Access control cards/ tags/ fobs - Expert commentary

Automatic Gates: Making The Right Investment For Access Control
Automatic Gates: Making The Right Investment For Access Control

The experience of the COVID-19 pandemic has made us all more conscious of who is coming and going from our property. Whether it is a family home, business premises or public building, property owners want full control over access for protection and peace of mind. As a provider of access control technologies, we are seeing a growing demand for automated gates with a variety of access control systems. There are a number of considerations that buyers need to make when investing. And as an installer, there is advice that you can offer to help your clients make the right choice for their property. Here are some of the key considerations you’ll need to make and discuss with your client. Whomever you buy from, you should be offered more than a simple instruction manual. Electronic locks, magnetic locks and code security In the first instance, you’ll need to advise on the type of lock and access control available. Electronic locks release on the operation of the automation system to allow the gates to open. Locks are required for all non-locking (also known as reversible) operators and are recommended for any gate on a multi-user site or any gate over 2.5m. Apply the same logic to an automated gate as you would to a domestic door – for example, you wouldn’t fit your front door with a lock on the same side as the hinges or a drop bolt at the hinge end of a manual gate so why dispense with this logic when the gate is automated? Electronic locks release on the operation of the automation system to allow the gates to open There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks. These are all designed for external use. While the gate itself will provide physical security, the customer will want to feel in control of who enters their property, when and for what purpose. Consider access for mail and deliveries, waste disposal and visitors arriving on foot etc. There is a range of options available. Intercom systems will allow the user to vet visitors, keypad entry can allow remote access for visitors with a specific code, remote controls allow an oncoming driver to open the gates without getting out of the vehicle, and a timer control can be used to open or close the gates at certain times of the day. Vehicle detection loops can be installed discreetly under the tarmac allowing the presence of vehicles to exit the gates and prevent closing while obstructed. Sliding gates versus swinging gates There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks Gates can be automated to either swing or to slide open and in the case of swinging gates, the opener may be concealed underground or gate mounted. The most suitable opener for your installation will depend on the space available and the type of gate selected. Concealed underground automation is ideal for highly ornate gates. However, where gates are fully infilled (typical of many timber designs), gate mounted openers are concealed from the front of the gate by the gate leaf and present a cost-effective option. The choice between slide and swing is largely down to space - swing gates require a clear space for their opening arc while sliding gates require space to one or both sides of the gate. Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited, as they use the least space when opening. Voltage Most swing gate and sliding systems are available in 24v or 230v. The 24v systems still need 230v mains power – there is a transformer built into the 24v control panels. Deciding which voltage to use can include a combination of factors such as the material of the gates, the location of the system and the safety features you want. Concealed underground automation is ideal for highly ornate gates With wrought iron gates, the wind can pass through them whereas with fully boarded wooden gates (popular because they give full privacy) the wind has nowhere to go, so they act like sails. For commercial or industrial applications with larger entrances and a heavy gate, you may need 3 Phase 400v power (sliding gates only). Installing gate motors in confined spaces The environment in which you are fitting may well influence which gate and motor you recommend. Will it be in an exposed area which is subject to the elements? Will it be positioned on a slope? Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited Installers have always faced the challenge of installing gate motors in confined spaces. When fitting a pedestrian gate, there is often limited space in which to work – potentially making an installation time consuming and technically demanding. If this is the case for you, consider a gate operator which is designed specifically for installations with limited space for maneuver. An example of this is the E5 compact gate operator. The operator is not only small but has an optional slide lever attachment designed for installations where there is extremely limited space, meaning that just 8cm of the pillar is needed for installation. What’s more, improved fixing points and a simple ‘hook and fasten’ process means assembly is safe, quick and straight forward. Ultimately, you’ll be looking for a good quality, reliable product with good service. Work with a supplier that offers more than just a manual. If they are happy to offer training, their time and advice when you buy, the chances are you’ll get their support long term.

4 Ways To Keep Your Workplace Protected From COVID-19
4 Ways To Keep Your Workplace Protected From COVID-19

The unprecedented global impact of COVID-19 has taken its toll on all of us, but as cases of the virus thankfully recede, employers are now forced to confront how they can enable a safe return to work for employees. For many employers, this means they will have to carry out a COVID-19 risk assessment, redesign workspaces to maintain social distances, carry out more frequent cleaning, manage the transmission risk and find alternatives to touch-based security devices. Protecting workplace occupants in any emergency requires preparation and clear communication. This is especially critical in a health crisis involving an infectious disease. These are some of the essential best practices that could help organizations reduce the impact on their employees and operations during this pandemic. 1. Use a visitor management system With a visitor management system, organizations have a single source of real-time and historical insights into who is, or was recently, in the workplace. This is especially important because of the need to perform contact tracing should anyone in the organization show symptoms of COVID-19, meaning everyone they have been in contact with needs to be contacted and asked to isolate. Yet still, first impressions are made at the front desk or lobby, where the visitor experience needs to be a positive one. At the same time, though, any emergency event requires that there be strict control over who is entering the workplace. This policy also needs to be clearly communicated to visitors. Doing this minimizes risk to visitors as well as the workforce. In addition to delivering a high-quality visitor experience, the ideal visitor management system must: Enable organizations to meet regulatory compliance mandates and facilitate check-in at a self-service kiosk to minimize wait times. Customize the visitor experience to support specific security needs, such as accelerating and simplifying check-in or requiring additional security pre-checks. Automate compliance as it relates to visitor access rules with historical visit reports. 2. Pre-check questions at visitor registration kiosks Organizations can strengthen security at the registration kiosk using a flexible, enterprise-grade visitor management system to add visitor sign-in steps. This has proven successful in the past when used to control the spread of infectious disease during an outbreak. An example of this is a U.S. children's hospital which managed to reduce facility infection rates by 25 percent over a two-year period using a commercial, off-the-shelf physical identity and access management (PIAM) solution from HID Global. The solution provides two particularly important capabilities that can be used by organizations to protect their workplace from the uncontrolled spread of an infectious disease: Enhance visitor registration policy with additional mandatory questions to help identify any visitors who may need other screenings. Extend the visitor registration kiosk with a mandatory pop-up asking further questions during visitor check-in. 3. Understand who has visited your workplace Successful controlling the spread of infection throughout a facility requires the ability to automatically maintain an auditable trail of activity. This can be done using an enterprise-grade visitor management system that makes it easy to retrieve historical visit reports. This provides a timeline of who was in the workplace, and when they were there. Key features include: A single dashboard providing useful visitor insights at your fingertips. Historical reports that provide visitor details including location and contact information, all in compliance with General Data Protection Regulation (GDPR) and other privacy regulations. 4. Clearly communicate how infection risks can be reduced Global organizations must actively communicate with visitors and employees on the outbreak of infectious diseases and follow best practices outlined by the World Health Organization (WHO). Here are several things organizations can do in this area to help maintain a safe and healthy workplace: Re-enforce and communicate WHO best practices with guideline posters in the front lobby and throughout the workplace. Add posters that also encourage regular and thorough washing of hands. Encourage everyone to cough or sneese into their shirt sleeve in their flexed elbow or cover their mouth and nose with a tissue. Encourage everyone to keep a relatively safe distance from each other and use alternatives to handshakes when saying hello. Organizations must contend with a variety of workplace challenges during the outbreak of an infectious disease. These challenges can be solved with best practices that include a comprehensive visitor management system that automates critical check-in policies and maintains an auditable trail of visitor activity.  

The Growth Of The Mobile Access Card Market In 2020
The Growth Of The Mobile Access Card Market In 2020

The emergence of smartphones using iOS and Android is rapidly changing the landscape of the IT industry around the world. Several industries, such as digital cameras, car navigation, MP3, and PNP, have been replaced by equivalent or even better performance using smartphones. Smartphones provide increasing portability by integrating the functions of various devices into a single unit which allows them to connect to platforms with network-based services and offer new services and conveniences that have never been experienced before. These changes have expanded into the access control market. Although not yet widespread, ‘Mobile access cards’ is one of the terminologies that everyone has been talking about. RF cards used for access security are being integrated into smartphones just as digital cameras and MP3s were in the past. While people might forget their access cards at home in the morning, they seldom forget their smartphones. Using smartphones for access control increases entry access reliability and convenience. Mobile/smartphone access control A key aspect of mobile credential is that it makes it possible to issue or reclaim cards without face-to-face interaction As in other markets, the combination of smartphones and access cards is creating a new value that goes beyond the simple convenience of integration enhancing the ability to prevent unauthorized authentication and entrance. People sometimes lend their access cards to others, but it is far less likely they might lend their smartphone with all their financial information and personal information – to another person. This overcomes an important fundamental weakness of RF cards. Another valuable aspect of mobile credential is that it makes it possible to issue or reclaim cards without face-to-face interaction. Under existing access security systems, cards must be issued in person. Since card issuance implies access rights, the recipient’s identification must be confirmed first before enabling the card and once the card has been issued, it cannot be retracted without another separate face-to-face interaction. Mobile access cards In contrast, mobile access cards are designed to transfer authority safely to the user's smartphone based on TLS. In this way, credentials can be safely managed with authenticated users without face-to-face interaction. Mobile cards can be used not only at the sites with a large number of visitors or when managing access for an unspecified number of visitors, but also at the places like shared offices, kitchens and gyms, currently used as smart access control systems in shared economy markets. The market share of mobile access cards today is low even though the capability can offer real benefits to users and markets. While the access control market itself is slow-moving, there are also practical problems that limit the adoption of new technologies like mobile access cards. Use of Bluetooth Low Energy technology While NFC could be an important technology for mobile credential that is available today on virtually all smartphones, differences in implementation and data handling processes from various vendors prevents universal deployment of a single solution to all devices currently on the market. Accordingly, Bluetooth Low Energy (BLE) has been considered as an alternative to NFC. Bluetooth is a technology that has been applied to smartphones for a long time, and its usage and interface are unified, so there are no compatibility problems. However, speed becomes the main problem. The authentication speed of BLE mobile access card products provided by major companies is slower than that of existing cards. Enhancing credential authentication speed Authentication speed is being continuously improved using BLE's GAP layer and GATT layers The second problem is that mobile access cards must be accompanied by a supply of compatible card readers. In order to use mobile access cards, readers need to be updated but this is not a simple task in the access control market. For 13.56 MHz smart cards (which were designed to replace 125 kHz cards), it has taken 20 years since the standard was established but only about half of all 25 kHz cards have been replaced so far. Legacy compatibility and the need for equivalent performance, even with additional benefits, will drive adoption timing for the Access Control market. While BLE technology helps resolve the compatibility problem of mobile access cards, it can identify some breakthroughs that can solve the speed problem. Authentication speed is being continuously improved using BLE's GAP layer and GATT layers, and new products with these improvements are now released in the market. Making use of key improvements allows Suprema's mobile access card to exhibit an authentication speed of less than 0.5 seconds providing equivalent performance to that of card-based authentication. AirFob Patch MOCA System's AirFob Patch addresses the need for technological improvements in the access control market in a direct, cost effective, and reliable way – by offering the ability to add high-performance BLE to existing card readers – enabling them to read BLE smartphone data by applying a small adhesive patch approximately the size of a coin. This innovative breakthrough applies energy harvesting technology, generating energy from the RF field emitted by the existing RF reader – then converting the data received via BLE back into RF – and delivering it to the reader. By adding the ability to use BLE on virtually any existing RF card reading device, MOCA allows greater ability for partners and end users to deploy a technologically-stable, high performance access control mobile credential solution to their employees, using devices they already own and are familiar with. Adding MOCA AirFob Patch eliminates the need to buy and install updated readers simply to take advantage of mobile credential, lowering costs and risks, and increasing employee confidence and convenience. Growth forecast of mobile access card market in 2020 In 2020, forecasts show that the mobile access card market will grow far more rapidly Several companies have entered the mobile access card market, but they have not set up a meaningful product solution stream until 2019. In 2020, forecasts show that the mobile access card market will grow far more rapidly. Reviewing new entries into the market allows identification of the latest products that provide improving solutions to compatibility and speed problems. MOCA AirFob Patch addresses development plans in process today that overcome the legacy installed base of card readers – allowing rapid creation of an environment that can make immediate use of BLE mobile access cards. Integrated mobile digital ID With proven usability and within suitable environments, mobile access cards will also begin to make inroads into other markets, not just the access control market. In the sharing economy market, which seeks access management without face-to-face interaction, the integrated mobile digital ID led by the 'DID Alliance' will serve as a technical tool that can be used in access authentication – forging increasing links between the access control and digital ID markets.

Latest BQT Solutions (UK) Ltd news

Ava Group To Showcase Its Portfolio Of Security Solutions At ISC West 2019
Ava Group To Showcase Its Portfolio Of Security Solutions At ISC West 2019

Ava Group (AVA), a provider of security risk management services and technology will be showcasing its portfolio of security solutions at ISC West - Las Vegas, booth 25103. ISC West is the largest converged security industry trade show in the US with the exhibition taking place from April 10-12th. The event provides a major platform for professional networking, sourcing new suppliers and introducing new products and technologies, encompassing everything from access control to unmanned vehicles. ISC West also includes the SIA Education@ISC conference program, running from April 9-11th. Risk Management Services Ava Group’s technology division incorporates two well established security risk management companies - Future Fibre Technologies (FFT) and BQT Solutions, both of which will be on the booth this April. As a provider of risk management services and technologies, Ava Group offers a portfolio of complementary solutions encompassing both fiber optic intrusion detection as well as high security access control and locking. Ava Group is proud to present the latest solutions from its technology division, namely the Orca lock and latest enhancements to the Aura Ai-2 controller Ava Group is proud to present the latest solutions from its technology division, namely the Orca lock and latest enhancements to the Aura Ai-2 controller. The enhanced Aura Ai-2 from Future Fibre Technologies features unrivalled high-sensitivity detection, location accuracy, cut resilience capability and the industry’s longest linear range. Outdoor Locking Solution This product features new ultra-low noise optical detection electronics. This ensures a single controller can cover a distance up to 110 kilometers, accurately detecting, locating and reporting multiple disturbances to just +/- two meters. BQT Solutions will be demonstrating the new high-strength Orca lock (YG80) – providing ultimate security for all environments. Building on the success of the award winning YG10, the Orca lock is designed for securing gates, roller doors, shipping containers and any other large door or entryway. Alongside the Orca’s impressive physical attributes, a unique feature is its ability to fully integrate into an access control system, surpassing any other solutions available in the market. Orca is fully monitored, weatherproof, and user configurable - providing the perfect indoor and outdoor locking solution. Real-World Projects The Ava Group team will be on hand to explain how its solutions are being used in real-world projects to address the latest threats As well as getting to know the product range, the Ava Group team will be on hand to explain how its solutions are being used in real-world projects to address the latest threats. Newly appointed Chief Operating Officer, Scott Basham commented, “We’ve seen continued growth in demand for our products in the US market and returning to ISC West provides us with a perfect platform to showcase our broad range of capabilities and explain to visitors how our product range can be applied to meet their particular needs. We always welcome the opportunity to be face-to-face with our customers worldwide and thoroughly enjoy being able to engage directly with the market in this way.” Fiber Sensing Technology Alongside their presence in the exhibition hall, Ava Group’s CTO – Technology, Dr Jim Katsifolis will be presenting ‘Fiber Optic Perimeter Intrusion Detection Systems (PIDS): Trends, Myths and Realities Revealed’ 10:15 am on April 9th, Sands 302. This presentation promises to cover how best to select appropriate fiber sensing technology products when specifying, as well as how to assess the true performance of such PIDS systems. With over 1,000 exhibitors and brands and an anticipated 30,000 security professionals, ISC West is a must-visit for anyone in the security risk industry.

AVA Group To Showcase Security Solutions Alongwith FFT And BQT Solutions At Intersec Dubai 2019
AVA Group To Showcase Security Solutions Alongwith FFT And BQT Solutions At Intersec Dubai 2019

Ava Group (AVA), a provider of security risk management services and technology will be showcasing its portfolio of security solutions at Intersec Dubai 2019, stand S3-C48. Intersec Dubai features a rich selection of exhibitors in Security, Safety & Fire Protection, attracting visitors from the Middle East, Africa, the Indian subcontinent and well beyond. Ava Group will be presenting the latest exciting solutions from its technology division - which incorporates Future Fibre Technologies (FFT) and BQT Solutions. As a provider of risk management services and technologies, Ava Group offers a portfolio of complementary solutions encompassing both fibre optic intrusion detection and high security access control and locking. Increased Investment As a key event for the region and beyond, Intersec Dubai is the perfect way for security providers and buyers to start 2019" Mark Horton, Global Sales & Marketing Director commented, “As a key event for the region and beyond, Intersec Dubai is the perfect way for security providers and buyers to start 2019. Our solutions offer the very latest in security technology and the highest levels of protection, key benefits that we know are always well-received by visitors at the event.” Mark continued, “Over the last couple of years we have seen a significant growth in demand for our products in the Middle East, with increased investment in infrastructure across the region as a whole. Because of continued growth in the market, we have also invested in the expansion of our Dubai-based office and regional support team to ensure we are perfectly placed to supply and service our customers.” Reporting Multiple Disturbances Future Fibre Technologies will be showcasing its enhanced Aura Ai-2 controller. Featuring unrivalled high-sensitivity detection, location accuracy, cut resilience capability and the industry’s longest linear range - this product features new ultra-low noise optical detection electronics. This ensures a single controller can cover a distance up to 110 kilometres, accurately detecting, locating and reporting multiple disturbances to just +/- two metres. Also on stand S3-C48, BQT Solutions will be demonstrating the new high-strength Orca lock to the middle east market Also on stand S3-C48, BQT Solutions will be demonstrating the new high-strength Orca lock to the middle east market. Building on the success of the award winning YG10, the Orca lock is designed for securing gates, roller doors, shipping containers and any other large door or entryway. Alongside the Orca’s impressive physical attributes, a unique feature is its ability to fully integrate into an access control system, surpassing any other solutions available in the market. Security Risk Management Orca is fully monitored, weatherproof, and user configurable - providing the perfect indoor and outdoor locking solution. As well as the products themselves, the Ava Group team will be on hand to explain how its solutions are being used in real-world projects to address the latest threats. Mark concluded, “We are looking forward to discussing recent key examples of our technology in action, including a major military closed data network where our data network infrastructure protection solution is protecting against tapping and tampering. These projects illustrate the depth of our expertise in security risk management and highlight the level of protection which we achieve to client’s assets and infrastructure. If you are visiting the event come and have a chat with our friendly and expert team on Stand S3-C48 about your specific security needs.”

Ava Group To Showcase Technology Portfolio Of Security Solutions At International Security Expo 2018
Ava Group To Showcase Technology Portfolio Of Security Solutions At International Security Expo 2018

Ava Group (AVA), global provider of security risk management services and technology will be presenting its portfolio of security solutions at International Security Expo, stand E74. The expo also hosts a range of certified conferences and workshops covering every major sector of the security industry. Taking place over two days at London Olympia, the event focuses on the needs of government and CNI amongst other key sectors. Fiber Optic Intrusion Detection Ava Group will be showcasing the latest solutions from its technology division - incorporating Future Fibre Technologies and BQT Solutions. The Ava Group is a market leader of risk management services and technologies, offering a portfolio of complementary solutions encompassing both fiber optic intrusion detection and high security access control and locking. Mark Horton, Global Sales & Marketing Director – Future Fibre Technologies commented, “Our brands have a strong pedigree in some of the expo’s key sectors including government and CNI, and we’re very much looking forward to discussing with visitors how Ava’s solutions can be applied to protect their organizations. Ava Group has had some major project wins in recent months including a major military closed data network, who have selected our data network infrastructure protection solution to secure its network against tapping and tampering. It is projects such as this that demonstrate Ava Group’s expertise in security risk management and protection of client’s assets and infrastructure.” Perimeter Security Technology New ultra-low noise optical detection electronics ensure a single controller can cover a distance up to 110 kilometres Ava Group’s CTO – Technology, Dr Jim Katsifolis will be presenting in the Perimeter Security & Intrusion Detection Technology Workshop on ‘Security within security in a converged perimeter intrusion detection solution’ on the first morning of the exhibition. An accomplished R&D professional, Jim will explore the latest generation of PIDS technologies, the convergence of intrusion detection and cybersecurity as well as addressing some common myths in this field. Featured on the stand will be the enhanced Aura Ai-2 controller from Future Fibre Technologies. This market-leading product offers unrivalled high-sensitivity detection, location accuracy, cut resilience capability and the industry’s longest linear range. New ultra-low noise optical detection electronics ensure a single controller can cover a distance up to 110 kilometres and can accurately detect, locate and report multiple disturbances to +/- 2 metres. Security Management Solution Ava Group is also previewing its Small Site Assurance range, which is designed to protect remote unmanned locations through a holistic security management solution. The solution incorporates intrusion detection, access control and locking as well as environmental monitoring - all controlled remotely from a simple graphical user interface. The Small Site Assurance range is particularly suited for utilities, telecoms, energy, oil & gas and data centers that are at risk from threats such as vandalism, opportunistic and targeted theft, terrorist attack, trespass, system failure, accident or injury. Orca Locking Security Solution The Orca lock is a high-strength lock designed for securing gates, roller doors, shipping containers, and any other large door or entryway From BQT Solutions, Ava Group will be demonstrating the Orca lock. Building on the success of the award winning YG10, the Orca lock is a high-strength lock designed for securing gates, roller doors, shipping containers, and any other large door or entryway. Alongside the Orca’s impressive physical attributes, its ability to integrate into an access control system is what elevates it beyond anything available in the market. Fully monitored, weatherproof, and user configurable, the Orca is the perfect indoor and outdoor locking solution. BQT will also demonstrate the latest software integration between its miPASS Access TMS software and Paxton’s Net2 access control software. The integration enables the seamless addition of BQT biometric readers to new or existing Net2 systems, facilitating a smooth transition from less secure card technologies to more robust options like fingerprint biometrics and BQT’s own miPASS credentials.

Related white papers

Physical Access Control In Higher Education

A Brief History of Access Control Credentials

RFID and Smartphone Readers in Physical Access Control