Vicon Security devices

IQeye IQM61NE-B5 true day/night IP Dome Camera that features: Built-in IR illuminator (up to 50 ft/15 m) On-camera storage (Micro SDHC) Two-way audio True day/night movable IR filter Power-over-Ethernet

Vicon VN-VMC-SE is a virtual matrix controller.

Vicon V-CELL-PLATE cover plate for speaker

Vicon V-CELL-REM is a remote control

DTK-IBNC28 is a coaxial line surge protection that protects fixed or PTZ camera video feeds. It is recommended for applications where AC power is already protected and ground is unavailable.

Vicon V-POE-CS2 is a combiner/splitter for co-locating any two Anavio readers/cameras.

Vicon VMDC-XX series virtual matrix display controller provides a scalable matrix control solution for small and large installations. The VMDC is comprised of both a matrix command/control center software interface and a hardware decoding component that enables the remote network video streams to be displayed on multiple monitors in multiple locations.

Vicon VMDC-XV8 is a Virtual Matrix Display Controller that provides a scalable matrix control solution for small and large installations. It is available in tower and rack configurations. The VMDC is comprised of both a matrix command/control center software interface and a hardware decoding component that enables the remote network video streams to be displayed on multiple monitors in multiple locations.

Ceiling/Pendant, indoor, chrome

Vicon VN-SAN-18-3000R5 is a storage area network device that provide a high-density storage solution which can be used for primary and/or backup data storage. The VN-SAN units maybe located long distances from the ViconNet® NVRs or DVRs over a standard Ethernet connection.

Vicon VN-SAN-18-4000R5 is a storage area network device that provide a high-density storage solution which can be used for primary and/or backup data storage. The VN-SAN units maybe located long distances from the ViconNet® NVRs or DVRs over a standard Ethernet connection.

Vicon VN-SAN-48-2000R5 is a storage area network device that provide a high-density storage solution which can be used for primary and/or backup data storage. The VN-SAN units maybe located long distances from the ViconNet® NVRs or DVRs over a standard Ethernet connection.

Vicon VN-NVR-XXXXV6 is a network video recoder that offer a variety of storage options including internal or external RAID and MPEG-4, M-JPEG or H.264 compression.

Vicon KOL-iRAID24 RAID array device provides a high-density storage solution that can be used for primary and/or backup data storage. It is reconfigured at the factory for RAID 5 storage and can be set up to support up to 4 NVRs or DVRs each. No special power requirements are necessary, it operates with 115/230 VAC input power.

Vicon KOL-iRAID Storage System is an array devices that provide a high-density storage solution which can be used for primary and/or backup data storage. The KOL-iRAID units maybe located long distances from the ViconNet® NVRs or DVRs over a standard Ethernet connection.

Vicon VN-KPR-SE is a Kollector pro recorder.

Vicon VN-KN/KL-SE is Kollector Network Servers / Kollector Lite Recorders

Vicon VN-NVR-SE is a network video recorder.

Vicon VN-SAN-9-2000R5 is a storage area network device that provide a high-density storage solution which can be used for primary and/or backup data storage. The VN-SAN units maybe located long distances from the ViconNet® NVRs or DVRs over a standard Ethernet connection.

Vicon VN-SAN-18-2000R5 storage area network device provide a high-density storage solution that can be used for primary and/or backup data storage. The VN-SAN units maybe located long distances from the ViconNet® NVRs or DVRs over a standard Ethernet connection.

The NETSWITCH-16A Network Switch provides advanced switching technology that boosts network performance. It is compatible with all major network operating systems. In addition to full duplex data transfer, the NETSWITCH-16A provides outstanding data efficiency, ensures reliable communications during full-duplex operation and supports large data transfers.

Vicon VN-KE-SE is an elite recorder.

Vicon KOL-iRAID16 RAID array device provides a high-density storage solution that can be used for primary and/or backup data storage. It is reconfigured at the factory for RAID 5 storage and can be set up to support up to 4 NVRs or DVRs each. No special power requirements are necessary, it operates with 115/230 VAC input power.

Vicon V1400X-IDL provides convenient connection of a Vicon-based CPU Control System to a maximum of 10 Vicon Input or Output Devices using RS-422/485 protocol on 6-position, removable Terminal Block connectors. The IDL shall have intelligence by employing a microprocessor to monitor the system status. It shall have the capability of detecting corrupt Station and CPU line communication and displaying their status using front panel LEDs.

Vicon V1300X-IA-230 is a 32 alarm interface that allows external alarm devices to be connected to a Nova (VPS) digital control CPU.

HP V1905 Switch Series devices are smart managed fixed-configuration Fast Ethernet Layer 2 switches designed for small businesses looking for key features in an easy-to-administer, low-cost solution. The series, which includes a Gigabit Ethernet switch, has the following models: 24- and 48-port non-PoE switches, 8- and 24-port PoE Fast Ethernet switches, and a 10-port PoE Gigabit Ethernet switch.

HP V1905 Switch Series devices are smart managed fixed-configuration Fast Ethernet Layer 2 switches designed for small businesses looking for key features in an easy-to-administer, low-cost solution. The series, which includes a gigabit ethernet switch, has the following models: 24- and 48-port non-PoE switches, 8- and 24-port PoE fast ethernet switches, and a 10-port PoE gigabit ethernet switch.

Vicon ADAM-6050 is a I/O device that fits seamlessly into an existing ViconNet® network to allow external alarm inputs and outputs to any NVR, Workstation or Kollector DVR. The unit provides 12 digital inputs (sensors) and 6 digital outputs (relays). This high-density I/O module has a built-in 10/100 based-T interface for seamless Ethernet connectivity. The unit is compatible with Windows® XP, Vista™ and 7.0 operating systems and ViconNet 6.6 and higher.