Nedap, the foremost specialist in advanced vehicle identification solutions, has upgraded its ANPR Lumo license plate reader for vehicle access control with Open Supervised Device Protocol (OSDP) ensuring greater site security. The ANPR Lumo is one of the world’s first all-in-one license plate recognition systems compatible with the OSDP protocol V.2.1.7. The OSDP upgrade within Nedap’s ANPR Lumo camera makes it possible to improve vehicle gate access in a trusted and secure manner. Which enables security managers to further improve their site security. OSDP offers enhanced security For security professionals, a secure facility is the number one priority within the world of access control. The introduction of the OSDP compliancy offers enhanced security to gate access control solutions in high-security applications. OSDP enables advanced and secure communication between the reader and access control panel that supports this protocol as well. An increasing number of security and access control systems are supporting OSDP technology. ANPR Lumo compatible with OSDP The all-in-one license plate camera ANPR Lumo has a powerful OCR (optical character recognition) and advanced software intelligence built-in. ANPR Lumo’s smart learning algorithms help read license plate formats It features the fastest and most accurate recognition of vehicle license plates in a range of action of 2 to 10 meters even in high-speed traffic flows. Both IR-reflective and non-reflective plates as well as standard and custom license plate formats can be read reliably due to the ANPR Lumo’s smart learning algorithms. Key advantages ANPR Lumo is now compatible with OSDP V.2.1.7. Key advantages of using the OSDP enabled license plate recognition in Physical Access Control Systems are: Advanced security: OSDP supports Secure Channel Protocol (128-bit AES encryption) and therefore enables increased security. This protocol is essential for exchanging data between the license plate reader and the third-party controller panel. Time-saving and cost-reducing installation: OSDP supports ease of installation and a cost-effective installation of ANPR Lumo. Less wiring is required and longer cable distances can be realized. Simplified project deployments result in a reduction of the total cost of ownership. Open industry standard: OSDP is an open industry standard that creates more flexibility. It features standardized communication, enabling security professionals the opportunity to create flexible and scalable ANPR system integrations. Bi-directional communication: OSDP uses bi-directional communication between the reader and controller, enabling ANPR Lumo readers to be configurated and managed remotely in real-time. Recommended by security professionals “The awareness for OSDP as a more secure communication protocol in comparison to traditional protocols is growing. OSDP is being adopted and recommended by more security professionals specifying access control installations.” “We are delighted with this OSDP upgrade, making ANPR Lumo one of the world’s first license plate recognition systems available for vehicle access control applications that require higher security.” “In addition, we are pleased with offering system integrators a full range of OSDP compatible long-range RFID and ANPR solutions for automatic vehicle identification, enabling them to determine the best product applications to their projects.” Ido Wentink, Proposition Manager at Nedap Identification Systems. Automatic vehicle identification specialist Nedap is specialized in advanced solutions for Automatic Vehicle Identification for over the past decades. They have developed a unique portfolio with high-performance long-range RFID and License Plate Recognition solutions. With this OSDP upgrade, Nedap showcases its continued ability to meet the high-security requirements for demanding applications. With eyes on security, but without compromising on the convenience for the people that are using it.
Nedap adds the multiple technology reader NVITE to their long-range identification product portfolio, for contactless driver identification. As a specialist in systems for long-range identification, Nedap is offering a wide range of solutions to identify vehicles and drivers, without delaying them. NVITE supports reading a wide range of credential technologies, such as Smartcards, Proximity cards and QR codes. The built-in Bluetooth Low Energy (BLE) and Near Field Communication (NFC) modules enable secure communication with third party smartphone applications. Access control applications NVITE is the state-of-the art reader that serves mixed user-groups, such as staff, tenants and visitors, in parking and access control applications. A welcoming experience starts at the gate, specifically for visitors, contractors and other users that come and go on a non-frequent basis. It is often challenging to manage these groups and from experience it is common knowledge that these type of groups can cause challenges that result in queuing at the gate. Nedap provides flexibility to end-users and integrators to manage these types of vehicle flows Offering a reader that supports multiple technologies in one device, Nedap provides flexibility to end-users and integrators to manage these types of vehicle flows using dedicated identification methods depending on user rights. Combined with the other solutions in its product portfolio Nedap is able to accommodate an even larger flow of vehicles, thereby contributing to a seamless entry and exit process at the gate. Multiple credential technologies “Our partners in the field of security now have access to an all-in-one reader that supports multiple credential technologies. In order to further optimize their services for multi-tenant and visitor management combined with physical and parking access control,” says Ido Wentink, Proposition Manager for the solutions portfolio for Automatic Vehicle Identification. “NVITE is the compact, flexible reader that enables users to identify themselves by presenting their card, scanning a QR code or activating their smartphone for having access to the facility.” The NVITE reader supports the following credential technologies: Smartcard (13,56 MHz): LEGIC Advant and Prime, MIFARE (DESfire), HID iClass, Sony Felica Proximity card (125 kHz): Nedap, HID Prox, EM4200, AWID QR: Quick Response and most mainstream 1D and 2D barcodes Bluetooth Low Energy (BLE) and Near Field Communication (NFC) Enabling secure communication To serve a growing number of mobile applications, Nedap has developed the Mobile ID Protocol. This protocol enables secure communication between the reader and any third party smartphone app. Nedap Mobile ID wireless communication protocol is based upon BLE and NFC. With this, the NVITE reader and third party application will perform secure authentication. NVITE supports a variety of well-established industry-standard communication protocols, such as Wiegand and OSDP (Open Supervised Device Protocol). These protocols enables seamless communication between the reader and a wide variety of access control panels.
A welcoming experience starts at the gate, specifically for visitors, contractors and other users that come and go on a non-frequent basis. It is often challenging to manage these groups and from experience, it is common knowledge that these type of groups can cause challenges that result in queuing at the gate. Offering a reader that supports multiple technologies in one device, Nedap provides flexibility to end-users and integrators to manage these types of vehicle flows using dedicated identification methods depending on user rights. Combined with the other solutions in its product portfolio Nedap is able to accommodate an even larger flow of vehicles, thereby contributing to a seamless entry and exit process at the gate. Contactless driver identification “Our partners in the field of security now have access to an all-in-one reader that supports multiple credential technologies. In order to further optimize their services for multi-tenant and visitor management combined with physical and parking access control,” says Ido Wentink, Proposition Manager for the solutions portfolio for Automatic Vehicle Identification. “NVITE is the compact, flexible reader that enables users to identify themselves by presenting their card, scanning a QR code or activating their smartphone for having access to the facility.” The NVITE reader supports the following credential technologies: Smartcard (13,56 MHz): LEGIC Advant and Prime, MIFARE (DESfire), HID iClass, Sony Felica Proximity card (125 kHz): Nedap, HID Prox, EM4200, AWID QR: Quick Response and most mainstream 1D and 2D barcodes Bluetooth Low Energy (BLE) and Near Field Communication (NFC) Nedap Mobile ID Protocol Secure communication To serve a growing number of cellphone applications, Nedap has developed the Mobile ID Protocol. This protocol enables secure communication between the reader and any third-party smartphone app. Nedap Mobile ID wireless communication protocol is based upon BLE and NFC. With this, the NVITE reader and third party application will perform secure authentication. NVITE supports a variety of well-established industry-standard communication protocols, such as Wiegand and OSDP (Open Supervised Device Protocol). These protocols enable seamless communication between the reader and a wide variety of access control panels.
Nedap Identification Systems is excited to share the upcoming OSDP upgrade within Nedap’s long-range RFID reader portfolio for automatic vehicle identification. The portfolio will be upgraded and compatible with V.2.1.7 of the Open Supervised Device Protocol (OSDP) standard. This upgrade supports the interoperability of the company’s reader portfolio with a growing number of access control and security products. Over the last few years, an increasing number of access control panel manufacturers is supporting OSDP technology and this upgrade enables seamless integration supported by a highly secured communication standard. Nedap will make OSDP V2.1.7 available for both its TRANSIT and uPASS long-range RFID product line. Automatic Vehicle Identification specialist Nedap is specialized in advanced solutions for Automatic Vehicle Identification for over the past decades Open Supervied Device Protocol (OSDP) standard OSDP has been developed by the Security Industry Association (SIA). According to the SIA, OSDP offers high security and advanced functionalities. The protocol enables bi-directional and encrypted communication based on Secure Channel Protocol (SCP). In addition, for example, OSDP enables monitoring wiring to protect against attack threats. Due to the fact that OSDP is offering secure and bi-directional communication between the reader and third party controller platform, the OSDP upgrade enables security professionals to simplify secured vehicle access. Nedap is specialized in advanced solutions for Automatic Vehicle Identification for over the past decades. A unique portfolio is developed by Nedap full with high performance long-range RFID and License Plate Recognition systems. Vehicle access control Nedap has been at the forefront of simplifying secure vehicle access for decades, while keeping the high accuracy in mind. Security and Parking professionals have been able to improve their operations by benefitting from the latest automatic vehicle identification solutions, by choosing Nedap technology. Nedap Identification Systems encourages technical specialists to order a demo kit and validate OSDP in vehicle access control applications. For the security professionals OSDP compliancy offers a great opportunity to talk to the technician’s customer base about the relevancy of OSDP in security and access control. In case of any queries, Nedap also encourages to make contact with their team. To give the users a complete picture of the opportunities of their updated RFID reader portfolio, Nedap Identification Systems organizes a webinar on the 14th of May, 10.00 AM (CEST). Long-range RFID portfolio Within this webinar, Ido Wentink (Proposition Manager) and Hans Rappard (Product Specialist), will present in 30 minutes all ins and outs about Nedap’s OSDP upgraded long-range RFID portfolio. Readers who would like to attend the webinar can register using the link given on the company’s official website.
By implementing Nedap SENSIT sensors with Green Center parking guidance system, traffic flow in Tri-City has increased vastly Tri-City, consisting of the Polish cities of Gdansk, Sopot and Gdynia, introduced the TRISTAR project to improve traffic efficiency. Nedap’s parking sensors are installed to maximize the utilization of the existing on-street parking capacity. TRISTAR Project For Traffic Management In Tri-City Tri-City is the urban area situated on the Baltic coast and is one of Poland’s largest tourist attractions. Each of the three cities offers a very different atmosphere which makes it a very attractive area to both visitors and inhabitants. The area knows a large number of traffic movements on a daily basis, especially in the city centers. These traffic movements cause traffic problems: congestion, accidents and no access to real-time information about public transport and where available parking spaces are available. To reduce and prevent these problems, the TRISTAR project was implemented. Intelligent Transport System & Nedap SENSIT Wireless Parking Sensors The TRISTAR project consists of the deployment of an Intelligent Transport System (ITS). This project comprises five integrated systems to manage public transportation and maximize the utilization of the existing parking facilities. Nedap's parking sensors provide real-time information about the usage of those parking facilities. Nedap’s SENSIT consists of wireless parking sensors that detect in real-time whether or not a single parking bay is occupied and how long it has been occupied. Green Center’s parking guidance system was implemented with SENSIT. The system uses the real-time parking information to guide drivers to available parking spaces via dynamic signs along the roads. "Nedap’s SENSIT turned out to be easy, quick to install and very flexible for integration with the other ITS TRISTAR platforms", says Jakub Osuchowski, Technical Director Green Center Ido Wentink, Business Development Manager at Nedap, says: “We are delighted to have been selected for this mobility project in the Tri-City region of Gdansk. Thanks to our partner Green Center, the system already runs for some time now and proved its value for motorists looking for a parking space. I am sure Polish cities are ready to implement a reliable parking sensor system SENSIT in order to offer citizens great parking services and for operators to improve monitoring and enforcement in these zones.” Increased Traffic Flow By implementing Nedap’s SENSIT sensors with Green Center’s parking guidance system, the traffic flow in Tri-City has increased vastly. Less traffic congestion, and thus decreased pollution, ensures the city remains attractive to its residents and visitors. Additionally, parking utilization is optimized and enforcement can be done more efficiently. "As the parking solutions integrator in the TRISTAR project, Green Center, wanted to provide a reliable and proven solution for the cities motorists. Therefore, choosing Nedap’s parking sensor system was the right way to go for us. Nedap’s SENSIT turned out to be easy, quick to install and very flexible for integration with the other ITS TRISTAR platforms. Dynamic parking occupancy information allows drivers in Gdynia to find available parking spaces quicker and easier, bringing the obvious benefits to the city." says Jakub Osuchowski, Technical Director Green Center
The SourceSecurity.com team attended this year's IFSEC International 2014 with great anticipation to view the new innovations first-hand on show and see how the move to London would impact visitor experience. To capture the show, we have provided a summary of IFSEC in pictures above. Highlights from IFSEC 2014 We saw an overwhelming number of people and products; here is a snapshot of our IFSEC experience for 2014: FLIR SourceSecurity.com attended FLIR’s press briefing which took place on the first day of the show. FLIR emphasized that it was more than just a professional thermal camera company – the company has recently released $499 thermal cameras to the consumer industry. For FLIR, the security market is growing industry. With the acquisition of Lorex in 2012, FLIR will be introducing Lorex products under the FLIR brand (consumer side, not professional) in EMEA. At IFSEC 2014, FLIR also introduced FLIR One- its first consumer camera for the iPhone. HID Global HID Global’s Director of Technical Services, Nick Hislop, talked SourceSecurity.com through its emerging technologies in the form of leveraging Bluetooth LE and NFC. The concept is simple: to make mobile access more convenient. Nick also demonstrated how HID’s products and solutions are relevant for a number of vertical markets including Enterprise, Healthcare, Education and Finance Services. Nedap ID Ido Wentink of Nedap Identification Systems introduced SourceSecurity.com to the Nedap IDS advanced license plate recognition product, ANPR Access HD. The company also introduced uPASS Access, a backward compatibility convertor and UHF ISO Card for improved user experience for uPASS platform. The ANPR Access HD for advanced license plate recognition is a higher resolution lens than its previous release, the ANPR Access camera. Other features of the ANPR Access HD include a more powerful CCV, increased IR illumination and expanded OCR library. SourceSecurity.com’s visit to STI’s booth saw the company emphasize its importance not just within the fire industry, but within the security industry as well Security Technology International (STI) SourceSecurity.com’s visit to STI’s booth saw the company emphasize its importance not just within the fire industry, but within the security industry as well. STI is looking to get the message out there that they’re not just a fire company. Paul Machacek, Sales Team Business Developer, talked SourceSecurity.com through a number of STI’s products including STI’s Polycarbonate Protective Covers, Steel cages, Call Points & Switches and Stand-alone Alarm Systems. Samsung - Changing the face of IP On day two of the show, Samsung hosted a press conference for the global launch of its Open Platform. This new initiative gives users the opportunity to utilize third party APPs with Samsung's WiseNetIII cameras and domes. Tim Biddulph, Product Manager at Samsung, hosted the conference and offered an insight into Samsung's tag line for the show, "Changing the face of IP". Taking a lead in IP technology, Samsung is seeking to give end-users a solution that is effectively future-proof in terms of expandability and its ability to integrate with new technology in the future. Ease of use was also at the top of Samsung's agenda with its "Zero configuration" NVR solution and there was a large focus on the power of integration within different vertical markets. ASSA ABLOY ASSA ABLOY showcased a number of its access security solutions on its impressive stand. SourceSecurity.com met with Thomas Schulz who gave a comprehensive tour of the stand. From ASSA ABLOY Aperio, there was a focus on the benefits of energy saving for its customers with the Aperio range now featuring battery-powered online and offline locks, cylinders, and escutcheons. There was also ABLOY CliQ technology on show which integrates electronics and mechanics, combining mechanical ABLOY PROTEC locking solutions with low-power electronics. A number of access control solution from effeff, Mul-T-Lock, Traka and Yale were also showcased on the stand. VIVOTEK At the VIVOTEK stand, the SourceSecurity.com team were given a tour of the stand which featured their low-light solution and their latest retail solution On day one of the show, VIVOTEK hosted a luncheon in the Crown Plaza hotel, just a stone's throw from the ExCeL center. As well as enjoying a great meal, attendees were privy to the company's main focus for the coming year and its milestones and product roadmap for 2014 and beyond. The warm hosts included: Steve Ma, Executive Vice President at VIVOTEK, Brandy Lin, Team leader at VIVOTEK and Owen Chen, the Chairman of VIVOTEK. During the luncheon, VIVOTEK shared its vision of being seen as more than just a camera manufacturer, rather, as a total solution provider. The message of the importance of integration, an increased awareness of the need for reliability of products and ease of use was key on their agenda. At the VIVOTEK stand, the SourceSecurity.com team were given a tour of the stand wich featured their low-light solution and their latest retail solution, which was made up of a series of mini high definition cameras for discreetness. SALTO Salto showcased its latest wireless access control door solution, the XS4 mini. XS4 Mini includes SALTO Virtual Network SVN and wireless capability with mini installation needs. Embedded in the heart of the product is the latest microprocessor technology, ready for the connected world, open and future-proof for online connection, wireless technology and NFC. Seagate During an editorial briefing with the SourceSecurity.com team, Seagate shared their valuable knowledge of the history of storage manufacturing and stressed the importance of choosing the right storage solution for installations. With the rise of "Big Data" and increased storage needs in the surveillance market this is something which has become much more of a consideration. As one of only three storage manufacturers, Seagate's experience and know-how within the surveillance industry is vast and it hopes to push out its knowledge to the industry to ensure that people know the benefits of choosing a fit-for-purpose storage solution. Western Digital SourceSecurity.com spoke to Martin Jefferson at Western Digital, who gave a very detailed explanation of how the new WD purple surveillance hard drive had been created and why it was fit-for purpose. It was a very insightful presentation of the product and demonstrated the inherent need for the market to understand why choosing the right storage solution is vital to any installation. OptexAt the Optex stand SourceSecurity.com spoke to Aude Desbieres, who gave a breakdown of the latest offering from Optex at the show. Amongst the array of new products on the stand, Optex showcased the new analytics features of its laser Sensor, REDSCAN, and a new people counting solution developed by Giken Trastem. There was also a focus on full integration of its IP sensors with Milestone XProtectand Hawkeye mapping software and new grade 2 and grade 3 detectors. Our very own Larry Anderson also sat down with their MD Mike Shibata to discuss the company's future and development roadmap. During an editorial briefing with the SourceSecurity.com team, Seagate shared their valuable knowledge of the history of storage manufacturing and stressed the importance of choosing the right storage solution for installations Tyco Stephen Carney, Director of Product Management for Video Solutions at Tyco Security Products, set down with SourceSecurity.com to give an insight into their product roadmaps and their main focus for the coming year. He spoke on their concept of Unification which looks at integration at code level rather than simply API level. With the launch of their victor 4.5 Unified Client, they hope to give the end user a solution that is more secure and efficient for businesses and organizations that require an active surveillance environment. He also mentioned Tyco's increased focus on the end user and customer experience being at the heart of how they develop their product offering for the market. Senstar At the Senstar booth, SourceSecurity.com were given an insight by Miriam Rautiainen into Senstar's new FlexZone, a fence-mounted sensor that detects and locates intruders. The FlexZone can also locate multiple intrusions simultaneously and is scalable, thus making it an easy and flexible option no matter how big or small the installation needs to be. With FlexZone, less equipment and infrastructure is required, adding to the flexibility of the product. Furthermore, rejecting false alarms is even easier with FlexZone than with Senstar's previous offerings. Miriam also mentioned the acquisition of Optellios earlier this year, which has allowed Senstar to expand on their fiber technology portfolio. Nedap SourceSecurity.com also attended a seminar at the Nedap stand about their collaboration with EE. EE has selected Nedap's AEOS security management platform as part of their plan to expand their business throughout the UK. Since the AEOS system is completely web-based, EE employees can access it from anywhere. Traka At the Traka stand, Tanveer Choudhry, Global Marketing Manager at Traka, gave us a demonstration of their new Traka 21 - a plug and play key management system designed for small to medium size businesses. The system is very user-friendly and easy to use, as Tanveer showed us. Furthermore, a PC connection isn't necessary as the Traka 21 can operate as a stand-alone. However, the system features a USB port, which allows employees to extract user data. The Traka 21 will be available later this year.
How To Ramp Up Perimeter Security With License Plate Reader TechnologyDownload
Solve Access Control Challenges in the Healthcare SectorDownload
Getting the Most Value From Software Subscription AgreementsDownload
Shifting Trends in Operation Centers and Control Rooms for 2021Download