Videotec Security camera systems

Videotec HOT39K2A700 camera housing exploits the PoE and Hi-PoE technology in an optimal  way, using the power provided by the Ethernet cable as the sole source of  electricity to power the network camera along with heating/demisting. The PUNTO Hi-PoE provides high reliability and flexibility of the network installation and simplifies installation operations with important cost reduction.

Videotec HPV42K1A000 is a sturdy tamper-proof housing designed to simplify the installation and service and guarantee total protection against all environmental conditions. It is entirely constructed from technopolymer and offers high impact resistance, high weather protection from external agents and UV rays.

Videotec HEB26K1A000B is a robust and large aluminum housing designed to fit combinations of 1/2", 1/3" and 1/4" cameras and with optics of different kinds. The frontal opening system allows an easy access to the camra and internal connections.

Made of AISI 316L electropolished stainless steel  2 ¾” NPT threaded holes for use of cable glands or conduit  Versions with wiper  Integrated telemetry receiver for version with wiper

Videotec HEB26K2A000B is a robust and large aluminum housing designed to fit combinations of 1/2", 1/3" and 1/4" cameras and with optics of different kinds. The frontal opening system allows an easy access to the camra and internal connections.

Made of AISI 316L electropolished stainless steel  2 ¾” NPT threaded holes for use of cable glands or conduit  Versions with wiper  Integrated telemetry receiver for version with wiper

Videotec HOV32K2A000 features a robust aluminum housing designed to simplify the installation and service and guarantee total protection against all environmental conditions. Its size makes it ideal for housing various combinations of standard cameras with fixed or compact zoom lenses.

Videotec HPV42K2A016 is a sturdy tamper-proof housing designed to simplify the installation and service and guarantee total protection against all environmental conditions. It is entirely constructed from technopolymer and offers high impact resistance, high weather protection from external agents and UV rays.

Videotec EXHC housing has a cylindrical body and is closed on the opposite sides by two 12mm thick flanges. The housing is supplied with two holes for the 3/4" NPT cable glands. The camera housing is equipped with heater and optional sunshield.

Videotec HTG37K2A000 housing has been designed to fit thermal cameras with large lenses for vision even in total darkness, fog, rain,s moke or for long distances. It is possible to use it for a wide range of day/night surveillance systems, such as monitoring and rescue in the event of fire, public safety.

Videotec NXCW is a corner mount adapter made of AISI 316L electropolished stainless steel.

Videotec EXWBJ is a bracket and ball joint for explosion-proof housing. It has epoxpolyester powder painting.

Pre-cabled for Ethernet, video, I/O and telemetry connections     Equipped with barrier cable gland     Resistant to oil, flames and ultra-violet rays     Designed for potentially explosive zones

Videotec WBCD19A is part of WBCD series of wall and ceiling brackets with a load rating of 1kg. Users can fix the adjustment and fixing by only one bolt.

Videotec NXPTZCW  is a corner mount adapter made of AISI 316L electropolished stainless steel. It has a load rating of 50 kg.

Videotec WBLA is a wall bracket with load rating of 70 kg.

Vidoetec PTCC1 is a pole mount adaptor made of aluminum.

Wide-D (wide dynamic range):? ?130dB De-fog: On/Off Speed in proportion to zoom Zone masking (pan angle or pan/tilt angles) Electronic stabiliser

Videotec MMXCWCOL is a pole and corner adapter module.

Videotec NXW0K1025 NXW housing is entirely constructed from electropolished stainless steel and consists of a body with a double chamber for the circulation of a cooling liquid or air. The NXW is enclosed by two thick flanges at either end and allows cables to pass through by means of two PG13.5 cable glands on the back flange. The front flange can be equipped with tempered glass or quartz glass for higher temperature.

Videotec HEB32K2A000B is a robust and large aluminum housing designed to fit combinations of 1/2", 1/3" and 1/4" cameras and with optics of different kinds.

Videotec HGV52K2A200 part of HGV housing is ideal for outdoor monitoring of great distances for applications in public safety, harbours, coastlines, airports, environmental monitoring and border surveillance.

Videotec HPV42K2A700 is a polycarbonate housing with Intelligent Power Management technology.  The HI-POE IPM system automatically detects all the options, like heating, fan and illuminator and then autonomously balances the power to ensure suitable distribution of the same to the connected device.

Videotec LXBKC1 is a wall and ceiling mount bracket made with load rating of 1 kg. Users can make adjustment and fixing by only one bolt.

Videotec NXPTZTW is a parapet or ceiling mounting bracket made of AISI 316L electropolished stainless steel.

Videotec HEG37K1A143 is a robust and large housing suitable for a variety of applications, for the monitoring of urban and highways, in particular if coupled with the PTH900 P&T series. The opening system allows an easy access for installation and servicing.

Videotec UPTWBTAB is a parapet bracket made of die-cast aluminum. It also has epoxypolyester power painting.

Videotec NXFWBT  is a parapet mounting bracket made of AISI 316L electropolished stainless steel with load rating of 70 kg.