Bosch Door access control

Brown surface mount contact Closed loop Flange mount with special adhesive Side leads

Brown recessed contact with 19 mm (0.75 in.) diameter, includes a standard magnet Closed loop Sensitive non-stick rhodium reed Bent long leads keep solder off the glass of the reed Two solder points on the wire Thick plastic shell resists crushing A rugged, one-piece construction eliminates the need for extra donut adapters The compact design allows to use the contact in smaller spaces Use on steel doors in standard or tight-fitting applications

Compact access terminal (surface-mounted) with reader unit for proximity cards and keypad for PIN code entry and configuration Self-sufficient operation Transaction memory for a maximum of 1000 transactions; transaction consists of personal ID, time, date and type of transaction Maximum of 2000 personal IDs Configurable PIN code block after a specified number of incorrect entries Quick personal activation by showing card Alarm via auxiliary relay It is possible to connect it to an access controller via the Wiegand interface

An internal magnetic reed switch contact For monitoring doors and windows Supervised for low-battery, cover-tamper, and removal from mounting surface tamper conditions

LSN shutter door contact for monitoring shutter, sliding, and garage doors High level of mechanical strength Parallel mounting For connecting to LSN intrusion control panels VdS class B, EN 50131-2-6 Grade 2

Brown recessed contact with 19 mm (0.75 in.) diameter Closed loop Terminal connection design Does not require soldering or splicing Use on steel doors in standard or tight-fitting applications

RS485/OSDP and 26 Bit Wiegand interface Supports the data record of Bosch coded MIFARE classic cards and keyfobs and CSN of ISO14443A credentials Three LED indicators and a beeper give clear feedback to the user during operation IP65 rated for indoor and outdoor use Wall or mullion mount Tamper switch

LSN shutter door contact for monitoring shutter, sliding, and garage doors High level of mechanical strength Parallel mounting Tamper surveillance VdS class C, EN 50131-2-6 Grade 3

RS485/OSDP and 26 Bit Wiegand interface Supports the data record of Bosch coded MIFARE classic and DESFire EV1 cards and keyfobs and CSN of ISO14443A credentials Equipped with keypad Three LED indicators and a beeper give clear feedback to the user during operation IP65 rated for indoor and outdoor use Wall or mullion mount Tamper switch

ICLASS Adhesive Tag with 2 Kbyte data storage 16 application areas, 15 of which can be customized Tags have an embedded wire antenna and an ICLASS chip The Adhesive Tag is recognized and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz ICLASS Adhesive Tags are dynamic credentials with application areas that can be individually protected All credentials have a unique chip number and a customer (or facility) code ICLASS adhesive tags with an iClass chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Adhesive tags are very easy and convenient to use Reading ranges reach up to 5 cm depending on the readers used

The contact is available in a metal finish Closed loop Wide gap Ideal for commercial applications

The contact is available in a metal finish Uses epoxy and a special push-pin to hold the armored cable firmly in place Closed loop Includes adjustable magnetic assembly bracket

An access control system for stand-alone application or for integration with other systems, such as the Bosch video management system BVMS or Bosch B and G series intrusion panels As a stand-alone system, it features a simple-to-use map and alarm viewer for a rapid assessment of all the devices and entrances on the site As an integrated system, it allows the operator of a video management system to perform door-related tasks like video-based ID  verification, to grant and deny access, or to disable doors Intrusion areas can be armed directly from the Map View, and intrusion panel users can be centrally managed Combines high-end access control features, performance and availability with intuitive operation Web-based visitor management Comprehensive security management: Integrates with intrusion and video systems Highly scalable Easy to configure

White surface mount contact Closed loop Flange mount with special adhesive Side leads

ICLASS Adhesive Tag with 2 Kbyte data storage 2 application areas, one of which can be customized Tags have an embedded wire antenna and an ICLASS chip The Adhesive Tag is recognized and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz ICLASS Adhesive Tags are dynamic credentials with application areas that can be individually protected All credentials have a unique chip number and a customer (or facility) code ICLASS adhesive tags with an iClass chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Adhesive tags are very easy and convenient to use Reading ranges reach up to 5 cm depending on the readers used

ICLASS ID card with 2 Kbyte data storage 2 application areas, one of which can be customized Cards have an embedded wire antenna and an ICLASS chip The card is recognized and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz ICLASS cards support multiple application areas that can be individually protected All credentials have a unique chip number and a customer (or facility) code Contactless credentials with an iClass chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Reading ranges reach up to 12.5 cm depending on the readers used

Self-contained transmitter with radio frequency (RF) wireless magnetic reed switch contact Concealed, recessed mounting in doors or windows for unobtrusive security Cylinder enclosure designed for durability Supervised for low-battery and cover-tamper conditions

White recessed contact with 25 mm (1 in.) diameter, includes a standard magnet Closed loop Sensitive non-stick rhodium reed Bent long leads keep solder off the glass of the reed Two solder points on the wire Thick plastic shell resists crushing A rugged, one-piece construction eliminates the need for extra donut adapters The compact design allows to use the contact in smaller spaces Use on steel doors in standard or tight-fitting applications

Provides a quick, hassle-free experience for visitors Supports receptionists with features that make their many tasks smooth, efficient and secure Keeps track of expected, checked-in and overdue visitors Handles even high visitor volumes as smoothly and efficiently as possible Allows hosts to easily pre-register their visitors for smoother, faster processing on the day

Provides a quick, hassle-free experience for visitors Supports receptionists with features that make their many tasks smooth, efficient and secure Keeps track of expected, checked-in and overdue visitors Handles even high visitor volumes as smoothly and efficiently as possible Allows hosts to easily pre-register their visitors for smoother, faster processing on the day

MIFARE Classic ID card with 1 kByte data storage 2 application areas, one of which can be customized MIFARE cards have a wire antenna and a MIFARE Chip embedded The card is recognized and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz The credit card sized card conforms to the ISO-standard size enabling surface printing with conventional ISO compatible card printers MIFARE cards support multiple application areas that can be individually protected The unique badge number is printed on top of the card enabling contactless reading by readers Contactless credentials with MIFARE chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions The card is durable with IP68 and can be fully submerged, all the electronics are sealed inside

White recessed contact with 19 mm (0.75 in.) diameter, includes a standard magnet Closed loop Sensitive non-stick rhodium reed Bent long leads keep solder off the glass of the reed Two solder points on the wire Thick plastic shell resists crushing A rugged, one-piece construction eliminates the need for extra donut adapters The compact design allows to use the contact in smaller spaces Use on steel doors in standard or tight-fitting applications

White surface mount contact for standard applications Closed loop Standard industry size

LSN surface-mount magnetic contact for release monitoring of doors and windows Parallel mounting Installation in ferromagnetic materials is permissible by using the EG1 flush mounting housing For connecting to LSN security systems

White recessed contact with 19 mm (0.75 in.) diameter Closed loop Terminal connection design Does not require soldering or splicing Use on steel doors in standard or tight-fitting applications

ICLASS ID card with 2 Kbyte data storage 16 application areas, 15 of which can be customized Cards have an embedded wire antenna and an ICLASS chip The card is recognized and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz ICLASS cards support multiple application areas that can be individually protected All credentials have a unique chip number and a customer (or facility) code Contactless credentials with an iClass chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Reading ranges reach up to 12.5 cm depending on the readers used

ICLASS keyfob with 256 byte data storage Fastening Slot ICLASS chip

White surface mount contact for heavy steel doors and commercial wide gap applications Closed loop Standard industry size