Veracity VHW-HWPO HIGHWIRE POE Ethernet Over Coax Device With POE OUT For Camera

Technical Specification

Features:
  • Make: Veracity
  • Model code: VHW-HWPO
  • Telemetry Type: Coax
  • Bandwidth MHz: 200Mbps
  • Voltage: 8 ~ 57 V DC, 20 ~ 28 V AC
Additional info:

Veracity VHW-HWPO is a HIGHWIRE POE Ethernet over coax device with POE OUT for camera that turns any analog video cable into a high-speed network connection, enabling the replacement of analog cameras with IP cameras without installing any new cabling. By simply connecting a pair of HIGHWIRE POE units to each end of the coaxial cable, the link will be established automatically with no configuration required. HIGHWIRE can provide a full-duplex 100BASE-T network connection, with no bandwidth restrictions, over 500 metres of RG-11 cable, or over 280 metres of CCTV-grade RG-59 cable. The HIGHWIRE connection is invisible to Ethernet data and requires no MAC or IP address; to the camera the link looks like any other network cable. Its compact dimensions even allow it to be mounted inside a camera housing or Veracity’s optional wall-mounting brackets and a rack-mounting kits are available if required. HIGHWIRE can be powered by legacy 12 Volt DC or 24 Volt AC supplies. Connection is via a detachable screw terminal and the type and polarity of the supply are detected automatically.

Read more
Make Veracity
Manufacturer Veracity
Model code VHW-HWPO
Telemetry Type Coax
Bandwidth MHz 200Mbps
Electrical Specifications Voltage: 8 ~ 57 V DC, 20 ~ 28 V AC
Environmental Specifications Operating Temp oC: -10 ~ +50 C (14 ~ +122 F)
Operating Humidity %: 85
Physical Specifications Dimensions mm: 104 x 54 x 24
Weight g: 110
Additional info

Veracity VHW-HWPO is a HIGHWIRE POE Ethernet over coax device with POE OUT for camera that turns any analog video cable into a high-speed network connection, enabling the replacement of analog cameras with IP cameras without installing any new cabling. By simply connecting a pair of HIGHWIRE POE units to each end of the coaxial cable, the link will be established automatically with no configuration required. HIGHWIRE can provide a full-duplex 100BASE-T network connection, with no bandwidth restrictions, over 500 metres of RG-11 cable, or over 280 metres of CCTV-grade RG-59 cable.

The HIGHWIRE connection is invisible to Ethernet data and requires no MAC or IP address; to the camera the link looks like any other network cable. Its compact dimensions even allow it to be mounted inside a camera housing or Veracity’s optional wall-mounting brackets and a rack-mounting kits are available if required. HIGHWIRE can be powered by legacy 12 Volt DC or 24 Volt AC supplies. Connection is via a detachable screw terminal and the type and polarity of the supply are detected automatically.

Download PDF version