ComNet Security camera systems

The CLSETUP provides a simple way to setup and focus PoE-powered IP cameras, and is an ideal diagnostic tool for installers working with both CCTV and IT PoE-based systems.

ComNet SFP-ZX³ Copper And Optical Fiber Transceivers

The ComNet selection of MSA Compliant Small Form-Factor Pluggable (SFP) modules allows for an optical or electrical interface when using a ComNet managed switch, unmanaged switch or media converter. These interchangeable SFP modules are available for use with copper media, multimode optical fiber, or single mode optical fiber. The optical fiber SFP modules are available in Fast Ethernet one and two fiber versions and Gigabit Ethernet one and two fiber versions.

ComNet SFP-BXU³ Copper And Optical Fiber Transceivers

ComNet SFP-26A Copper And Optical Fiber Transceivers

ComNet SFP-22A Copper And Optical Fiber Transceivers

ComNet SFP-20A Copper And Optical Fiber Transceivers

ComNet SFP-18A Copper And Optical Fiber Transceivers

ComNet SFP-16 Copper And Optical Fiber Transceivers

ComNet SFP-9 Copper And Optical Fiber Transceivers

ComNet SFP-5 Copper And Optical Fiber Transceivers

ComNet SFP-1 Copper And Optical Fiber Transceivers

ComNet SFP-LX³ Copper And Optical Fiber Transceivers

ComNet SFP-SX³ Copper And Optical Fiber Transceivers

ComNet SFP-36A Copper And Optical Fiber Transceivers

ComNet SFP-24A Copper And Optical Fiber Transceivers

ComNet SFP-7 Copper And Optical Fiber Transceivers

ComNet SFP-3 Copper And Optical Fiber Transceivers

ComNet SFP-12A Copper And Optical Fiber Transceivers

ComNet SFP-10A Copper And Optical Fiber Transceivers

ComNet FDX72(M,S)1 Drop-insert-repeat Data Transceiver

ComNet FDX72(M,S)1 drop-insert-repeat data transceiver is a fully-digital modem designed for implementing rs232, rs422 or rs485 2 or 4-wire data communications networks of the highest possible reliability.The transceiver features data translation to convert between data protocols. Data re-clocking and regeneration permit an almost unlimited number of transceiver/controller units to be used within the network. The transceiver is ideal for use in unconditioned out-of-plant or roadside installations and, unlike many competing designs, only one optical fiber is required between units.

ComNet CWFE1POCOAXBM Ethernet-over-coax/PoE

ComNet CWFE1POCOAXBM supports 100Mbps Ethernet transmission as well as Power over Ethernet (PoE) over standard 75 ohm coaxial cable circuits, at data rates of up to 100 Mbps, and transmission distances of up to 230 meters. CWFE1POCOAXBM is installed at the powered device (PD) in the field location. LED indicators are provided for rapidly ascertaining the operating status of the device.

ComNet CWFE1COAXM Single Channel Ethernet Over Coax

ComNet CWFE1COAXM single channel ethernet over coax supports high-speed Ethernet transmission over standard 75 ohm coaxial cable circuits, at data rates of 100 Mbps, and transmission distances of up to 305 meters. It is a small sized unit.

ComNet CL-SFP Ethernet Extender Module

ComNet CL-SFP s a small form-factor pluggable Ethernet extender module that improves bandwidth and distance of existing copper networks. It helps avoid installation costs of new fiber lines on site by allowing full 100Mbps Ethernet bandwidth to be extended over 2-wire twisted pair or coaxial cable.

ComNet CWFE8MS/DIN Managed Ethernet Switch

The ComWorx™ CWFE8MS/DIN Managed Ethernet Switch provides transmission of 10/100 BASE-T Ethernet data. These units are available for use with conventional CAT-5e copper transmission media. Up to 8 electrical ports for easily implementing point-to-point, linear adddrop, drop-and-repeat, star or true self-healing ring and mesh network system architectures.

ComNet CWGE26FX2TX24MSPOE Commercial Grade Managed Ethernet Switch

The ComNet™ CWGE26FX2TX24MSPOE is an extended temperature commercial grade Managed Ethernet Switch. It provides IEEE 802.3at PoE to twenty-four10/100/1000BASE-T(X) two of which are also gigabit combo ports supporting 100/1000Fx SFP Modules. A further two-100/1000FX SFP* ports are also included.

ComNet CKFE1COAX Ethernet-Over-Coax Extender

ComNet CKFE1COAX ethernet-over-coax extender consists of a pair of CLFE1COAX which support one channel of 100Mbps Ethernet as well as Pass-through Power over Ethernet (PoE) over standard 75Ω coaxial cable. The unit supports transmission distances of up to 5,000 feet (1524m) at 10 Mbps, or 1800 feet (548m) at 100 Mbps.

ComNet CWFE8TX8MS Commercial Grade 8 Port Managed Ethernet Switch

The ComWorx CWFE8TX8MS Managed Ethernet Switch provides transmission of 100 BASE-TX Ethernet data. These units are available for use with conventional CAT-5e copper transmission media. Up to 8 electrical ports are available for easily implementing point-to-point, linear add-drop, drop-and-repeat, star or true selfhealing ring and mesh network system architectures. The electrical ports support the 10/100 Mbps (100 BASE-TX) Ethernet IEEE 802.3 protocol, and auto-negotiating and auto-MDI/MDIX features are provided for simplicity and ease of installation.

ComNet CWFE2COAX Dual Channel Ethernet Over Coax

ComNet CWFE2COAX dual channel ethernet over coax supports high-speed Ethernet transmission over standard 75 ohm coaxial cable circuits, at data rates of 100 Mbps, and transmission distances of up to 305 meters. It contains two independent channels in a single standard-sized enclosure.