Bosch Security devices

A full range of MIC Series power supply units (PSUs), with integrated Bosch IP technology provides all connections for power, telemetry and video for MIC Series MIC550, MIC550IR, and MIC612 cameras. The MIC IP PSU uses Dual Streaming to generate two independent IP video streams per channel if sufficient computational power is available. The MIC IP PSU features a highly flexible recording scheduler, providing up to ten programmable recording profiles and allowing individually assigned camera profiles.

Bosch UPA-1220-50 power supply unit is designed specifically for the continual use demands of professional surveillance products. While the unit is used primarily with security cameras, its small size and high energy efficiency rating also make it ideal for powering a wide range of other low power security products, including many Allegiant® system accessories and control devices.

Bosch UML-202-PS is a universal power supply unit for UML LCD monitors.

Bosch DS7432E remote module addresses up to eight input loops of conventional contacts to the multiplex bus of the control panel. The module has an additional serial dual end-of-line (EOL) wiring configuration.

Bosch VDI-245V03-2 integrated day/night dome camera is a vandal-resistant, user-friendly surface mount camera designed for effective 24/7 surveillance. Equipped with a 540 TVL mechanical filter CCD and 18 high-efficiency infrared LEDs, the camera delivers vivid daytime color and 18 m (60 ft) of active-infrared night vision.

Bosch DS7432 remote module addresses up to eight input loops of conventional contacts to the multiplex bus of the control panel. The module has an additional serial dual end-of-line (EOL) wiring configuration.

Bosch RF835E is a wireless PIR/microwave intruder detector. It uses artificial intelligence to detect motion and provide immunity to false alarms caused by pets or animals. An integral RF transmitter reports low battery and tamper status, and sends a supervisory signal to the control panel.

Bosch DINION IP starlight 8000 MP 720 provides clear images 24/7 – even at night or under low-light conditions. It provides high sensitivity in color (0.017 lx) and monochrome mode (0.0057 lx) enabling the camera to work with a minimum of ambient light. This exceptional light sensitivity combined with Content-Based Imaging Technology (C-BIT) ensures crisp, clear, detailed images in all lighting conditions.

Bosch CNFE2MC/IN is a media converter device designed to transmit and receive 10/100 Mbps Ethernet data over optical fiber using SFP modules. This head-end device is supplied in an enclosure that can be surface mounted or rack mounted using the optional C1-IN rack mount card cage. The unit does not require infield adjustments, and provides automatic MDI/MDI-X crossover.

Bosch DS7432-CHI remote module addresses up to eight input loops of conventional contacts to the multiplex bus of the control panel. The module has an additional serial dual end-of-line (EOL) wiring configuration.

Bosch MIC-24PSU-2 is a 24 VAC power supply unit with two video outputs for MIC Series cameras. It ensures that MIC cameras can be installed in a variety of locations, including low voltage and mobile applications. The power supply has UL, CE, and FCC approval, is rated to IP65 as well as supports 50/60 Hz.

Bosch VDA-WMT-AODOME wall dome mount is specifically designed for outdoor dome cameras.

Ethernet media converter video transmitter/data receiver fiber optic kit for AUTODOME cameras, for MIC-IP-PSU for MIC analog cameras and for the Surveillance cabinets Designed to transmit 10/100 Mbps Ethernet signals over fiber optic cable using Small Form-factor Pluggable (SFP) modules This fiber optic media converter device can be used to transmit Ethernet data well beyond the 100 m limit of copper-based media and provides a secure, EMI/RFI free transmission path The media convertermodule along with the SFP module is user-installed directly into the AUTODOME's power supply box to provide an  integrated fiber optic solution

Bosch VDI-240V03-2 is a outdoor dome camera that comes in robust, conduit compatible, all-weather housings (IP66 rated). It provides high-resolution images (570TVL Sensor Resolution). It switches to monochrome mode with a higher light sensitivity when there is insufficient lighting. It has a infrared version of 20 on-board IR LEDs providing 20 meters of night vision where extra light is required.

A single-mode fiber (MMF) optic module with duplex LC connector Provides fast Ethernet optical interface for the VG4-SFPSCKT and the CNFE2MC/IN media converter Pluggable design Transmits longer than 20 km (12.4 miles) at 10/100 Mbps Wavelength (transmit/receive) - 1310nm/1310nm

A multi-mode fiber (MMF) optic module with single SC connector Provides fast Ethernet optical interface for the VG4-SFPSCKT and the CNFE2MC/IN media converter Pluggable design Transmits longer than 2 km (1.2 miles) at 10/100 Mbps Wavelength (transmit/receive) - 1310nm/1550nm

A multi-mode fiber (MMF) optic module with duplex LC connector Provides fast Ethernet optical interface for the VG4-SFPSCKT and the CNFE2MC/IN media converter Pluggable design Transmits longer than 2 km (1.2 miles) at 10/100 Mbps Wavelength (transmit/receive) - 1310nm/1310nm

Bosch DNR-753-16B000 real time 700 series hybrid/network HD recorder is equipped with four front-replaceable hard drives and extensive integration features. The 700 Series is ideal for medium to large-scale systems. It is available in both IP-only and hybrid models, the 700 Series can handle even the challenging CCTV applications without excessive demands on installers or operators. It is ideal for shopping centers and retail applications, banks and financial institutions, city centers and public monitoring applications, crowd surveillance, and casinos and hotel complexes.

Bosch EXPB-3-W-KIT is a wall-mount kit includinh camera housing for IR illuminators. It is designed for rugged outdoor applications. The thick cast aluminum construction is extremely durable and tough. It is compatible with AEGIS UFLED and AEGIS SuperLED Illuminators.

Bosch MIC440SUNSHIELD is a sunshield for the MIC440 camera. It is a two-part molding designed to provide additional protection against direct solar radiation by reflecting solar exposure, and creating an insulating gap between the environment and the surface of the camera.

Bosch MICTHERSUNSHLD is a sunshield kit for MIC Thermal cameras. It is a two-part molding, designed to provide additional protection against direct solar radiation, particularly in sunny climates.

Bosch MIC-SCA-S is a plain finish, stainless steel shallow conduit adapter for 4-inch PCD base. It is used as required with other mounting brackets. It has a single 25 mm side entry conduit fitting hole.

Bosch ISN-GMA-S6 is a fixing device used with seismic detectors to monitor safes and strong rooms. It consists of a detector plate, a door plate, and a standby plate.

Bosch ISN-GMX-P0 is a mounting plate for seismic detectors. It is suitable for mounting seismic detectors to steel or concrete surfaces. The mounting plate is screwed or welded directly onto the surface.

Bosch ISN-GMX-P3S is a swivel plate for use with ISN-SM-50 seismic detectors. It monitors safes and strong rooms with exposed keyholes.

Bosch ISN-GMXW-G0 is a watertight housing that protects seismic detectors from water and dust.

Bosch ISN-GMX-P3S2 spacer for sesmic detector with 2 mm thickness.

Bosch ISN-GMX-P3S4 spacer for sesmic detector with 4 mm thickness.