping ample room for signal transmission and storage increases the overall cost for customers To do this, a more efficient video encoding solution would allow an improvement in compression efficiency of 40–50% over H.264. Improvements to algorithms that are adaptive to a particular scene give users control over bitrate. Another option would be to start recording video only when an event triggers an alarm, since most security guards are primarily concerned with moving objects rather than a scene’s generally stagnant background. This intelligently helps optimize bandwidth and storage consumption. Another method is to use a single panoramic or fisheye camera in place of several HD cameras for coverage – the reduced number of security devices will reduce bandwidth demands and the rate of storage consumption as well. Getting The Best Image Quality Now let’s put this all together. Naturally, integrators and users will refer to their product specs to understand features and functions, fine-tuning each component for best results. Also, as suggested above, users should select an HD camera comprehensively in terms of lens performance, pixels, image quality, and overall system compatibility and performance. Next, matching the backend device and management platform should be carefully considered in a complete security system. Installing equipment that has been engineered for a given scene is a must, along with strategising how to get the most coverage out of the lowest number of cameras. Finally, product quality, warranty, price, and on-going customer service are all important factors that customers should take into account as well.
The experience of high-quality, high-performance automotive engineering and the sleek lines and signature beauty of luxury auto brands like Porsche, BMW, Mercedes, and more are investments worth protecting. When damage to these vehicles occurs and body work is required, only the work of attentive, highly trained, and craftsman technicians owners can trust, will do. Phoenix-area Autobahn Collision serves the region’s owners of luxury European automobiles with precisely such expertise they can trust, and when the time came to upgrade the premier body shop’s security infrastructure, they looked for a surveillance solution able to meet the same high standards of performance they meet every day. Seamless Integration Autobahn Collision provides customers with a service and repair experience, well-crafted to be as high-end, responsive, and trustworthy as the luxury vehicles they work on. The body shop’s expectations were no less for their surveillance solution, which needed to seamlessly integrate new and existing technologies in a way that was both easy to use and maintain, allowing for monitoring and documentation, as needed, without distracting from the team members core priority: optimising customer experiences and quality body work for their customers.Scottsdale based integrator SARC Monitoring answered Autobahn’s call with an upgraded virtual guarding solution DirectIP NVR Surveillance Solution Scottsdale based integrator SARC Monitoring answered Autobahn’s call with an upgraded virtual guarding solution with IDIS DirectIP network video recorders (NVRs) at the heart, addressing all issues of compatibility and operational concerns. IDIS NVRs, specifically designed to reduce (if not eliminate) compatibility issues, support multiple industry standards and 3rd party protocols. At Autobahn Collision, SARC integrated multiple IDIS DR-8364(F) NVRs in designing a user-friendly surveillance solution that enhanced and fully supporting the shop’s existing IP camera infrastructure. IDIS DR-8364(F) series of NVRs The IDIS DR-8364(F) series of NVRs have multiple features that enhance the overall ease-of-use and maintainability. The DR-8364(F) supports 64 IP channels of 4K UHD with a maximum incoming throughput of 900Mbps, which means fewer NVRs are needed to support a large installation of cameras. Fewer devices reduce the overall complexity of any solution, by definition, and mean less time spent on installation and maintenance. The intuitive DR-8364(F) NVR interface, common to all IDIS products, also means that training and transition investment is minimized. IDIS’s license free software model, which also includes free software updates, further minimizes the cost and complexity of owning and maintaining an IDIS solution. Enhanced protection for luxury vehicles The upgraded solution allows Autobahn Collision and a team of remote monitors to keep the premises—and the concentration of luxury vehicles, parts, and accessories—secure 24 hours a day / 7 days a week, enabled by the enhanced recording, storage, and failover benefits of the IDIS DirectIP NVRs and IDIS’s modular IDIS Solution Suite VMS. Data can be transferred on existing cabling and saved in existing storage space The IDIS DirectIP DR-8364 NVR’s support for H.265 with IDIS Intelligent Codec and Motion Adaptive Transmission (MAT) reduces the need for additional bandwidth and storage upgrades, providing up to a 90% reduction in both bandwidth and storage utilization. IDIS SmartFailover Additional data can be transferred on existing cabling and saved in existing storage space. Multi-layered data protection through IDIS SmartFailover features include RAID 5 storage redundancy, dual power supply redundancy, and NVR failover, which provides support for a standby NVR that continually monitors the primary NVR (taking over recording if the primary hardware fails). IDIS SmartFailover ensures that data integrity and system operation are automatically monitored and maintained, simplifying system support and maintenance tasks. Real-time monitoring, playback and review, high-quality imagery for reference and documentation purposes, and more are now seamlessly empowered by the new system, allowing Autobahn to continue doing what it does best of all, meeting and exceeding the needs of the region’s most discerning vehicle owners.
Bluebird House is a specialist UK inpatient facility, providing treatment and care for young people with complex mental health problems which mean they pose a risk to themselves or others. Run by Southern Health NHS Foundation Trust, the center also houses adolescents detained under the Mental Health Act, so the highest standards of care, protection and security are required. As part of a wider review of security and safety across the trust, Bluebird House was earmarked for a comprehensive video surveillance upgrade and IDIS technology was chosen as the best-fit for this major project. Providing comprehensive coverage All IDIS equipment uses true plug-and-play set up, which minimizes disruption and disturbance to patients Galeco engineers installed 110 IDIS 12MP Super Fisheye cameras in communal and therapeutic areas inside the facility and over 40 bullets and 13 PTZ cameras cover the exterior. All the cameras are connected to six 32-channel NVRs and managed via IDIS Center video management software (VMS). All IDIS equipment uses true plug-and-play set up, which minimizes disruption and disturbance to patients, while protection against gaps in footage is provided by IDIS Smart Failover ensuring 24/7 continued recording even during network instability or drop-out. Implemented across three secure wards and two high care units, the 12MP IR Super Fisheyes provide comprehensive coverage much more affordably than two or more fixed lens cameras. Advanced IDIS video capture technology delivers complete high-definition scene coverage in all lighting conditions and allows staff to de-warp in live view as well as playback. Automatic object detection The 5MP bullet cameras, deployed around the building exteriors provide coverage of gardens, courtyards and car parks. IR LED that allows night-time image capture at distances up to 30m and includes intelligent functions such as active tampering alarms and trip zones and will notify the security team to any breach. Each camera is set to perform virtual guard tours at specific times throughout the day and night IDIS 31x Zoom IR PTZ cameras are installed along the perimeter to provide clear night-time image capture at distances up to 200m. Each camera is set to perform virtual guard tours at specific times throughout the day and night. Featuring automatic object detection, the cameras recognize and automatically track objects, people or cars capturing useful footage and alert operators of any suspicious activity. To meet patient privacy requirements, access to live and recorded footage, is limited to staff according to their ward and role. Access to advanced features and functionality Staff can only view and review footage from their area of responsibility at designated monitoring stations using specialist IDIS monitors designed for high-performance surveillance operations. To meet future requirements, the new IDIS solution can be linked to the trust’s local area networks (LANs) without increasing cyber- security concerns, thanks to IDIS’s use of proprietary software which is inherently resilient. The totally cost-free IDIS Center video management software (VMS) gives security managers and senior staff a complete overview of the entire site from a 24/7 manned and centralized control room. Using the intuitive IDIS Center interface, operators have complete command and control of each camera and access to advanced features and functionality to ensure the secure and smooth day-to-day running of the site. Authorized monitoring and access of footage IDIS technology made this easy, and it was also the quickest and least disruptive to install Video surveillance is a key resource for clinicians, Sr. managers and security staff at Bluebird House as they need to work closely together to deal with incidents and reduce risks of harm. Improved video coverage was needed as it would allow ongoing review of care standards and full investigation of any alleged incidents. Patient privacy is also of paramount importance, so specialist integrator Galeco Communications was selected to implement a solution that would allow authorized monitoring and access of footage for specific rooms and wards. IDIS technology made this easy, and it was also the quickest and least disruptive to install, the most secure against cyber-attacks - in compliance with NHS requirements – and yet would deliver the lowest total cost of ownership (TCO). Ensuring better safety and security Replacing the centre’s aging camera system, the IDIS solution would give complete coverage of corridors, wards and other high-risk areas in all lighting conditions. The IDIS solution has improved security, safety and care at Bluebird House by providing a complete video record of events. Exterior cameras ensure better safety and security in outdoor communal areas Footage from the 12MP Super Fisheye cameras give a full 360 view without any blind spots with a choice of 6 view modes and crucially provides staff with the ability to de-warp footage retrospectively. Now, if incidents need to be investigated it’s a simple task to retrieve video and provide any high-definition evidence required. Exterior cameras ensure better safety and security in outdoor communal areas, while security operators can quickly detect and respond to any suspicious activity on the perimeter. Access and review recordings "A key benefit for us is that this new system is so easy to use, and particularly for our clinical staff who can now access and review recordings to help them improve patient care. This video technology gives us extra confidence that our patients and staff are safe and protected” said Tracey Edwards, Head of Security at Southern Health NHS Trust. With minimal disruption, and working in this sensitive location, Galeco engineers were able to replace an outdated system with an affordable, high-performance, cybersecure solution that is easy to maintain and operate without any ongoing license fees.
IDIS has teamed up with integration partner ISD Tech to support the Men’s Shed community group in Church Crookham and Fleet with the donation of a state-of-the-art video monitoring solution. The donation is part of the IDIS ‘Create a Better World” campaign that has run on company’s social media channels since the start of the year to support a global commitment to enhance safety and security for social welfare projects and non-profit community organizations. The system, supplied and installed for free, is protecting a fully equipped new workshop, built with National Lottery funding and opened on the 22nd September 2019. IDIS NVRs, IP bullet cameras and domes with IR capability, now provide 24/7 video coverage of the new facility, inside and out, helping to protect high value power tools and other equipment. “The workshop is in quite a secluded location and it houses high value items, so it needs watching over out-of-hours,” explains Nicky Stokes, MD of ISD Tech. Video solution “We were delighted to provide this IDIS video solution to enable the volunteers who manage the site to receive alerts on their phones, and to view footage, if ever there’s an attempted intrusion or problem with vandalism.” The Church Crookham and Fleet Men’s Shed, is one of more than 520 across the UK helping to reduce isolation, particularly among older men, and supporting them as they contribute their knowledge and practical skills to local good causes – everything from building library shelves for primary schools, to making bird boxes for conservation groups, says Chairman Alan Walker. Research has warned about the negative impact of loneliness and isolation on health and wellbeing “We have 25 regularly active ‘shedders’ meeting twice a week and, as that number grows, we’ll increase the times that our workshop’ is open. Now, instead of just being old blokes tinkering away in isolation, we can have a joke and work together – in many ways it replicates the working environment." For a long time, research has warned about the negative impact of loneliness and isolation on health and wellbeing, with millions of people reporting feeling lonely on a daily basis. Video surveillance equipment Men’s Sheds have emerged as a practical way of tackling the problem, particularly for older men who find it more difficult to build social connections – although the organization welcomes members of all ages and genders. Group members meet to work on projects – fixing things, making things – to share tips and simply to enjoy each other’s company. Alan Walker, says more than 45 projects have already been completed by the group, and thanks to the IDIS video solution, both the ongoing work and the tools can be stored safely out-of-hours while the workshop is unoccupied. IDIS is Korea’s pioneer in-country video surveillance equipment manufacturer and, as it continues to expand in markets globally, the company is committed to supporting community initiatives and charity work, particularly efforts focused on mental health and wellbeing. “We were really pleased to help Men’s Shed with our video technology,” explains Jamie Barnfield, Sales Director, IDIS Europe. "This is a great community group, not only concerned with the wellbeing of their own members but also supporting the wider community around them with the projects they work on.” Surveillance technology James Min, Managing Director, IDIS Europe, noted: “Since IDIS was founded over two decades ago our corporate mission has been to develop technology that makes the world a safer and more secure place. And while we have witnessed giant leaps forward in surveillance technology, our ‘Create a Better World’ campaign is leveraging those innovations to benefit charitable causes that are close to the hearts of local staff as well as close to our facilities around the world.”
Nine Ways To Make Your Retail Security System Work HarderDownload
Financial Institutions Require Future-Ready Physical Security TechnologiesDownload
Understanding The Trade-Off Between Image Resolution And Field Of ViewDownload
- Siklu’s Radios Deployed In The City Of Cambridge To Provide Outdoor Video Security
- Hikvision’s IP Video Surveillance System Used To Upgrade Security At London’s Kew Gardens
- Hanwha Techwin’s Wisenet cameras and NVRs provides safety for patients at the Norfolk and Suffolk NHS Foundation Trust
- Hanwha Techwin Video Surveillance Solutions Watch Houston's GreenStreet Entertainment Sector