TeleEye Introduces CX780 Series Video Recording Server
Proprietary multi-stream video coding technology (SMAC-M)
TeleEye CX Series incorporates with SMAC-M, which is the first video coder in the market that outputs 5 optimal and independent digital video streams instead of a single one. SMAC-M compresses better and records 60% longer than MPEG-4. This saves HDD cost and reduces management headache for users.
Mobile video monitoring
By using TeleEye M-303 M-monitoring solution, instant video from TeleEye CX Series can be easily viewed on a mobile phone via 3G, GPRS, EDGE, HSDPA or WiFi. After plugging in USB Wireless 3G Modem to CX Series, video can be transmitted and play backed through mobile data network if fixed network is not available.
Simple & quick video extraction
Recorded CCTV video can be played back in any PC without any special software. Video can also be backed up simply by plugging in a USB flash drive to CX Series. With TeleEye Multi-site Video Reception software, up to 16 video recording servers can be handled for simultaneous monitoring and video recording.
Sophisticated event management
TeleEye CX Series responses to a wide range of events triggered by external alarm sensor, video motion, video loss, disk full, and hard disk failure. Actions include TCP/IP dial back, recording, buzzer, telemetry preset, relay control, and e-mail notification can be pre-set for different events.
TeleEye CX series application software:
- CMS - Central monitoring station software
- WX-30 - Single-site video reception software
- WX-M16 - 16-site video reception software
- M-303 - Video monitoring software for mobile phone
- CY-G100 - Cyber TeleEye video page generator
For specifications of other models, please click here.
|Manufacturer||TeleEye Europe Ltd.|
|No of Other Outputs||2|
|Interface||RJ-45, 10 / 100 Base-T Ethernet, UPNP, USB 2.0|
|Resolution TVL||720 x 576|
|System Requirements||Hardware and System related properties: Built-in web server|
Dimensions mm: 320 x 242 x 65
Weight g: 2,200
Power Consumption: 60W
Voltage: 12 VDC
Operating Temperature oC: 5 ~ 40
Operating Humidity %: 0 ~ 85
|Video Inputs Overview||Composite video, 1 Vp-p, BNC|
Recording mode: Manual, schedule, motion, event-driven. Relay switch: 1 channel; Momentary/Latch; 24V AC, 1000mA. Dynamic IP internet connection. HDD type: SATA Interface; Internal x 2. Signal mode: PAL / NTSC. 6 concurrent independent users. Max. transmission frame rate: 25/30 fps @ D1, 50/60 fps @ CIF. Telemetry control: camera port (RS-422/485, Asynchronous, 8 data bits, 1 stop bit, no parity, 2.4-19.2kbps). Event: alarm, motion, video loss, disk full, hard disk failure. Action: TCP/IP Dial back, Recording, Buzzer, Telemetry preset, Relay control, E-mail. External alarm inputs: 4 x NC/NO
|Download PDF version|