Ajax Intruder Alarms: Communicators & Communication Systems

The safeguarding of premises through the monitoring of entrance and exit points has traditionally been a very manual aspect of security. Human operators have been relied on to make decisions about who to admit and deny based on levels of authorization and the appropriate credentials. The access control business, like many industries before it, is undergoing its own digital transformation But the access control business, like many industries before it, is undergoing its own digital transformation; one where the protection of premises, assets and people is increasingly delivered by interconnected systems utilising IoT devices and cloud infrastructure to offer greater levels of security and protection. Modern access control solutions range from simple card readers to two factor authentication systems using video surveillance as a secondary means of identification, right through to complex networks of thermal cameras, audio speakers and sensors. These systems, connected through the cloud, can be customized and scaled to meet the precise requirements of today’s customer. And it’s the ease of cloud integration, combined with open technologies and platforms that is encouraging increasing collaboration and exciting developments while rendering legacy systems largely unfit for purpose. Remote management and advanced diagnostics Cloud technology and IoT connectivity means remote management and advanced diagnostics form an integral part of every security solution.Cloud technology and IoT connectivity means remote management and advanced diagnostics form an integral part of every security solution. For example, as the world faces an unprecedented challenge and the COVID-19 pandemic continues to cause disruption, the ability to monitor and manage access to sites remotely is a welcome advantage for security teams who might otherwise have to check premises in person and risk breaking social distancing regulations. The benefits of not physically having to be on site extend to the locations within which these technologies can be utilised. As an example, within a critical infrastructure energy project, access can be granted remotely for maintenance on hard to reach locations. Advanced diagnostics can also play a part in such a scenario. When access control is integrated with video surveillance and IP audio, real-time monitoring of access points can identify possible trespassers with automated audio messages used to deter illegal access and making any dangers clear. And with video surveillance in the mix, high quality footage can be provided to authorities with real-time evidence of a crime in progress. Comprehensive protection in retail The use of connected technologies for advanced protection extends to many forward-looking applications. Within the retail industry, autonomous, cashier-less stores are already growing in popularity. Customers are able to use mobile technology to self-scan their chosen products and make payments, all from using a dedicated app. From an access control and security perspective, connected doors can be controlled to protect staff and monitor shopper movement. Remote management includes tasks such as rolling out firmware updates or restarting door controllers, with push notifications sent immediately to security personnel in the event of a breach or a door left open. Remote monitoring access control in storage In the storage facility space, this too can now be entirely run through the cloud with remote monitoring of access control and surveillance providing a secure and streamlined service. There is much to gain from automating the customer journey, where storage lockers are selected online and, following payment, customers are granted access. Through an app the customer can share their access with others, check event logs, and activate notifications. With traditional padlocks the sharing of access is not as practical, and it’s not easy for managers to keep a record of storage locker access. Online doors and locks enable monitoring capabilities and heightened security for both operators and customers. The elimination of manual tasks, in both scenarios, represents cost savings. When doors are connected to the cloud, their geographical location is rendered largely irrelevant. Online doors and locks enable monitoring capabilities and heightened security for both operators and customers They become IoT devices which are fully integrated and remotely programmable from anywhere, at any time. This creates a powerful advantage for the managers of these environments, making it possible to report on the status of a whole chain of stores, or to monitor access to numerous storage facilities, using the intelligence that the technology provides from the data it collects. Open platforms powers continuous innovation All of these examples rely on open technology to make it possible, allowing developers and technology providers to avoid the pitfalls that come with the use of proprietary systems. The limitations of such systems have meant that the ideas, designs and concepts of the few have stifled the creativity and potential of the many, holding back innovation and letting the solutions become tired and their application predictable. Proprietary systems have meant that solution providers have been unable to meet their customers’ requirements until the latest upgrade becomes available or a new solution is rolled out. This use of open technology enables a system that allows for collaboration, the sharing of ideas and for the creation of partnerships to produce ground-breaking new applications of technology. Open systems demonstrate a confidence in a vendor’s own solutions and a willingness to share and encourage others to innovate and to facilitate joint learning. An example of the dynamic use of open technology is Axis’ physical access control hardware, which enables partners to develop their own cloud-based software for control and analysis of access points, all the while building and expanding on Axis’ technology platform. Modern access control solutions range from simple card readers to two factor authentication systems using video surveillance as a secondary means of identification Opportunities for growth Open hardware, systems and platforms create opportunities for smaller and younger companies to participate and compete, giving them a good starting point, and some leverage within the industry when building and improving upon existing, proven technologies. This is important for the evolution and continual relevance of the physical security industry in a digitally enabled world. Through increased collaboration across technology platforms, and utilising the full range of possibilities afforded by the cloud environment, the manufacturers, vendors and installers of today’s IP enabled access control systems can continue to create smart solutions to meet the ever-changing demands and requirements of their customers across industry.

In 2017, IoT-based cyberattacks increased by 600%. As the industry moves towards the mass adoption of interconnected physical security devices, end users have found a plethora of advantages, broadening the scope of traditional video surveillance solutions beyond simple safety measures. Thanks in part to these recent advancements, our physical solutions are at a higher risk than ever before. With today’s ever evolving digital landscape and the increasing complexity of physical and cyber-attacks, it’s imperative to take specific precautions to combat these threats. Video surveillance systems Cybersecurity is not usually the first concern to come to mind When you think of a video surveillance system, cybersecurity is not usually the first concern to come to mind, since digital threats are usually thought of as separate from physical security. Unfortunately, these two are becoming increasingly intertwined as intruders continue to use inventive methods in order to access an organization's assets. Hacks and data breaches are among the top cyber concerns, but many overlook the fact that weak cybersecurity practices can lead to physical danger as well. Organizations that deploy video surveillance devices paired with advanced analytics programs often leave themselves vulnerable to a breach without even realizing it. While they may be intelligent, IoT devices are soft targets that cybercriminals and hackers can easily exploit, crippling a physical security system from the inside out. Physical security manufacturers Whether looking to simply gain access to internal data, or paralyze a system prior to a physical attack, allowing hackers easy access to surveillance systems can only end poorly. In order to stay competitive, manufacturers within the security industry are trading in their traditional analog technology and moving towards interconnected devices. Due to this, security can no longer be solely focused on the physical elements and end users have taken note. The first step towards more secured solutions starts with physical security manufacturers choosing to make cybersecurity a priority for all products, from endpoint to edge and beyond. Gone are the days of end users underestimating the importance of reliability within their solutions. Manufacturers that choose to invest time and research into the development of cyber-hardening will be ahead of the curve and an asset to all. Wireless communication systems Integrators also become complicit in any issues that may arise in the future Aside from simply making the commitment to improve cyber hygiene, there are solid steps that manufacturers can take. One simple action is incorporating tools and features into devices that allow end users to more easily configure their cyber protection settings. Similarly, working with a third party to perform penetration testing on products can help to ensure the backend security of IoT devices. This gives customers peace of mind and manufacturers a competitive edge. While deficient cybersecurity standards can reflect poorly on manufacturers by installing vulnerable devices on a network, integrators also become complicit in any issues that may arise in the future. Just last year, ADT was forced to settle a $16 million class action lawsuit when the company installed an unencrypted wireless communication system that rendered an organization open to hacks. Cybersecurity services In addition, we’ve all heard of the bans, taxes and tariffs the U.S. government has recently put on certain manufacturers, depending on their country of origin and cybersecurity practices. Lawsuits aside, employing proper cybersecurity standards can give integrators a competitive advantage. With the proliferation of hacks, malware, and ransomware, integrators that can ease their client's cyber-woes are already a step ahead. By choosing to work with cybersecurity-focused manufacturers who provide clients with vulnerability testing and educate end users on best practices, integrators can not only thrive but find new sources of RMR. Education, collaboration and participation are three pillars when tackling cybersecurity from all angles. For dealers and integrators who have yet to add cybersecurity services to their business portfolios, scouting out a strategic IT partner could be the answer. Unlocking countless opportunities Becoming educated on the topic of cybersecurity and its importance for an organization is the first step Physical security integrators who feel uncomfortable diving headfirst into the digital realm may find that strategically aligning themselves with an IT or cyber firm will unlock countless opportunities. By opening the door to a partnership with an IT-focused firm, integrators receive the benefit of cybersecurity insight on future projects and a new source of RMR through continued consulting with current customers. In exchange, the IT firm gains a new source of clients in an industry otherwise untapped. This is a win for all those involved. While manufacturers, dealers and integrators play a large part in the cybersecurity of physical systems, end users also play a crucial role. Becoming educated on the topic of cybersecurity and its importance for an organization is the first step. Commonplace cybersecurity standards Below is a list of commonplace cybersecurity standards that all organizations should work to implement for the protection of their own video surveillance solutions: Always keep camera firmware up to date for the latest cyber protections. Change default passwords, especially those of admins, to keep the system locked to outside users. Create different user groups with separate rights to ensure all users have only the permissions they need. Set an encryption key for surveillance recordings to safeguard footage against intruders and prevent hackers from accessing a system through a backdoor. Enable notifications, whether for error codes or storage failures, to keep up to date with all systems happenings. Create/configure an OpenVPN connection for secured remote access. Check the web server log on a regular basis to see who is accessing the system. Ensure that web crawling is forbidden to prevent images or data found on your device from being made searchable. Avoid exposing devices to the internet unless strictly necessary to reduce the risk of attacks.

Johnson Controls recently unveiled the findings of its 2018 Energy Efficiency Indicator (EEI) survey that examined the current and planned investments and key drivers to improve energy efficiency and building systems integration in facilities. Systems integration was identified as one of the top technologies expected to have the biggest impact on the implementation in smart buildings over the next five years, with respondents planning to invest in security, fire and life-safety integrations more so than any other systems integration in the next year. As advanced, connected technologies drive the evolution of smart buildings, security and safety technologies are at the center of more intelligent strategies as they attribute to overall building operations and efficiencies. SecurityInformed.com spoke with Johnson Controls, Building Solutions, North America, VP of Marketing, Hank Monaco, and Senior National Director of Municipal Infrastructure and Smart Cities, Lisa Brown, about the results of the study, smart technology investments and the benefits of a holistic building strategy that integrates security and fire and life-safety systems with core building systems. Q: What is the most striking result from the survey, and what does it mean in the context of a building’s safety and security systems? The results show an increased understanding about the value of integrating safety and security systems with other building systems Hank Monaco: Investment in building system integration increased 23 percent in 2019 compared to 2018, the largest increase of any measure in the survey. When respondents were asked more specifically what systems they we planning to invest in over the next year, fire and life safety integration (61%) and security system integration (58%) were the top two priorities for organizations. The results show an increased understanding about the value of integrating safety and security systems with other building systems to improve overall operations and bolster capabilities beyond the intended function of an individual system. Q: The survey covers integration of fire, life safety and security systems as part of "smart building" systems. How do smarter buildings increase the effectiveness of security and life safety systems? Hank Monaco: A true “smart building” integrates all building systems – security, fire and life-safety, HVAC, lighting etc. – to create a connected, digital infrastructure that enables individual technologies to be more intelligent and perform more advanced functions beyond what they can do on their own. For example, when sensors and video surveillance are integrated with lighting systems, if abnormal activity is detected on the building premise, key stakeholders can be automatically alerted to increase emergency response time. With integrated video surveillance, they also gain the ability to access surveillance footage remotely to assess the situation. When sensors and video surveillance are integrated with lighting systems abnormal activity on the premise can automatically be detected Q: How can integrated security and life safety systems contribute to greater energy efficiency in a smart building environment? Hank Monaco: Security, fire and life-safety systems can help to inform other building systems about how a facility is used, high-trafficked areas and the flow of occupants within a building. Integrated building solutions produce a myriad of data that can be leveraged to increase operational efficiencies. From an energy efficiency standpoint, actionable insights are particularly useful for areas that are not frequently occupied or off-peak hours as you wouldn’t want to heat or cool an entire building for just one person coming in on the weekend. When video surveillance is integrated with HVAC and lighting systems, it can monitor occupancy in a room or hallway. The video analytics can then control the dimming of lights and the temperature depending on occupant levels in a specific vicinity. Similarly, when access control systems are integrated with these same systems, once a card is presented to the reader, it can signal the lights or HVAC system to turn on. In this example, systems integration can ultimately help enable energy savings in the long run. Security and life safety systems contribute to help enable greater energy efficiency and energy savings in the long run Q: What other benefits of integration are there (beyond the core security and life safety functions)? Hank Monaco: Beyond increased security, fire and life-safety functions, the benefits of systems integration include: Increased data and analytics to garner a holistic, streamlined understanding of how systems function and how to improve productivity Ability to track usage to increase efficiency and reduce operational costs Enhanced occupant experience and comfort Increased productivity and workflow to support business objectives Smart-ready, connected environment that can support future technology advancements Q: What lesson or action point should a building owner/operator take from the survey? How can the owner of an existing building leverage the benefits of the smart building environment incrementally and absent a complete overhaul? Lisa Brown: Johnson Controls Energy Efficiency Indicator found that 77% of organizations plan to make investments in energy efficiency and smarter building technology this year. This percentage demonstrates an increased understanding of the benefits of smart buildings and highlights the proactive efforts building owners are taking to adopt advanced technologies. There is an increased understanding that buildings operate more effectively when different building systems are connected As smart buildings continue to evolve, more facilities are beginning to explore opportunities to advance their own spaces. A complete overhaul of legacy systems is not necessary as small investments today can help position a facility to more easily adopt technologies at scale in the future. As a first step, it’s important for building owners to conduct an assessment and establish a strategy that defines a comprehensive set of requirements and prioritizes use-cases and implementations. From there, incremental investments and updates can be made over a realistic timeline. Q: What is the ROI of smart buildings? Lisa Brown: As demonstrated by our survey, there is an increased understanding that buildings operate more effectively when different building systems are connected. The advanced analytics and more streamlined data that is gathered through systems integration can provide the building-performance metrics to help better understand the return on investment (ROI) of the building systems. This data is used to better understand the environment and make assessments and improvements overtime to increase efficiencies. Moreover, analytics and data provide valuable insights into where action is needed and what type of return can be expected from key investments.

Ajax Systems have announced that the latest OS Malevich 2.9 update brings significant changes for users and security industry professionals. The new data import feature simplifies the process of replacing old hubs with new ones. Remote activation/deactivation  Detectors that work incorrectly can now be deactivated remotely and still be part of the system. Button and transmitter got new types of alarm notifications, adjustable in the app. Automation devices can now work in pulse mode and activate electrical appliances for a short period. The in-app panic button can now be used anywhere, not just at the protected property. Upon activation, it sends smartphone coordinates to an alarm monitoring company and all system users. Data import: Replacing hubs without reconfiguring the system With the import feature, all settings, connected devices, security groups, scenarios, and users can be easily migrated from an old hub to the new one. Engineers and user-administrators can install a more advanced hub model on the protected property without reconnecting each detector. Import feature also allows engineers to quickly restore the security system’s integrity, if its hub fails for some reason. Even if the system has hundreds of devices, dozens of scenarios, and several ReX range extenders, data import will take less than 15 minutes. The process is almost fully automated. Just connect the new hub to the internet, switch off the old one, start the data import, and follow instructions in the app. Temporary device deactivation Wrong installation, bad mounting choice, low signal level, broken tamper, or any other malfunction can easily result in a false alarm. With the release of OS Malevich 2.9, engineers can deactivate malfunctioning detectors remotely. No need to delete them from the list of devices. No need to rush to location. Two types of temporary device deactivation are available in the Ajax app, one is complete device deactivation and the other, deactivation of the notifications about the lid state. When the device is entirely deactivated, it doesn’t execute system commands and can’t take part in automation scenarios. Hub ignores all alarms and notifications of the deactivated devices. If notifications about the lid state of the device are disabled, the hub ignores only its tamper alerts. Alarm monitoring companies and users can still receive other alarms and notifications of this device. Temporary device deactivation function became one of the most popular requests from European PRO-users. Now, the functionality is available for all Ajax users. Pulse mode for Socket and WallSwitch Socket and WallSwitch (with firmware version 5.54.1.0 or higher) as well as Relay (with any firmware version) can now toggle switch devices, powered from the mains for a defined period, from 0.5 to 255 seconds. When the timer expires, devices switch back to their initial state: on or off. Previously, Pulse mode was available only in the Relay settings. It allowed electrical contacts to touch for up to 15 seconds and let the current flow. At the same time, Socket and WallSwitch could work only in bi-stable mode, closing and opening an electric circuit following the user’s command or executing a specific scenario. An additional command was required to change their state again. With OS Malevich 2.9 update, users have more options for automating lighting, electromechanical locks, and electric valves that control the water supply. Unlike Relay, WallSwitch and Socket can control electrical appliances without intermediary relays, rechargeable batteries, or an inverter. Adjustable alarm types for Button and Transmitter Information in alarm notifications defines how an alarm monitoring company and users will respond to the situation With OS Malevich 2.9 release, the settings of button and transmitter were expanded with an option to choose a type of alarm that the device communicates with an alarm monitoring company and other users: Intrusion Fire Medical help Alarm button Gas Information in alarm notifications defines how an alarm monitoring company and users will respond to the situation Information in alarm notifications Information in alarm notifications defines how an alarm monitoring company and users will respond to the situation. That’s why it has to correspond to the nature of the threat accurately. For instance, a wired gas detector connected to Ajax via a transmitter should notify about a gas alert. And button provided to an older person should notify about a medical emergency. By choosing an appropriate alarm type, engineers and user-admins change both the text of an alarm notification and a code of the event sent to the CMS. Transmission of smartphone coordinates to alarm monitoring companies using the in-app panic button Button, SpaceControl and panic button A panic button is a tool that is hardly ever used. But in case of an emergency, it can save lives. Button, SpaceControl, or the panic button in the Ajax app notifies CMS operators if someone is in danger and are located on protected premises. An alarm monitoring company will respond immediately, once the button is pressed. With OS Malevich 2.9 release, the in-app panic button transmits an alarm notification along with the smartphone coordinates to an alarm monitoring company. All system users also get the coordinates and can copy them to get directions using GPS apps. Now, users can call for help using the Ajax app from wherever they are. The second layer of protection from accidental pressing in SpaceControl SpaceControl key fob With OS Malevich 2.9 release, SpaceControl gets additional protection from accidental pressing SpaceControl key fob has to be within reach, in a pocket, bag, or keychain, the places where its buttons can be easily pressed by accident. So, they have equipped SpaceControl with firm buttons and developed a filter that ignores any pressing shorter than 0.15 seconds. With OS Malevich 2.9 release, SpaceControl (firmware 5.54.1.0 or higher) gets additional protection from accidental pressing, which has already proved its efficiency in button. Now, double-click and long-press activation options are available in the device settings in the Ajax app. They recommend turning on this feature to avoid situations when premises are accidentally armed, or the panic button is unintentionally pressed. Other features added include: The option to configure Socket LED brightness - Now, it can be turned off or dimmed. Users can check for the new features in the device settings in the Ajax app or check the Socket manual if in need of help. Notifications about hubs being switched off/on or factory reset - Now, alarm monitoring companies and users will be informed of why a hub went offline. The option to switch off the visual indication of a detector triggering - The LED indicator of a detector can now be deactivated in the device settings. The feature is available for DoorProtect, DoorProtect Plus, MotionProtect, MotionProtect Plus, CombiProtect, MotionProtect Outdoor, MotionCam, and GlassProtect with firmware update 5.55.0.0 and higher, as well as MotionProtect Curtain with firmware update 6.53.1.1 or higher. New devices support - Hub 2 Plus, StreetSiren DoubleDeck, MultiTransmitter.

With Hub 2, a user will no longer need to live under round-the-clock camera surveillance to know why an alarm has gone off. Like the first generation of hubs, Hub 2 protects the user’s property against burglars, fire, and flood. But unlike its predecessors, it sends not only alarm notifications but also animated series of images from MotionCam motion detectors.  Thanks to the optional Wings radio protocol, a built-in battery, and two SIM card slots, Hub 2 is independent of the guarded facility infrastructure. It will continue protecting the user’s family and property, even if the building has lost power and Internet connection. Hub 2 is a control tool for safe homes, offices, shops, or even industrial facilities. The control panel can manage up to a 100 of Ajax detectors and devices on a distance of up to 2000 meters. Protection of any scale And this is not the limit - the ReX radio signal range extender boosts the hub’s coverage area to up to 16 km². The new hub has three channels to communicate with the users and security companies: Ethernet and two slots for SIM cards. The second slot allows users to improve stability by choosing two different GSM operators. And thanks to the instantaneous switching between communication channels, Hub 2 is guaranteed to transmit photos and alarms even with an unstable Internet connection. The list of features of the Ajax hubs expands every year with the regular updates of the OS Malevich operating system. To ensure the future development of the Hub 2, Ajax Systems has increased the amount of ROM and RAM and equipped it with a fast processor.

Even the most reliable security equipment is never fully protected from false alarms. Most of the time, they occur due to simple oversights, hyperactive pets, or incorrect installation. But when the security companies react to false alarms, they risk getting late in case of a real emergency. Some send security patrols to check the unverified alarms right away. The others count the detector triggerings before responding and lose precious minutes in the result. In any case, false alarms bring stress for the consumers and the risk of suffering losses. Prime security companies found the solution in photo and video alarm verification. Both options came with serious compromises. On the one hand, motion detectors equipped with cameras provided a technical possibility to see what triggered the alarm. But the systems that support such devices required frequent maintenance (due to low battery life), delivered low-quality pictures, and were significantly overpriced. Wireless security system On the other hand, video surveillance allowed for a 24/7 monitoring but came with the new difficulties: complicated installation and configuration, total dependence on the building’s infrastructure, high risks of malfunctioning and exploits, as well as the privacy issues. Both solutions didn’t have a chance to become the new security standard. The market required the new cost-efficient solution that would unite the reliability and informing efficiency of the best security systems with the visual capabilities of the cameras. Ajax Systems was one of the first ones to develop the security system with visual alarm verification. Just like they were not the ones to invent wireless security system when launching Jeweller. Parallel transmission of alarms With Wings, the user can view the first snapshot of the situation in under 9 seconds But that fact gave them company an opportunity to rethink the experience of using the equipment from the consumer’s and the service provider’s points of view. They tested and analyzed the weak spots and best practices in the industry and eventually created a breakthrough product in terms of informing speed, communication distance, and battery life. To ensure fast and reliable transmission of the photo confirmations, the company developed a new Wings radio protocol based on Jeweller. The technologies that MotionCam and Hub 2 use to communicate, nullify the interference between channels during the parallel transmission of alarms and pictures. With Wings, the user can view the first snapshot of the situation in under 9 seconds while the alarm signals sent via Jeweller are still delivered in a split second. Camera-equipped detector Photo transmission does not shorten the MotionCam communication range. Just like the rest of the Ajax detectors, the new gadget operates at a distance of 1700 meters from the hub. This number is one of the top performance results for a camera-equipped detector. The Ajax security system still covers an area of up to 12 km², which is enough to protect the multi-story buildings but now with visual alarm verification. MotionCam features an extraordinary - for a camera-equipped detector - autonomy with up to 4 years of battery life. This is not an optimistic forecast with ideal use conditions. Instead, it is an estimate for the typical operating conditions, which includes the regular activations and changes in weather conditions. And they have considered the privacy issue. The MotionCam detectors activate their cameras only if triggered by motion when the system is armed. Indoor motion detector Without a doubt, the Wings technology sets the new standards in the security industry" The users and the security company have no way to access the camera and request to take pictures. All photos are encrypted during transmission, and as they are stored at the Ajax Cloud (just like all the events in the security system’s log). No one analyses and processes the photographs from the detectors. MotionCam and Hub 2 raise the informing quality of the Ajax security system to the next level while preserving its fundamental characteristics. MotionCam can easily replace any indoor motion detector, which makes upgrading the security system as painless as possible. It will forever change the user’s attitude to alarms, yet they still won’t be bothered with the system maintenance for years to come. Phenomenal energy efficiency “I am proud that we can make such inventions. Without a doubt, the Wings technology sets the new standards in the security industry. Fast photo transmission at a distance of 1700 meters with phenomenal energy efficiency, it’s magic that was previously unavailable on the market. We’ve managed to boost the informing quality of the system to the next level and preserve the familiar user experience at the same time”, says Aleksandr Konotopskyi, CEO Ajax Systems.