Delta Scientific Vehicle tracking

Delta Scientific HTTC45 is a spiked phalanx barrier.

Delta Scientific DSC2000M-RL is a manual barrier.

The TT203 is a bollard that is 8.63 inches (219 mm) in diameter and 24 inches (610 mm) high. It is used for intermediate level security applications, including government facilities, corporate headquarters and high value cargo depots. Bollards are lowered for passage of authorized vehicles. They operate individually or in groups up to ten. TT203 bollards are typically spaced on four-foot centers. They are crash rated.

Delta Scientific Corporation MG215 beam barrier is available in widths ranging from 12 to 25 feet (3.6 to 7.6 M). It is supplied with the hinge and latching post. The latch consists of a simple cross pin that is pad locked into place. As an option a tamper shield can be provided to protect specific styles of pad locks. Finish is epoxy primer and enamel safety yellow paint.

Delta Scientific TW107 is a rising barriers designed for a wide range of traffic control and security applications. It provide continuous operation with the minimum of maintenance, the barricade systems are well suited to providing security at Airports, Car Parks and Freight Terminals.

Delta Scientific's TW4030 is a surface mounted, dual buttress barricade consisting of a heavy steel plate capable of being rotated from the free pass position to its guard position by a hydraulic power unit. Barricade height is 21 inches (53cm). Standard clear opening width is 12 feet (3.66m). Maximum width is 20 feet (6.1m).

Delta Scientific TW108 is a rising barrier designed for a wide range of traffic control and security applications. It provides continuous operation with the minimum of maintenance, the barricade systems are well suited to providing security at Airports, Car Parks and Freight Terminals.

Delta Scientific TT203M is a manual bollard used for intermediate level security applications, including government facilities, corporate headquarters and high value cargo depots. It is operated individually or in groups up to ten and are typically spaced on four-foot centers. The manual version features a manual lift and can be locked in the up or down position.

This TW2015 protects access to the Miami Federal Courthouse. The TW2015 Hydraulic Barricade System is a one-inch thick ramp that features quick installation. It is designed to install at difficult locations such as parking structure ramps or areas with sub-surface drainage problems and used for intermediate security applications. The TW2015 is a 120-inch (3,048 mm) moving ramp, 18 inches (457 mm) high that is surface mounted. Crash rated, the barricades are lowered to allow passage of authorized vehicles.

The TT207S hydraulic barricade system is the first line of defense at embassies and key facilities worldwide.

Delta Scientific’s all weather electro-pneumatic systems are aesthetic, durable, flood-resistant and green, featuring low power consumption and able to run at 300 cycles per hour.

The DSC800 can be a hydraulic, pneumatic, manual operation or fixed post bollard. Its height is 30 inches and its diameter is 6.63 inches. Applications include lower threat or low speed areas for Federal applications, residential, universities, walkways, cargo depots and rental car agencies. Speed of operation can adjust from 3 to 10 seconds.

Delta Scientific Corporation TT212 Hydraulic cable crash beam barrier is used at government facilities, embassies and automotive sales facilities. The beams are raised to allow passage of authorized vehicles. Clear opening ranges from 10.5 to 24 feet (3,200 mm to 7,315 mm) are available to allow passage of almost every type of vehicle.

Delta Scientific Corporation TT212E Hydraulic beam barrier is used at government facilities, embassies and automotive sales facilities. Clear opening ranges from 10.5 to 24 feet (3,200 mm to 7,315 mm) are available to allow passage of almost every type of vehicle.

Delta Scientific Corporation TT212E Manual beam barrier is used at government facilities, embassies and automotive sales facilities. Clear opening ranges from 10.5 to 24 feet (3,200 mm to 7,315 mm) are available to allow passage of almost every type of vehicle.

Able to be deployed or relocated for full manual or automatic operation within two hours, Delta Scientific’s quick deployment Series IP500 Barrier will stop and destroy a 15,000 pound (6,800 kg) truck traveling at 30 mph (48 km/h) in less than 20 feet (6 m). It secures an entrance roadway 8 to15 feet in width from vehicle attack. Hydraulic and manual versions are available.

The DSC701 can be a hydraulic, pneumatic, manual operation or fixed post bollard. Its height is 35 inches and diameter is between 12.75 inches. Its speed of operation can adjust from 3 to 10 seconds. Applications include Federal buildings and high value cargo depots. These bollards can look utilitarian or elegant as the application requires. The bollard can be used with or without a decorative aluminum casting. The castings can be powder-coated and available in a variety of styles.

The DSC720 1M  is Delta's highest crash rated bollard tested with a 15,000 lb vehicle at 50 mph. This bollard will stop and destroy much larger vehicles than those tested at very high velocities. Applications include Federal and DOD facilities, embassies and high profile, high-risk clients.

The DSC720 1M  is Delta's highest crash rated bollard tested with a 15,000 lb vehicle at 50 mph. This bollard will stop and destroy much larger vehicles than those tested at very high velocities. The 1M, one Meter version has a shown to have a zero penetration (-.5M penetration of the truck bed) for high CG vehicles found in the USA and in the EU.

The DSC720 1M  is Delta's highest crash rated bollard tested with a 15,000 lb vehicle at 50 mph. This bollard will stop and destroy much larger vehicles than those tested at very high velocities. Applications include Federal and DOD facilities, embassies and high profile, high-risk clients.

Delta Scientific DSC701FP is a fxed post bollard operate individually or in groups of up to ten and are used for intermediate level security applications. It is available to secure the sides of roadways with the same crash rating and appearance.

The DSC701 can be a hydraulic, pneumatic, manual operation or fixed post bollard. Its height is 35 inches and diameter is between 12.75 inches. Its speed of operation can adjust from 3 to 10 seconds. Applications include Federal buildings and high value cargo depots. These bollards can look utilitarian or elegant as the application requires. The bollard can be used with or without a decorative aluminum casting. The castings can be powder-coated and available in a variety of styles.

With P1 Rating, stops 15,000 pound (66.7 Km) truck at 50 mph (80 kph) with only a 0.5 meter penetration of the vehicle Created to stop taller trucks such as those found in Europe and the Middle East from tumbling over anti-terrorist crash-proof bollards Deployed at U.S. locales, including Federal buildings and Department of Defense installations, as well as at various nations’ embassies and high profile, high-risk facilities Has seen multiple tests to US Department of State and UK PAS standards

Delta Scientific TT212H is a cable crash hydraulic barrier.

DSC207S is a new Embassy barricade, fully enclosed, shallow foundation wedge barricade with covered front and sides.  In a full scale crash test conducted by an independent test lab, the DSC207s met the criteria for an M50/K12 rating. Access is available from either the top plate or front. The barricade can also be galvanized.  Its small footprint increases the numbers of locations in which it can be used. Available with Delta’s new programmable drive system (PDS), the barricade can be electronically powered with an internal limit switch and multiple voltage input.

The DSC720 1M is Delta's highest crash rated bollard tested with a 15,000 lb vehicle at 50 mph. This bollard will stop and destroy much larger vehicles than those tested at very high velocities. Applications include Federal and DOD facilities, embassies and high profile, high-risk clients. These bollards have seen multiple tests to US Department of State and UK PAS standards. The 1M, one Meter version has a shown to have a zero penetration (-.5M penetration of the truck bed) for high CG vehicles found in the USA and in the EU.

Delta Scientific DS-22 is a ixed bollard.

The DSC900 provides security against vehicle-based terrorism or thefts for high-cycle locations such as the entrances to large office facilities, government agencies and military bases. Able to be deployed in high traffic locations for full manual or automatic operation within two hours, Delta Scientific’s quick deployment modular Series DSC900 Barricade features a phalanx-type rising plate barrier mounted within multiple inertial pods.