Vanderbilt Security access systems

Designed for opening surveillance of windows, doors and containers Mounted in window and door frames of non-magnetic materials 15 m cable

This tamper kit can be used with the DC22, SR34i, SR35i and ACC-Lite. It triggers a tamper alarm in the system if the controller is removed from the wall.

The kit contains one each of the following:*AP01P*VR11S-MF

MK-2000-2 is a flange for steel mounting including magnet. Dimensions: 46 x 30 x 1.5 mm

MK-3000-11 is a flange for recess installations in wood, aluminum and other non ferromagnetic materials.

The Siemens End of Line board, AO-PE01 is the most flexible solution for 2-wire installations with and without end of line resistor. The same board is suitable for ADM-xxx detectors with and without antimask function. Different resistor values are selectable by DIP switch.

Includes encoding and sequential stamp number.  Minimum order quantity is 100 cards. NOTE: Encoding encrypted for use with Vanderbilt Access Control Systems.

Pole mounting cover for IS443, IS444 and IS445 beams. Special cover designed to weather-proof beams when mounted on round poles outside. Pole size 38~45 mm diameter, weight 0.615 kg. 1 pair per carton available in a packing unit.

The IRS272 black curtain mirror has overlapping coverage zones forming a complete monitored area to detect persons passing through. 15 m curtain for the IRO840T. 25 m curtain for IR270, IRM270 and IR160W6.

An expansion license to add biometric readers to the ACT Enterprise system Required for every door where a biometric device is installed

Vanderbilt PRO4200 is a 4 door controller with power supply unit.

Vanderbilt (formerly known as Siemens Security Products) 633-2 is a cotag programmer that enables individual requirements for programming active and passive Cotag cards and tags. It makes it possible to program small batches or individual cards and can be used to create configuration cards to set up any Cotag readers. The programmer can also be configured for an end user‚ so that the customer himself has local control over card issuing.

Siemens ASE5300-AI interface license that enables integration with APOGEE building control system.

SH3 is a protective cover for BM3, BM31 and BM3. There are cuttings for cables to simplify the process of adding it to an existing installation.

The kit contains one each of the following:*AP01P*VR41S-MF

MK-2000-1 is a flange for steel mounting Dimensions: 46 x 30 x 1.5 mm

MK-2000-31 is a flange for steel mounting. Dimension: 19 x 20 mm

MK-2000-32 is a flange for steel mounting.

MK-3000-15 is a housing for surface mounting of the MK-3000 Series magnetic contacts.

Provides output in TTL level or open-collector interfaces. Optics may be high or low resolution, visible or infrared.

The 812-1 cable is 100 meters long and meets the low smoke/zero halogen specification. It consists of three screened twisted pairs and 9 other cores for the complete connection of one door to a Granta system controller.

Surface mounted contact Suitable for doors and windows surveillance High functional reliability through an integrated carrier board

The kit contains one each of the following:*AP01M-2420*VR40S-MF

MK-1400 is a magnetic contact with 3-pole screw terminal.

SH1 is a universal protective cover for card readers. It is recommended for outdoor installations.

SH2 is a protective cover for K42, K44Duo, M43, PP500-EM and PP500-Cotag. There are cuttings for cables to simplify the process of adding it to an existing installation.

A white exit button with a blue label and key symbol on For inside use Surface mount 

Vanderbilt EMK48LSA-W4M is a recess mount magnetic contact suitable for doors and windows surveillance.