Arecont Vision Video Surveillance Camera Lenses(29)
Browse Video Surveillance Camera Lenses
Security camera lens products updated recently
According to IHS Market, it is estimated that there are over 60 million security cameras in the United States, and other reports say these cameras capture more than four billion hours of footage per week. Over the last decade, IP camera technology has dominated the conversation as it has provided users with a broad offering of enhanced image quality and features. With a large percentage of existing security systems relying on analog, many end users looking for high definition (HD) video quality have been forced to take on a complete system overhaul. Infrastructure Overhaul For HD Video To make the switch, customers would need to change everything, from cameras to hardware to wiring– not to mention the lengthy installation process that would ensue. IP cameras also require higher Internet speeds and more cloud space. Whether constrained by budget, bandwidth or storage, many end users have been unable to adopt this new video surveillance method.Thanks to technological advancements within the security industry, HD over Coax offers a viable solution for integrators and end users alike Thanks to technological advancements within the security industry, HD over Coax offers a viable solution for integrators and end users alike. By utilising the current Coaxial cables, this offering yields high definition video, while requiring minimal infrastructure changes and is an optimal surveillance choice for security customers. Plus, with new advancements and updates being made frequently to this technology, there is a solution for every security need. The enhanced alternative of HD over Coax has been warmly welcomed in the security industry, thanks to its simple solutions and ever-evolving features. Many new analog HD cameras are “plug and play,” able to connect directly to existing Coaxial cables. This eliminates the need for a complete system change, creating cost-savings for the end user and an enhanced video quality offering. Easy Solutions For HD Video As a result, integrators can cost-effectively upgrade their customer’s surveillance solution while using their legacy infrastructure, making it an attractive option for end users and an easy sell for dealers. Latency in video is another common issue with network-based camera systems, where even the slightest delay in video surveillance can hinder security response HD over Coax cameras themselves are always expanding and evolving to meet a wide array of security needs. With the introduction of fisheye and multi-sensor cameras, users now have a multitude of coverage options, not to mention the introduction of 4K bringing resolution options to the same level as IP. Some newer technologies are even touting 4K cameras paired with 4K digital video recorders (DVRs) made specifically for analog systems. Longer cables grant transmission for up to 1600 feet, double the distance of standard analog solutions, and triple that of IP systems. This single cable is able to transmit both HD video and audio. Recently, broadcast quality audio over Coax has become available in limited models, a substantial improvement over older analog technology, which was unable to transmit audio. Stopping Video Delay Latency in video is another common issue with network-based camera systems. Even the slightest delay in video surveillance can hinder security response. IP cameras are forced to compress and packetize their video for transmission. The outcome of this is a reduced number of images per video, which in turn causes delay. HD over Coax on the other hand, delivers an unlimited amount of HD images in real time, with smooth motion and impressive clarity. Additionally, the point-to-point transmission delivers uncompressed video free of lag. Another touted benefit is that, unlike IP networked cameras, analog systems provide a more secure video transmission. With so much sensitive information housed on a businesses’ network, adding another point of network access through an IP camera can create concerns for cyber security risks. HD over Coax delivers an unlimited amount of HD images in real time, with smooth motion and impressive clarity Preventing Network Hacking With HD over Coax, the physical connections between the camera and DVR prevent network hacking. By keeping the video surveillance system offline, security professionals are able to direct their attention to the physical threats at hand, rather than having to focus on deterring cyber security risks. One of the primary difficulties of deploying HD video solutions is the fact that many older systems utilize a wide variety of HD standards and platforms. To make matters more complicated, after HD over Coax was brought to market, manufacturers raced to create their own version of this technology. Today, the most popular proprietary standards are HD-CVI, HD-TVI and AHD. However, integrators and customers found that attempting to manage multiple HD technologies proved to be near impossible.Integrators and customers found that attempting to manage multiple HD technologies proved to be near impossible Diversifying Surveillance Through One DVR To combat these issues, manufacturers have introduced products with more flexibility to their portfolios. One example of this is the penta-brid DVR which grants the ability to seamlessly integrate multiple technologies deployed across one application. This means that systems with diverse camera brands and technologies, such as a mix of HD-CVI, HD-TVI, AHD, analog or IP, can be connected through one DVR. For many end users with legacy analog systems, penta-brid DVRs give them greater freedom to choose between a variety of solutions, rather than being limited to one option. With video resolution increasing, the space needed to store the footage is similarly rising. Penta-brid technology has been able to adapt to these evolving needs, giving users ample storage space to house the HD and 4K surveillance video with some of the newest models including H.265 compression. HD Casino Surveillance Made Simple For casinos, HD images are critical for identifying unauthorized personnel and unlawful behaviours to create a safe environment for guests and staff While HD over Coax is beneficial to many end users and integrators, those in the casino and hospitality markets find it crucial. With a combination of high profile guests, large amounts of cash on hand, constant crowds and strict industry regulations, reliable video surveillance is a must. Deploying new IP systems comes at a stiff price. When looking to upgrade their video surveillance, casinos must also be mindful of the installation process. When moving to an IP-based system, ripping out old wires and replacing them with new is the standard practice. This practice can be both disruptive and costly, not to mention gaming regulations require casino activities be monitored at all times so a complete system shutdown would result in revenue loss. This cost can be hard to justify, especially when the current legacy analog system remains in working condition with only the lower image resolution to date it. For these scenarios, the most cost-effective option is to leverage the legacy infrastructure, replace the existing cameras with new devices, and reap the benefits that HD video has to offer without any lapse in security. For casinos, HD images are critical for identifying unauthorized personnel and unlawful behaviours to create a safe environment for guests and staff. HD over Coax cameras now offer the same resolution as IP cameras with a plug and play approach, that cuts down on expense without sacrificing quality. For businesses and applications that are unable to adopt IP technology, whether it be cost or time prohibitive, HD over Coax now features most of the same benefits IP has to offer without breaking the bank. By providing clear images in real time, maximizing existing infrastructure, and affording cyber security benefits, HD over Coax provides an attractive solution for many end users and integrators.
When people think of control rooms, images from James Bond movies or intense action stories come to mind. What they fail to realise is the incredible level of ergonomics, technology, precision and craftsmanship required to create a top-notch command and control room. “These are rooms of complex functionalities, where hundreds of elements must be integrated and function in sync,” says Jim Coleman, National Sales Manager, AFC Industries. Professional teams from several different industries must coordinate every single detail in order to ensure that functionality occurs each and every time. Reconfigurable Furniture For Control Rooms AFC Industries is one company that specialises in equipping control rooms for security and other applications. AFC Industries was established in 1994 as a family-owned business that focuses on the design and construction of ergonomic products. Their height-adjustable units guarantee the right height for standing desks as well as traditional sitting levels. The company produces an array of Command and Control ergonomic security consoles and mounting solutions. Modular racking systems facilitate efficient storage of electronic and audio-visual equipment. As technology changes, older traditional consoles are no longer a necessity. Many organizations instead are choosing to use lighter, less costly, reconfigurable furniture that allows more flexibility. Command Centers need to be able to reconfigure the space at will. Because most systems are housed in secure data centers, users should be able to quickly move their positions by relocating their workstations, utilising different network connections. Simple control room features, like those addressing lighting or operator comfort, can make the difference in a correct or incorrect decision during a crisis Emergency Operations Centers A positive trend driving the market for control rooms is an increase in emergency operations centers (EOCs), says Randy Smith, President of Winsted. “Everybody is concerned about what happens in an emergency,” says Smith, and the centers are popping up as a tool for emergency preparedness. It’s another environment where sit-stand work stations are the rule. Winsted’s product lines include stock modular and customized elements in good-better-best categories – from basic to lots of “bells and whistles;” jobs can be configured from modular elements or customized as needed. Customized Control Rooms For Seamless Operation There is a lot at stake in control room design: Lives can depend on how effectively a control room functions in an emergency. Control rooms should seamlessly accommodate both everyday occurrences and crisis situations, says Matko Papic, Chief Technology Officer of Evans Consoles. Better-operating control rooms can increase efficiency and reduce and/or mitigate risk. Simple control room features, like those addressing lighting or operator comfort, can make the difference in a correct or incorrect decision during a crisis. Addressing operator comfort can reduce the possibility of workers’ compensation claims. End users are seeing multiple benefits of creating a better operating environment, better sightlines, more comfort and attention to ergonomics. As a fully integrated control room solutions provider, Evans Consoles approaches the needs of a control room environment beginning in the conceptual/operational planning stage. They consider broad issues such as how information will be processed, the interface between technology and operators, and the cognitive and physical interactions of operators – understanding that these factors drive the layout and function of control rooms. After analyzing tasks to be performed in the environment, Evans lays out the consoles to meet those needs. Rather than a predesigned solution, each installation is tailored around a specific application. Read part 2 of our Control Rooms series here
Many end-users shell out the cash to acquire the newest high-end devices, plug in, and expect to be wowed A well-developed surveillance system can give a single security guard the power to see what otherwise might take a hundred pairs of eyes to see. But what happens when all the components are all connected and powered up, and the resulting image on the screen is, well, indiscernible, or, at the very least, terribly pixelated? Many end-users shell out the cash to acquire the newest high-end devices, plug in, and expect to be wowed. Often enough, however, what they see on the screen is not what they were expecting – and they wonder what they just paid for. In a good high-definition system, what factors actually create the best image quality? With so many variables involved, from the camera’s lens to the imaging algorithms to the monitor resolution – just to name the obvious ones – how do system integrators achieve the best on-screen images? The Lens The first component to handle light from an object, this may be the one most taken for granted in cameras of any sort. (Just try scratching or cracking one and you’ll agree.) In the days of analog cameras, it seemed that any old lens would do just fine. However, as the technology inside cameras evolved and more powerful sensors (more pixels) became available, engineers and programmers demanded more from lenses. Moreover, intelligent video content analyses would be impossible without high-accuracy lenses.In what way do lenses impact the image quality? The key factor here is light transmission. The quality of light passing through the lens itself will forever be critical to the quality of image reproduced. A lens made using ultra-precision molding aspherical technology achieves more accurate color, better light, and clearer images. Multilayer broadband anti-reflection coating further maximises a lens's light transmission while minimizing the residual reflection of light on the surface of each optical lens. Variables involved include the camera’s lens, the imaging algorithms and the monitor resolution When it comes to fabricating a megapixel lens that hits the mark, the materials used and the processes by which lenses are produced are the two most critical criteria. The materials most often used to create lenses are glass and specialized plastics. An HD lens made of ultra-low-dispersion optical glass – which, by using dispersion characteristics that are different from those of conventional optical glass – will deliver better HD performance. Machine-automated lens production using specialized plastics results in high output for camera producers, and the lenses produced are more uniform in design and quality. For an HD vari-focal lens, its image quality depends largely on the precision of the cam. The cam rotates to drive the zoom and focus lens groups forward and backward for a smooth continuity of focal length and adjustment of the focal point. A lack of precision with the cam inevitably causes an offset or tilt of the lens' optical axis during zooming and focusing, leading to a serious loss of image quality. Lens production is a delicate balancing act. The slightest errors or imperfections will be very noticeable when tested Lens production is a delicate balancing act. The slightest errors or imperfections will be very noticeable when tested. The features of a lens that affect image resolution, clarity, and contrast must be perfect. Achieving uniformity of image resolution at the center and the edges of a lens requires high-precision machinery. And once a lens has been properly crafted, the assembly of the camera, the lens housing materials, and the alignment of the optical axis demand utmost accuracy. To put it mildly, quality control must be rigorous. Image Signal Processing As light passes through the lens, the sensor captures it and converts it to data. Raw RGB data is transmitted by the camera sensor and undergoes Image Signal Processing (ISP) such as noise reduction, white balance, WDR, curve correction and color correction, etc. The data is then transformed to true colors for each pixel point, for people to see images that look “normal” to the human eye. It is the Image Signal Processing that defines the final image quality on the screen. Collecting data in different conditions is vital, for instance, outdoor data should be analyzed with natural light on days with sun, overcast, rain, and fog, at dawn, at dusk, and so on. Similarly, when using cameras equipped with infrared sensors, testing the IR light signals in various conditions is necessary as well. Actual image performance depends upon variables such as low light illumination, signal to noise ratio, dynamic range of light, and more. ISP algorithms aim at increasing the signal data and decreasing noise. Cameras with Wide Dynamic Range (WDR) will yield improved video imaging with both background and foreground objects in high contrast or high-backlight environments, maximising the amount of detail in brighter and darker areas in one field-of-view. In scenes with low contrast and low light, the sensors deliver digital image signals and at the same time send some amount of digital noise that directly hinders image clarity. Three-dimensional digital noise reduction (3D DNR) removes unwanted artifacts from an image, reducing graininess. Where cloudy weather poses a challenge, auto-defogging technology helps to identify the density of fog or rain with gray-white color ratio analysis, and imbues images with true color reproduction. Ramping up the megapixels and frame rates yields great video, but also results in more bandwidth used and more storage occupied Matching Megapixels To Image Quality When the factors mentioned above line up well, correlating cameras and monitors creates the best viewing experience. When a high definition camera is in place, a monitor with a high resolution will display images much more clearly. But if the monitor’s resolution is low, it will not deliver the high-quality images expected – or possible – from that HD camera. For an 8 MP camera, for instance, users do best to apply monitors with 4K × 2K resolution. Though common sense, this deserves to be mentioned because users might decide to upgrade their systems with 4K monitors, but with perhaps 1.3 MP cameras installed. In such a scenario, there’s no guarantee the on-screen image quality will automatically improve. Managing Data And Bandwidth In terms of a complete, high definition surveillance system, when the right factors come together and the calibrations are set, image quality – even in a standard HD 1080p setup – can be extremely good. The final piece of the puzzle is managing the data. Ramping up the megapixels and frame rates yields great video, but also results in more bandwidth used and more storage occupied. Squeezing bandwidth threatens image quality and clarity, but keeping ample room for signal transmission and storage will eventually increase the overall cost for customers. Is it possible for integrators to optimize their customer’s system and, at the same time, stay within budget constraints? Luckily, it can be done. Squeezing bandwidth threatens image quality and clarity, but keeping ample room for signal transmission and storage increases the overall cost for customers To do this, a more efficient video encoding solution would allow an improvement in compression efficiency of 40–50% over H.264. Improvements to algorithms that are adaptive to a particular scene give users control over bitrate. Another option would be to start recording video only when an event triggers an alarm, since most security guards are primarily concerned with moving objects rather than a scene’s generally stagnant background. This intelligently helps optimize bandwidth and storage consumption. Another method is to use a single panoramic or fisheye camera in place of several HD cameras for coverage – the reduced number of security devices will reduce bandwidth demands and the rate of storage consumption as well. Getting The Best Image Quality Now let’s put this all together. Naturally, integrators and users will refer to their product specs to understand features and functions, fine-tuning each component for best results. Also, as suggested above, users should select an HD camera comprehensively in terms of lens performance, pixels, image quality, and overall system compatibility and performance. Next, matching the backend device and management platform should be carefully considered in a complete security system. Installing equipment that has been engineered for a given scene is a must, along with strategising how to get the most coverage out of the lowest number of cameras. Finally, product quality, warranty, price, and on-going customer service are all important factors that customers should take into account as well.
There are a handful of amazing things that set San Francisco apart from other global cities. Notably, there is the Golden Gate Bridge, Alcatraz Island, Fisherman’s Wharf and Chinatown, the Twin Peaks overlooking the city skyline, San Francisco Bay, and The Moscone Center. Just how does a convention center fit into the list of places to see in beautiful San Francisco? It is the largest convention and exhibition complex in San Francisco, California. It includes three main halls spread out across three blocks and 87 acres in the prime South of Market neighborhood. The convention center originally opened in 1981 and has gone through several renovations. It is currently upgrading its security system to reflect a modern, state-of-the-art security solution. Securing SMG/Moscone Center Security at the SMG/Moscone Center is handled similar to the security at a Tier 1 airport. However, clients who use the facility are required to provide their own inside security. When the doors of the convention Center are open to the public, it plays host to people who want to come in and look around. Our new security system will provide analytics, and the ability to look at the images in real time" “We are responsible for facility security inside and on the perimeter outside. This is considered a soft target, so we do everything possible to harden the security,” said Damion Ellis, Director of Security at the SMG/Moscone Center. Damion adds, “The time is right for us to take out the old security system, including the old analog camera system. Our new security system will provide analytics, and the ability to look at the images in real time.” IP cameras installed for wide surveillance Like any major metropolitan area, the San Francisco metropolitan region has its own issues that have to be dealt with that aren’t pleasant. This includes keeping track of the homeless population and what they are doing. Damion Ellis further said, “We are able to place the new IP cameras in places where the homeless population congregates on the outside, in dark corners of the facility.” CompleteView VMS video platform The Moscone Center complex consists of three main halls. Moscone South is located to the south of Howard Street and is three-story tall. It opened in 2017, replacing the original Moscone Center building that opened in 1981. A Keith Haring sculpture stands outside the hall at the corner of 5th and Howard streets. Moscone North is located to the north of Howard Street, and Moscone West is a three-level exhibition hall located across 4th Street from Moscone North. Integration with ProWatch access control platform “One of the most compelling reasons Moscone deployed CompleteView video platform was the integration with Honeywell’s ProWatch access control platform, as well as newly designed multi-sensor cameras,” said Salient’s Regional Sales Manager in the Bay Area, Cindy Doyle. Cindy adds, “The ease of use and intuitive software allowed the guard staff to use maps in the system to identify where triggered events took place for guard dispatch.” Monitoring door alarms Prowatch access control platform is currently being used to monitor door alarms throughout the property Prowatch access control platform is currently being used to monitor door alarms throughout the property and triggering video call-up and/or alarm video event when there is a forced or held open door. In order to keep track of outside foot traffic and provide interior and exterior security, an analytics option was foremost on everyone’s mind, and integrator Microbiz Security Co., dove in with an initial site survey to determine the best course of action. Microbiz has partnered with the SMG/Moscone Center for several years. Video analytics solution “Our goal was to take a look at what it would take to secure the facility, but to do it properly,” said Todd Chritton, President of Microbiz Security. “The integrator had some suggestions in terms of offering better security coverage in some areas,” said Marco Escobar, Vice President of Operations at Microbiz Security, adding “What they knew was three buildings needed to update from its current 2002 technology, and upgrade to 2018 technology. It also was beneficial to the integrator having worked on site for several years and also having worked with Ellis during his tenure with the Hilton Hotel chain.” Multi-sensor and multi-megapixel IP cameras Marco Escober further stated, “We’ve been a long-time vendor at the convention center, and we offer a pride of installation as well as using the best of the best security solutions. We began by updating current cameras to Arecont Vision multi-sensor and multi-megapixel IP cameras and Salient Systems’ CompleteView VMS, Dellintegrated server with RAID6 configuration and CompleteView Enterprise software." He adds, "The VMS is a fully open architecture, enabling convention center security staff to seamlessly leverage existing technology investments and minimize disruption.”
Arecont Vision Costar (AV Costar), a globally renowned IP-based megapixel camera technology and video surveillance solutions provider, has unveiled multiple high performance cameras for the ConteraIP megapixel (MP) series. The four new models build upon the high performance, superior image quality, outstanding reliability, ease of installation, and competitive pricing that are the hallmarks of ConteraIP. “We’ve taken the most in-demand form factors from our proven MegaIP single, dual, and multi-sensor camera families to bring similar choices to our expanding ConteraIP series,” said Brad Donaldson, Vice President of Product Development at Arecont Vision Costar. “ConteraIP will now address an even wider variety of challenging customer requirements as these new NDAA-compliant cameras roll out in coming weeks.” ConteraIP MicroDome LX cameras Indoor models feature a built-in microphone, while the outdoor MicroDome LX includes integrated IR illuminators The newly unveiled ConteraIP MicroDome LX IP cameras offer customers the choice of indoor ultra-low profile flush mount models for discreet surveillance or compact surface mount versions for indoor/outdoor use. Indoor models feature a built-in microphone, while the outdoor MicroDome LX includes integrated IR illuminators. All MicroDome LX cameras deliver up to 30fps of megapixel video and include a motorized remote focus lens for rapid setup, with choice of 1080p (2.1MP) or 5MP resolution. The new ConteraIP MicroDome Duo LX offers twin, independent domes with motorized remote focus lens, each capable of up to 30fps of megapixel video. The Duo is ideal for indoor/outdoor applications such as coverage of hallways, walkways, and corners, or for monitoring ATMs or POS terminals where a 4-sensor Omni or panoramic camera may not be suitable. The compact platform brings models with 4 (2x1080p), 10 (2x5MP), or 16 (2x8MP) MP resolution choices, each with twin remote focus motorized lenses. ConteraIP Omni LX cameras AV Costar continues to build upon its legacy of surveillance industry leadership in adjustable-view multi-sensor models with the unveiling of the new ConteraIP Omni LX. The highly flexible remote-focus camera series offers 4 high resolution megapixel sensors with motorized remote focus lenses for easy installation and setup. Omni LX offers the choice of 8 (4x1080p) or 20 (4x5MP) megapixel resolution with the customer’s choice of interchangeable lenses. Each sensor can be adjusted to the perfect individual view then remotely focused. The Omni LX delivers up to 360-degrees of non-stop coverage of virtually any scene for complete situational awareness. The Omni LX reduces complexity and cost, using a single PoE IP cable, IP address, and VMS license (on most VMS systems) instead of multiples of each being required for individual single-sensor cameras. NightView low light technology and H.265 compression ConteraIP cameras offer enhanced WDR up to 120db for varied lighting conditions, NightView low light technology, and H.265 with SnapStream+ & M-JPEG support. Other common features are high frame rates, defog technology, on screen display, MicroSD card support (most models), and multi-streaming capability. Just as in the entire MegaIP camera family, all four of the new ConteraIP models include both NDAA (National Defense Authorization Act H. R. 2500) and ONVIF compliance, plus are IP66 environmental and IK10 impact resistance rated. 360-degree Fisheye Panoramic and multi-sensor cameras Existing ConteraIP models include compact single sensor 360-degree Fisheye Panoramic cameras With the addition of these newest megapixel models, the ConteraIP camera series covers an even wider range of video surveillance and security system needs for a wide range of applications. Existing ConteraIP models include the compact single sensor 360-degree Fisheye Panoramic cameras with built-in microphone and two award-winning multi-sensor cameras - the 4-sensor 180-degree Panoramic with integrated IR and the Omni LX Remote Setup, which features 4 remotely positioned and focused motorized sensors for the ultimate ease of installation and configuration with non-stop surveillance across up to 360 degrees of coverage. ConteraIP Indoor Dome and Micro Bullet cameras The ConteraIP family further includes single-sensor ConteraIP Indoor Dome and award-winning indoor/outdoor Micro Bullet, Bullet, and standard Outdoor Dome models. EX series Bullet and Dome models complete the ConteraIP lineup, offering choice of standard and optional advanced analytics. Visitors can see the newest ConteraIP series in action at the Costar booth, #8045, at ISC West 2020, which has now been rescheduled to July 20-22 in the Sands Convention Center, Las Vegas, Nevada, USA.
Arecont Vision Costar (AVC), globally renowned provider of IP-based megapixel camera technology and video surveillance solutions, will deliver live demonstrations of its latest high-tech cameras from booth 252 at the ISC East 2019 exhibition and conference. The two-day security industry event will be held at the Jacob K. Javits Convention Center, located in New York City, NY, from November 20 - 21, 2019. Total Video Solution AVC will highlight several powerful new cameras as part of the award-winning Total Video Solution AVC will highlight several powerful new cameras as part of the award-winning Total Video Solution, able to be securely and easily accessed anywhere, anytime, including from Security Operation Centers, desktop or laptop computers, smartphones, and tablet devices. Brad Donaldson, Vice President of Product Development for AVC, explains, “Our ConteraIP camera family continues to grow, offering the industry’s best image quality, performance, and reliability at an affordable price point.” Mr. Donaldson continued, “Each of the new cameras is designed to address customer requests for additional configuration options and features, while leveraging the power of our cloud-enabled Total Video Solution.” ConteraIP Omni LX Remote Setup dome cameras AVC has introduced multiple new products since initial launch in July of 2018 as an operating unit of Texas-based Costar Technologies, Inc. AVC is committed to the delivery of innovative product designs and features, outstanding product quality and reliability, and unmatched customer service and support. Now available, the newest member of the adjustable-view multi-sensor Omni camera series – first pioneered for the security industry in 2014 - is the most powerful and capable yet. The Omni LX Remote Setup (or RS) indoor/outdoor dome camera was unveiled at ISC West 2019 in April, and brings a choice of 8 or 20 Megapixel (MP) models each featuring four sensors mounted in individual, motorized gimbals. Remote focus/zoom capability with customisable views complements the default 180-, 280-, and 360-degree choices. NightView technology The compact dome enclosure brings a simple installation design combined with remote setup technology to position, aim, & focus each sensor. Together, these features reduce both installer effort, and eliminate the need to physically touch the camera from a lift or ladders for post-installation view, coverage, or focus adjustments. Standard Omni LX features include superior image quality at up to 30fps (frames per second) per sensor and full multi-streaming capability. Enhanced WDR (wide dynamic range) at up to 120db, NightView technology combined with mechanical IR cut filters for day/night use, both H.265 and SnapStream+ technology for reduced bandwidth use without loss of image quality, and PoE support round out the feature set. ConteraIP Fisheye 360-degree panoramic dome cameras The compact, very-low-profile dome camera offers a full 360-degree image without blind spots Released in September at GSX 2019 Chicago, the new ConteraIP Fisheye Dome indoor/outdoor camera is proving popular with customers seeking an affordable, single-sensor panoramic model with outstanding image quality. The compact, very-low-profile dome camera offers a full 360-degree image without blind spots at 12MP resolution. This product is suitable for day/night projects where a multi-sensor panoramic or Omni camera may not be warranted. Offering multiple de-warp display modes, this PoE camera includes integrated microphone, speaker, IR illuminators, and SDXC card slot for onboard storage. H.264/H.265 encoders and advanced SNAPstream+, SmartIR, WDR, and NightView technologies are included along with the advanced suite of AVC single-sensor camera capabilities. ConteraIP Outdoor Dome & Bullet EX Series The ConteraIP Outdoor Dome EX and Bullet EX cameras first unveiled at ISC West 2019 in April are available for customer ordering. Featuring AVC’s new Advanced Video Analytics suite, each high-performance EX model delivers 5MP resolution. Included analytics are camera tamper detection, intrusion detection, line crossing, and loitering detection. An optional additional suite of analytics is also available, including object classification (person/vehicle), object left/removed, and people/vehicle counting. Each EX model includes True Day/Night capabilities with integrated IR (infrared) illuminators for use indoors or out. Each includes a motorized varifocal lens for rapid focusing during setup and offers the full suite of powerful AVC single-sensor camera capabilities. These include a SDXC card slot for onboard storage, PoE (Power over Ethernet) capability, H.264/H.265 encoders, plus advanced SNAPstream+, SmartIR, Advanced WDR, and NightView technologies. Cloud-enabled ConteraVMS All of these new ConteraIP camera series are designed for use with the cloud-enabled ConteraVMS as part of the Total Video Solution. AVC MegaLab validation and ONVIF Profile S, G, Q, and T compliance provide easy integration with 3rd party VMS systems when needed.
Related white papers
Making Sense of Today’s Security Camera Options
2021 Trends in Video SurveillanceDownload
Exploring New Vertical Markets for Professional Security SystemsDownload
5 Security Lessons For Navigating COVID-19Download
Capture New Opportunities With Computer Vision And Video AnalyticsDownload
VIVOTEK Collaborates With Existo To Deliver A Comprehensive Surveillance Solution For Michigan Cannabis Cultivation Facility
- VIVOTEK Collaborates With Existo To Deliver A Comprehensive Surveillance Solution For Michigan Cannabis Cultivation Facility
- Dahua Technology Provides Low-Light Security Solutions To The New Athos Cave In Georgia
- Dallmeier Deploys 19 "Safe City" Segment German Cities With Data Protection-Compliant Video Technology
- Dahua Technology's Video Surveillance Solution Employed At Cedr Factory To Improve Security Level