Keyscan Access Control Cards, Tags & Fobs

The experience of the COVID-19 pandemic has made us all more conscious of who is coming and going from our property. Whether it is a family home, business premises or public building, property owners want full control over access for protection and peace of mind. As a provider of access control technologies, we are seeing a growing demand for automated gates with a variety of access control systems. There are a number of considerations that buyers need to make when investing. And as an installer, there is advice that you can offer to help your clients make the right choice for their property. Here are some of the key considerations you’ll need to make and discuss with your client. Whomever you buy from, you should be offered more than a simple instruction manual. Electronic locks, magnetic locks and code security In the first instance, you’ll need to advise on the type of lock and access control available. Electronic locks release on the operation of the automation system to allow the gates to open. Locks are required for all non-locking (also known as reversible) operators and are recommended for any gate on a multi-user site or any gate over 2.5m. Apply the same logic to an automated gate as you would to a domestic door – for example, you wouldn’t fit your front door with a lock on the same side as the hinges or a drop bolt at the hinge end of a manual gate so why dispense with this logic when the gate is automated? Electronic locks release on the operation of the automation system to allow the gates to open There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks. These are all designed for external use. While the gate itself will provide physical security, the customer will want to feel in control of who enters their property, when and for what purpose. Consider access for mail and deliveries, waste disposal and visitors arriving on foot etc. There is a range of options available. Intercom systems will allow the user to vet visitors, keypad entry can allow remote access for visitors with a specific code, remote controls allow an oncoming driver to open the gates without getting out of the vehicle, and a timer control can be used to open or close the gates at certain times of the day. Vehicle detection loops can be installed discreetly under the tarmac allowing the presence of vehicles to exit the gates and prevent closing while obstructed. Sliding gates versus swinging gates There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks Gates can be automated to either swing or to slide open and in the case of swinging gates, the opener may be concealed underground or gate mounted. The most suitable opener for your installation will depend on the space available and the type of gate selected. Concealed underground automation is ideal for highly ornate gates. However, where gates are fully infilled (typical of many timber designs), gate mounted openers are concealed from the front of the gate by the gate leaf and present a cost-effective option. The choice between slide and swing is largely down to space - swing gates require a clear space for their opening arc while sliding gates require space to one or both sides of the gate. Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited, as they use the least space when opening. Voltage Most swing gate and sliding systems are available in 24v or 230v. The 24v systems still need 230v mains power – there is a transformer built into the 24v control panels. Deciding which voltage to use can include a combination of factors such as the material of the gates, the location of the system and the safety features you want. Concealed underground automation is ideal for highly ornate gates With wrought iron gates, the wind can pass through them whereas with fully boarded wooden gates (popular because they give full privacy) the wind has nowhere to go, so they act like sails. For commercial or industrial applications with larger entrances and a heavy gate, you may need 3 Phase 400v power (sliding gates only). Installing gate motors in confined spaces The environment in which you are fitting may well influence which gate and motor you recommend. Will it be in an exposed area which is subject to the elements? Will it be positioned on a slope? Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited Installers have always faced the challenge of installing gate motors in confined spaces. When fitting a pedestrian gate, there is often limited space in which to work – potentially making an installation time consuming and technically demanding. If this is the case for you, consider a gate operator which is designed specifically for installations with limited space for maneuver. An example of this is the E5 compact gate operator. The operator is not only small but has an optional slide lever attachment designed for installations where there is extremely limited space, meaning that just 8cm of the pillar is needed for installation. What’s more, improved fixing points and a simple ‘hook and fasten’ process means assembly is safe, quick and straight forward. Ultimately, you’ll be looking for a good quality, reliable product with good service. Work with a supplier that offers more than just a manual. If they are happy to offer training, their time and advice when you buy, the chances are you’ll get their support long term.

The unprecedented global impact of COVID-19 has taken its toll on all of us, but as cases of the virus thankfully recede, employers are now forced to confront how they can enable a safe return to work for employees. For many employers, this means they will have to carry out a COVID-19 risk assessment, redesign workspaces to maintain social distances, carry out more frequent cleaning, manage the transmission risk and find alternatives to touch-based security devices. Protecting workplace occupants in any emergency requires preparation and clear communication. This is especially critical in a health crisis involving an infectious disease. These are some of the essential best practices that could help organizations reduce the impact on their employees and operations during this pandemic. 1. Use a visitor management system With a visitor management system, organizations have a single source of real-time and historical insights into who is, or was recently, in the workplace. This is especially important because of the need to perform contact tracing should anyone in the organization show symptoms of COVID-19, meaning everyone they have been in contact with needs to be contacted and asked to isolate. Yet still, first impressions are made at the front desk or lobby, where the visitor experience needs to be a positive one. At the same time, though, any emergency event requires that there be strict control over who is entering the workplace. This policy also needs to be clearly communicated to visitors. Doing this minimizes risk to visitors as well as the workforce. In addition to delivering a high-quality visitor experience, the ideal visitor management system must: Enable organizations to meet regulatory compliance mandates and facilitate check-in at a self-service kiosk to minimize wait times. Customize the visitor experience to support specific security needs, such as accelerating and simplifying check-in or requiring additional security pre-checks. Automate compliance as it relates to visitor access rules with historical visit reports. 2. Pre-check questions at visitor registration kiosks Organizations can strengthen security at the registration kiosk using a flexible, enterprise-grade visitor management system to add visitor sign-in steps. This has proven successful in the past when used to control the spread of infectious disease during an outbreak. An example of this is a U.S. children's hospital which managed to reduce facility infection rates by 25 percent over a two-year period using a commercial, off-the-shelf physical identity and access management (PIAM) solution from HID Global. The solution provides two particularly important capabilities that can be used by organizations to protect their workplace from the uncontrolled spread of an infectious disease: Enhance visitor registration policy with additional mandatory questions to help identify any visitors who may need other screenings. Extend the visitor registration kiosk with a mandatory pop-up asking further questions during visitor check-in. 3. Understand who has visited your workplace Successful controlling the spread of infection throughout a facility requires the ability to automatically maintain an auditable trail of activity. This can be done using an enterprise-grade visitor management system that makes it easy to retrieve historical visit reports. This provides a timeline of who was in the workplace, and when they were there. Key features include: A single dashboard providing useful visitor insights at your fingertips. Historical reports that provide visitor details including location and contact information, all in compliance with General Data Protection Regulation (GDPR) and other privacy regulations. 4. Clearly communicate how infection risks can be reduced Global organizations must actively communicate with visitors and employees on the outbreak of infectious diseases and follow best practices outlined by the World Health Organization (WHO). Here are several things organizations can do in this area to help maintain a safe and healthy workplace: Re-enforce and communicate WHO best practices with guideline posters in the front lobby and throughout the workplace. Add posters that also encourage regular and thorough washing of hands. Encourage everyone to cough or sneese into their shirt sleeve in their flexed elbow or cover their mouth and nose with a tissue. Encourage everyone to keep a relatively safe distance from each other and use alternatives to handshakes when saying hello. Organizations must contend with a variety of workplace challenges during the outbreak of an infectious disease. These challenges can be solved with best practices that include a comprehensive visitor management system that automates critical check-in policies and maintains an auditable trail of visitor activity.  

The emergence of smartphones using iOS and Android is rapidly changing the landscape of the IT industry around the world. Several industries, such as digital cameras, car navigation, MP3, and PNP, have been replaced by equivalent or even better performance using smartphones. Smartphones provide increasing portability by integrating the functions of various devices into a single unit which allows them to connect to platforms with network-based services and offer new services and conveniences that have never been experienced before. These changes have expanded into the access control market. Although not yet widespread, ‘Mobile access cards’ is one of the terminologies that everyone has been talking about. RF cards used for access security are being integrated into smartphones just as digital cameras and MP3s were in the past. While people might forget their access cards at home in the morning, they seldom forget their smartphones. Using smartphones for access control increases entry access reliability and convenience. Mobile/smartphone access control A key aspect of mobile credential is that it makes it possible to issue or reclaim cards without face-to-face interaction As in other markets, the combination of smartphones and access cards is creating a new value that goes beyond the simple convenience of integration enhancing the ability to prevent unauthorized authentication and entrance. People sometimes lend their access cards to others, but it is far less likely they might lend their smartphone with all their financial information and personal information – to another person. This overcomes an important fundamental weakness of RF cards. Another valuable aspect of mobile credential is that it makes it possible to issue or reclaim cards without face-to-face interaction. Under existing access security systems, cards must be issued in person. Since card issuance implies access rights, the recipient’s identification must be confirmed first before enabling the card and once the card has been issued, it cannot be retracted without another separate face-to-face interaction. Mobile access cards In contrast, mobile access cards are designed to transfer authority safely to the user's smartphone based on TLS. In this way, credentials can be safely managed with authenticated users without face-to-face interaction. Mobile cards can be used not only at the sites with a large number of visitors or when managing access for an unspecified number of visitors, but also at the places like shared offices, kitchens and gyms, currently used as smart access control systems in shared economy markets. The market share of mobile access cards today is low even though the capability can offer real benefits to users and markets. While the access control market itself is slow-moving, there are also practical problems that limit the adoption of new technologies like mobile access cards. Use of Bluetooth Low Energy technology While NFC could be an important technology for mobile credential that is available today on virtually all smartphones, differences in implementation and data handling processes from various vendors prevents universal deployment of a single solution to all devices currently on the market. Accordingly, Bluetooth Low Energy (BLE) has been considered as an alternative to NFC. Bluetooth is a technology that has been applied to smartphones for a long time, and its usage and interface are unified, so there are no compatibility problems. However, speed becomes the main problem. The authentication speed of BLE mobile access card products provided by major companies is slower than that of existing cards. Enhancing credential authentication speed Authentication speed is being continuously improved using BLE's GAP layer and GATT layers The second problem is that mobile access cards must be accompanied by a supply of compatible card readers. In order to use mobile access cards, readers need to be updated but this is not a simple task in the access control market. For 13.56 MHz smart cards (which were designed to replace 125 kHz cards), it has taken 20 years since the standard was established but only about half of all 25 kHz cards have been replaced so far. Legacy compatibility and the need for equivalent performance, even with additional benefits, will drive adoption timing for the Access Control market. While BLE technology helps resolve the compatibility problem of mobile access cards, it can identify some breakthroughs that can solve the speed problem. Authentication speed is being continuously improved using BLE's GAP layer and GATT layers, and new products with these improvements are now released in the market. Making use of key improvements allows Suprema's mobile access card to exhibit an authentication speed of less than 0.5 seconds providing equivalent performance to that of card-based authentication. AirFob Patch MOCA System's AirFob Patch addresses the need for technological improvements in the access control market in a direct, cost effective, and reliable way – by offering the ability to add high-performance BLE to existing card readers – enabling them to read BLE smartphone data by applying a small adhesive patch approximately the size of a coin. This innovative breakthrough applies energy harvesting technology, generating energy from the RF field emitted by the existing RF reader – then converting the data received via BLE back into RF – and delivering it to the reader. By adding the ability to use BLE on virtually any existing RF card reading device, MOCA allows greater ability for partners and end users to deploy a technologically-stable, high performance access control mobile credential solution to their employees, using devices they already own and are familiar with. Adding MOCA AirFob Patch eliminates the need to buy and install updated readers simply to take advantage of mobile credential, lowering costs and risks, and increasing employee confidence and convenience. Growth forecast of mobile access card market in 2020 In 2020, forecasts show that the mobile access card market will grow far more rapidly Several companies have entered the mobile access card market, but they have not set up a meaningful product solution stream until 2019. In 2020, forecasts show that the mobile access card market will grow far more rapidly. Reviewing new entries into the market allows identification of the latest products that provide improving solutions to compatibility and speed problems. MOCA AirFob Patch addresses development plans in process today that overcome the legacy installed base of card readers – allowing rapid creation of an environment that can make immediate use of BLE mobile access cards. Integrated mobile digital ID With proven usability and within suitable environments, mobile access cards will also begin to make inroads into other markets, not just the access control market. In the sharing economy market, which seeks access management without face-to-face interaction, the integrated mobile digital ID led by the 'DID Alliance' will serve as a technical tool that can be used in access authentication – forging increasing links between the access control and digital ID markets.

Altronix, a manufacturer of power and data transmission products for the professional security industry, is showcasing a host of new Trove Access and Power Integration Solutions here at ISC West 2018 (booth #11073). Trove easily combines Altronix power with access controllers from the industry’s leading manufacturers. DMP, ProdataKey (PDK), Sielox, and ZKTeco USA now join Altronix’s extensive list of access control manufacturers to capitalize on the benefits that Trove solutions deliver. “Trove is engineered to help system designers easily layout power supplies, access controllers and accessories in an organized streamlined manner, which saves time, reduces costs and conserves valuable space,” said Alan Forman, President, Altronix Corporation. “We are pleased to collaborate with the industry’s leading access manufacturers, increasing ROI and providing value-added features for our mutual customers.”Removable backplanes designed for specific access control brands allow installers to easily configure and test system configurations Simplifying Security Deployments Trove Access and Power Integration Solutions simplify board layout and wire management, while providing extreme flexibility and scalability when designing and deploying access systems. Removable backplanes designed for specific access control brands allow installers to easily configure and test system configurations prior to on-site installation, reducing time and labour and increasing profitability. In addition to the Trove1 and Trove2 Series, Altronix introduced Trove3 for the largest access control deployments. Altronix Trove now supports over 40 brands, including: AMAG, Bosch, CDVI, DMP, Genetec, HID, Honeywell, Kantech, Keyscan, Lenel, Mercury, ProdataKey (PDK), Sielox, Software House and ZKTeco USA with more to come. Trove enclosures include a cam lock, tamper switch, mounting hardware, and provide ample room to accommodate back-up batteries. Altronix also offers a free Trove System Design Tool to further simplify the product selection and design process.

Altronix, a recognized provider of power and transmission solutions for the professional security industry, is featuring its expanded offering of Trove Access and Power Integration Solutions at ASIS 2017 (booth # 2823). New additions to the Trove series include Altronix integrations with Bosch, DMP, Honeywell, Kantech and Sielox access. These new models join the versatile line of Trove solutions which accommodate AMAG, CDVI, HID/Vertx, KABA/KeyScan, Mercury and Software House access controllers. “Trove enclosures and backplanes simplify board layout and wire management, greatly reducing installation and labor costs, while providing the versatility and scalability that system designers and installers require to easily configure their systems.” said Alan Forman, President, Altronix Corporation. Enhanced Performance Efficiency Trove2 Access and Power Integration Solutions are designed for larger applications, allowing Altronix power/accessories combined with access controllers from the industry’s leading manfacturers to be wired and pre-tested prior to on-site installation. This reduces total cost and enhances performance efficiency. Altronix also offers the Trove1 Access and Power Integration Solution, a more compact version of the Trove2 for smaller applications which accommodate CDVI, HID/VertX and Mercury access controllers. All Trove enclosures include a cam lock, tamper switch and mounting hardware. Altronix has further simplified the product selection and configuration process by offering a free online Trove System Design Tool for configuring a access system.

The new FaceStation 2 is a contactless facial recognition device with an adjustable wall bracket  BioConnect and Suprema will be at ISC West 2017 demonstrating the newest innovations in biometrics, security and identity in booth no. 22075. New facial recognition, dual-factor cabinet lock, cybersecurity and mobile solutions will be demonstrated in the joint booth.  With cybersecurity issues seemingly ever-more prevalent and the development of more user-friendly security solutions such as mobile and contactless biometric, security professionals are consistently seeking ways to protect both physical and logical applications. BioConnect and Suprema are pleased to address these issues with a focus on biometrics, security and identity at ISC West 2017 and invite security professionals to learn more. Suprema FaceStation 2 Suprema will debut the new FaceStation 2, a facial recognition device with multi-card support. The FaceStation 2 is the next generation of the FaceStation and as a contactless facial recognition device with an adjustable wall bracket to accommodate different heights, it is very user friendly. It boasts an incredibly fast and accurate matching speed (1:3,000 matches in one second) and captures both static and dynamic templates, giving it the ability to constantly evolve and sustain a more exact understanding of the daily changing expressions of the face. The device also offers multi-factor authentication options with a RF card (HID Seos, iClass, Prox) and PIN. It also can operate in much harsher lighting conditions than other competing facial recognition devices with an operating illuminance of up to 25,000 lux.  BioConnect ID CabinetShield BioConnect ID is at the core of every biometric service offered by BioConnect and simplifiesthe deployment of biometrics BioConnect colocation customers expressed the need to provide dual-factor authentication from the front door all the way to the cabinet to address both compliance and their customer security requirements. In the past, solutions to meet these requirements at the server cabinet were limited. To address this problem, BioConnect created BioConnect ID CabinetShield a dual-factor fingerprint plus card lock to secure server cabinets. With biometric (fingerprint) and card support, the lock is manufactured to fit most of the common cabinets and can be easily integrated with over 25 various access control solutions, making installation and enrolment much more simple and sustainable. The BioConnect team has completed multiple successful pilots of the solution in flagship data centers across North America. BioConnect ID Mobile xWith companies going global in footprint and supporting a workforce that is more mobile than ever, BioConnect’s partners are fast-developing solutions where mobile credentials are replacing plastic cards. BioConnect ID is at the core of every biometric service offered by BioConnect and simplifies the deployment of biometrics. BioConnect will debut BioConnect ID in the form of an API/SDK and mobile app to enable enterprises to take advantage of biometrics (face, voice, fingerprint, eyeprint) within their mobile app. BioConnect will be demonstrating partner mobile apps that are secured by BioConnect ID.  Suprema and BioConnect are consistently updating theirbiometric offerings to support evolving industry standards BioConnect ID Cybershield BioConnect and Suprema are very excited to debut BioConnect ID Cybershield, a complete end-to-end physical security solution that meets IT requirements. BioConnect ID Cybershield incorporates Suprema BioStation 2 fingerprint plus card access device integrated with leading access control solutions. It boasts software customisations that meet the requirements of network security, from how the device communicates to the panel, to the network, how the data is stored and can even support an enterprise transitioning to newer network protocols such as 802.1x and IPv6. The solution will be demonstrated with Software House CCURE 9000 access control.  BioConnect ID Enterprise BioConnect is consistently integrating the leading biometric solutions on the market to offer flexibility to grow in the future. BioConnect and Suprema will demonstrate how Suprema devices and BioConnect ID CabinetShield seamlessly integrate with Lenel OnGuard, Brivo OnAir, AMAG Symmetry, Genetec Security Center and Keyscan Aurora access control solutions with BioConnect ID Enterprise.  Suprema and BioConnect are also consistently updating their biometric offerings to support evolving industry standards such as communication protocols (such as OSDP) and card types such as HID iClass and SEOS. BioConnect and Suprema are looking forward to meeting with security professionals at ISC West. Attendees can request a meeting on BioConnect’s website or visit booth no. 22075 to see the latest biometric solutions on the market.