VSPT250D: Tecnovideo’s NEW Stainless Steel Dual Pan & Tilt Unit

Product Profile

Tecnovideo is proud to present the new Pan & Tilt model VSPT250D which broadens the range of stainless steel Pan & Tilt units.

The VSPT250D main feature is the dual housing with integrated Junction Box and full protected internal cabling. With the VSPT250D Pan & Tilt unit it is possible to control the position of two cameras simultaneously. A standard camera (day/night) and an IR camera can be used, but this is just a possibility between a wide set offered by Tecnovideo, in fact different camera housings, selected from the Tecnovideo’s range, can be installed on the P&T.

VSPT250D can be provided fully pre-built and FAT’d tested, pre-wired upon client specification with client’s cameras, or as a single OEM unit for local assembly supported by on site training and assistance.

The VSPT250D Pan & Tilt unit is completely constructed in AISI316 stainless steel to be perfectly corrosion resistant in harsh environments (Marine, Offshore, Food and Heavy Industry) and in every location where the standard aluminum-steel units would rapidly deteriorate.

The VSPT250D Pan & Tilt unit can be controlled using Pelco protocol through the integrated Tecnovideo telemetry receiver. The unit can handle up to 25 kg loads. Versions with both electronically adjustable or external mechanically adjustable end stops limits are available. The pre-set positioning of the unit is controlled by high precision potentiometers fitted as standard on pan and tilt axis. An integrated junction box allows the installation of a toroidal transformer or interface boards and thanks to the internal cable passage from the JB to the P&T unit there won’t be any moving cable while the unit rotates.

The standard VSPT250D Pan & Tilt unit is equipped with a 129WW stainless steel camera housing (with sunshield, heater and integrated wash wiper) and a 129SHIR70 stainless steel camera housing (for IR thermal cameras, with sunshield and heater).

A wide set of customisation is available.

For more information, please visit www.tecnovideocctv.com/pan-tilt_units_vspt250d.php.

Read more

Technical Specification

Make Tecnovideo
Manufacturer Tecnovideo
Model code VSPT250D
AC/ DC Type DC
Max Load kg 25
Pan Speed o/ second 0 - 18°/s
Tilt Speed o/ second 0 - 9.5°/sec
Electrical Specifications Power Consumption: 25 W
Environmental Specifications Protection: IP67
Operating Temperature oC: -20~ +55
Physical Specifications Weight kg: 37
Dimensions mm: 576 x 440 x 497
Pan Angle o 350° Max
Housing Material AISI316L stainless steel
Seal Material 'O' Ring
Additional info

P&T unit with dual housing; internal cabling; electronic limits. Standard equipped with 129WW and 129SHIR70 camera housings and RS485 Pelco D telemetry receiver.

Download PDF version Download PDF version