UL-514-A listed electrical box included at the base Access panel at the rear base of the tower EMERGENCY signage Beacon/Strobe is always lit; flashes during emergency call-in (Requires 24V DC) Weather and vandal resistant LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meets ADA regulations

EMERGENCY lettering Strobe is always lit; flashes during emergency call-in (requires 24V DC) Camera arm with universal pipe threading Weather and vandal resistant Lightweight LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meet ADA regulations UL-514-A listed electrical box included at the base Access panels at the base and middle of the tower

Aiphone GF-2F is a vandal resistant 2-module front frame for GT Series Modular Entrance Stations.

Aiphone GF-2B is a flush mount 2-module back box.

Aiphone GT-303HB is a vandal resistant 3x3-module surface mount box for GT Series entrance panel.

Aiphone GT-203HB is a vandal resistant 2x3-module surface mount box for GT Series entrance panel.

Aiphone GF-3B is a flush mount 3-module back box.

Aiphone GT-OP2 is a 2-module postal lock with frame.

Aiphone GT-OP3 is a 3-module postal lock with frame.

Aiphone GT-BCXB-N expanded bus control unit distributes power and data to GT Series stations for expanded systems.

Allows multiple buildings to communicate across a single, logical network Allows up to 480 Entrances, 96 Guard Stations, and 5,000 tenants

Long distance adaptor for up to 980’ to door CCTV camera adaptor with audio door station

Provides selective door release capability Compatible with JP, JF, and KB Series Both normally open and normally closed output options

Provides ability to select/call 16 additional door/sub stations Mounts directly to Master Station or other AX-16SW with supplied brackets

Interfaces AX video door station with 3rd party alternate transmission methods for longer distances Transmitter module for fiber connection

Stainless steel surface mount box for card reader door stations Weather resistant Vandal resistant Inside space for cabling Mounts to flat wall surface Opening at bottom for drainage

3 Channel Inputs Wide Frequency Response Very Low Distortion Balanced Microphone Input Phantom Power on MIC Input with Selector Balanced Telephone Paging Input VoIP Telephone Paging Input Tel and Mic Vox Sensitivity Control Independent Input Controls Bass and Treble Controls

Allows an external device to be triggered when the intercom is called External device will be activated momentarily as long as the call button on the door station is activated

Allows two master stations to answer a single door station Combined use with RY-AC/A for external signaling

Works with existing 2-conductor wire Supplies PoE to stations LED status indicators

Flexible design can overhang mullion on either side of the door Wire cutouts allow for installation when there is an external conduit Clearance for Cat-5/6 cables prevents overbending

A 1-gang mounting plate  Used with the JO-DV, JP-DV, and JV-DV door stations

Compatible with most Aiphone surface mount door stations Attachment holes for different standard mounting boxes, including 1- and 2-gang Mild steel front box, stainless steel back plate Conduit knockout at the base

Allows an external device to be triggered when the intercom is called External device will be activated when the door station calls in

Steel construction Mounts to a door mullion of a glass entry Weather resistant for outdoor use Mounts door station at 45° angle Mounts any 1-gang surface mount Aiphone Audio-only or Audio Video Door Station

Reflective EMERGENCY lettering Strobe is always lit; flashes during emergency call-in (requires 24V DC) Weather and vandal resistant Lightweight LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meet ADA regulations UL-514-A listed electrical box included at the base Access panels at the base and middle of the tower

ASSISTANCE lettering Strobe is always lit; flashes during emergency call-in (requires 24V DC) Weather and vandal resistant Lightweight LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meet ADA regulations UL-514-A listed electrical box included at the base Access panels at the base and middle of the tower

ASSISTANCE lettering Strobe is always lit; flashes during emergency call-in (requires 24V DC) Camera arm with universal pipe threading Weather and vandal resistant Lightweight LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meet ADA regulations UL-514-A listed electrical box included at the base Access panels at the base and middle of the tower