Everswitch Access Control Readers(15)
A new anti-vandal, low profile illuminated keypad combines with multi technology reader, iClass, Mifare & DESfire in one reader. All Everswitch access control products utilize the BARAN innovative Piezo technology. The Everswitch keypads rugged, sealed, non-moving one-piece construction sets it apart from any alternative.Add to Compare
Everswitch access control keypads utilize Baran Advanced Technologies patented Piezo technology, constructed of a single piece of anodised aluminum. The keypads are sealed to IP68, against environmental conditions. The legend is anodised into the aluminum and will never wear off. These units are suitable for temperatures ranging from -40 °C to +120°C and withstand humidity up to 100% (actually, they even work when submerged). The Everswitch keypad was tested in excess of 50 million cycles. In addition, the Everswitch access control door unit, which includes PIN/PROX/MAGNETIC reader, was approved by a leading oil producer as the "End of line unit" for their peripheral security systems in refineries worldwide. These ratings are the guarantee to Everswitch quality assurance - furthermore, the Everswitch products are backed by a 5-year unprecedented performance guarantee. Everswitch access control keypads with Piezo technology The Everswitch line of access control keypads are widely used and approved by various governmental agencies. Recently, Everswitch was awarded FAA Certification for the new Cockpit Door Access Control Keypad, giving them the only certified keypad for flight deck doors in the security industry.The Cockpit Door Access Control Keypad joins Everswitch complete line of security products that includes Wiegand keypads, Prox readers and single door access systems and crosses over into a host of other industries. The Everswitch product line is CE certified MIL STD approved and manufactured under ISO 9000 - 2000 standard. Everswitch control keypads use Piezo technology, built of a single piece of aluminum. The entire keypad is filled with a rubbery potting compound that seals the unit completely against environmental conditions. The Everswitch panels are completely sealed with no gaps even for bacteria to hide. Piezo switches are constructed by attaching the piezoelectric material to the back of a metallic membrane. Pushing the membrane results in no discernable movement. And yet, pressure applied to the front of the membrane is converted into a small electric current that is used to switch a secondary circuit. Piezo switches so constructed have no moving parts, no arcing and no openings that invite wetness and dust.The design digits or letters are anodised into the aluminum and will never wear off. These units are suitable for temperatures from -40 °C to +120°C and for humidity up to 100% (actually, they even work when submerged). The Everswitch was tested in excess of 50 million cycles. These ratings are your guarantee to our quality assurance. But even more important, our products are backed by an unprecedented performance guarantee.There are no other keypads on the market that match our capabilities, approvals, specifications and performance guarantees of Everswitch!Add to Compare
The EVERSWITCH™ line of Piezo Electric Human Machine Interfaces from Baran Advanced Technologies spans from single switches via a variety of keypads and control panels to full-size keyboards. All products are rugged, sealed, tamper and vandal-proof solid-state constructions featuring unprecedented durability and reliability.The EVERSWITCH™ family of products has been successfully tested for 50,000,000 cycles including vibration and impact tests. The non-mechanical, fully electronic patented switch technology allows for perfect adaptation to retro fit as well as new designs and interfaces easily with existing systems. The module concept enables us to produce prototypes in an extremely short time with negligible tooling costs. The ASM is equipped with three electronic devices:Magnetic card readerHID proximity card readerPiezoelectric keypadThe iClass/MIFARE/DESFire can read either iClass credentials (transmitting as Wiegand formatted data as encoded), MIFARE® Standard, Ultralight or DESFire® credentials (transmitting Wiegand data based on the cards serial number in 26-, 32-, 34-, 40- or 56-bit formats).The ASM supports the following operation modes:Swipe a valid Magnetic Card in either direction. The unit will read the contents and send it over thedata wires to the host.Enter a PIN code. The unit will send each digit over the same data wires to the host.Present a valid Proximity card. The unit will read and send the data to the host.Add to Compare
The EVERSWITCH anti vandal 13,56 MHz HID reader provides the ultimate solution for users operating in harsh environment high traffic areas or need weatherised door units.Indoor/outdoor design: Sealed in a rugged, weatherised aluminum enclosure the EVERSWITCH is designed to withstand harsh environment, providing reliable performance and is vandal and tamper proof.Easily interfaced: Wiegand output model interfaces with all existing Wiegand protocol access control systems.The EVERSWITCH / HID is:Vandal proofTamper proofWeather proofWater and dust proof (IP68, 100% humidity)Add to Compare
The Everswitch family of indestructible access control products consists of single-door, stand-alone self contained access control keypads. All Everswitch access control products utilize the BARAN innovative Piezo technology. The Everswitch keypad's rugged, sealed, non-moving one-piece construction sets it apart from any alternative.Key features include:Vandal proof Tamper proofWeather proof (-40°C ~ 125° C)Water & dust proof (IP68, 100% humidity)Add to Compare
Browse Access Control Readers
- Keypad Integrated
- Long Range
Access control reader products updated recently
Access control and door entry is a huge responsibility, and challenge, for local authorities and housing associations UK wide. For councils, they’re accountable for the security and safety of many public facilities such as leisure centers, libraries as well as residential housing developments which are often large scale and home to hundreds of people. Housing associations manage affordable rental housing which also means they’re responsible for the appropriate access control management for each individual house or apartment. Technology developments have enabled better entry systems that are far more secure yet also more convenient and easier to manage. For example, with modern intercom and access control systems, remote management and communication is something that offers local authorities and housing associations features that enable them to reduce costs and cut their carbon footprints by managing multiple sites from one place. On the other hand, such technological innovation has meant that local authority and housing association specifiers and consultants now have a wide range of systems and products to choose from which can cause issues in ensuring the right system for a specific building or development is chosen. Choosing an appropritate access control system In choosing an appropriate system, local authorities and housing associations need to opt for a cost effective solution that can be easily maintained with excellent support from the manufacturer and guarantees that the system and system parts will remain supported for the duration of its expected life cycle. It is also important that the chosen system is flexible to cater for the varying needs of the tenants and visitors. Of increasing importance is the reduction of anti-social behavior which new technology can help by providing the use of data loggers which track the use and events of a door entry system, allowing specific evidence to be located by integrating with CCTV. Using technology to our advantage Through advancements in management systems and services, we can gain a much better visual representation of the events and general usage of an intercom entry system and not just its proximity access control. Systems, for example, can now send email alarms or notifications to the administrator or management. We are now able to modify user rights and access levels on the go from a mobile app which enables a much greater control over service and maintenance engineers, such as making sure they have full access when required via an app, rather than arriving to site with the incorrect keys or access fob. Systems, for example, can now send email alarms or notifications to the administrator or management Dealing with tenant’s lost and stolen keys has never been so easy either. The blocking or deletion of lost fobs and adding a new fob can be carried out in minutes while at the same time removing the cost of sending an engineer to the development to program new fobs. This greatly reduces the carbon footprint of the whole task as fobs can now be sent out via mail to a secure location for collection. Technology has also helped local authorities and housing associations to overcome the issue of not being able to have a concierge or building manager available 24/7 at some developments. Now with internet communication, it’s possible for tenants and visitors to get in touch with someone should they need assistance, whether that’s from within the apartment or from an entrance point. For example, lets take the Videx VX2200 with IP concierge integration. This system is exceptionally flexible, enabling calls to be answered on Videx intercoms and also mobile phones if required. With the integration of the IP concierge each block can be either standalone or networked via the internet back to a central control room. Reduced maintenance costs and carbon footprint We work with a wide range of local authorities and housing associations to help them overcome access control and door entry challenges. One organization we have recently partnered with is The Living Group to help them greatly reduce their maintenance costs and carbon footprint by installing the MiAccess offline proximity system on many of their developments across the North East. Technology developments have enabled better entry systems that are far more secure yet also more convenient and easier to manage By installing an appropriate system, The Living Group has managed to overcome issues caused by the existing system’s limitations and also enabled much more flexibility when it comes to effectively managing the access control system of all their included developments. For those responsible for effective and appropriate access control, the management of the systems are easier, quicker and there’s no delay or on-going costs for needing a specialist program to modify fobs and access rights as this can now all carried out in-house. Improved security legislation Further advancements in programmes such as Secured by Design (SBD), a police initiative that improves the security of buildings and their immediate surroundings to provide safe places to live, work and visit, means that there’s more security legislation being implemented that’s making intercoms and access control more secure, without affecting ease and convenience. Videx holds an SBD accreditation and we know, from first-hand experience, how it’s making a difference in keeping tenants safe. When you combine the safety features promoted by an SBD member company like ourselves with the likes of the Videx event logging, image capture and ability to modify access users on the go, for example, we can help to create a very safe and secure environment. Personally, I think there needs to be a greater emphasis on the role of security legislation Technology has completely transformed the way local authorities and housing association are able to choose, install and manage door entry and access control systems for tenants and visitors alike. Personally, I think there needs to be a greater emphasis on the role of security legislation such as Secured by Design to ensure all councils and housing association consultants are up to date with what constitutes a robust and secure system that’s also cost effective too. In my role, I see weaknesses in systems and constant ongoing costs that could easily be avoided. For instance, features such as timed remote entry means local authority and housing association management no longer need to worry about keys being lost, the wrong keys being supplied or locks needing to be changed. With new systems such as the Videx MiAccess and Videx WS4 range, we can help to massively reduce a housing association’s or council’s carbon footprint and engineer costs by allowing them the access to management and control from an offsite location. Crime prevention We can also use live and logged events to help prevent crime in different ways, from antisocial behavior growing around a tenant being called or visited much more regularly than others, to knowing a tenant is currently still living at a property but isn’t paying rent or answering to any correspondence. Technology enables local authorities and housing associations to receive detailed data and therefore behavioral insights on the people under their management and care. If consultants and specifiers are advised on the most appropriate systems that meet their specific entry needs, they can ensure greater, safer and more convenient access control that meets the requirements of both the end user and the those responsible for its effective management.
Motion detection is a key feature of security systems in residential and commercial environments. Until recently, systems have relied heavily on closed circuit television (CCTV) and passive infrared (PIR) sensors, which both require significant investment and infrastructure to install and monitor. Developments in wireless technology are increasing home security possibilities. Few years ago, these developments led Cognitive Systems to discover that the wireless signals surrounding oneself can be used to detect motion. Known in the wireless industry as WiFi sensing, this technology brings many benefits that other motion detection solutions have not been able to provide. The working of WiFi sensing At Cognitive Systems, the company has used WiFi sensing technology to develop a motion detection solution called WiFi Motion™, which measures and interprets disruptions in RF signals transmitted between WiFi devices. When movement occurs in a space, ripples in the wireless signals are created. WiFi Motion interprets these ripples and determines if an action, such as sending a notification, is needed. Enabling this functionality in a space is incredibly simple. With a software upgrade to only one’s WiFi access point (or mesh router), motion sensing capabilities are layered into one’s WiFi network. Existing connected WiFi devices then become motion detectors without detracting from their original functions or slowing down the network. Using artificial intelligence (AI), WiFi Motion establishes a benchmark of the motionless environment and learns movement patterns over time, which could be used to predict trends. This allows unusual movement patterns to be detected with greater accuracy while decreasing the potential for costly false alerts. WiFi Motion requires no line-of-sight or installation WiFi sensing and other home monitoring solutions All of these capabilities are made possible by WiFi sensing and together create a motion detection system that provides unparalleled accuracy, coverage, privacy and affordability compared to other solutions on the market. PIR integration is far more complex and imposes electronic and physical design restrictions compared to WiFi sensing. In terms of placement, PIR systems are difficult to install, requiring line-of-sight and a device in every room for localization. WiFi Motion requires no line-of-sight or installation and is also a scalable solution compared to PIR. Much like cameras, PIRs can only cover so much space, but WiFi Motion can cover the entire home and even detect motion in the dark and through walls, without adding additional devices to the home. WiFi Motion detects less distinguishing context than cameras and microphones, but more context than regular PIR sensors for the perfect balance of privacy and highly accurate motion detection. Privacy solution While cameras have been the security solution for years, WiFi Motion offers a more affordable solution that can rival the privacy and coverage capabilities of even the most high-end cameras. With such a wide coverage area, one might think that WiFi sensing infringes on privacy, but actually, the opposite is true. With WiFi Motion, the contextual information collected cannot be used to identify a specific individual, unlike cameras which can clearly identify a person’s face or microphones, which can identify a person’s voice. It is different from other smart home security options that use cameras and microphones because it only senses motion using WiFi signals - it doesn’t “see” or “listen” like a camera or microphone would. This provides opportunities for added security in spaces where privacy might be a concern and installing a camera may not be a comfortable solution, such as bathrooms and bedrooms. The data collected is also anonymized and highly encrypted according to stringent industry privacy standards. Existing connected WiFi devices then become motion detectors Additional WiFi sensing applications Since WiFi sensing technology requires no additional hardware or subscription fees, it is much more affordable than other motion detection solutions. It can be used as a standalone solution, or it can be easily layered into more complex systems. This ease of integration, scalability and relatively low cost brings a lot of potential for various applications. Motion detection can trigger other smart devices in the network to turn lights on or off In eldercare, for example, WiFi sensing can be used to help seniors live comfortably in their homes for as long as possible. With the increasing aging population and high costs associated with care homes, the market for this application is considerable. Caregivers can use an app to monitor movement in their loved one’s home and be alerted about unusual movement patterns that could indicate a concern. For smart homes and other environments that have a network of smart devices, the artificial intelligence (AI) component of the technology allows for improvements to automated features. Motion detection can trigger other smart devices in the network to turn lights on or off or make adjustments to the temperature in a room. Security for the commercial sector For office buildings and other commercial properties, it is easy to see how all of these features could be scaled up to offer a highly accurate and cost-effective motion sensing and smart device automation solution. Cognitive Systems is closely involved with the development of WiFi sensing technology, working with various industry groups to establish standards and help it reach its full potential. WiFi Motion is merely the tip of the iceberg in terms of motion sensing possibilities, but its applications in the world of security are undeniably compelling. It is an exciting time for the wireless industry, as one works with stakeholders in the security space to explore everything this technology can do.
The emergence of smartphones using iOS and Android is rapidly changing the landscape of the IT industry around the world. Several industries, such as digital cameras, car navigation, MP3, and PNP, have been replaced by equivalent or even better performance using smartphones. Smartphones provide increasing portability by integrating the functions of various devices into a single unit which allows them to connect to platforms with network-based services and offer new services and conveniences that have never been experienced before. These changes have expanded into the access control market. Although not yet widespread, ‘Mobile access cards’ is one of the terminologies that everyone has been talking about. RF cards used for access security are being integrated into smartphones just as digital cameras and MP3s were in the past. While people might forget their access cards at home in the morning, they seldom forget their smartphones. Using smartphones for access control increases entry access reliability and convenience. Mobile/smartphone access control A key aspect of mobile credential is that it makes it possible to issue or reclaim cards without face-to-face interaction As in other markets, the combination of smartphones and access cards is creating a new value that goes beyond the simple convenience of integration enhancing the ability to prevent unauthorized authentication and entrance. People sometimes lend their access cards to others, but it is far less likely they might lend their smartphone with all their financial information and personal information – to another person. This overcomes an important fundamental weakness of RF cards. Another valuable aspect of mobile credential is that it makes it possible to issue or reclaim cards without face-to-face interaction. Under existing access security systems, cards must be issued in person. Since card issuance implies access rights, the recipient’s identification must be confirmed first before enabling the card and once the card has been issued, it cannot be retracted without another separate face-to-face interaction. Mobile access cards In contrast, mobile access cards are designed to transfer authority safely to the user's smartphone based on TLS. In this way, credentials can be safely managed with authenticated users without face-to-face interaction. Mobile cards can be used not only at the sites with a large number of visitors or when managing access for an unspecified number of visitors, but also at the places like shared offices, kitchens and gyms, currently used as smart access control systems in shared economy markets. The market share of mobile access cards today is low even though the capability can offer real benefits to users and markets. While the access control market itself is slow-moving, there are also practical problems that limit the adoption of new technologies like mobile access cards. Use of Bluetooth Low Energy technology While NFC could be an important technology for mobile credential that is available today on virtually all smartphones, differences in implementation and data handling processes from various vendors prevents universal deployment of a single solution to all devices currently on the market. Accordingly, Bluetooth Low Energy (BLE) has been considered as an alternative to NFC. Bluetooth is a technology that has been applied to smartphones for a long time, and its usage and interface are unified, so there are no compatibility problems. However, speed becomes the main problem. The authentication speed of BLE mobile access card products provided by major companies is slower than that of existing cards. Enhancing credential authentication speed Authentication speed is being continuously improved using BLE's GAP layer and GATT layers The second problem is that mobile access cards must be accompanied by a supply of compatible card readers. In order to use mobile access cards, readers need to be updated but this is not a simple task in the access control market. For 13.56 MHz smart cards (which were designed to replace 125 kHz cards), it has taken 20 years since the standard was established but only about half of all 25 kHz cards have been replaced so far. Legacy compatibility and the need for equivalent performance, even with additional benefits, will drive adoption timing for the Access Control market. While BLE technology helps resolve the compatibility problem of mobile access cards, it can identify some breakthroughs that can solve the speed problem. Authentication speed is being continuously improved using BLE's GAP layer and GATT layers, and new products with these improvements are now released in the market. Making use of key improvements allows Suprema's mobile access card to exhibit an authentication speed of less than 0.5 seconds providing equivalent performance to that of card-based authentication. AirFob Patch MOCA System's AirFob Patch addresses the need for technological improvements in the access control market in a direct, cost effective, and reliable way – by offering the ability to add high-performance BLE to existing card readers – enabling them to read BLE smartphone data by applying a small adhesive patch approximately the size of a coin. This innovative breakthrough applies energy harvesting technology, generating energy from the RF field emitted by the existing RF reader – then converting the data received via BLE back into RF – and delivering it to the reader. By adding the ability to use BLE on virtually any existing RF card reading device, MOCA allows greater ability for partners and end users to deploy a technologically-stable, high performance access control mobile credential solution to their employees, using devices they already own and are familiar with. Adding MOCA AirFob Patch eliminates the need to buy and install updated readers simply to take advantage of mobile credential, lowering costs and risks, and increasing employee confidence and convenience. Growth forecast of mobile access card market in 2020 In 2020, forecasts show that the mobile access card market will grow far more rapidly Several companies have entered the mobile access card market, but they have not set up a meaningful product solution stream until 2019. In 2020, forecasts show that the mobile access card market will grow far more rapidly. Reviewing new entries into the market allows identification of the latest products that provide improving solutions to compatibility and speed problems. MOCA AirFob Patch addresses development plans in process today that overcome the legacy installed base of card readers – allowing rapid creation of an environment that can make immediate use of BLE mobile access cards. Integrated mobile digital ID With proven usability and within suitable environments, mobile access cards will also begin to make inroads into other markets, not just the access control market. In the sharing economy market, which seeks access management without face-to-face interaction, the integrated mobile digital ID led by the 'DID Alliance' will serve as a technical tool that can be used in access authentication – forging increasing links between the access control and digital ID markets.
HID will highlight its new iCLASS SE Encoder at ASIS 2013 HID Global, a worldwide leader in secure identity solutions, is demonstrating its new iCLASS SE platform and secure identity solutions at ASIS International 2013 in Chicago. The company will highlight its new iCLASS SE Encoder for locally encoding credentials and managing keys and showcase its expanded pivCLASS Government Solutions portfolio. In addition to demonstrating its broad range of solutions for creating, using and managing secure identities, the company’s new experience zones will feature products and services that address the specific needs of Government, Healthcare, Enterprise, Education, Financial and Banking markets. At ASIS 2013, HID Global will demonstrate its extensive portfolio of secure identity solutions in booth #329 at McCormick Place, South Hall from September 24-26, 2013. Announcements Include: HID Global Extends Its iCLASS SE Platform with Credential Encoding Solution that Simplifies Migration to Higher Security and Mobile Access HID Global Expands pivCLASS Portfolio to Include Credential Registration and Verification of FIPS 201-based Credentials for Government Agencies Top Demonstrations Include: Card and Reader Migration Solutions: for moving to higher security, interoperability and mobile access. Demonstrations will include HID Global’s iCLASS platform readers and smart cards including its iCLASS Seos credential for powering mobile access, and its new iCLASS SE Encoder that enables organizations to encode/manage credentials and configure readers. The multi-technology encoder makes it possible for customers to format a number of credential technologies using a single device, on demand. Government Solutions: featuring pivCLASS solutions that enable government agencies to comply with physical access control mandates to PIV-enable their existing physical access control systems (PACS) to meet any mandated assurance level without requiring a “rip and replace” of their existing PACS infrastructure. The recently expanded pivCLASS portfolio includes an extensive line of solutions for credential registration and verification of FIPS 201-based credentials from Codebench, part of HID Global. The recently expanded pivCLASS portfolio includes an extensive line of solutions for credential registration and verification of FIPS 201-based credentials from Codebench, part of HID Global Healthcare Solutions: that enhances workflow efficiencies and help meet regulatory compliance while increasing security without sacrificing convenience. Demonstrations will include: EasyLobby Visitor Management Solutions for visitor registration, badge printing, tracking and reporting; Genuine HID Technology in partner terminals; and HID Secure Identity Services that help customers manage the daily flow of ID card badge requests and large-volume re-badging projects as well as combine multiple technology platforms onto one credential and “tap in /out” authentication with OMNIKEY desktop readers. Enterprise Solutions: to help organizations maintain operational efficiency and reduce costs, while providing optimum security for their facilities and properties. Demonstrations will include: HID Global’s FARGO HDP5000 Printer/Encoder; iCLASS SE readers with OSDP; ActivID Authentication for secure computer log-on and identity verification; one-time password (OTP) tokens; and EDGE EVO and VertX EVO IP-enabled open architecture access control solutions. Education Solutions: for educational institutions with unique requirements for securing their facilities, improving administrative efficiencies, and doing more than opening doors with student ID badges. Higher education demonstrations will include: iCLASS SE Magstripe readers, EDGE EVO networked access control products, mobile access solutions including iCLASS Seos credentials that can be embedded into NFC-enabled smartphones, and the HDP8500LE Industrial Series Card Printer/Laser Engraver for high duty cycle, high-volume ID programs with Asure ID card personalisation software. Additional demonstrations in the K-12 zone will showcase enterprise-class EasyLobby Visitor Management Solutions and FARGO Direct-to-Card (DTC) Printer/Encoders. HID Global’s strategic partners offer RFID and contactless solutionsthat use Genuine HID Technology to solve enterprise business problems Financial and Banking Solutions: for financial institutions to secure buildings, control access to critical network resources and sensitive data, and secure online banking services for their customers. Demonstrations will include: ActivID solutions that provide five critical layers for true, multi-factor authentication to enable trusted online transactions; Crescendo smart cards for strong PKI-based authentication supporting logical and physical control; and OMNIKEYdesktop readers. Partner Solutions: HID Global’s strategic partners offer RFID and contactless solutions that use Genuine HID Technology to solve enterprise business problems. Access control solutions that extend the use of a single secure credential will be on display by Networked Access Solutions, and HID Connect, partners including AMT, ASSA ABLOY, Baran Advanced Technologies Ltd., Freedom Pay, Innometriks, Integrated-MATRIX-Solutions, Essex Electronics, Inc., PCSC and others. During ASIS International Security Conference and Exposition, HID Global executives will present at their annual educational luncheon and other ASIS events: “Leading Change in the Secure Identity Ecosystem – HID Global president and CEO Denis Hébert will moderate a panel with leading organizations AIG, Academy Of Art University and Houston Methodist Hospital to discuss how they are working with HID Global to significantly improve their access control infrastructure. The organizations will explain how the changes they are making to their access control systems are delivering tangible value today, while better positioning their organizations for future benefits including the addition of mobile credentials on smartphones. The luncheon is being held on Tuesday, September 24, 2013. Customers interested in attending can contact HID Global. “Cryptography and PKI in Access Control,” Session 2306 – Robert Fontana, vice president of engineering, Federal Identity Solutions with Codebench, part of HID Global, on Tuesday, September 24 from 4:30 p.m. to 5:30 p.m. The session is sponsored by ASIS Information Technology Security Council and ASIS Critical Infrastructure Working Group.
HID will also demonstrate its suite of technologies, products and services at ASIS 2012 HID Global, trusted leader in solutions for the delivery of secure identity, recently announced it will showcase its comprehensive range of breakthrough innovations to create, use and manage secure identity at next week’s ASIS International 2012 in Philadelphia. In addition to announcing the latest additions to its award-winning iCLASS SE® platform that provides the highest level of security, privacy and portability, the company will also conduct live demonstrations of its mobile access solutions. HID Global will demonstrate its extensive suite of technologies, products, solutions and services in Booth 1509 at the Pennsylvania Convention Center from September 10-13, 2012, including: Solutions for creating a secure identity Secure Identity Services: A comprehensive suite of services to help customers address every aspect of requirements for cards and digital credentials for mobile access, including managing the daily flow of ID card badge requests, large-volume re-badging projects, and combining multiple technology platforms onto one credential. PIV Enablement Solutions: pivCLASS® solutions that allow U.S. Federal Government agencies, contractors and other facilities to PIV-enable their existing physical access control systems to meet any mandated assurance level without requiring a “rip and replace” of their existing PACS infrastructure. Card Personalisation Solutions: HID Global will showcase its FARGO® HDP8500 Industrial Series Card Printer/Encoder for high duty cycle, high-volume ID programs; its FARGO Direct-to-Card (DTC) and High Definition Printing™ (HDP®) printer/encoder solutions; and Asure ID® card personalisation software. Visitor Management Solutions: HID’s EasyLobby® visitor management solutions for visitor badges and detailed visitor logs. Embedded Technologies: Embedded platforms to enable third parties to develop hardware that works within the Genuine HID™ ecosystem including the new iCLASS SE Reader module and the SIO® Processor that can be used across a variety of platforms to SIO-enable third-party hardware. Partner Solutions: Access control solutions that expand the use of Genuine HID Technology™ will be on display by key Networked Access and HID Connect® partners including AMT, ASSA ABLOY, Baran/EverSwitch, Essex Electronics FreedomPay, Innometriks, NetAccess Controls and PCSC. Solutions for using secure identity Genuine HID Credentials and Readers: New Crescendo® credentials for strong PKI-based authentication supporting logical and physical control. Also highlighted will be its new OMNIKEY desktop readers in addition to HID’s new iCLASS SE platform credentials and reader solutions and its line of iCLASS SE/multiCLASS SE readers for higher security and migration to mobile access. Networked Access Solutions: Next generation EDGE EVO and VertX EVO™ IP-enabled access control solutions for fully distributed intelligence and decision making at the door. Solutions for managing secure identities Mobile Access Solutions: HID’s technology-independent iCLASS SE access control platform that delivers advanced security, portability and flexibility, while enabling the use NFC-enabled smartphones for access control and other applications. Come see our 2012 “ASIS Accolades Security’s Best” award-winning solution. Credential Management Solutions: ActivID Credential Management System appliance for easy issuance and management of strong and PKI-enabled smart cards and credentials, Authentication Solutions: naviGO, 4TRESS Authentication for secure computer log-on and identity verification, and one time password (OTP) tokens.
Baran Access Solutions, subsidiary of Baran Advanced Technologies Ltd., will leverage the Piezo technology in its product line New and old have come together with the launch of Baran Access Solutions, a reorganization of the familiar Barantec family of products that will now concentrate on access control solutions, including Everswitch single-door keypads and controllers, contactless smart card readers, proximity readers and magstripe readers. As part of the restructuring, security industry veteran and RFID technology expert, Bill Newill, has been named the company's president. The company is setting up its corporate offices in southern California. "Baran Access Solutions can now concentrate its efforts on the unique demands of the access control market without being distracted by ancillary products," said Newill. "In the end, greater focus will translate to tighter internal processes, better engineered products and a higher level of customer satisfaction." The new company will leverage the patented and highly reliable Piezo technology in its product line. "Having access to this industry-leading technology gives us a huge leg up on the competition," Newill added. Baran Access Solutions will begin by focusing specifically on the manufacture and delivery of access control solutions for commercial customers Baran Access Solutions is a subsidiary of Baran Advanced Technologies Ltd. and the Baran Group, a global leader in engineering, technology and construction services and a name which has come to epitomize excellence. While the Baran brand is not as familiar in the United States, Newill and the rest of the company's senior management team understand the deep roots of Baran Access Solutions' parent companies - and are fully committed to continuing the Baran tradition of excellence. Baran Access Solutions will begin by focusing specifically on the manufacture and delivery of access control solutions for commercial customers throughout the United States and Canada and gradually extend its reach globally.
Related white papers
Physical Access Control In Higher Education
5 Reasons To Integrate Mobile Technology Into Your Security Solution
11 Considerations For Embedded System RFID Readers
10 Step Guide to Staying Ahead of Emerging Security ThreatsDownload
2021 Trends in Video SurveillanceDownload
Exploring New Vertical Markets for Professional Security SystemsDownload
Capture New Opportunities With Computer Vision And Video AnalyticsDownload
HID Global Provides Mobile Access Solution To Avolon To Create Secure And Convenient Employee Experiences
Nortech Control Systems Provides UPASS Long-Range Reader And Tags To Facilitate Asset Management At Border Caravan Storage Site
- HID Global Provides Mobile Access Solution To Avolon To Create Secure And Convenient Employee Experiences
- Nortech Control Systems Provides UPASS Long-Range Reader And Tags To Facilitate Asset Management At Border Caravan Storage Site
- Sydney’s Gateway Building integrates Boon Edam Turnstiles with IDEMIA’s MorphoWave touchless scanners and Honeywell access control
- IDEMIA Installs Biometric Access Control Solution With MorphoWave Compact Devices And Digicon DFlow Speedgates At Paris HQ