Honeywell Video Systems HCD544PVX True Day/night High Resolution Colour Camera With 540 TVL

Technical Specification

Features:
  • Make: Honeywell Security
  • Model code: HCD544PVX
  • Chip Inch Size ": 1/3
  • Color Type: Color / Monochrome
  • Resolution TVL: 540
Read more
Additional info:

The Honeywell HCD544PVX true day/night camera is ideally suited for use in 24/7 surveillance applications. The HCD544PVX adapts to varying lighting conditions to ensure the highest quality picture even in very low light. When the light level drops too low for accurate video identification in colour, the camera automatically moves the IR cut filter out of the optical path and then switches to black and white video to capture more detail using the increased sensitivity of the CCD to IR light. The camera uses internal logic or an external LAMP connector to control the switchoverfrom colour to black and white. This improves the reliability of the operation of the camera in difficult installations or lighting conditions.

Read more
Make Honeywell Security
Manufacturer Honeywell
Model code HCD544PVX
Chip Inch Size " 1/3
Color Type Color / Monochrome
Resolution TVL 540
Digital (DSP) Yes
Auto Iris Yes
Direct Drive Yes
Sensitivity lux 0.1 @ F1.2
Lens Mount C/CS
Electrical Specifications Voltage: 12 V DC, 24 V AC
Power Consumption: 4.5 W
Focal Length mm 5.0 ~ 50
Mount Type Wall / Ceiling
Picture Elements HxV 752 x 582
Back Light Compensation Yes
Auto Gain Control Yes
White Balance Yes
Electronic Shutter range 1/50 ~ 1/100,000
S/ N (Signal/ Noise) Ratio dB 50
Synchronisation Line-lock
Signal Mode PAL
Video Output 1 Vp-p, 75 Ohms
Physical Specifications Weight g: 500
Environmental Specifications Operating Temperature oC: -10 ~ +50
Protection: Weather Resistant
Operating Humidity %: 0 ~ 85
Additional info The Honeywell HCD544PVX true day/night camera is ideally suited for use in 24/7 surveillance applications. The HCD544PVX adapts to varying lighting conditions to ensure the highest quality picture even in very low light. When the light level drops too low for accurate video identification in colour, the camera automatically moves the IR cut filter out of the optical path and then switches to black and white video to capture more detail using the increased sensitivity of the CCD to IR light. The camera uses internal logic or an external LAMP connector to control the switchoverfrom colour to black and white. This improves the reliability of the operation of the camera in difficult installations or lighting conditions.
Download PDF version