Ajax MotionCam Outdoor Wireless Outdoor Motion Detector With A Photo Camera To Verify Alarms

• Make: Ajax
• Model code: MotionCam Outdoor
• PIR Detectors: Yes
• Coverage/ Range m: Adjustable, from 3 to 15
• Angle of Detection ^o: Horizontal — 90°, Vertical — 80°

With MotionCam Outdoor, you’ll know about the actual situation at a site even before the burglars understand that they’re busted. When intruders enter the field of view of the two PIR sensors, the detector analyzes the body's thermal radiation with correlation and spectral analysis to filter false alarms, making sure that it is a human, and then activates the alarm. It all happens in less than a second. An animated series of photos follows the instant motion alarm for an accurate situation appraisal. The device operates at low temperatures and is protected against dust and splashes. The advanced anti-masking system reacts to hindering, covering and painting the lens. When the system is armed, the detector continuously receives signals from two PIR sensors. If both sensors detect identical motion, MotionCam Outdoor instantly transmits an alarm signal to the hub and confirms it with an animated series of photos. Hub activates the sirens connected to the system, triggers scenarios, notifies users and the security company. Visual verification helps to instantly ascertain the situation, saving users from concerns and security companies from unnecessary patrol dispatches. Users know exactly where motion is detected. The notifications contain the name of the hub (name of the secure facility), the name of the device, and the virtual room to which the detector is assigned. Combining the best optics, fast processor and advanced software algorithms, MotionCam Outdoor takes informative pictures in any weather, day or night. The built-in MotionCam Outdoor camera can take 1 to 5 images with a resolution of 320 × 176 pixels and up to 3 images with a resolution of 640 × 352 pixels. The detector has infrared illumination for shooting in the dark, which is activated only when an alarm is triggered. MotionCam Outdoor is equipped with two independent PIR sensors, the signals of which are analyzed by a two-step LISA algorithm. When both sensors detect motion, LISA performs correlation and spectral analysis of the signals to instantly separate the real threats and the interferences. The device automatically increases or decreases the sensor sensitivity in order to accurately detect motion in the heat and cold. MotionCam Outdoor can not be unnoticeably disabled even if the system is disarmed. The detector is equipped with masking sensors reacting to hindering, covering and painting the lens. It will take the hub less than a minute to detect the loss of communication with the detector and inform a central monitoring station and users about the problem. The fact that MotionCam Outdoor was dismantled will become known instantly. The built-in tamper alarms if the dust- and moisture-proof detector body is opened.