IP cameras for video surveillance has been a trending topic amongst enterprises across the world due to rising concerns for security and safety. IP CCTV cameras are revolutionizing security measures, and technology has evolved to allow for a more diverse security monitoring system through high resolution, larger digital storage options and compatibility for integrated analytical software.
According to Global CCTV Market Forecast 2022, analysts expect the market for global CCTV to grow at a CAGR of around 11% during 2018-2022.
Clearly, a successful hack of an enterprise security camera system could lead to a range of implications. Amongst the main ones is unauthorized access to video and audio streams of data, as well as to the archive, violation of confidentiality, HIPPA, PII and potential leaks of personal and corporate information, possible copying, unauthorized distribution and duplication of such data.
“Most Enterprise video surveillance systems are vulnerable to hackers. According to our studies, more than half of companies and organizations, both large and small, do not take sufficient precautions when it comes to preventing their security cameras from being hacked. Be it ignorance or just careless approach to security of their network in general, the results of hacking can be disastrous,” says Chris Ciabarra, the CTO and co-founder of Athena Security.
With the increasing number of surveillance cameras installed in homes, offices and public places, hacking incidents related to these devices happen more and more often.
The ease of hacking surveillance cameras
It’s not a secret that surveillance cameras, like many other Internet of things (IoT) devices, are full of vulnerabilities that can be exploited by hackers.
A hacker can find hundreds of potentially vulnerable IoT devices to hack into
Cameras, just like all other devices connected to the Internet, have IP addresses that are easy to find using Shodan, a search engine for Internet-connected devices. With this simple tool, a hacker can find hundreds of potentially vulnerable IoT devices to hack into, including cameras, especially when most companies use default passwords.
The solution
Below are basic recommendations on how to protect your camera network, and what actions you should take to minimize the chance of hacking.
- Change the default username and password
You should start by changing the default password and username of your camera network. Even though this may seem obvious, not everyone does it, practically leaving the door for hackers wide open.
Use a strong password that is hard to guess. When setting up the password use numbers, symbols, both uppercase and lowercase letters. Do not use simple and commonly used passwords, such as the ones in SplashData's list of 100 worst passwords of the year.
Do not use the same password you are already using for other online accounts. According to a recent survey on data privacy conducted in May 2019, 13% of respondents with at least one online account say they use the same password for all their accounts. Using a password manager to generate a strong random password may be a good idea.
- Update your camera firmware regularly
Keeping cameras firmware up-to-date is very important as it allows you to prevent hackers from exploiting vulnerabilities and bugs that are already patched by manufacturers in a new firmware update.
Despite the fact that most modern cameras will automatically download and install firmware updates, some require the user to check for updates and install them.
- Set up two-factor authentication
Set up the two-factor authentication if your cameras support it. With two-factor authentication on, the camera manufacturer will send you a randomly generated passcode via text message or phone call, as an addition to username and password, during each log in to the account. Two-factor authentication prevents hackers from accessing the camera system even if they were able to crack username and password.
Not all surveillance camera systems support two-factor authentication, though.
Technical recommendations
- Prevent cameras from sending information to third parties
Companies that use surveillance cameras very often do not put enough effort into protecting their cameras and the data they transmit, despite the fact that this footage is of great importance to many people.
The firmware of most cameras from different manufacturers is programmed in a way to keep a connection with the manufacturer’s server without knowledge of the end-user. Most users, both private and corporate, are not aware of this and therefore do not take any steps to protect themselves from this potential vulnerability, which could result in footage leak to a third party or a successful hacker attack.
To prevent your camera network from transmitting, the following steps should be taken.
Step 1: Statically assign an IP address
Statically assign IP address for each camera, subnet mask and leave gateway blank or 127.0.0.1, if this is allowed in gateway fields to be entered. If the firmware does not allow blank or 127 subnets, just point gateway to an unused dedicated IP address.
This way, cameras will not be able to send the information off the local company network.
Step 2: Assign DNS servers
Assign DNS servers that are local to cameras and force only your domain to be present with zero forwarding DNS servers.
This way, if a camera tries to do name resolution, it will come up blank. Not being able to find the IP address of the main server (mother ship), cameras won’t be able to connect to it.
To stay safe you can order your own DNS servers, locked down to your addresses only.
- Block your camera network’s access to the Internet
Blocking your camera network’s access to the Internet is a good way to make sure hackers won’t be able to get access to the footage and other confidential data. Any dual-homed system touching your camera network should be blocked from Internet access. This way all systems in the same subnet won’t have access to the Internet from that box.
Always use DNS because firewall rules tend to be easy to hack, while DNS that is internal is not expected and stops systems from resolving names you do not wish to be translated, like talking back to the mothership of a bad program.
- Monitor your system for traffic spikes
One of the tricky things about hacker attacks is that there are no warnings. In most cases hackers would penetrate your system without any signs or symptoms of an attack, and it isn’t until you face consequences (like leaked footage or hackers manipulating cameras) when you realize something is wrong. It may be days or even months between the hacker attack and the time you realize the system has been compromised.
Monitoring dual-homed systems for bandwidth spikes could be a good way to spot a hack resulting in the leakage of confidential data like images or video. There are a number of traffic monitoring tools available to private and corporate users that can manage and sniff the network or just monitor them.
- Facial blur in archived footage
Blurring people’s faces when archiving in surveillance camera video streams is a great tool, allowing you to comply with privacy laws and make the footage useless to hackers even if they manage to successfully hack your system.
These recommendations will allow you to lower the risk of hackers breaking into your security camera network, detect the hack if it has occurred already, and to protect yourself from possible consequences if camera footage was stolen.
