Bosch Security camera systems

Outdoor housing for (24 VAC / 12 VDC) camera with 24 VAC power supply, blower, external BNC and power connectors Protects camera/lens combinations up to 262 mm (10.32 inch) in length Stylish and sturdy housing (IP66; IK10; NEMA 4X) Hinged side opening for easy installation and camera setup Sunshield included Heater and window defroster

Outdoor housing for (230 VAC / 12 VDC) camera with 230 VAC power supply and feed-through cabling Protects camera/lens combinations up to 262 mm (10.32 inch) in length Stylish and sturdy housing (IP66; IK10; NEMA 4X) Hinged side opening for easy installation and camera setup Sunshield included Heater and window defroster

Pole mount adapter suitable for installation of accessories such as Bosch surveillance cabinets on a pole or mast Modular design for fast and easy installation Weather resistant finish

Scale-up network storage solution: controller unit with 12 internal HDDs expandable via state-of-the-art SAS interface-connected expansion units 12 x 16 TB HDD Configurable hardware-based RAID/DDP protection (RAID‑5, RAID‑6 or DDP) for highest system performance Redundant hot-swappable power supplies and cooling fans Two 10 Gigabit Ethernet ports for highest speed iSCSI connectivity Fully modular design for ease of service

Compact pole mount adapter for direct installation of the Bosch pendant wall mount Modular design for fast and easy installation Vandal resistant design for indoor and outdoor use Weather resistant finish

Bosch DIP-7042-2HD is an all-in recording, viewing and management solution for network surveillance systems up to 64 channels. DIVAR IP 7000 is an intelligent IP storage device that eliminates the need for separate NVR (Network Video Recorder) server and storage hardware. It features highly energy-efficient hotswap redundant power supplies, as well as frontswappable SATA-II hard drives providing up to 8 TB of gross storage capacity.

Certified all-weather active IR surveillance camera specifically designed for perimeter surveillance and other outdoor low-light applications Dinion 2X imaging with wide dynamic capability to handle the most demanding lighting situations 940 nm, 3D diffuser and Constant Light illumination, PAL Variable Field Illumination technology provides unmatched low-light and no-light performance Integrated junction box, remote control, and complete external adjustments minimize installation time and cost

Scale-up network storage solution: controller unit with 12 internal HDDs expandable via state-of-the-art SAS interface-connected expansion units 12 x 12 TB HDD Configurable hardware-based RAID/DDP protection (RAID‑5, RAID‑6 or DDP) for highest system performance Redundant hot-swappable power supplies and cooling fans Two 10 Gigabit Ethernet ports for highest speed iSCSI connectivity Fully modular design for ease of service

The EX12LED is a versatile and economical infrared illuminator that provides covert lighting for short-range indoor and outdoor security and surveillance applications. At a fraction the power of a standard light-bulb, the EX12LED enables standard day/night CCTV systems to deliver high-contrast images in complete darkness.

Certified all-weather active IR surveillance camera specifically designed for perimeter surveillance and other outdoor low-light applications Dinion 2X imaging with wide dynamic capability to handle the most demanding lighting situations 850 nm, 3D diffuser and Constant Light illumination, PAL Variable Field Illumination technology provides unmatched low-light and no-light performance Integrated junction box, remote control, and complete external adjustments minimize installation time and cost

Certified all-weather active IR surveillance camera specifically designed for perimeter surveillance and other outdoor low-light applications Dinion 2X imaging with wide dynamic capability to handle the most demanding lighting situations 850 nm, 3D diffuser and Constant Light illumination, NTSC Variable Field Illumination technology provides unmatched low-light and no-light performance Integrated junction box, remote control, and complete external adjustments minimize installation time and cost

Bosch UHO-HBGS-11 outdoor housing enables to use the DINION family of cameras in an outdoor environment or in areas where the cameras need to be protected. The hinged, side-opening design allows easy installation of camera/lens combinations, and gives access to the controls even when the housing is mounted. Power and video cabling can be routed through feed-through fittings. Mounting holes in the base can be used to install the housing on a wide range of pan/tilts, adjustable heads, and various camera mount brackets. The aluminum-constructed housing has two heaters as well as sunshield.

Bosch LTC 3293/20 is a 1/2 inch zoom lens is a compact, rugged, 1/3-inch and 1/2-inch image format auto iris lenses. Their high sensitivity and reliability provide optimal performance in all environments. It has been designed to withstand the frequent control operations of the iris, zoom, and focus operations.

Bosch MIC-IP-PS-115 is a 115 VAC IP-enabled power supply unit for MIC Series cameras. It ensures that the cameras can be installed in a variety of locations, including low voltage and mobile applications. It conforms to the National Transportation Communications for ITS Protocol (NTCIP) specification. NTCIP conformance ensures that the power supply unit integrates with transportation management devices. It has UL, CE, and FCC approval, is rated to IP67 as well as supports 50/60 Hz.

Bosch LTC3364/60 is a 1/3inch varifocal lens that allow for setting virtually any angle of field, which maximises surveillance effects. I

Bosch UPA-12300-60 power supply unit is designed specifically for the continual use demands of professional surveillance products. While the unit is used primarily with security cameras, its small size and high energy efficiency rating also make it ideal for powering a wide range of other low power security products, including many Allegiant® system accessories and control devices.

60 W power supply Constant Voltage design for external LED lighting applications Built-in active Power Factor Correction (PFC), typically > 0.93 Turn on time < 1 second with soft start Protection: Over-Load, Over Current, Open Circuit, Short Circuit, Over Temperature

100 W power supply Constant Voltage design for external LED lighting applications Built-in active Power Factor Correction (PFC), typically > 0.93 Turn on time < 1 second with soft start Protection: Over-Load, Over Current, Open Circuit, Short Circuit, Over Temperature

Bosch UPA-2410-60 power supply unit is designed specifically for the continual use demands of professional surveillance products. While the unit is used primarily with security cameras, its small size and high energy efficiency rating also make it ideal for powering a wide range of other low power security products, including many Allegiant® system accessories and control devices.

35 W power supply Constant Voltage design for external LED lighting applications Built-in active Power Factor Correction (PFC), typically > 0.93 Turn on time < 1 second with soft start Protection: Over-Load, Over Current, Open Circuit, Short Circuit, Over Temperature

A white adapter used to attach an MBE-27 or MBE-28 wall mount bracket, along with an EXMB.020B Heavy Duty L Bracket, to a pole Heavy-duty aluminum construction Semi-gloss polyester powder-coat finish Suitable for pole applications Adapter plate features versatile hole patterns for attaching a host different brackets

A black adapter used to attach an MBE-27 or MBE-28 wall mount bracket, along with an EXMB.020B Heavy Duty L Bracket, to a pole Heavy-duty aluminum construction Semi-gloss polyester powder-coat finish Suitable for pole applications Adapter plate features versatile hole patterns for attaching a host different brackets

A white adapter used to attach an MBE-27 or MBE-28 wall mount bracket, along with an EXMB.020B Heavy Duty L Bracket, to a wall Heavy-duty aluminum construction Semi-gloss polyester powder-coat finish Suitable for wall applications Adapter plate features versatile hole patterns for attaching a host different brackets

A black adapter used to attach an MBE-27 or MBE-28 wall mount bracket, along with an EXMB.020B Heavy Duty L Bracket, to a wall Heavy-duty aluminum construction Semi-gloss polyester powder-coat finish Suitable for wall applications Adapter plate features versatile hole patterns for attaching a host different brackets

Bosch UPA-2430-60 power supply unit is designed specifically for the continual use demands of professional surveillance products. While the unit is used primarily with security cameras, its small size and high energy efficiency rating also make it ideal for powering a wide range of other low power security products, including many Allegiant® system accessories and control devices.

The Bosch series of Universal Monitor Mounts (UMM) are designed to mount any VESA®-compliant monitor to a wall or in a rack-mount cabinet, up to 12 kg (26.5 lb) in weight. The wall mounts offered in the series of Universal Monitor Mounts (UMM) are the UMM-LW-20B, the UMM-LW-30B and the UMMWMT-32.

Enables weatherproof (IP66) installation for outdoor & IR variants of the AUTODOME IP 5000i Modular design for fast and easy installation Weather resistant finish Vandal resistant design for indoor and outdoor use

Integrated swivel function ensures the camera is always mounted perfectly level Modular design for fast and easy installation Weather resistant finish Vandal resistant design for indoor and outdoor use