CEM Security access systems

The CEM S610 Exit Reader features two changeover relay outputs to activate door strike or other equipment. It is also easy to install and is available with integrated reading support for 125 kHz HID Proximity, 13.56 MHz smartcard technology including DESFire, Mifare, HID iClass, and PicoPass.

CEM CRD/229/004 DESFire 13.56MHz read/write contactless smart card can be used for a range of different applications from access control to other applications such as cashless vending and public transportation. Using a standardized Mifare Application Directory (MAD), the card contains a structured file system offering security for multiple applications and to support future growth. Utilizing Advanced Encryption Standard (AES) -128-bit encryption, the information is securely stored on the card, ensuring that it cannot be cloned and that only valid cards are granted access.

CEM DCM/300/101 is an intelligent two door controller that also includes enclosure, board & power supply/ battery charger. Using a powerful 32bit processor, it gives full off-line validation and decision making capability at the point of entry, when host communication is not available.

CEM CRD/218/008 DESFire 13.56MHz read/write contactless smart card can be used for a range of different applications from access control to other applications such as cashless vending and public transportation. Using a standardized Mifare Application Directory (MAD), the card contains a structured file system offering security for multiple applications and to support future growth. Utilizing Triple DES (3DES) encryption, the information is securely stored on the card, ensuring that it cannot be cloned and that only valid cards are granted access.

CEM RDR/612/119 is an exit card reader with PIN designed for use as part of an integrated on-line access control system. The Exit Reader is an extension to the master reader, providing a combined total of features at the point of entry. It communicates directly with the master reader.

CEM CRD/218/004 DESFire 13.56MHz read/write contactless smart card can be used for a range of different applications from access control to other applications such as cashless vending and public transportation. Using a standardized Mifare Application Directory (MAD), the card contains a structured file system offering security for multiple applications and to support future growth. Utilizing Triple DES (3DES) encryption, the information is securely stored on the card, ensuring that it cannot be cloned and that only valid cards are granted access.

CEM AC2000 Guard Tours provides the facility to define a list of readers/ inputs that a security guard must visit in a certain order and within a specified time period. If the guard does not either swipe at a pre configured card reader time or activate a pre configured input within the guard tours parameters, an alarm will be sent to the AC2000 AED (Alarm Event Display) application.

CEM DCM/300/006 is an intelligent two door board only controller designed to interface third-party read heads with the CEM range of access control systems. It has an on-board 10/100 Ethernet connection and communicates directly with the AC2000 central system. Using a powerful 32bit processor, it gives full off-line validation and decision making capability at the point of entry, when host communication is not available.

CEM DESFire contactless smart card comes with blank and unused memory keys that can be used for other applications. It also comes with a flexible filing system based on applications and files contained witthin the applications.

CEM SWVINT-MOBO AC2000 Mobotix interface provides the ability to associate access control alarms with Mobotix digital video clips. This enables AC2000 to act as the central Security Management System. The video interface seamlessly integrates AC2000 with Mobotix cameras, giving the operator a range of video imaging facilities to generate alarm reports with recorded video playback. The interface also allows system operators to view live video feed and control the camera’s view and run presets.

CEM SWHDVR-AD AC2000 American Dynamics HDVR interface provides the ability to associate access control alarms with digital video clips and to view live camera footage. This enables AC2000 to act as the central Security Management System. The AC2000 Video Configuration module seamlessly integrates AC2000 with the HDVR, giving the operator a range of facilities to generate alarm reports with recorded video playback. The high level two-way interface allows a user to fully integrate the power of an American Dynamics HDVR video system into the central AC2000 AED (Alarm and Event Display) application.

CEM SYS/601/128 is an AC2000 Lite Software Only Virtual Kit 128 door license. It allows users to run the complete AC2000 Lite access control system within a virtual environment, running on a Windows 7 PC

CEM SWNVR-IV AC2000 IndigoVision NVR interface provides the ability to associate access control alarms with IndigoVision NVR digital video clips. This enables AC2000 to act as the central Security Management System. The AC2000 DVR Viewer module seamlessly integrates AC2000 with IndigoVision NVR, giving the operator a range of video imaging facilities to generate alarm reports with recorded video playback. The interface also allows system operators to view live video feed and control camera positioning. The system allows a user to fully integrate the power of a IndigoVision NVR video system into the central AC2000 Alarm Event Display (AED) application. AED enables all alarms, events and associated camera footage to be displayed centrally on the AC2000 system.

CEM SWNVR-EX AC2000 exacqVision interface enables AC2000 to act as a flexible and fully integrated Security Management System. It provides the ability to define video alarm actions, view live footage as alarms occur and control cameras and run camera presets. The AC2000 DVR Video Configuration module seamlessly integrates AC2000 with exacqVision Video Management System servers. This will give operators the ability to define video alarm actions, search alarm feeds and playback recorded video from alarms.

CEM SYS/601/064 is an AC2000 Lite Software Only Virtual Kit 64 door license. It allows users to run the complete AC2000 Lite access control system within a virtual environment, running on a Windows 7 PC.

CEM SYS/601/032 is an AC2000 Lite Software Only Virtual Kit 32 door license. It allows users to run the complete AC2000 Lite access control system within a virtual environment, running on a Windows 7 PC.

CEM SWINT - INTEGRA AC2000 Satel Integra alarm interface enables alarms from Integra alarm panels to be fully integrated with the AC2000 access control system. This enables AC2000 to act as the central Security Management System. The interface enables inputs from intruder panels to be placed as icons on the AC2000 AED (Alarm Event Display) application. This provides, on a single screen, a graphical representation of the physical layout of intruder sensors and allows for central alarm monitoring of both access control and intruder alarms.

CEM AC2000 access control and security management system is ideal for large facilities, such as oil refineries. ports, airports, hospitals, casinos, universities and corporate premises. AC2000 provides high levels of integration by using industry standard interfaces to link with third party security systems. With an internal database offering built-in intelligence, CEM readers have been designed with ease of installation in mind and can be programmed and managed remotely to receive updates within minutes.

CEM SWXML AC2000 XML interface provides a simple and efficient way to import basic cardholder details into the AC2000 access control system. The import process allows incremental updates from a third party source and will support a large single batch import that is typically required during a new system setup. It also provides customers with a frequent data transfer link from many third party systems such as Human Resource systems. The interface enables the bulk adding and updating of personnel records, such as surname and card number.

CEM AC2000 Data Import Tool allows system administrators to import 3rd party cardholder details into the AC2000 Personnel application, which stores cardholder information on the access control system. It simplifies the bulk loading of data from a 3rd party system which is typically required during a new system installation. This removes the need for duplicate data entry and offers users a quick and efficient method of importing data into the AC2000 system. Using the interface tool, an unlimited number of records, including cardholder photographs, can be easily brought into the AC2000 system, eradicating the requirement for customized software development or time consuming database scripts.

CEM SPASS-IPO-2X0-B is a access control reader with LCD display, keypad and onboard database.

CEM AC2000 Biometric Enrollment provides a single biometric and card validation process using the AC2000 systems. AC2000 allows users to predefine a “Bio NOT Required” Timezone. This Timezone allows the S610f fingerprint readers to provide card only access, rather than card plus fingerprint, during certain times of the day.

CEM SYS/500/001 is an AC2000 Lite System Server license upgrade from 64 to 128 doors.

CEM RDR/611/10X is a card reader with LCD display, keypad and onboard database.

CEM SYS/650/128 is an AC2000 Lite System Server - Dell Server with 128 door license.

CEM SYS/650/064 is an AC2000 Lite System Server - Dell Server with 64 door license.

CEM SYS/500/000 is an AC2000 Lite workstation license.